| Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 1 | # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| 2 | # Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/ |
| 3 | %YAML 1.2 |
| 4 | --- |
| 5 | $id: http://devicetree.org/schemas/pci/ti,j721e-pci-host.yaml# |
| 6 | $schema: http://devicetree.org/meta-schemas/core.yaml# |
| 7 | |
| 8 | title: TI J721E PCI Host (PCIe Wrapper) |
| 9 | |
| 10 | maintainers: |
| 11 | - Kishon Vijay Abraham I <kishon@ti.com> |
| 12 | |
| 13 | allOf: |
| 14 | - $ref: cdns-pcie-host.yaml# |
| 15 | |
| 16 | properties: |
| 17 | compatible: |
| 18 | oneOf: |
| 19 | - const: ti,j721e-pcie-host |
| 20 | - description: PCIe controller in AM64 |
| 21 | items: |
| 22 | - const: ti,am64-pcie-host |
| 23 | - const: ti,j721e-pcie-host |
| 24 | - description: PCIe controller in J7200 |
| 25 | items: |
| 26 | - const: ti,j7200-pcie-host |
| 27 | - const: ti,j721e-pcie-host |
| 28 | |
| 29 | reg: |
| 30 | maxItems: 4 |
| 31 | |
| 32 | reg-names: |
| 33 | items: |
| 34 | - const: intd_cfg |
| 35 | - const: user_cfg |
| 36 | - const: reg |
| 37 | - const: cfg |
| 38 | |
| 39 | ti,syscon-pcie-ctrl: |
| 40 | $ref: /schemas/types.yaml#/definitions/phandle-array |
| 41 | items: |
| 42 | - items: |
| 43 | - description: Phandle to the SYSCON entry |
| 44 | - description: pcie_ctrl register offset within SYSCON |
| 45 | description: Specifier for configuring PCIe mode and link speed. |
| 46 | |
| 47 | power-domains: |
| 48 | maxItems: 1 |
| 49 | |
| 50 | clocks: |
| 51 | minItems: 1 |
| 52 | maxItems: 2 |
| 53 | description: |+ |
| 54 | clock-specifier to represent input to the PCIe for 1 item. |
| 55 | 2nd item if present represents reference clock to the connector. |
| 56 | |
| 57 | clock-names: |
| 58 | minItems: 1 |
| 59 | items: |
| 60 | - const: fck |
| 61 | - const: pcie_refclk |
| 62 | |
| 63 | dma-coherent: true |
| 64 | |
| 65 | vendor-id: |
| 66 | const: 0x104c |
| 67 | |
| 68 | device-id: |
| 69 | enum: |
| 70 | - 0xb00d |
| 71 | - 0xb00f |
| 72 | - 0xb010 |
| 73 | - 0xb013 |
| 74 | |
| 75 | msi-map: true |
| 76 | |
| 77 | interrupts: |
| 78 | maxItems: 1 |
| 79 | |
| 80 | interrupt-names: |
| 81 | items: |
| 82 | - const: link_state |
| 83 | |
| 84 | interrupt-controller: |
| 85 | type: object |
| 86 | additionalProperties: false |
| 87 | |
| 88 | properties: |
| 89 | interrupt-controller: true |
| 90 | |
| 91 | '#interrupt-cells': |
| 92 | const: 1 |
| 93 | |
| 94 | interrupts: |
| 95 | maxItems: 1 |
| 96 | |
| 97 | required: |
| 98 | - compatible |
| 99 | - reg |
| 100 | - reg-names |
| 101 | - ti,syscon-pcie-ctrl |
| 102 | - max-link-speed |
| 103 | - num-lanes |
| 104 | - power-domains |
| 105 | - clocks |
| 106 | - clock-names |
| 107 | - vendor-id |
| 108 | - device-id |
| 109 | - msi-map |
| 110 | - dma-ranges |
| 111 | - ranges |
| 112 | - reset-gpios |
| 113 | - phys |
| 114 | - phy-names |
| 115 | |
| 116 | unevaluatedProperties: false |
| 117 | |
| 118 | examples: |
| 119 | - | |
| 120 | #include <dt-bindings/soc/ti,sci_pm_domain.h> |
| 121 | #include <dt-bindings/gpio/gpio.h> |
| 122 | |
| 123 | bus { |
| 124 | #address-cells = <2>; |
| 125 | #size-cells = <2>; |
| 126 | |
| 127 | pcie0_rc: pcie@2900000 { |
| 128 | compatible = "ti,j721e-pcie-host"; |
| 129 | reg = <0x00 0x02900000 0x00 0x1000>, |
| 130 | <0x00 0x02907000 0x00 0x400>, |
| 131 | <0x00 0x0d000000 0x00 0x00800000>, |
| 132 | <0x00 0x10000000 0x00 0x00001000>; |
| 133 | reg-names = "intd_cfg", "user_cfg", "reg", "cfg"; |
| 134 | ti,syscon-pcie-ctrl = <&pcie0_ctrl 0x4070>; |
| 135 | max-link-speed = <3>; |
| 136 | num-lanes = <2>; |
| 137 | power-domains = <&k3_pds 239 TI_SCI_PD_EXCLUSIVE>; |
| 138 | clocks = <&k3_clks 239 1>; |
| 139 | clock-names = "fck"; |
| 140 | device_type = "pci"; |
| 141 | #address-cells = <3>; |
| 142 | #size-cells = <2>; |
| 143 | bus-range = <0x0 0xf>; |
| 144 | vendor-id = <0x104c>; |
| 145 | device-id = <0xb00d>; |
| 146 | msi-map = <0x0 &gic_its 0x0 0x10000>; |
| 147 | dma-coherent; |
| 148 | reset-gpios = <&exp1 6 GPIO_ACTIVE_HIGH>; |
| 149 | phys = <&serdes0_pcie_link>; |
| 150 | phy-names = "pcie-phy"; |
| 151 | ranges = <0x01000000 0x0 0x10001000 0x00 0x10001000 0x0 0x0010000>, |
| 152 | <0x02000000 0x0 0x10011000 0x00 0x10011000 0x0 0x7fef000>; |
| 153 | dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>; |
| 154 | }; |
| 155 | }; |