blob: 3ea64f7e944fa3674a6bd1db3267126b6026ebb7 [file] [log] [blame]
Tom Rinicb896f52018-07-13 09:05:05 -04001// SPDX-License-Identifier: GPL-2.0+
Ley Foon Tan3305ba72018-05-24 00:17:27 +08002/*
3 * Copyright (C) 2012 Altera Corporation <www.altera.com>
Ley Foon Tan3305ba72018-05-24 00:17:27 +08004 */
5
6#include <common.h>
7#include <asm/io.h>
8#include <asm/pl310.h>
9#include <asm/u-boot.h>
10#include <asm/utils.h>
11#include <image.h>
12#include <asm/arch/reset_manager.h>
13#include <spl.h>
14#include <asm/arch/system_manager.h>
15#include <asm/arch/freeze_controller.h>
16#include <asm/arch/clock_manager.h>
17#include <asm/arch/scan_manager.h>
18#include <asm/arch/sdram.h>
19#include <asm/arch/scu.h>
Marek Vasut95db8ee2018-07-30 13:58:54 +020020#include <asm/arch/misc.h>
Ley Foon Tan3305ba72018-05-24 00:17:27 +080021#include <asm/arch/nic301.h>
22#include <asm/sections.h>
23#include <fdtdec.h>
24#include <watchdog.h>
25#include <asm/arch/pinmux.h>
26
27DECLARE_GLOBAL_DATA_PTR;
28
29static const struct socfpga_system_manager *sysmgr_regs =
30 (struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS;
31
32u32 spl_boot_device(void)
33{
34 const u32 bsel = readl(&sysmgr_regs->bootinfo);
35
36 switch (SYSMGR_GET_BOOTINFO_BSEL(bsel)) {
37 case 0x1: /* FPGA (HPS2FPGA Bridge) */
38 return BOOT_DEVICE_RAM;
39 case 0x2: /* NAND Flash (1.8V) */
40 case 0x3: /* NAND Flash (3.0V) */
41 socfpga_per_reset(SOCFPGA_RESET(NAND), 0);
42 return BOOT_DEVICE_NAND;
43 case 0x4: /* SD/MMC External Transceiver (1.8V) */
44 case 0x5: /* SD/MMC Internal Transceiver (3.0V) */
45 socfpga_per_reset(SOCFPGA_RESET(SDMMC), 0);
46 socfpga_per_reset(SOCFPGA_RESET(DMA), 0);
47 return BOOT_DEVICE_MMC1;
48 case 0x6: /* QSPI Flash (1.8V) */
49 case 0x7: /* QSPI Flash (3.0V) */
50 socfpga_per_reset(SOCFPGA_RESET(QSPI), 0);
51 return BOOT_DEVICE_SPI;
52 default:
53 printf("Invalid boot device (bsel=%08x)!\n", bsel);
54 hang();
55 }
56}
57
58#ifdef CONFIG_SPL_MMC_SUPPORT
59u32 spl_boot_mode(const u32 boot_device)
60{
61#if defined(CONFIG_SPL_FAT_SUPPORT) || defined(CONFIG_SPL_EXT_SUPPORT)
62 return MMCSD_MODE_FS;
63#else
64 return MMCSD_MODE_RAW;
65#endif
66}
67#endif
68
69void spl_board_init(void)
70{
Ley Foon Tan3305ba72018-05-24 00:17:27 +080071 /* enable console uart printing */
72 preloader_console_init();
Marek Vasut95db8ee2018-07-30 13:58:54 +020073 WATCHDOG_RESET();
74
Marek Vasut8fdb4192018-08-18 19:11:52 +020075 arch_early_init_r();
Ley Foon Tan3305ba72018-05-24 00:17:27 +080076}
77
78void board_init_f(ulong dummy)
79{
Marek Vasut8fdb4192018-08-18 19:11:52 +020080 socfpga_init_security_policies();
81 socfpga_sdram_remap_zero();
Ley Foon Tan3305ba72018-05-24 00:17:27 +080082
Marek Vasut8fdb4192018-08-18 19:11:52 +020083 /* Assert reset to all except L4WD0 and L4TIMER0 */
84 socfpga_per_reset_all();
Ley Foon Tan3305ba72018-05-24 00:17:27 +080085 socfpga_watchdog_disable();
86
Marek Vasut8fdb4192018-08-18 19:11:52 +020087 spl_early_init();
88
89 /* Configure the clock based on handoff */
90 cm_basic_init(gd->fdt_blob);
Ley Foon Tan3305ba72018-05-24 00:17:27 +080091
92#ifdef CONFIG_HW_WATCHDOG
93 /* release osc1 watchdog timer 0 from reset */
94 socfpga_reset_deassert_osc1wd0();
95
96 /* reconfigure and enable the watchdog */
97 hw_watchdog_init();
98 WATCHDOG_RESET();
99#endif /* CONFIG_HW_WATCHDOG */
Marek Vasut8fdb4192018-08-18 19:11:52 +0200100
101 config_dedicated_pins(gd->fdt_blob);
102 WATCHDOG_RESET();
Ley Foon Tan3305ba72018-05-24 00:17:27 +0800103}