Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / 3b829a2c0bac0f9767988942751eaac8e3ade5e0 / . / dts / upstream / src / arm64 / rockchip / rk3566-powkiddy-rk2023.dtsi
blob: 0fa8f06f94cd90d638581710f67901e42a654bef [file] [log] [blame]
Tom Rini93743d22024-04-01 09:08:13 -0400[diff] [blame]1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2
3/dts-v1/;
4
5#include <dt-bindings/gpio/gpio.h>
6#include <dt-bindings/input/linux-event-codes.h>
7#include <dt-bindings/leds/common.h>
8#include <dt-bindings/pinctrl/rockchip.h>
9#include <dt-bindings/soc/rockchip,vop2.h>
10#include "rk3566.dtsi"
11
12/ {
13 aliases {
14 mmc1 = &sdmmc0;
15 mmc2 = &sdmmc1;
16 mmc3 = &sdmmc2;
17 };
18
19 adc-joystick {
20 compatible = "adc-joystick";
21 io-channels = <&adc_mux 0>,
22 <&adc_mux 1>,
23 <&adc_mux 2>,
24 <&adc_mux 3>;
25 pinctrl-0 = <&joy_mux_en>;
26 pinctrl-names = "default";
27 poll-interval = <60>;
28 #address-cells = <1>;
29 #size-cells = <0>;
30
31 axis@0 {
32 reg = <0>;
33 abs-flat = <32>;
34 abs-fuzz = <32>;
35 abs-range = <1023 15>;
36 linux,code = <ABS_X>;
37 };
38
39 axis@1 {
40 reg = <1>;
41 abs-flat = <32>;
42 abs-fuzz = <32>;
43 abs-range = <15 1023>;
44 linux,code = <ABS_RX>;
45 };
46
47 axis@2 {
48 reg = <2>;
49 abs-flat = <32>;
50 abs-fuzz = <32>;
51 abs-range = <15 1023>;
52 linux,code = <ABS_Y>;
53 };
54
55 axis@3 {
56 reg = <3>;
57 abs-flat = <32>;
58 abs-fuzz = <32>;
59 abs-range = <1023 15>;
60 linux,code = <ABS_RY>;
61 };
62 };
63
64 adc_mux: adc-mux {
65 compatible = "io-channel-mux";
66 channels = "left_x", "right_x", "left_y", "right_y";
67 #io-channel-cells = <1>;
68 io-channels = <&saradc 3>;
69 io-channel-names = "parent";
70 mux-controls = <&gpio_mux>;
71 settle-time-us = <100>;
72 };
73
74 backlight: backlight {
75 compatible = "pwm-backlight";
76 power-supply = <&vcc_sys>;
77 pwms = <&pwm4 0 25000 0>;
78 };
79
80 battery: battery {
81 compatible = "simple-battery";
82 charge-full-design-microamp-hours = <3151000>;
83 charge-term-current-microamp = <300000>;
84 constant-charge-current-max-microamp = <2000000>;
85 constant-charge-voltage-max-microvolt = <4250000>;
86 factory-internal-resistance-micro-ohms = <117000>;
87 voltage-max-design-microvolt = <4172000>;
88 voltage-min-design-microvolt = <3400000>;
89
90 ocv-capacity-celsius = <20>;
91 ocv-capacity-table-0 = <4172000 100>, <4092000 95>, <4035000 90>, <3990000 85>,
92 <3939000 80>, <3895000 75>, <3852000 70>, <3807000 65>,
93 <3762000 60>, <3713000 55>, <3672000 50>, <3647000 45>,
94 <3629000 40>, <3613000 35>, <3598000 30>, <3578000 25>,
95 <3550000 20>, <3519000 15>, <3479000 10>, <3438000 5>,
96 <3400000 0>;
97 };
98
99 gpio_keys_control: gpio-keys-control {
100 compatible = "gpio-keys";
101 pinctrl-0 = <&btn_pins_ctrl>;
102 pinctrl-names = "default";
103
104 button-a {
105 gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>;
106 label = "EAST";
107 linux,code = <BTN_EAST>;
108 };
109
110 button-b {
111 gpios = <&gpio3 RK_PC3 GPIO_ACTIVE_LOW>;
112 label = "SOUTH";
113 linux,code = <BTN_SOUTH>;
114 };
115
116 button-down {
117 gpios = <&gpio3 RK_PA4 GPIO_ACTIVE_LOW>;
118 label = "DPAD-DOWN";
119 linux,code = <BTN_DPAD_DOWN>;
120 };
121
122 button-l1 {
123 gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>;
124 label = "TL";
125 linux,code = <BTN_TL>;
126 };
127
128 button-l2 {
129 gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>;
130 label = "TL2";
131 linux,code = <BTN_TL2>;
132 };
133
134 button-left {
135 gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>;
136 label = "DPAD-LEFT";
137 linux,code = <BTN_DPAD_LEFT>;
138 };
139
140 button-r1 {
141 gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;
142 label = "TR";
143 linux,code = <BTN_TR>;
144 };
145
146 button-r2 {
147 gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
148 label = "TR2";
149 linux,code = <BTN_TR2>;
150 };
151
152 button-right {
153 gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_LOW>;
154 label = "DPAD-RIGHT";
155 linux,code = <BTN_DPAD_RIGHT>;
156 };
157
158 button-select {
159 gpios = <&gpio3 RK_PB6 GPIO_ACTIVE_LOW>;
160 label = "SELECT";
161 linux,code = <BTN_SELECT>;
162 };
163
164 button-start {
165 gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_LOW>;
166 label = "START";
167 linux,code = <BTN_START>;
168 };
169
170 button-thumbl {
171 gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>;
172 label = "THUMBL";
173 linux,code = <BTN_THUMBL>;
174 };
175
176 button-thumbr {
177 gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_LOW>;
178 label = "THUMBR";
179 linux,code = <BTN_THUMBR>;
180 };
181
182 button-up {
183 gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_LOW>;
184 label = "DPAD-UP";
185 linux,code = <BTN_DPAD_UP>;
186 };
187
188 button-x {
189 gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
190 label = "NORTH";
191 linux,code = <BTN_NORTH>;
192 };
193
194 button-y {
195 gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_LOW>;
196 label = "WEST";
197 linux,code = <BTN_WEST>;
198 };
199 };
200
201 gpio_keys_vol: gpio-keys-vol {
202 compatible = "gpio-keys";
203 autorepeat;
204 pinctrl-0 = <&btn_pins_vol>;
205 pinctrl-names = "default";
206
207 button-vol-down {
208 gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
209 label = "VOLUMEDOWN";
210 linux,code = <KEY_VOLUMEDOWN>;
211 };
212
213 button-vol-up {
214 gpios = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>;
215 label = "VOLUMEUP";
216 linux,code = <KEY_VOLUMEUP>;
217 };
218 };
219
220 gpio_mux: mux-controller {
221 compatible = "gpio-mux";
222 mux-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>,
223 <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>;
224 #mux-control-cells = <0>;
225 };
226
227 hdmi-con {
228 compatible = "hdmi-connector";
229 ddc-i2c-bus = <&i2c5>;
230 type = "c";
231
232 port {
233 hdmi_con_in: endpoint {
234 remote-endpoint = <&hdmi_out_con>;
235 };
236 };
237 };
238
239 /*
240 * Device also includes an always on LED that is wired to the 5V input
241 * voltage and is on when the device is plugged in.
242 */
243 leds: pwm-leds {
244 compatible = "pwm-leds";
245
246 green_led: led-0 {
247 color = <LED_COLOR_ID_GREEN>;
248 function = LED_FUNCTION_STATUS;
249 max-brightness = <255>;
250 pwms = <&pwm6 0 25000 0>;
251 };
252
253 red_led: led-1 {
254 color = <LED_COLOR_ID_RED>;
255 function = LED_FUNCTION_CHARGING;
256 max-brightness = <255>;
257 pwms = <&pwm7 0 25000 0>;
258 };
259 };
260
261 sdio_pwrseq: sdio-pwrseq {
262 compatible = "mmc-pwrseq-simple";
263 clocks = <&rk817 1>;
264 clock-names = "ext_clock";
265 pinctrl-0 = <&wifi_enable_h>;
266 pinctrl-names = "default";
267 post-power-on-delay-ms = <200>;
268 reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_LOW>;
269 };
270
271 /*
272 * Channels reversed for speakers. Headphones automatically switch via hardware when
273 * detected with no ability to control output in software. Headphones appear to be mono
274 * (each output channel receives all audio). No microphone support on 3.5mm jack.
275 */
276 sound {
277 compatible = "simple-audio-card";
278 simple-audio-card,name = "rk817_ext";
279 simple-audio-card,format = "i2s";
280 simple-audio-card,mclk-fs = <256>;
281 simple-audio-card,widgets =
282 "Headphone", "Headphones";
283 simple-audio-card,routing =
284 "Headphones", "HPOL",
285 "Headphones", "HPOR";
286
287 simple-audio-card,codec {
288 sound-dai = <&rk817>;
289 };
290
291 simple-audio-card,cpu {
292 sound-dai = <&i2s1_8ch>;
293 };
294 };
295
296 vcc3v3_lcd0_n: regulator-vcc3v3-lcd0 {
297 compatible = "regulator-fixed";
298 gpio = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;
299 enable-active-high;
300 pinctrl-0 = <&vcc_lcd_h>;
301 pinctrl-names = "default";
302 regulator-boot-on;
303 regulator-min-microvolt = <3300000>;
304 regulator-max-microvolt = <3300000>;
305 regulator-name = "vcc3v3_lcd0_n";
306 vin-supply = <&vcc_3v3>;
307 regulator-state-mem {
308 regulator-off-in-suspend;
309 };
310 };
311
312 vcc_sys: regulator-vcc-sys {
313 compatible = "regulator-fixed";
314 regulator-always-on;
315 regulator-boot-on;
316 regulator-min-microvolt = <3800000>;
317 regulator-max-microvolt = <3800000>;
318 regulator-name = "vcc_sys";
319 };
320
321 vcc_wifi: regulator-vcc-wifi {
322 compatible = "regulator-fixed";
323 enable-active-high;
324 gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
325 pinctrl-0 = <&vcc_wifi_h>;
326 pinctrl-names = "default";
327 regulator-always-on;
328 regulator-boot-on;
329 regulator-min-microvolt = <3300000>;
330 regulator-max-microvolt = <3300000>;
331 regulator-name = "vcc_wifi";
332 };
333};
334
335&combphy1 {
336 status = "okay";
337};
338
339&cpu0 {
340 cpu-supply = <&vdd_cpu>;
341};
342
343&cpu1 {
344 cpu-supply = <&vdd_cpu>;
345};
346
347&cpu2 {
348 cpu-supply = <&vdd_cpu>;
349};
350
351&cpu3 {
352 cpu-supply = <&vdd_cpu>;
353};
354
355&dsi0 {
356 status = "okay";
357 #address-cells = <1>;
358 #size-cells = <0>;
359
360 ports {
361 dsi0_in: port@0 {
362 reg = <0>;
363 dsi0_in_vp1: endpoint {
364 remote-endpoint = <&vp1_out_dsi0>;
365 };
366 };
367
368 dsi0_out: port@1 {
369 reg = <1>;
370 mipi_out_panel: endpoint {
371 remote-endpoint = <&mipi_in_panel>;
372 };
373 };
374 };
375};
376
377&dsi_dphy0 {
378 status = "okay";
379};
380
381&gpu {
382 mali-supply = <&vdd_gpu>;
383 status = "okay";
384};
385
386&hdmi {
387 ddc-i2c-bus = <&i2c5>;
388 pinctrl-0 = <&hdmitxm0_cec>;
389 pinctrl-names = "default";
390 status = "okay";
391};
392
393&hdmi_in {
394 hdmi_in_vp0: endpoint {
395 remote-endpoint = <&vp0_out_hdmi>;
396 };
397};
398
399&hdmi_out {
400 hdmi_out_con: endpoint {
401 remote-endpoint = <&hdmi_con_in>;
402 };
403};
404
405&hdmi_sound {
406 status = "okay";
407};
408
409&i2c0 {
410 status = "okay";
411
412 rk817: pmic@20 {
413 compatible = "rockchip,rk817";
414 reg = <0x20>;
415 interrupt-parent = <&gpio0>;
416 interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
417 clock-output-names = "rk808-clkout1", "rk808-clkout2";
418 clock-names = "mclk";
419 clocks = <&cru I2S1_MCLKOUT_TX>;
420 assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
421 assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
422 #clock-cells = <1>;
423 #sound-dai-cells = <0>;
424 pinctrl-names = "default";
425 pinctrl-0 = <&i2s1m0_mclk>, <&pmic_int_l>;
426 wakeup-source;
427
428 vcc1-supply = <&vcc_sys>;
429 vcc2-supply = <&vcc_sys>;
430 vcc3-supply = <&vcc_sys>;
431 vcc4-supply = <&vcc_sys>;
432 vcc5-supply = <&vcc_sys>;
433 vcc6-supply = <&vcc_sys>;
434 vcc7-supply = <&vcc_sys>;
435 vcc8-supply = <&vcc_sys>;
436 vcc9-supply = <&dcdc_boost>;
437
438 regulators {
439 vdd_logic: DCDC_REG1 {
440 regulator-always-on;
441 regulator-boot-on;
442 regulator-min-microvolt = <500000>;
443 regulator-max-microvolt = <1350000>;
444 regulator-ramp-delay = <6001>;
445 regulator-initial-mode = <0x2>;
446 regulator-name = "vdd_logic";
447 regulator-state-mem {
448 regulator-off-in-suspend;
449 regulator-suspend-microvolt = <900000>;
450 };
451 };
452
453 vdd_gpu: DCDC_REG2 {
454 regulator-always-on;
455 regulator-boot-on;
456 regulator-min-microvolt = <500000>;
457 regulator-max-microvolt = <1350000>;
458 regulator-ramp-delay = <6001>;
459 regulator-initial-mode = <0x2>;
460 regulator-name = "vdd_gpu";
461 regulator-state-mem {
462 regulator-off-in-suspend;
463 };
464 };
465
466 vcc_ddr: DCDC_REG3 {
467 regulator-always-on;
468 regulator-boot-on;
469 regulator-initial-mode = <0x2>;
470 regulator-name = "vcc_ddr";
471 regulator-state-mem {
472 regulator-on-in-suspend;
473 };
474 };
475
476 vcc_3v3: DCDC_REG4 {
477 regulator-always-on;
478 regulator-boot-on;
479 regulator-min-microvolt = <3300000>;
480 regulator-max-microvolt = <3300000>;
481 regulator-initial-mode = <0x2>;
482 regulator-name = "vcc_3v3";
483 regulator-state-mem {
484 regulator-on-in-suspend;
485 regulator-suspend-microvolt = <3300000>;
486 };
487 };
488
489 vcca1v8_pmu: LDO_REG1 {
490 regulator-always-on;
491 regulator-boot-on;
492 regulator-min-microvolt = <1800000>;
493 regulator-max-microvolt = <1800000>;
494 regulator-name = "vcca1v8_pmu";
495 regulator-state-mem {
496 regulator-on-in-suspend;
497 regulator-suspend-microvolt = <1800000>;
498 };
499 };
500
501 vdda_0v9: LDO_REG2 {
502 regulator-always-on;
503 regulator-boot-on;
504 regulator-min-microvolt = <900000>;
505 regulator-max-microvolt = <900000>;
506 regulator-name = "vdda_0v9";
507 regulator-state-mem {
508 regulator-off-in-suspend;
509 };
510 };
511
512 vdda0v9_pmu: LDO_REG3 {
513 regulator-always-on;
514 regulator-boot-on;
515 regulator-min-microvolt = <900000>;
516 regulator-max-microvolt = <900000>;
517 regulator-name = "vdda0v9_pmu";
518 regulator-state-mem {
519 regulator-on-in-suspend;
520 regulator-suspend-microvolt = <900000>;
521 };
522 };
523
524 vccio_acodec: LDO_REG4 {
525 regulator-always-on;
526 regulator-boot-on;
527 regulator-min-microvolt = <3300000>;
528 regulator-max-microvolt = <3300000>;
529 regulator-name = "vccio_acodec";
530 regulator-state-mem {
531 regulator-off-in-suspend;
532 };
533 };
534
535 vccio_sd: LDO_REG5 {
536 regulator-always-on;
537 regulator-boot-on;
538 regulator-min-microvolt = <1800000>;
539 regulator-max-microvolt = <3300000>;
540 regulator-name = "vccio_sd";
541 regulator-state-mem {
542 regulator-off-in-suspend;
543 };
544 };
545
546 vcc3v3_pmu: LDO_REG6 {
547 regulator-always-on;
548 regulator-boot-on;
549 regulator-min-microvolt = <3300000>;
550 regulator-max-microvolt = <3300000>;
551 regulator-name = "vcc3v3_pmu";
552 regulator-state-mem {
553 regulator-on-in-suspend;
554 regulator-suspend-microvolt = <3300000>;
555 };
556 };
557
558 vcc_1v8: LDO_REG7 {
559 regulator-always-on;
560 regulator-boot-on;
561 regulator-min-microvolt = <1800000>;
562 regulator-max-microvolt = <1800000>;
563 regulator-name = "vcc_1v8";
564 regulator-state-mem {
565 regulator-off-in-suspend;
566 };
567 };
568
569 vcc1v8_dvp: LDO_REG8 {
570 regulator-always-on;
571 regulator-boot-on;
572 regulator-min-microvolt = <1800000>;
573 regulator-max-microvolt = <3300000>;
574 regulator-name = "vcc1v8_dvp";
575 regulator-state-mem {
576 regulator-off-in-suspend;
577 };
578 };
579
580 vcc2v8_dvp: LDO_REG9 {
581 regulator-always-on;
582 regulator-boot-on;
583 regulator-min-microvolt = <2800000>;
584 regulator-max-microvolt = <2800000>;
585 regulator-name = "vcc2v8_dvp";
586 regulator-state-mem {
587 regulator-off-in-suspend;
588 };
589 };
590
591 dcdc_boost: BOOST {
592 regulator-always-on;
593 regulator-boot-on;
594 regulator-min-microvolt = <4700000>;
595 regulator-max-microvolt = <5400000>;
596 regulator-name = "boost";
597 regulator-state-mem {
598 regulator-off-in-suspend;
599 };
600 };
601
602 otg_switch: OTG_SWITCH {
603 regulator-name = "otg_switch";
604 regulator-state-mem {
605 regulator-off-in-suspend;
606 };
607 };
608 };
609
610 rk817_charger: charger {
611 monitored-battery = <&battery>;
612 rockchip,resistor-sense-micro-ohms = <10000>;
613 rockchip,sleep-enter-current-microamp = <300000>;
614 rockchip,sleep-filter-current-microamp = <100000>;
615 };
616 };
617
618 vdd_cpu: regulator@1c {
619 compatible = "tcs,tcs4525";
620 reg = <0x1c>;
621 fcs,suspend-voltage-selector = <1>;
622 regulator-always-on;
623 regulator-boot-on;
624 regulator-min-microvolt = <712500>;
625 regulator-max-microvolt = <1390000>;
626 regulator-name = "vdd_cpu";
627 regulator-ramp-delay = <2300>;
628 vin-supply = <&vcc_sys>;
629 regulator-state-mem {
630 regulator-off-in-suspend;
631 };
632 };
633};
634
635&i2c5 {
636 pinctrl-0 = <&i2c5m1_xfer>;
637 pinctrl-names = "default";
638 status = "okay";
639};
640
641&i2s0_8ch {
642 status = "okay";
643};
644
645&i2s1_8ch {
646 pinctrl-0 = <&i2s1m0_sclktx
647 &i2s1m0_lrcktx
648 &i2s1m0_sdi0
649 &i2s1m0_sdo0>;
650 pinctrl-names = "default";
651 rockchip,trcm-sync-tx-only;
652 status = "okay";
653};
654
655&pinctrl {
656 gpio-btns {
657 btn_pins_ctrl: btn-pins-ctrl {
658 rockchip,pins =
659 <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>,
660 <3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
661 <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
662 <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
663 <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
664 <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
665 <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>,
666 <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>,
667 <3 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>,
668 <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
669 <3 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>,
670 <3 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
671 <3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_up>,
672 <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>,
673 <3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>,
674 <3 RK_PC3 RK_FUNC_GPIO &pcfg_pull_up>;
675 };
676
677 btn_pins_vol: btn-pins-vol {
678 rockchip,pins =
679 <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
680 <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
681 };
682 };
683
684 joy-mux {
685 joy_mux_en: joy-mux-en {
686 rockchip,pins =
687 <0 RK_PB5 RK_FUNC_GPIO &pcfg_output_low>;
688 };
689 };
690
691 gpio-lcd {
692 lcd_rst: lcd-rst {
693 rockchip,pins =
694 <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
695 };
696 };
697
698 pmic {
699 pmic_int_l: pmic-int-l {
700 rockchip,pins =
701 <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
702 };
703 };
704
705 sdio-pwrseq {
706 wifi_enable_h: wifi-enable-h {
707 rockchip,pins =
708 <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
709 };
710 };
711
712 vcc3v3-lcd {
713 vcc_lcd_h: vcc-lcd-h {
714 rockchip,pins =
715 <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
716 };
717 };
718
719 vcc-wifi {
720 vcc_wifi_h: vcc-wifi-h {
721 rockchip,pins =
722 <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
723 };
724 };
725};
726
727&pmu_io_domains {
728 status = "okay";
729 pmuio1-supply = <&vcc3v3_pmu>;
730 pmuio2-supply = <&vcc3v3_pmu>;
731 vccio1-supply = <&vccio_acodec>;
732 vccio3-supply = <&vccio_sd>;
733 vccio4-supply = <&vcc_1v8>;
734 vccio5-supply = <&vcc_3v3>;
735 vccio6-supply = <&vcc1v8_dvp>;
736 vccio7-supply = <&vcc_3v3>;
737};
738
739&pwm4 {
740 status = "okay";
741};
742
743&pwm6 {
744 status = "okay";
745};
746
747&pwm7 {
748 status = "okay";
749};
750
751&saradc {
752 vref-supply = <&vcc_1v8>;
753 status = "okay";
754};
755
756&sdmmc0 {
757 bus-width = <4>;
758 cap-sd-highspeed;
759 cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
760 disable-wp;
761 pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
762 pinctrl-names = "default";
763 sd-uhs-sdr104;
764 vmmc-supply = <&vcc_3v3>;
765 vqmmc-supply = <&vccio_sd>;
766 status = "okay";
767};
768
769&sdmmc1 {
770 bus-width = <4>;
771 cap-sd-highspeed;
772 cd-gpios = <&gpio2 RK_PB2 GPIO_ACTIVE_LOW>;
773 disable-wp;
774 pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk &sdmmc1_det>;
775 pinctrl-names = "default";
776 sd-uhs-sdr104;
777 vmmc-supply = <&vcc_3v3>;
778 vqmmc-supply = <&vcc1v8_dvp>;
779 status = "okay";
780};
781
782&sdmmc2 {
783 bus-width = <4>;
784 cap-sd-highspeed;
785 cap-sdio-irq;
786 keep-power-in-suspend;
787 mmc-pwrseq = <&sdio_pwrseq>;
788 non-removable;
789 pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>;
790 pinctrl-names = "default";
791 vmmc-supply = <&vcc_wifi>;
792 vqmmc-supply = <&vcca1v8_pmu>;
793 status = "okay";
794};
795
796&tsadc {
797 rockchip,hw-tshut-mode = <1>;
798 rockchip,hw-tshut-polarity = <0>;
799 status = "okay";
800};
801
802&uart1 {
803 pinctrl-0 = <&uart1m1_xfer &uart1m1_ctsn &uart1m1_rtsn>;
804 pinctrl-names = "default";
805 uart-has-rtscts;
806 status = "okay";
807
808 bluetooth {
809 compatible = "realtek,rtl8821cs-bt", "realtek,rtl8723bs-bt";
810 device-wake-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>;
811 enable-gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
812 host-wake-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>;
813 };
814};
815
816&usb_host0_xhci {
817 dr_mode = "peripheral";
818 phys = <&usb2phy0_otg>;
819 phy-names = "usb2-phy";
820 status = "okay";
821};
822
823&usb_host1_ehci {
824 status = "okay";
825};
826
827&usb_host1_ohci {
828 status = "okay";
829};
830
831&usb_host1_xhci {
832 phy-names = "usb2-phy", "usb3-phy";
833 phys = <&usb2phy1_host>, <&combphy1 PHY_TYPE_USB3>;
834 status = "okay";
835};
836
837&usb2phy0 {
838 status = "okay";
839};
840
841&usb2phy0_otg {
842 status = "okay";
843};
844
845&usb2phy1 {
846 status = "okay";
847};
848
849&usb2phy1_host {
850 status = "okay";
851};
852
853&vop {
854 assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
855 assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
856 status = "okay";
857};
858
859&vop_mmu {
860 status = "okay";
861};
862
863&vp0 {
864 vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
865 reg = <ROCKCHIP_VOP2_EP_HDMI0>;
866 remote-endpoint = <&hdmi_in_vp0>;
867 };
868};
869
870&vp1 {
871 vp1_out_dsi0: endpoint@ROCKCHIP_VOP2_EP_MIPI0 {
872 reg = <ROCKCHIP_VOP2_EP_MIPI0>;
873 remote-endpoint = <&dsi0_in_vp1>;
874 };
875};