Michael Kurz | 337ff2a | 2017-01-22 16:04:30 +0100 | [diff] [blame] | 1 | /* |
| 2 | * (C) Copyright 2016 |
| 3 | * |
| 4 | * Michael Kurz, <michi.kurz@gmail.com> |
| 5 | * |
| 6 | * STM32 QSPI driver |
| 7 | * |
| 8 | * SPDX-License-Identifier: GPL-2.0+ |
| 9 | */ |
| 10 | |
| 11 | #include <common.h> |
| 12 | #include <malloc.h> |
| 13 | #include <spi.h> |
| 14 | #include <spi_flash.h> |
| 15 | #include <asm/io.h> |
| 16 | #include <dm.h> |
| 17 | #include <errno.h> |
| 18 | #include <asm/arch/stm32.h> |
| 19 | #include <asm/arch/stm32_defs.h> |
| 20 | |
| 21 | DECLARE_GLOBAL_DATA_PTR; |
| 22 | |
| 23 | struct stm32_qspi_regs { |
| 24 | u32 cr; /* 0x00 */ |
| 25 | u32 dcr; /* 0x04 */ |
| 26 | u32 sr; /* 0x08 */ |
| 27 | u32 fcr; /* 0x0C */ |
| 28 | u32 dlr; /* 0x10 */ |
| 29 | u32 ccr; /* 0x14 */ |
| 30 | u32 ar; /* 0x18 */ |
| 31 | u32 abr; /* 0x1C */ |
| 32 | u32 dr; /* 0x20 */ |
| 33 | u32 psmkr; /* 0x24 */ |
| 34 | u32 psmar; /* 0x28 */ |
| 35 | u32 pir; /* 0x2C */ |
| 36 | u32 lptr; /* 0x30 */ |
| 37 | }; |
| 38 | |
| 39 | /* |
| 40 | * QUADSPI control register |
| 41 | */ |
| 42 | #define STM32_QSPI_CR_EN BIT(0) |
| 43 | #define STM32_QSPI_CR_ABORT BIT(1) |
| 44 | #define STM32_QSPI_CR_DMAEN BIT(2) |
| 45 | #define STM32_QSPI_CR_TCEN BIT(3) |
| 46 | #define STM32_QSPI_CR_SSHIFT BIT(4) |
| 47 | #define STM32_QSPI_CR_DFM BIT(6) |
| 48 | #define STM32_QSPI_CR_FSEL BIT(7) |
| 49 | #define STM32_QSPI_CR_FTHRES_MASK GENMASK(4, 0) |
| 50 | #define STM32_QSPI_CR_FTHRES_SHIFT (8) |
| 51 | #define STM32_QSPI_CR_TEIE BIT(16) |
| 52 | #define STM32_QSPI_CR_TCIE BIT(17) |
| 53 | #define STM32_QSPI_CR_FTIE BIT(18) |
| 54 | #define STM32_QSPI_CR_SMIE BIT(19) |
| 55 | #define STM32_QSPI_CR_TOIE BIT(20) |
| 56 | #define STM32_QSPI_CR_APMS BIT(22) |
| 57 | #define STM32_QSPI_CR_PMM BIT(23) |
| 58 | #define STM32_QSPI_CR_PRESCALER_MASK GENMASK(7, 0) |
| 59 | #define STM32_QSPI_CR_PRESCALER_SHIFT (24) |
| 60 | |
| 61 | /* |
| 62 | * QUADSPI device configuration register |
| 63 | */ |
| 64 | #define STM32_QSPI_DCR_CKMODE BIT(0) |
| 65 | #define STM32_QSPI_DCR_CSHT_MASK GENMASK(2, 0) |
| 66 | #define STM32_QSPI_DCR_CSHT_SHIFT (8) |
| 67 | #define STM32_QSPI_DCR_FSIZE_MASK GENMASK(4, 0) |
| 68 | #define STM32_QSPI_DCR_FSIZE_SHIFT (16) |
| 69 | |
| 70 | /* |
| 71 | * QUADSPI status register |
| 72 | */ |
| 73 | #define STM32_QSPI_SR_TEF BIT(0) |
| 74 | #define STM32_QSPI_SR_TCF BIT(1) |
| 75 | #define STM32_QSPI_SR_FTF BIT(2) |
| 76 | #define STM32_QSPI_SR_SMF BIT(3) |
| 77 | #define STM32_QSPI_SR_TOF BIT(4) |
| 78 | #define STM32_QSPI_SR_BUSY BIT(5) |
| 79 | #define STM32_QSPI_SR_FLEVEL_MASK GENMASK(5, 0) |
| 80 | #define STM32_QSPI_SR_FLEVEL_SHIFT (8) |
| 81 | |
| 82 | /* |
| 83 | * QUADSPI flag clear register |
| 84 | */ |
| 85 | #define STM32_QSPI_FCR_CTEF BIT(0) |
| 86 | #define STM32_QSPI_FCR_CTCF BIT(1) |
| 87 | #define STM32_QSPI_FCR_CSMF BIT(3) |
| 88 | #define STM32_QSPI_FCR_CTOF BIT(4) |
| 89 | |
| 90 | /* |
| 91 | * QUADSPI communication configuration register |
| 92 | */ |
| 93 | #define STM32_QSPI_CCR_DDRM BIT(31) |
| 94 | #define STM32_QSPI_CCR_DHHC BIT(30) |
| 95 | #define STM32_QSPI_CCR_SIOO BIT(28) |
| 96 | #define STM32_QSPI_CCR_FMODE_SHIFT (26) |
| 97 | #define STM32_QSPI_CCR_DMODE_SHIFT (24) |
| 98 | #define STM32_QSPI_CCR_DCYC_SHIFT (18) |
| 99 | #define STM32_QSPI_CCR_DCYC_MASK GENMASK(4, 0) |
| 100 | #define STM32_QSPI_CCR_ABSIZE_SHIFT (16) |
| 101 | #define STM32_QSPI_CCR_ABMODE_SHIFT (14) |
| 102 | #define STM32_QSPI_CCR_ADSIZE_SHIFT (12) |
| 103 | #define STM32_QSPI_CCR_ADMODE_SHIFT (10) |
| 104 | #define STM32_QSPI_CCR_IMODE_SHIFT (8) |
| 105 | #define STM32_QSPI_CCR_INSTRUCTION_MASK GENMASK(7, 0) |
| 106 | |
| 107 | enum STM32_QSPI_CCR_IMODE { |
| 108 | STM32_QSPI_CCR_IMODE_NONE = 0, |
| 109 | STM32_QSPI_CCR_IMODE_ONE_LINE = 1, |
| 110 | STM32_QSPI_CCR_IMODE_TWO_LINE = 2, |
| 111 | STM32_QSPI_CCR_IMODE_FOUR_LINE = 3, |
| 112 | }; |
| 113 | |
| 114 | enum STM32_QSPI_CCR_ADMODE { |
| 115 | STM32_QSPI_CCR_ADMODE_NONE = 0, |
| 116 | STM32_QSPI_CCR_ADMODE_ONE_LINE = 1, |
| 117 | STM32_QSPI_CCR_ADMODE_TWO_LINE = 2, |
| 118 | STM32_QSPI_CCR_ADMODE_FOUR_LINE = 3, |
| 119 | }; |
| 120 | |
| 121 | enum STM32_QSPI_CCR_ADSIZE { |
| 122 | STM32_QSPI_CCR_ADSIZE_8BIT = 0, |
| 123 | STM32_QSPI_CCR_ADSIZE_16BIT = 1, |
| 124 | STM32_QSPI_CCR_ADSIZE_24BIT = 2, |
| 125 | STM32_QSPI_CCR_ADSIZE_32BIT = 3, |
| 126 | }; |
| 127 | |
| 128 | enum STM32_QSPI_CCR_ABMODE { |
| 129 | STM32_QSPI_CCR_ABMODE_NONE = 0, |
| 130 | STM32_QSPI_CCR_ABMODE_ONE_LINE = 1, |
| 131 | STM32_QSPI_CCR_ABMODE_TWO_LINE = 2, |
| 132 | STM32_QSPI_CCR_ABMODE_FOUR_LINE = 3, |
| 133 | }; |
| 134 | |
| 135 | enum STM32_QSPI_CCR_ABSIZE { |
| 136 | STM32_QSPI_CCR_ABSIZE_8BIT = 0, |
| 137 | STM32_QSPI_CCR_ABSIZE_16BIT = 1, |
| 138 | STM32_QSPI_CCR_ABSIZE_24BIT = 2, |
| 139 | STM32_QSPI_CCR_ABSIZE_32BIT = 3, |
| 140 | }; |
| 141 | |
| 142 | enum STM32_QSPI_CCR_DMODE { |
| 143 | STM32_QSPI_CCR_DMODE_NONE = 0, |
| 144 | STM32_QSPI_CCR_DMODE_ONE_LINE = 1, |
| 145 | STM32_QSPI_CCR_DMODE_TWO_LINE = 2, |
| 146 | STM32_QSPI_CCR_DMODE_FOUR_LINE = 3, |
| 147 | }; |
| 148 | |
| 149 | enum STM32_QSPI_CCR_FMODE { |
| 150 | STM32_QSPI_CCR_IND_WRITE = 0, |
| 151 | STM32_QSPI_CCR_IND_READ = 1, |
| 152 | STM32_QSPI_CCR_AUTO_POLL = 2, |
| 153 | STM32_QSPI_CCR_MEM_MAP = 3, |
| 154 | }; |
| 155 | |
| 156 | /* default SCK frequency, unit: HZ */ |
| 157 | #define STM32_QSPI_DEFAULT_SCK_FREQ 108000000 |
| 158 | |
| 159 | struct stm32_qspi_platdata { |
| 160 | u32 base; |
| 161 | u32 memory_map; |
| 162 | u32 max_hz; |
| 163 | }; |
| 164 | |
| 165 | struct stm32_qspi_priv { |
| 166 | struct stm32_qspi_regs *regs; |
| 167 | u32 max_hz; |
| 168 | u32 mode; |
| 169 | |
| 170 | u32 command; |
| 171 | u32 address; |
| 172 | u32 dummycycles; |
| 173 | #define CMD_HAS_ADR BIT(24) |
| 174 | #define CMD_HAS_DUMMY BIT(25) |
| 175 | #define CMD_HAS_DATA BIT(26) |
| 176 | }; |
| 177 | |
| 178 | static void _stm32_qspi_disable(struct stm32_qspi_priv *priv) |
| 179 | { |
| 180 | clrbits_le32(&priv->regs->cr, STM32_QSPI_CR_EN); |
| 181 | } |
| 182 | |
| 183 | static void _stm32_qspi_enable(struct stm32_qspi_priv *priv) |
| 184 | { |
| 185 | setbits_le32(&priv->regs->cr, STM32_QSPI_CR_EN); |
| 186 | } |
| 187 | |
| 188 | static void _stm32_qspi_wait_for_not_busy(struct stm32_qspi_priv *priv) |
| 189 | { |
| 190 | while (readl(&priv->regs->sr) & STM32_QSPI_SR_BUSY) |
| 191 | ; |
| 192 | } |
| 193 | |
| 194 | static void _stm32_qspi_wait_for_complete(struct stm32_qspi_priv *priv) |
| 195 | { |
| 196 | while (!(readl(&priv->regs->sr) & STM32_QSPI_SR_TCF)) |
| 197 | ; |
| 198 | } |
| 199 | |
| 200 | static void _stm32_qspi_wait_for_ftf(struct stm32_qspi_priv *priv) |
| 201 | { |
| 202 | while (!(readl(&priv->regs->sr) & STM32_QSPI_SR_FTF)) |
| 203 | ; |
| 204 | } |
| 205 | |
| 206 | static void _stm32_qspi_set_flash_size(struct stm32_qspi_priv *priv, u32 size) |
| 207 | { |
| 208 | u32 fsize = fls(size) - 1; |
| 209 | clrsetbits_le32(&priv->regs->dcr, |
| 210 | STM32_QSPI_DCR_FSIZE_MASK << STM32_QSPI_DCR_FSIZE_SHIFT, |
| 211 | fsize << STM32_QSPI_DCR_FSIZE_SHIFT); |
| 212 | } |
| 213 | |
| 214 | static unsigned int _stm32_qspi_gen_ccr(struct stm32_qspi_priv *priv) |
| 215 | { |
| 216 | unsigned int ccr_reg = 0; |
| 217 | u8 imode, admode, dmode; |
| 218 | u32 mode = priv->mode; |
| 219 | u32 cmd = (priv->command & STM32_QSPI_CCR_INSTRUCTION_MASK); |
| 220 | |
| 221 | imode = STM32_QSPI_CCR_IMODE_ONE_LINE; |
| 222 | admode = STM32_QSPI_CCR_ADMODE_ONE_LINE; |
| 223 | |
| 224 | if (mode & SPI_RX_QUAD) { |
| 225 | dmode = STM32_QSPI_CCR_DMODE_FOUR_LINE; |
| 226 | if (mode & SPI_TX_QUAD) { |
| 227 | imode = STM32_QSPI_CCR_IMODE_FOUR_LINE; |
| 228 | admode = STM32_QSPI_CCR_ADMODE_FOUR_LINE; |
| 229 | } |
| 230 | } else if (mode & SPI_RX_DUAL) { |
| 231 | dmode = STM32_QSPI_CCR_DMODE_TWO_LINE; |
| 232 | if (mode & SPI_TX_DUAL) { |
| 233 | imode = STM32_QSPI_CCR_IMODE_TWO_LINE; |
| 234 | admode = STM32_QSPI_CCR_ADMODE_TWO_LINE; |
| 235 | } |
| 236 | } else { |
| 237 | dmode = STM32_QSPI_CCR_DMODE_ONE_LINE; |
| 238 | } |
| 239 | |
| 240 | if (priv->command & CMD_HAS_DATA) |
| 241 | ccr_reg |= (dmode << STM32_QSPI_CCR_DMODE_SHIFT); |
| 242 | |
| 243 | if (priv->command & CMD_HAS_DUMMY) |
| 244 | ccr_reg |= ((priv->dummycycles & STM32_QSPI_CCR_DCYC_MASK) |
| 245 | << STM32_QSPI_CCR_DCYC_SHIFT); |
| 246 | |
| 247 | if (priv->command & CMD_HAS_ADR) { |
| 248 | ccr_reg |= (STM32_QSPI_CCR_ADSIZE_24BIT |
| 249 | << STM32_QSPI_CCR_ADSIZE_SHIFT); |
| 250 | ccr_reg |= (admode << STM32_QSPI_CCR_ADMODE_SHIFT); |
| 251 | } |
| 252 | ccr_reg |= (imode << STM32_QSPI_CCR_IMODE_SHIFT); |
| 253 | ccr_reg |= cmd; |
| 254 | return ccr_reg; |
| 255 | } |
| 256 | |
| 257 | static void _stm32_qspi_enable_mmap(struct stm32_qspi_priv *priv, |
| 258 | struct spi_flash *flash) |
| 259 | { |
| 260 | priv->command = flash->read_cmd | CMD_HAS_ADR | CMD_HAS_DATA |
| 261 | | CMD_HAS_DUMMY; |
| 262 | priv->dummycycles = flash->dummy_byte * 8; |
| 263 | |
| 264 | unsigned int ccr_reg = _stm32_qspi_gen_ccr(priv); |
| 265 | ccr_reg |= (STM32_QSPI_CCR_MEM_MAP << STM32_QSPI_CCR_FMODE_SHIFT); |
| 266 | |
| 267 | _stm32_qspi_wait_for_not_busy(priv); |
| 268 | |
| 269 | writel(ccr_reg, &priv->regs->ccr); |
| 270 | |
| 271 | priv->dummycycles = 0; |
| 272 | } |
| 273 | |
| 274 | static void _stm32_qspi_disable_mmap(struct stm32_qspi_priv *priv) |
| 275 | { |
| 276 | setbits_le32(&priv->regs->cr, STM32_QSPI_CR_ABORT); |
| 277 | } |
| 278 | |
| 279 | static void _stm32_qspi_set_xfer_length(struct stm32_qspi_priv *priv, |
| 280 | u32 length) |
| 281 | { |
| 282 | writel(length - 1, &priv->regs->dlr); |
| 283 | } |
| 284 | |
| 285 | static void _stm32_qspi_start_xfer(struct stm32_qspi_priv *priv, u32 cr_reg) |
| 286 | { |
| 287 | writel(cr_reg, &priv->regs->ccr); |
| 288 | |
| 289 | if (priv->command & CMD_HAS_ADR) |
| 290 | writel(priv->address, &priv->regs->ar); |
| 291 | } |
| 292 | |
| 293 | static int _stm32_qspi_xfer(struct stm32_qspi_priv *priv, |
| 294 | struct spi_flash *flash, unsigned int bitlen, |
| 295 | const u8 *dout, u8 *din, unsigned long flags) |
| 296 | { |
| 297 | unsigned int words = bitlen / 8; |
| 298 | |
| 299 | if (flags & SPI_XFER_MMAP) { |
| 300 | _stm32_qspi_enable_mmap(priv, flash); |
| 301 | return 0; |
| 302 | } else if (flags & SPI_XFER_MMAP_END) { |
| 303 | _stm32_qspi_disable_mmap(priv); |
| 304 | return 0; |
| 305 | } |
| 306 | |
| 307 | if (bitlen == 0) |
| 308 | return -1; |
| 309 | |
| 310 | if (bitlen % 8) { |
| 311 | debug("spi_xfer: Non byte aligned SPI transfer\n"); |
| 312 | return -1; |
| 313 | } |
| 314 | |
| 315 | if (dout && din) { |
| 316 | debug("spi_xfer: QSPI cannot have data in and data out set\n"); |
| 317 | return -1; |
| 318 | } |
| 319 | |
| 320 | if (!dout && (flags & SPI_XFER_BEGIN)) { |
| 321 | debug("spi_xfer: QSPI transfer must begin with command\n"); |
| 322 | return -1; |
| 323 | } |
| 324 | |
| 325 | if (dout) { |
| 326 | if (flags & SPI_XFER_BEGIN) { |
| 327 | /* data is command */ |
| 328 | priv->command = dout[0] | CMD_HAS_DATA; |
| 329 | if (words >= 4) { |
| 330 | /* address is here too */ |
| 331 | priv->address = (dout[1] << 16) | |
| 332 | (dout[2] << 8) | dout[3]; |
| 333 | priv->command |= CMD_HAS_ADR; |
| 334 | } |
| 335 | |
| 336 | if (words > 4) { |
| 337 | /* rest is dummy bytes */ |
| 338 | priv->dummycycles = (words - 4) * 8; |
| 339 | priv->command |= CMD_HAS_DUMMY; |
| 340 | } |
| 341 | |
| 342 | if (flags & SPI_XFER_END) { |
| 343 | /* command without data */ |
| 344 | priv->command &= ~(CMD_HAS_DATA); |
| 345 | } |
| 346 | } |
| 347 | |
| 348 | if (flags & SPI_XFER_END) { |
| 349 | u32 ccr_reg = _stm32_qspi_gen_ccr(priv); |
| 350 | ccr_reg |= STM32_QSPI_CCR_IND_WRITE |
| 351 | << STM32_QSPI_CCR_FMODE_SHIFT; |
| 352 | |
| 353 | _stm32_qspi_wait_for_not_busy(priv); |
| 354 | |
| 355 | if (priv->command & CMD_HAS_DATA) |
| 356 | _stm32_qspi_set_xfer_length(priv, words); |
| 357 | |
| 358 | _stm32_qspi_start_xfer(priv, ccr_reg); |
| 359 | |
| 360 | debug("%s: write: ccr:0x%08x adr:0x%08x\n", |
| 361 | __func__, priv->regs->ccr, priv->regs->ar); |
| 362 | |
| 363 | if (priv->command & CMD_HAS_DATA) { |
| 364 | _stm32_qspi_wait_for_ftf(priv); |
| 365 | |
| 366 | debug("%s: words:%d data:", __func__, words); |
| 367 | |
| 368 | int i = 0; |
| 369 | while (words > i) { |
| 370 | writeb(dout[i], &priv->regs->dr); |
| 371 | debug("%02x ", dout[i]); |
| 372 | i++; |
| 373 | } |
| 374 | debug("\n"); |
| 375 | |
| 376 | _stm32_qspi_wait_for_complete(priv); |
| 377 | } else { |
| 378 | _stm32_qspi_wait_for_not_busy(priv); |
| 379 | } |
| 380 | } |
| 381 | } else if (din) { |
| 382 | u32 ccr_reg = _stm32_qspi_gen_ccr(priv); |
| 383 | ccr_reg |= STM32_QSPI_CCR_IND_READ |
| 384 | << STM32_QSPI_CCR_FMODE_SHIFT; |
| 385 | |
| 386 | _stm32_qspi_wait_for_not_busy(priv); |
| 387 | |
| 388 | _stm32_qspi_set_xfer_length(priv, words); |
| 389 | |
| 390 | _stm32_qspi_start_xfer(priv, ccr_reg); |
| 391 | |
| 392 | debug("%s: read: ccr:0x%08x adr:0x%08x len:%d\n", __func__, |
| 393 | priv->regs->ccr, priv->regs->ar, priv->regs->dlr); |
| 394 | |
| 395 | debug("%s: data:", __func__); |
| 396 | |
| 397 | int i = 0; |
| 398 | while (words > i) { |
| 399 | din[i] = readb(&priv->regs->dr); |
| 400 | debug("%02x ", din[i]); |
| 401 | i++; |
| 402 | } |
| 403 | debug("\n"); |
| 404 | } |
| 405 | |
| 406 | return 0; |
| 407 | } |
| 408 | |
| 409 | static int stm32_qspi_ofdata_to_platdata(struct udevice *bus) |
| 410 | { |
| 411 | struct fdt_resource res_regs, res_mem; |
| 412 | struct stm32_qspi_platdata *plat = bus->platdata; |
| 413 | const void *blob = gd->fdt_blob; |
Simon Glass | dd79d6e | 2017-01-17 16:52:55 -0700 | [diff] [blame] | 414 | int node = dev_of_offset(bus); |
Michael Kurz | 337ff2a | 2017-01-22 16:04:30 +0100 | [diff] [blame] | 415 | int ret; |
| 416 | |
| 417 | ret = fdt_get_named_resource(blob, node, "reg", "reg-names", |
| 418 | "QuadSPI", &res_regs); |
| 419 | if (ret) { |
| 420 | debug("Error: can't get regs base addresses(ret = %d)!\n", ret); |
| 421 | return -ENOMEM; |
| 422 | } |
| 423 | ret = fdt_get_named_resource(blob, node, "reg", "reg-names", |
| 424 | "QuadSPI-memory", &res_mem); |
| 425 | if (ret) { |
| 426 | debug("Error: can't get mmap base address(ret = %d)!\n", ret); |
| 427 | return -ENOMEM; |
| 428 | } |
| 429 | |
| 430 | plat->max_hz = fdtdec_get_int(blob, node, "spi-max-frequency", |
| 431 | STM32_QSPI_DEFAULT_SCK_FREQ); |
| 432 | |
| 433 | plat->base = res_regs.start; |
| 434 | plat->memory_map = res_mem.start; |
| 435 | |
| 436 | debug("%s: regs=<0x%x> mapped=<0x%x>, max-frequency=%d\n", |
| 437 | __func__, |
| 438 | plat->base, |
| 439 | plat->memory_map, |
| 440 | plat->max_hz |
| 441 | ); |
| 442 | |
| 443 | return 0; |
| 444 | } |
| 445 | |
| 446 | static int stm32_qspi_probe(struct udevice *bus) |
| 447 | { |
| 448 | struct stm32_qspi_platdata *plat = dev_get_platdata(bus); |
| 449 | struct stm32_qspi_priv *priv = dev_get_priv(bus); |
| 450 | struct dm_spi_bus *dm_spi_bus; |
| 451 | |
| 452 | dm_spi_bus = bus->uclass_priv; |
| 453 | |
| 454 | dm_spi_bus->max_hz = plat->max_hz; |
| 455 | |
| 456 | priv->regs = (struct stm32_qspi_regs *)(uintptr_t)plat->base; |
| 457 | |
| 458 | priv->max_hz = plat->max_hz; |
| 459 | |
| 460 | clock_setup(QSPI_CLOCK_CFG); |
| 461 | |
| 462 | setbits_le32(&priv->regs->cr, STM32_QSPI_CR_SSHIFT); |
| 463 | |
| 464 | return 0; |
| 465 | } |
| 466 | |
| 467 | static int stm32_qspi_remove(struct udevice *bus) |
| 468 | { |
| 469 | return 0; |
| 470 | } |
| 471 | |
| 472 | static int stm32_qspi_claim_bus(struct udevice *dev) |
| 473 | { |
| 474 | struct stm32_qspi_priv *priv; |
| 475 | struct udevice *bus; |
| 476 | struct spi_flash *flash; |
| 477 | |
| 478 | bus = dev->parent; |
| 479 | priv = dev_get_priv(bus); |
| 480 | flash = dev_get_uclass_priv(dev); |
| 481 | |
| 482 | _stm32_qspi_set_flash_size(priv, flash->size); |
| 483 | |
| 484 | _stm32_qspi_enable(priv); |
| 485 | |
| 486 | return 0; |
| 487 | } |
| 488 | |
| 489 | static int stm32_qspi_release_bus(struct udevice *dev) |
| 490 | { |
| 491 | struct stm32_qspi_priv *priv; |
| 492 | struct udevice *bus; |
| 493 | |
| 494 | bus = dev->parent; |
| 495 | priv = dev_get_priv(bus); |
| 496 | |
| 497 | _stm32_qspi_disable(priv); |
| 498 | |
| 499 | return 0; |
| 500 | } |
| 501 | |
| 502 | static int stm32_qspi_xfer(struct udevice *dev, unsigned int bitlen, |
| 503 | const void *dout, void *din, unsigned long flags) |
| 504 | { |
| 505 | struct stm32_qspi_priv *priv; |
| 506 | struct udevice *bus; |
| 507 | struct spi_flash *flash; |
| 508 | |
| 509 | bus = dev->parent; |
| 510 | priv = dev_get_priv(bus); |
| 511 | flash = dev_get_uclass_priv(dev); |
| 512 | |
| 513 | return _stm32_qspi_xfer(priv, flash, bitlen, (const u8 *)dout, |
| 514 | (u8 *)din, flags); |
| 515 | } |
| 516 | |
| 517 | static int stm32_qspi_set_speed(struct udevice *bus, uint speed) |
| 518 | { |
| 519 | struct stm32_qspi_platdata *plat = bus->platdata; |
| 520 | struct stm32_qspi_priv *priv = dev_get_priv(bus); |
| 521 | |
| 522 | if (speed > plat->max_hz) |
| 523 | speed = plat->max_hz; |
| 524 | |
| 525 | u32 qspi_clk = clock_get(CLOCK_AHB); |
| 526 | u32 prescaler = 255; |
| 527 | if (speed > 0) { |
| 528 | prescaler = DIV_ROUND_UP(qspi_clk, speed) - 1; |
| 529 | if (prescaler > 255) |
| 530 | prescaler = 255; |
| 531 | else if (prescaler < 0) |
| 532 | prescaler = 0; |
| 533 | } |
| 534 | |
| 535 | u32 csht = DIV_ROUND_UP((5 * qspi_clk) / (prescaler + 1), 100000000); |
| 536 | csht = (csht - 1) & STM32_QSPI_DCR_CSHT_MASK; |
| 537 | |
| 538 | _stm32_qspi_wait_for_not_busy(priv); |
| 539 | |
| 540 | clrsetbits_le32(&priv->regs->cr, |
| 541 | STM32_QSPI_CR_PRESCALER_MASK << |
| 542 | STM32_QSPI_CR_PRESCALER_SHIFT, |
| 543 | prescaler << STM32_QSPI_CR_PRESCALER_SHIFT); |
| 544 | |
| 545 | |
| 546 | clrsetbits_le32(&priv->regs->dcr, |
| 547 | STM32_QSPI_DCR_CSHT_MASK << STM32_QSPI_DCR_CSHT_SHIFT, |
| 548 | csht << STM32_QSPI_DCR_CSHT_SHIFT); |
| 549 | |
| 550 | debug("%s: regs=%p, speed=%d\n", __func__, priv->regs, |
| 551 | (qspi_clk / (prescaler + 1))); |
| 552 | |
| 553 | return 0; |
| 554 | } |
| 555 | |
| 556 | static int stm32_qspi_set_mode(struct udevice *bus, uint mode) |
| 557 | { |
| 558 | struct stm32_qspi_priv *priv = dev_get_priv(bus); |
| 559 | |
| 560 | _stm32_qspi_wait_for_not_busy(priv); |
| 561 | |
| 562 | if ((mode & SPI_CPHA) && (mode & SPI_CPOL)) |
| 563 | setbits_le32(&priv->regs->dcr, STM32_QSPI_DCR_CKMODE); |
| 564 | else if (!(mode & SPI_CPHA) && !(mode & SPI_CPOL)) |
| 565 | clrbits_le32(&priv->regs->dcr, STM32_QSPI_DCR_CKMODE); |
| 566 | else |
| 567 | return -ENODEV; |
| 568 | |
| 569 | if (mode & SPI_CS_HIGH) |
| 570 | return -ENODEV; |
| 571 | |
| 572 | if (mode & SPI_RX_QUAD) |
| 573 | priv->mode |= SPI_RX_QUAD; |
| 574 | else if (mode & SPI_RX_DUAL) |
| 575 | priv->mode |= SPI_RX_DUAL; |
| 576 | else |
| 577 | priv->mode &= ~(SPI_RX_QUAD | SPI_RX_DUAL); |
| 578 | |
| 579 | if (mode & SPI_TX_QUAD) |
| 580 | priv->mode |= SPI_TX_QUAD; |
| 581 | else if (mode & SPI_TX_DUAL) |
| 582 | priv->mode |= SPI_TX_DUAL; |
| 583 | else |
| 584 | priv->mode &= ~(SPI_TX_QUAD | SPI_TX_DUAL); |
| 585 | |
| 586 | debug("%s: regs=%p, mode=%d rx: ", __func__, priv->regs, mode); |
| 587 | |
| 588 | if (mode & SPI_RX_QUAD) |
| 589 | debug("quad, tx: "); |
| 590 | else if (mode & SPI_RX_DUAL) |
| 591 | debug("dual, tx: "); |
| 592 | else |
| 593 | debug("single, tx: "); |
| 594 | |
| 595 | if (mode & SPI_TX_QUAD) |
| 596 | debug("quad\n"); |
| 597 | else if (mode & SPI_TX_DUAL) |
| 598 | debug("dual\n"); |
| 599 | else |
| 600 | debug("single\n"); |
| 601 | |
| 602 | return 0; |
| 603 | } |
| 604 | |
| 605 | static const struct dm_spi_ops stm32_qspi_ops = { |
| 606 | .claim_bus = stm32_qspi_claim_bus, |
| 607 | .release_bus = stm32_qspi_release_bus, |
| 608 | .xfer = stm32_qspi_xfer, |
| 609 | .set_speed = stm32_qspi_set_speed, |
| 610 | .set_mode = stm32_qspi_set_mode, |
| 611 | }; |
| 612 | |
| 613 | static const struct udevice_id stm32_qspi_ids[] = { |
| 614 | { .compatible = "st,stm32-qspi" }, |
| 615 | { } |
| 616 | }; |
| 617 | |
| 618 | U_BOOT_DRIVER(stm32_qspi) = { |
| 619 | .name = "stm32_qspi", |
| 620 | .id = UCLASS_SPI, |
| 621 | .of_match = stm32_qspi_ids, |
| 622 | .ops = &stm32_qspi_ops, |
| 623 | .ofdata_to_platdata = stm32_qspi_ofdata_to_platdata, |
| 624 | .platdata_auto_alloc_size = sizeof(struct stm32_qspi_platdata), |
| 625 | .priv_auto_alloc_size = sizeof(struct stm32_qspi_priv), |
| 626 | .probe = stm32_qspi_probe, |
| 627 | .remove = stm32_qspi_remove, |
| 628 | }; |