Manoj Sai | 3ef43cb | 2022-08-26 18:03:36 +0530 | [diff] [blame^] | 1 | // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 | /* |
| 3 | * Copyright (c) 2018 NXP |
| 4 | * Copyright (c) 2019 Engicam srl |
| 5 | * Copyright (c) 2020 Amarula Solutons(India) |
| 6 | */ |
| 7 | |
| 8 | /dts-v1/; |
| 9 | |
| 10 | #include "imx8mp.dtsi" |
| 11 | #include "imx8mp-icore-mx8mp.dtsi" |
| 12 | #include <dt-bindings/usb/pd.h> |
| 13 | |
| 14 | / { |
| 15 | model = "Engicam i.Core MX8M Plus EDIMM2.2 Starter Kit"; |
| 16 | compatible = "engicam,icore-mx8mp-edimm2.2", "engicam,icore-mx8mp", |
| 17 | "fsl,imx8mp"; |
| 18 | |
| 19 | chosen { |
| 20 | stdout-path = &uart2; |
| 21 | }; |
| 22 | |
| 23 | reg_usb1_vbus: regulator-usb1 { |
| 24 | compatible = "regulator-fixed"; |
| 25 | enable-active-high; |
| 26 | gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>; |
| 27 | pinctrl-names = "default"; |
| 28 | pinctrl-0 = <&pinctrl_reg_usb1>; |
| 29 | regulator-max-microvolt = <5000000>; |
| 30 | regulator-min-microvolt = <5000000>; |
| 31 | regulator-name = "usb1_host_vbus"; |
| 32 | }; |
| 33 | |
| 34 | reg_usdhc2_vmmc: regulator-usdhc2 { |
| 35 | compatible = "regulator-fixed"; |
| 36 | enable-active-high; |
| 37 | gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; |
| 38 | pinctrl-names = "default"; |
| 39 | pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; |
| 40 | regulator-max-microvolt = <3300000>; |
| 41 | regulator-min-microvolt = <3300000>; |
| 42 | regulator-name = "VSD_3V3"; |
| 43 | }; |
| 44 | }; |
| 45 | |
| 46 | /* Ethernet */ |
| 47 | &eqos { |
| 48 | pinctrl-names = "default"; |
| 49 | pinctrl-0 = <&pinctrl_eqos>; |
| 50 | phy-handle = <ðphy0>; |
| 51 | phy-mode = "rgmii-id"; |
| 52 | status = "okay"; |
| 53 | |
| 54 | mdio { |
| 55 | compatible = "snps,dwmac-mdio"; |
| 56 | #address-cells = <1>; |
| 57 | #size-cells = <0>; |
| 58 | |
| 59 | ethphy0: ethernet-phy@7 { |
| 60 | compatible = "ethernet-phy-ieee802.3-c22"; |
| 61 | micrel,led-mode = <0>; |
| 62 | reg = <7>; |
| 63 | }; |
| 64 | }; |
| 65 | }; |
| 66 | |
| 67 | /* console */ |
| 68 | &uart2 { |
| 69 | pinctrl-names = "default"; |
| 70 | pinctrl-0 = <&pinctrl_uart2>; |
| 71 | status = "okay"; |
| 72 | }; |
| 73 | |
| 74 | &usb3_phy0 { |
| 75 | status = "okay"; |
| 76 | }; |
| 77 | |
| 78 | &usb3_0 { |
| 79 | status = "okay"; |
| 80 | }; |
| 81 | |
| 82 | &usb_dwc3_0 { |
| 83 | dr_mode = "host"; |
| 84 | status = "okay"; |
| 85 | }; |
| 86 | |
| 87 | &usb3_phy1 { |
| 88 | status = "okay"; |
| 89 | }; |
| 90 | |
| 91 | &usb3_1 { |
| 92 | status = "okay"; |
| 93 | }; |
| 94 | |
| 95 | &usb_dwc3_1 { |
| 96 | dr_mode = "host"; |
| 97 | status = "okay"; |
| 98 | }; |
| 99 | |
| 100 | /* SDCARD */ |
| 101 | &usdhc2 { |
| 102 | cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; |
| 103 | bus-width = <4>; |
| 104 | pinctrl-names = "default" ; |
| 105 | pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; |
| 106 | vmmc-supply = <®_usdhc2_vmmc>; |
| 107 | status = "okay"; |
| 108 | }; |
| 109 | |
| 110 | &iomuxc { |
| 111 | pinctrl_eqos: eqosgrp { |
| 112 | fsl,pins = < |
| 113 | MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x2 |
| 114 | MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x2 |
| 115 | MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x90 |
| 116 | MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x90 |
| 117 | MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x90 |
| 118 | MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x90 |
| 119 | MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x90 |
| 120 | MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x90 |
| 121 | MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x16 |
| 122 | MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x16 |
| 123 | MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x16 |
| 124 | MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x16 |
| 125 | MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x16 |
| 126 | MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x16 |
| 127 | MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07 0x10 |
| 128 | >; |
| 129 | }; |
| 130 | |
| 131 | pinctrl_uart2: uart2grp { |
| 132 | fsl,pins = < |
| 133 | MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x40 |
| 134 | MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x40 |
| 135 | >; |
| 136 | }; |
| 137 | |
| 138 | pinctrl_uart3: uart3grp { |
| 139 | fsl,pins = < |
| 140 | MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX 0x140 |
| 141 | MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX 0x140 |
| 142 | MX8MP_IOMUXC_SD1_STROBE__UART3_DCE_CTS 0x140 |
| 143 | >; |
| 144 | }; |
| 145 | |
| 146 | pinctrl_usdhc2: usdhc2grp { |
| 147 | fsl,pins = < |
| 148 | MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190 |
| 149 | MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0 |
| 150 | MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0 |
| 151 | MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0 |
| 152 | MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0 |
| 153 | MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0 |
| 154 | MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0 |
| 155 | >; |
| 156 | }; |
| 157 | |
| 158 | pinctrl_usdhc2_gpio: usdhc2gpiogrp { |
| 159 | fsl,pins = < |
| 160 | MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x1c4 |
| 161 | >; |
| 162 | }; |
| 163 | |
| 164 | pinctrl_reg_usb1: regusb1grp { |
| 165 | fsl,pins = < |
| 166 | MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14 0x10 |
| 167 | >; |
| 168 | }; |
| 169 | |
| 170 | pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { |
| 171 | fsl,pins = < |
| 172 | MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x40 |
| 173 | >; |
| 174 | }; |
| 175 | }; |