blob: 0ed6beca387acc71b16d94b0f01f06b5908edb76 [file] [log] [blame]
Tom Rini10e47792018-05-06 17:58:06 -04001/* SPDX-License-Identifier: GPL-2.0+ */
Kyle Moffett3761b972011-10-19 14:58:15 -04002/*
3 * Copyright 2010 eXMeritus, A Boeing Company
Kyle Moffett3761b972011-10-19 14:58:15 -04004 */
5
6#ifndef POWERPC_ASM_MPC85XX_GPIO_H_
7#define POWERPC_ASM_MPC85XX_GPIO_H_
8
Madalin Bucur798ac8a2020-04-29 08:33:33 +03009#ifndef CONFIG_DM_GPIO
Kyle Moffett3761b972011-10-19 14:58:15 -040010# include <asm/immap_85xx.h>
11
12/*
13 * The following internal functions are an MPC85XX-specific GPIO API which
14 * allows setting and querying multiple GPIOs in a single operation.
15 *
16 * All of these look relatively large, but the arguments are almost always
17 * constants, so they compile down to just a few instructions and a
18 * memory-mapped IO operation or two.
19 */
20static inline void mpc85xx_gpio_set(unsigned int mask,
21 unsigned int dir, unsigned int val)
22{
Tom Rinid5c3bf22022-10-28 20:27:12 -040023 ccsr_gpio_t *gpio = (void *)(CFG_SYS_MPC85xx_GPIO_ADDR);
Kyle Moffett3761b972011-10-19 14:58:15 -040024
25 /* First mask off the unwanted parts of "dir" and "val" */
26 dir &= mask;
27 val &= mask;
28
29 /* Now read in the values we're supposed to preserve */
30 dir |= (in_be32(&gpio->gpdir) & ~mask);
31 val |= (in_be32(&gpio->gpdat) & ~mask);
32
33 /*
34 * Poke the new output values first, then set the direction. This
35 * helps to avoid transient data when switching from input to output
36 * and vice versa.
37 */
38 out_be32(&gpio->gpdat, val);
39 out_be32(&gpio->gpdir, dir);
40}
41
42static inline void mpc85xx_gpio_set_in(unsigned int gpios)
43{
44 mpc85xx_gpio_set(gpios, 0x00000000, 0x00000000);
45}
46
47static inline void mpc85xx_gpio_set_low(unsigned int gpios)
48{
49 mpc85xx_gpio_set(gpios, 0xFFFFFFFF, 0x00000000);
50}
51
52static inline void mpc85xx_gpio_set_high(unsigned int gpios)
53{
54 mpc85xx_gpio_set(gpios, 0xFFFFFFFF, 0xFFFFFFFF);
55}
56
57static inline unsigned int mpc85xx_gpio_get(unsigned int mask)
58{
Tom Rinid5c3bf22022-10-28 20:27:12 -040059 ccsr_gpio_t *gpio = (void *)(CFG_SYS_MPC85xx_GPIO_ADDR);
Kyle Moffett3761b972011-10-19 14:58:15 -040060
61 /* Read the requested values */
62 return in_be32(&gpio->gpdat) & mask;
63}
64
65/*
66 * These implement the generic Linux GPIO API on top of the other functions
67 * in this header.
68 */
69static inline int gpio_request(unsigned gpio, const char *label)
70{
71 /* Compatibility shim */
72 return 0;
73}
74
Oleksandr G Zhadan2d24af12015-04-28 13:59:50 -040075static inline int gpio_free(unsigned gpio)
Kyle Moffett3761b972011-10-19 14:58:15 -040076{
77 /* Compatibility shim */
Oleksandr G Zhadan2d24af12015-04-28 13:59:50 -040078 return 0;
Kyle Moffett3761b972011-10-19 14:58:15 -040079}
80
81static inline int gpio_direction_input(unsigned gpio)
82{
83 mpc85xx_gpio_set_in(1U << gpio);
84 return 0;
85}
86
87static inline int gpio_direction_output(unsigned gpio, int value)
88{
Chris Packham09f4c2c2012-09-06 17:28:35 +000089 if (value)
90 mpc85xx_gpio_set_high(1U << gpio);
91 else
92 mpc85xx_gpio_set_low(1U << gpio);
Kyle Moffett3761b972011-10-19 14:58:15 -040093 return 0;
94}
95
96static inline int gpio_get_value(unsigned gpio)
97{
98 return !!mpc85xx_gpio_get(1U << gpio);
99}
100
Oleksandr G Zhadan2d24af12015-04-28 13:59:50 -0400101static inline int gpio_set_value(unsigned gpio, int value)
Kyle Moffett3761b972011-10-19 14:58:15 -0400102{
103 if (value)
104 mpc85xx_gpio_set_high(1U << gpio);
105 else
106 mpc85xx_gpio_set_low(1U << gpio);
Oleksandr G Zhadan2d24af12015-04-28 13:59:50 -0400107 return 0;
Kyle Moffett3761b972011-10-19 14:58:15 -0400108}
109
110static inline int gpio_is_valid(int gpio)
111{
112 return (gpio >= 0) && (gpio < 32);
113}
Madalin Bucur798ac8a2020-04-29 08:33:33 +0300114#endif /* not CONFIG_DM_GPIO */
Kyle Moffett3761b972011-10-19 14:58:15 -0400115#endif /* not POWERPC_ASM_MPC85XX_GPIO_H_ */