blob: 3fdd0a72f87f795b43d049a262ae5e3d7df2b967 [file] [log] [blame]
Adam Ford8de5f822019-07-15 14:07:52 -05001// SPDX-License-Identifier: GPL-2.0-only
Adam Ford5e1c3582017-04-17 08:09:44 -05002
3#include <dt-bindings/input/input.h>
4
5/ {
Adam Forda2ab7eb2018-07-09 20:18:14 -05006 chosen {
7 stdout-path = &uart1;
8 };
9
Adam Ford5e1c3582017-04-17 08:09:44 -050010 cpus {
11 cpu@0 {
12 cpu0-supply = <&vcc>;
13 };
14 };
15
16 memory@80000000 {
17 device_type = "memory";
18 reg = <0x80000000 0>;
19 };
20
21 leds {
22 compatible = "gpio-leds";
23 user0 {
24 label = "user0";
25 gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>; /* LEDA */
26 linux,default-trigger = "none";
27 };
28 };
29
Adam Forda2ab7eb2018-07-09 20:18:14 -050030 /* fixed 26MHz oscillator */
31 hfclk_26m: oscillator {
32 #clock-cells = <0>;
33 compatible = "fixed-clock";
34 clock-frequency = <26000000>;
Adam Ford5e1c3582017-04-17 08:09:44 -050035 };
36};
37
38&gpmc {
39 ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */
40
41 nand@0,0 {
42 compatible = "ti,omap2-nand";
43 reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
44 interrupt-parent = <&gpmc>;
45 interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
46 <1 IRQ_TYPE_NONE>; /* termcount */
47 linux,mtd-name = "micron,mt29f4g16abbda3w";
48 nand-bus-width = <16>;
49 ti,nand-ecc-opt = "bch8";
50 rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
51 gpmc,sync-clk-ps = <0>;
52 gpmc,cs-on-ns = <0>;
53 gpmc,cs-rd-off-ns = <44>;
54 gpmc,cs-wr-off-ns = <44>;
55 gpmc,adv-on-ns = <6>;
56 gpmc,adv-rd-off-ns = <34>;
57 gpmc,adv-wr-off-ns = <44>;
58 gpmc,we-off-ns = <40>;
59 gpmc,oe-off-ns = <54>;
60 gpmc,access-ns = <64>;
61 gpmc,rd-cycle-ns = <82>;
62 gpmc,wr-cycle-ns = <82>;
63 gpmc,wr-access-ns = <40>;
64 gpmc,wr-data-mux-bus-ns = <0>;
65 gpmc,device-width = <2>;
66 #address-cells = <1>;
67 #size-cells = <1>;
68 };
69};
70
71&i2c1 {
Adam Forda2ab7eb2018-07-09 20:18:14 -050072 pinctrl-names = "default";
73 pinctrl-0 = <&i2c1_pins>;
74 clock-frequency = <2600000>;
Adam Ford5e1c3582017-04-17 08:09:44 -050075
76 twl: twl@48 {
77 reg = <0x48>;
78 interrupts = <7>; /* SYS_NIRQ cascaded to intc */
79 interrupt-parent = <&intc>;
Adam Forda2ab7eb2018-07-09 20:18:14 -050080 clocks = <&hfclk_26m>;
81 clock-names = "fck";
82
Adam Ford5e1c3582017-04-17 08:09:44 -050083 twl_audio: audio {
84 compatible = "ti,twl4030-audio";
85 codec {
86 };
87 };
88 };
89};
90
91&i2c2 {
Adam Forda2ab7eb2018-07-09 20:18:14 -050092 pinctrl-names = "default";
93 pinctrl-0 = <&i2c2_pins>;
Adam Ford5e1c3582017-04-17 08:09:44 -050094 clock-frequency = <400000>;
95};
96
97&i2c3 {
Adam Forda2ab7eb2018-07-09 20:18:14 -050098 pinctrl-names = "default";
99 pinctrl-0 = <&i2c3_pins>;
Adam Ford5e1c3582017-04-17 08:09:44 -0500100 clock-frequency = <400000>;
101 at24@50 {
Adam Forda2ab7eb2018-07-09 20:18:14 -0500102 compatible = "atmel,24c64";
Adam Ford5e1c3582017-04-17 08:09:44 -0500103 readonly;
104 reg = <0x50>;
105 };
106};
107
Adam Ford5e1c3582017-04-17 08:09:44 -0500108&omap3_pmx_core {
Adam Ford5e1c3582017-04-17 08:09:44 -0500109 mcbsp2_pins: pinmux_mcbsp2_pins {
110 pinctrl-single,pins = <
111 OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx */
112 OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0) /* mcbsp2_clkx */
113 OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0) /* mcbsp2_dr */
114 OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0) /* mcbsp2_dx */
115 >;
116 };
117 uart2_pins: pinmux_uart2_pins {
118 pinctrl-single,pins = <
119 OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT | MUX_MODE0) /* uart2_cts.uart2_cts */
120 OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts .uart2_rts*/
121 OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */
122 OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */
123 OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4) /* GPIO_162,BT_EN */
124 >;
125 };
126 mcspi1_pins: pinmux_mcspi1_pins {
127 pinctrl-single,pins = <
128 OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */
129 OMAP3_CORE1_IOPAD(0x21ca, PIN_OUTPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */
130 OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT_PULLUP | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */
131 OMAP3_CORE1_IOPAD(0x21ce, PIN_OUTPUT | MUX_MODE0) /* mcspi1_cs0.mcspi1_cs0 */
132 >;
133 };
134 hsusb_otg_pins: pinmux_hsusb_otg_pins {
135 pinctrl-single,pins = <
136 OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0) /* hsusb0_clk.hsusb0_clk */
137 OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0) /* hsusb0_stp.hsusb0_stp */
138 OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT | MUX_MODE0) /* hsusb0_dir.hsusb0_dir */
139 OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT | MUX_MODE0) /* hsusb0_nxt.hsusb0_nxt */
140
141 OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT | MUX_MODE0) /* hsusb0_data0.hsusb0_data0 */
142 OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT | MUX_MODE0) /* hsusb0_data1.hsusb0_data1 */
143 OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT | MUX_MODE0) /* hsusb0_data2.hsusb0_data2 */
144 OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT | MUX_MODE0) /* hsusb0_data3.hsusb0_data3 */
145 OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT | MUX_MODE0) /* hsusb0_data4.hsusb0_data4 */
146 OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT | MUX_MODE0) /* hsusb0_data5.hsusb0_data5 */
147 OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT | MUX_MODE0) /* hsusb0_data6.hsusb0_data6 */
148 OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0) /* hsusb0_data7.hsusb0_data7 */
149 >;
150 };
Adam Forda2ab7eb2018-07-09 20:18:14 -0500151 i2c1_pins: pinmux_i2c1_pins {
152 pinctrl-single,pins = <
153 OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */
154 OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */
155 >;
156 };
157 i2c2_pins: pinmux_i2c2_pins {
158 pinctrl-single,pins = <
159 OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0) /* i2c2_scl */
160 OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0) /* i2c2_sda */
161 >;
162 };
163 i2c3_pins: pinmux_i2c3_pins {
164 pinctrl-single,pins = <
165 OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0) /* i2c3_scl */
166 OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda */
167 >;
168 };
Adam Ford5e1c3582017-04-17 08:09:44 -0500169};
170
171&uart2 {
172 interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>;
173 pinctrl-names = "default";
174 pinctrl-0 = <&uart2_pins>;
175};
176
177&mcspi1 {
178 pinctrl-names = "default";
179 pinctrl-0 = <&mcspi1_pins>;
180};
181
Adam Ford5e1c3582017-04-17 08:09:44 -0500182#include "twl4030.dtsi"
183#include "twl4030_omap3.dtsi"
184
185&twl {
186 twl_power: power {
187 compatible = "ti,twl4030-power-idle-osc-off", "ti,twl4030-power-idle";
188 ti,use_poweroff;
189 };
190};
191
192&twl_gpio {
193 ti,use-leds;
194};