blob: 60a5c37aeffb02ceda13a7c52a90744b5cc8f6bb [file] [log] [blame]
Dirk Eibachfb605942017-02-22 16:07:23 +01001#include <common.h>
2#include <dm.h>
3#include <miiphy.h>
4#include <asm-generic/gpio.h>
Simon Glass4dcacfc2020-05-10 11:40:13 -06005#include <linux/bitops.h>
Simon Glassdbd79542020-05-10 11:40:11 -06006#include <linux/delay.h>
Dirk Eibachfb605942017-02-22 16:07:23 +01007
8#include "ihs_phys.h"
9#include "dt_helpers.h"
10
11enum {
12 PORTTYPE_MAIN_CAT,
13 PORTTYPE_TOP_CAT,
14 PORTTYPE_16C_16F,
15 PORTTYPE_UNKNOWN
16};
17
18static struct porttype {
19 bool phy_invert_in_pol;
20 bool phy_invert_out_pol;
21} porttypes[] = {
22 { true, false },
23 { false, true },
24 { false, false },
25};
26
27static void ihs_phy_config(struct phy_device *phydev, bool qinpn, bool qoutpn)
28{
29 u16 reg;
30
Marek Behún3927efb2022-04-07 00:33:08 +020031 phydev->interface = PHY_INTERFACE_MODE_MII;
Dirk Eibachfb605942017-02-22 16:07:23 +010032 phy_config(phydev);
33
34 /* enable QSGMII autonegotiation with flow control */
35 phy_write(phydev, MDIO_DEVAD_NONE, 22, 0x0004);
36 reg = phy_read(phydev, MDIO_DEVAD_NONE, 16);
37 reg |= (3 << 6);
38 phy_write(phydev, MDIO_DEVAD_NONE, 16, reg);
39
40 /*
41 * invert QSGMII Q_INP/N and Q_OUTP/N if required
42 * and perform global reset
43 */
44 reg = phy_read(phydev, MDIO_DEVAD_NONE, 26);
45 if (qinpn)
46 reg |= (1 << 13);
47 if (qoutpn)
48 reg |= (1 << 12);
49 reg |= (1 << 15);
50 phy_write(phydev, MDIO_DEVAD_NONE, 26, reg);
51
52 /* advertise 1000BASE-T full-duplex only */
53 phy_write(phydev, MDIO_DEVAD_NONE, 22, 0x0000);
54 reg = phy_read(phydev, MDIO_DEVAD_NONE, 4);
55 reg &= ~0x1e0;
56 phy_write(phydev, MDIO_DEVAD_NONE, 4, reg);
57 reg = phy_read(phydev, MDIO_DEVAD_NONE, 9);
58 reg = (reg & ~0x300) | 0x200;
59 phy_write(phydev, MDIO_DEVAD_NONE, 9, reg);
60
61 /* copper power up */
62 reg = phy_read(phydev, MDIO_DEVAD_NONE, 16);
63 reg &= ~0x0004;
64 phy_write(phydev, MDIO_DEVAD_NONE, 16, reg);
65}
66
67uint calculate_octo_phy_mask(void)
68{
69 uint k;
70 uint octo_phy_mask = 0;
71 struct gpio_desc gpio = {};
72 char gpio_name[64];
73 static const char * const dev_name[] = {"pca9698@23", "pca9698@21",
74 "pca9698@24", "pca9698@25",
75 "pca9698@26"};
76
77 /* mark all octo phys that should be present */
78 for (k = 0; k < 5; ++k) {
79 snprintf(gpio_name, 64, "cat-gpio-%u", k);
80
81 if (request_gpio_by_name(&gpio, dev_name[k], 0x20, gpio_name))
82 continue;
83
84 /* check CAT flag */
85 if (dm_gpio_get_value(&gpio))
86 octo_phy_mask |= (1 << (k * 2));
87 else
88 /* If CAT == 0, there's no second octo phy -> skip */
89 continue;
90
91 snprintf(gpio_name, 64, "second-octo-gpio-%u", k);
92
93 if (request_gpio_by_name(&gpio, dev_name[k], 0x27, gpio_name)) {
94 /* default: second octo phy is present */
95 octo_phy_mask |= (1 << (k * 2 + 1));
96 continue;
97 }
98
99 if (dm_gpio_get_value(&gpio) == 0)
100 octo_phy_mask |= (1 << (k * 2 + 1));
101 }
102
103 return octo_phy_mask;
104}
105
106int register_miiphy_bus(uint k, struct mii_dev **bus)
107{
108 int retval;
109 struct mii_dev *mdiodev = mdio_alloc();
110 char *name = bb_miiphy_buses[k].name;
111
112 if (!mdiodev)
113 return -ENOMEM;
Vladimir Olteanbf2f9002021-09-27 14:21:42 +0300114 strlcpy(mdiodev->name, name, MDIO_NAME_LEN);
Dirk Eibachfb605942017-02-22 16:07:23 +0100115 mdiodev->read = bb_miiphy_read;
116 mdiodev->write = bb_miiphy_write;
117
118 retval = mdio_register(mdiodev);
119 if (retval < 0)
120 return retval;
121 *bus = miiphy_get_dev_by_name(name);
122
123 return 0;
124}
125
126struct porttype *get_porttype(uint octo_phy_mask, uint k)
127{
128 uint octo_index = k * 4;
129
130 if (!k) {
131 if (octo_phy_mask & 0x01)
132 return &porttypes[PORTTYPE_MAIN_CAT];
133 else if (!(octo_phy_mask & 0x03))
134 return &porttypes[PORTTYPE_16C_16F];
135 } else {
136 if (octo_phy_mask & (1 << octo_index))
137 return &porttypes[PORTTYPE_TOP_CAT];
138 }
139
140 return NULL;
141}
142
143int init_single_phy(struct porttype *porttype, struct mii_dev *bus,
144 uint bus_idx, uint m, uint phy_idx)
145{
Marek Behún3927efb2022-04-07 00:33:08 +0200146 struct phy_device *phydev;
Dirk Eibachfb605942017-02-22 16:07:23 +0100147
Marek Behún3927efb2022-04-07 00:33:08 +0200148 phydev = phy_find_by_mask(bus, BIT(m * 8 + phy_idx));
Dirk Eibachfb605942017-02-22 16:07:23 +0100149 printf(" %u", bus_idx * 32 + m * 8 + phy_idx);
150
151 if (!phydev)
152 puts("!");
153 else
154 ihs_phy_config(phydev, porttype->phy_invert_in_pol,
155 porttype->phy_invert_out_pol);
156
157 return 0;
158}
159
160int init_octo_phys(uint octo_phy_mask)
161{
162 uint bus_idx;
163
164 /* there are up to four octo-phys on each mdio bus */
165 for (bus_idx = 0; bus_idx < bb_miiphy_buses_num; ++bus_idx) {
166 uint m;
167 uint octo_index = bus_idx * 4;
168 struct mii_dev *bus = NULL;
169 struct porttype *porttype = NULL;
170 int ret;
171
172 porttype = get_porttype(octo_phy_mask, bus_idx);
173
174 if (!porttype)
175 continue;
176
177 for (m = 0; m < 4; ++m) {
178 uint phy_idx;
179
180 /**
181 * Register a bus device if there is at least one phy
182 * on the current bus
183 */
184 if (!m && octo_phy_mask & (0xf << octo_index)) {
185 ret = register_miiphy_bus(bus_idx, &bus);
186 if (ret)
187 return ret;
188 }
189
190 if (!(octo_phy_mask & BIT(octo_index + m)))
191 continue;
192
193 for (phy_idx = 0; phy_idx < 8; ++phy_idx)
194 init_single_phy(porttype, bus, bus_idx, m,
195 phy_idx);
196 }
197 }
198
199 return 0;
200}
201
202/*
203 * MII GPIO bitbang implementation
204 * MDC MDIO bus
205 * 13 14 PHY1-4
206 * 25 45 PHY5-8
207 * 46 24 PHY9-10
208 */
209
210struct gpio_mii {
211 int index;
212 struct gpio_desc mdc_gpio;
213 struct gpio_desc mdio_gpio;
214 int mdc_num;
215 int mdio_num;
216 int mdio_value;
217} gpio_mii_set[] = {
218 { 0, {}, {}, 13, 14, 1 },
219 { 1, {}, {}, 25, 45, 1 },
220 { 2, {}, {}, 46, 24, 1 },
221};
222
223static int mii_mdio_init(struct bb_miiphy_bus *bus)
224{
225 struct gpio_mii *gpio_mii = bus->priv;
226 char name[32] = {};
227 struct udevice *gpio_dev1 = NULL;
228 struct udevice *gpio_dev2 = NULL;
229
230 if (uclass_get_device_by_name(UCLASS_GPIO, "gpio@18100", &gpio_dev1) ||
231 uclass_get_device_by_name(UCLASS_GPIO, "gpio@18140", &gpio_dev2)) {
232 printf("Could not get GPIO device.\n");
233 return 1;
234 }
235
236 if (gpio_mii->mdc_num > 31) {
237 gpio_mii->mdc_gpio.dev = gpio_dev2;
238 gpio_mii->mdc_gpio.offset = gpio_mii->mdc_num - 32;
239 } else {
240 gpio_mii->mdc_gpio.dev = gpio_dev1;
241 gpio_mii->mdc_gpio.offset = gpio_mii->mdc_num;
242 }
243 gpio_mii->mdc_gpio.flags = 0;
244 snprintf(name, 32, "bb_miiphy_bus-%d-mdc", gpio_mii->index);
245 dm_gpio_request(&gpio_mii->mdc_gpio, name);
246
247 if (gpio_mii->mdio_num > 31) {
248 gpio_mii->mdio_gpio.dev = gpio_dev2;
249 gpio_mii->mdio_gpio.offset = gpio_mii->mdio_num - 32;
250 } else {
251 gpio_mii->mdio_gpio.dev = gpio_dev1;
252 gpio_mii->mdio_gpio.offset = gpio_mii->mdio_num;
253 }
254 gpio_mii->mdio_gpio.flags = 0;
255 snprintf(name, 32, "bb_miiphy_bus-%d-mdio", gpio_mii->index);
256 dm_gpio_request(&gpio_mii->mdio_gpio, name);
257
258 dm_gpio_set_dir_flags(&gpio_mii->mdc_gpio, GPIOD_IS_OUT);
259 dm_gpio_set_value(&gpio_mii->mdc_gpio, 1);
260
261 return 0;
262}
263
264static int mii_mdio_active(struct bb_miiphy_bus *bus)
265{
266 struct gpio_mii *gpio_mii = bus->priv;
267
268 dm_gpio_set_value(&gpio_mii->mdc_gpio, gpio_mii->mdio_value);
269
270 return 0;
271}
272
273static int mii_mdio_tristate(struct bb_miiphy_bus *bus)
274{
275 struct gpio_mii *gpio_mii = bus->priv;
276
277 dm_gpio_set_dir_flags(&gpio_mii->mdio_gpio, GPIOD_IS_IN);
278
279 return 0;
280}
281
282static int mii_set_mdio(struct bb_miiphy_bus *bus, int v)
283{
284 struct gpio_mii *gpio_mii = bus->priv;
285
286 dm_gpio_set_dir_flags(&gpio_mii->mdio_gpio, GPIOD_IS_OUT);
287 dm_gpio_set_value(&gpio_mii->mdio_gpio, v);
288 gpio_mii->mdio_value = v;
289
290 return 0;
291}
292
293static int mii_get_mdio(struct bb_miiphy_bus *bus, int *v)
294{
295 struct gpio_mii *gpio_mii = bus->priv;
296
297 dm_gpio_set_dir_flags(&gpio_mii->mdio_gpio, GPIOD_IS_IN);
298 *v = (dm_gpio_get_value(&gpio_mii->mdio_gpio));
299
300 return 0;
301}
302
303static int mii_set_mdc(struct bb_miiphy_bus *bus, int v)
304{
305 struct gpio_mii *gpio_mii = bus->priv;
306
307 dm_gpio_set_value(&gpio_mii->mdc_gpio, v);
308
309 return 0;
310}
311
312static int mii_delay(struct bb_miiphy_bus *bus)
313{
314 udelay(1);
315
316 return 0;
317}
318
319struct bb_miiphy_bus bb_miiphy_buses[] = {
320 {
321 .name = "ihs0",
322 .init = mii_mdio_init,
323 .mdio_active = mii_mdio_active,
324 .mdio_tristate = mii_mdio_tristate,
325 .set_mdio = mii_set_mdio,
326 .get_mdio = mii_get_mdio,
327 .set_mdc = mii_set_mdc,
328 .delay = mii_delay,
329 .priv = &gpio_mii_set[0],
330 },
331 {
332 .name = "ihs1",
333 .init = mii_mdio_init,
334 .mdio_active = mii_mdio_active,
335 .mdio_tristate = mii_mdio_tristate,
336 .set_mdio = mii_set_mdio,
337 .get_mdio = mii_get_mdio,
338 .set_mdc = mii_set_mdc,
339 .delay = mii_delay,
340 .priv = &gpio_mii_set[1],
341 },
342 {
343 .name = "ihs2",
344 .init = mii_mdio_init,
345 .mdio_active = mii_mdio_active,
346 .mdio_tristate = mii_mdio_tristate,
347 .set_mdio = mii_set_mdio,
348 .get_mdio = mii_get_mdio,
349 .set_mdc = mii_set_mdc,
350 .delay = mii_delay,
351 .priv = &gpio_mii_set[2],
352 },
353};
354
355int bb_miiphy_buses_num = ARRAY_SIZE(bb_miiphy_buses);