blob: ab55fbea2c6bb5b3a80473a06ed429048086753d [file] [log] [blame]
Jason Liuf5b81c82011-05-13 01:58:55 +00001/*
2 * Copyright (C) 2011 Freescale Semiconductor, Inc.
3 * Jason Liu <r64343@freescale.com>
4 *
5 * Configuration settings for Freescale MX53 low cost board.
6 *
Wolfgang Denkbd8ec7e2013-10-07 13:07:26 +02007 * SPDX-License-Identifier: GPL-2.0+
Jason Liuf5b81c82011-05-13 01:58:55 +00008 */
9
10#ifndef __CONFIG_H
11#define __CONFIG_H
12
13#define CONFIG_MX53
14
Jason Liuf5b81c82011-05-13 01:58:55 +000015#define CONFIG_DISPLAY_BOARDINFO
16
Fabio Estevamf3d62712011-09-22 08:07:19 +000017#define CONFIG_MACH_TYPE MACH_TYPE_MX53_LOCO
18
Jason Liuf5b81c82011-05-13 01:58:55 +000019#include <asm/arch/imx-regs.h>
20
21#define CONFIG_CMDLINE_TAG
Jason Liuf5b81c82011-05-13 01:58:55 +000022#define CONFIG_SETUP_MEMORY_TAGS
23#define CONFIG_INITRD_TAG
24
25/* Size of malloc() pool */
Fabio Estevam20c49da2012-05-10 15:07:35 +000026#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
Jason Liuf5b81c82011-05-13 01:58:55 +000027
28#define CONFIG_BOARD_EARLY_INIT_F
Fabio Estevamb665c832012-12-26 05:50:20 +000029#define CONFIG_BOARD_LATE_INIT
Jason Liuf5b81c82011-05-13 01:58:55 +000030#define CONFIG_MXC_GPIO
Fabio Estevam8b3533c2012-05-08 03:40:49 +000031#define CONFIG_REVISION_TAG
Jason Liuf5b81c82011-05-13 01:58:55 +000032
33#define CONFIG_MXC_UART
Stefano Babic1ca47d92011-11-22 15:22:39 +010034#define CONFIG_MXC_UART_BASE UART1_BASE
Jason Liuf5b81c82011-05-13 01:58:55 +000035
36/* MMC Configs */
37#define CONFIG_FSL_ESDHC
38#define CONFIG_SYS_FSL_ESDHC_ADDR 0
39#define CONFIG_SYS_FSL_ESDHC_NUM 2
40
41#define CONFIG_MMC
42#define CONFIG_CMD_MMC
43#define CONFIG_GENERIC_MMC
44#define CONFIG_CMD_FAT
Stefano Babic59dffd62012-02-22 00:24:41 +000045#define CONFIG_CMD_EXT2
Jason Liuf5b81c82011-05-13 01:58:55 +000046#define CONFIG_DOS_PARTITION
47
48/* Eth Configs */
Jason Liuf5b81c82011-05-13 01:58:55 +000049#define CONFIG_MII
Jason Liuf5b81c82011-05-13 01:58:55 +000050
51#define CONFIG_FEC_MXC
52#define IMX_FEC_BASE FEC_BASE_ADDR
53#define CONFIG_FEC_MXC_PHYADDR 0x1F
54
55#define CONFIG_CMD_PING
56#define CONFIG_CMD_DHCP
57#define CONFIG_CMD_MII
58#define CONFIG_CMD_NET
59
Wolfgang Grandeggerfde87332011-11-11 14:03:37 +010060/* USB Configs */
61#define CONFIG_CMD_USB
62#define CONFIG_CMD_FAT
63#define CONFIG_USB_EHCI
64#define CONFIG_USB_EHCI_MX5
65#define CONFIG_USB_STORAGE
66#define CONFIG_USB_HOST_ETHER
67#define CONFIG_USB_ETHER_ASIX
68#define CONFIG_USB_ETHER_SMSC95XX
69#define CONFIG_MXC_USB_PORT 1
70#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
71#define CONFIG_MXC_USB_FLAGS 0
72
Fabio Estevam2fc58322012-04-30 08:12:04 +000073/* I2C Configs */
trem03997412013-09-21 18:13:36 +020074#define CONFIG_SYS_I2C
75#define CONFIG_SYS_I2C_MXC
76#define CONFIG_SYS_SPD_BUS_NUM 0 /* I2C1 */
Fabio Estevam2fc58322012-04-30 08:12:04 +000077
78/* PMIC Controller */
Łukasz Majewski1b6d9ed2012-11-13 03:22:14 +000079#define CONFIG_POWER
80#define CONFIG_POWER_I2C
Łukasz Majewski1fc10032012-11-13 03:22:15 +000081#define CONFIG_DIALOG_POWER
Łukasz Majewski1b6d9ed2012-11-13 03:22:14 +000082#define CONFIG_POWER_FSL
Fabio Estevam57c922b2012-10-23 06:34:50 +000083#define CONFIG_PMIC_FSL_MC13892
Fabio Estevam2fc58322012-04-30 08:12:04 +000084#define CONFIG_SYS_DIALOG_PMIC_I2C_ADDR 0x48
Fabio Estevam082a1122012-05-07 10:25:59 +000085#define CONFIG_SYS_FSL_PMIC_I2C_ADDR 0x8
Fabio Estevam2fc58322012-04-30 08:12:04 +000086
Jason Liuf5b81c82011-05-13 01:58:55 +000087/* allow to overwrite serial and ethaddr */
88#define CONFIG_ENV_OVERWRITE
89#define CONFIG_CONS_INDEX 1
90#define CONFIG_BAUDRATE 115200
Jason Liuf5b81c82011-05-13 01:58:55 +000091
92/* Command definition */
93#include <config_cmd_default.h>
Fabio Estevam13f68292012-10-24 09:44:26 +000094#define CONFIG_CMD_BOOTZ
Jason Liuf5b81c82011-05-13 01:58:55 +000095
96#undef CONFIG_CMD_IMLS
97
Fabio Estevamd7567712012-11-16 05:09:04 +000098#define CONFIG_BOOTDELAY 1
Jason Liuf5b81c82011-05-13 01:58:55 +000099
Wolfgang Grandegger96529e22011-10-17 08:21:56 +0000100#define CONFIG_ETHPRIME "FEC0"
Jason Liuf5b81c82011-05-13 01:58:55 +0000101
Otavio Salvador14f36922012-12-21 06:59:05 +0000102#define CONFIG_LOADADDR 0x72000000 /* loadaddr env var */
Jason Liuf5b81c82011-05-13 01:58:55 +0000103#define CONFIG_SYS_TEXT_BASE 0x77800000
104
105#define CONFIG_EXTRA_ENV_SETTINGS \
106 "script=boot.scr\0" \
107 "uimage=uImage\0" \
Otavio Salvador66f2a6e2013-01-10 09:45:07 +0000108 "fdt_file=imx53-qsb.dtb\0" \
109 "fdt_addr=0x71000000\0" \
110 "boot_fdt=try\0" \
111 "ip_dyn=yes\0" \
Jason Liuf5b81c82011-05-13 01:58:55 +0000112 "mmcdev=0\0" \
Otavio Salvador8f0dde72013-06-28 18:52:39 -0300113 "mmcpart=1\0" \
114 "mmcroot=/dev/mmcblk0p2 rw rootwait\0" \
Otavio Salvador66f2a6e2013-01-10 09:45:07 +0000115 "mmcargs=setenv bootargs console=ttymxc0,${baudrate} root=${mmcroot}\0" \
Jason Liuf5b81c82011-05-13 01:58:55 +0000116 "loadbootscript=" \
117 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
118 "bootscript=echo Running bootscript from mmc ...; " \
119 "source\0" \
120 "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
Otavio Salvador66f2a6e2013-01-10 09:45:07 +0000121 "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
Jason Liuf5b81c82011-05-13 01:58:55 +0000122 "mmcboot=echo Booting from mmc ...; " \
123 "run mmcargs; " \
Otavio Salvador66f2a6e2013-01-10 09:45:07 +0000124 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
125 "if run loadfdt; then " \
126 "bootm ${loadaddr} - ${fdt_addr}; " \
127 "else " \
128 "if test ${boot_fdt} = try; then " \
129 "bootm; " \
130 "else " \
131 "echo WARN: Cannot load the DT; " \
132 "fi; " \
133 "fi; " \
134 "else " \
135 "bootm; " \
136 "fi;\0" \
Jason Liuf5b81c82011-05-13 01:58:55 +0000137 "netargs=setenv bootargs console=ttymxc0,${baudrate} " \
138 "root=/dev/nfs " \
139 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
140 "netboot=echo Booting from net ...; " \
141 "run netargs; " \
Otavio Salvador66f2a6e2013-01-10 09:45:07 +0000142 "if test ${ip_dyn} = yes; then " \
143 "setenv get_cmd dhcp; " \
144 "else " \
145 "setenv get_cmd tftp; " \
146 "fi; " \
147 "${get_cmd} ${uimage}; " \
148 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
149 "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
150 "bootm ${loadaddr} - ${fdt_addr}; " \
151 "else " \
152 "if test ${boot_fdt} = try; then " \
153 "bootm; " \
154 "else " \
155 "echo ERROR: Cannot load the DT; " \
156 "exit; " \
157 "fi; " \
158 "fi; " \
159 "else " \
160 "bootm; " \
161 "fi;\0"
Jason Liuf5b81c82011-05-13 01:58:55 +0000162
163#define CONFIG_BOOTCOMMAND \
Andrew Bradforde1c7c8a2012-10-01 05:06:52 +0000164 "mmc dev ${mmcdev}; if mmc rescan; then " \
Jason Liuf5b81c82011-05-13 01:58:55 +0000165 "if run loadbootscript; then " \
166 "run bootscript; " \
167 "else " \
168 "if run loaduimage; then " \
169 "run mmcboot; " \
170 "else run netboot; " \
171 "fi; " \
172 "fi; " \
173 "else run netboot; fi"
174
175#define CONFIG_ARP_TIMEOUT 200UL
176
177/* Miscellaneous configurable options */
178#define CONFIG_SYS_LONGHELP /* undef to save memory */
179#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
Jason Liuf5b81c82011-05-13 01:58:55 +0000180#define CONFIG_SYS_PROMPT "MX53LOCO U-Boot > "
181#define CONFIG_AUTO_COMPLETE
Otavio Salvador66f2a6e2013-01-10 09:45:07 +0000182#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
Jason Liuf5b81c82011-05-13 01:58:55 +0000183
184/* Print Buffer Size */
185#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
186#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
187#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
188
189#define CONFIG_SYS_MEMTEST_START 0x70000000
190#define CONFIG_SYS_MEMTEST_END 0x70010000
191
192#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
193
Jason Liuf5b81c82011-05-13 01:58:55 +0000194#define CONFIG_CMDLINE_EDITING
195
Jason Liuf5b81c82011-05-13 01:58:55 +0000196/* Physical Memory Map */
197#define CONFIG_NR_DRAM_BANKS 2
198#define PHYS_SDRAM_1 CSD0_BASE_ADDR
199#define PHYS_SDRAM_1_SIZE (512 * 1024 * 1024)
200#define PHYS_SDRAM_2 CSD1_BASE_ADDR
201#define PHYS_SDRAM_2_SIZE (512 * 1024 * 1024)
202#define PHYS_SDRAM_SIZE (PHYS_SDRAM_1_SIZE + PHYS_SDRAM_2_SIZE)
203
204#define CONFIG_SYS_SDRAM_BASE (PHYS_SDRAM_1)
205#define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR)
206#define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE)
207
208#define CONFIG_SYS_INIT_SP_OFFSET \
209 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
210#define CONFIG_SYS_INIT_SP_ADDR \
211 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
212
213/* FLASH and environment organization */
214#define CONFIG_SYS_NO_FLASH
215
216#define CONFIG_ENV_OFFSET (6 * 64 * 1024)
217#define CONFIG_ENV_SIZE (8 * 1024)
218#define CONFIG_ENV_IS_IN_MMC
219#define CONFIG_SYS_MMC_ENV_DEV 0
220
221#define CONFIG_OF_LIBFDT
Jason Liuf5b81c82011-05-13 01:58:55 +0000222
Stefano Babic59dffd62012-02-22 00:24:41 +0000223#define CONFIG_CMD_SATA
224#ifdef CONFIG_CMD_SATA
225 #define CONFIG_DWC_AHSATA
226 #define CONFIG_SYS_SATA_MAX_DEVICE 1
227 #define CONFIG_DWC_AHSATA_PORT_ID 0
228 #define CONFIG_DWC_AHSATA_BASE_ADDR SATA_BASE_ADDR
229 #define CONFIG_LBA48
230 #define CONFIG_LIBATA
231#endif
232
Fabio Estevam20c49da2012-05-10 15:07:35 +0000233/* Framebuffer and LCD */
234#define CONFIG_PREBOOT
235#define CONFIG_VIDEO
Fabio Estevamc6dd2e02012-05-31 07:23:56 +0000236#define CONFIG_VIDEO_IPUV3
Fabio Estevam20c49da2012-05-10 15:07:35 +0000237#define CONFIG_CFB_CONSOLE
238#define CONFIG_VGA_AS_SINGLE_DEVICE
Stefano Babiccbf6c9c2012-08-05 00:18:53 +0000239#define CONFIG_SYS_CONSOLE_IS_IN_ENV
240#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
Fabio Estevam20c49da2012-05-10 15:07:35 +0000241#define CONFIG_VIDEO_BMP_RLE8
242#define CONFIG_SPLASH_SCREEN
243#define CONFIG_BMP_16BPP
244#define CONFIG_VIDEO_LOGO
Fabio Estevam56627292012-10-15 05:37:17 +0000245#define CONFIG_IPUV3_CLK 200000000
Fabio Estevam20c49da2012-05-10 15:07:35 +0000246
Jason Liuf5b81c82011-05-13 01:58:55 +0000247#endif /* __CONFIG_H */