Joseph Chen | 868dc1d | 2021-06-02 15:58:23 +0800 | [diff] [blame] | 1 | // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 | /* |
| 3 | * Copyright (c) 2021 Rockchip Electronics Co., Ltd. |
| 4 | * |
| 5 | */ |
| 6 | |
| 7 | /dts-v1/; |
| 8 | #include <dt-bindings/gpio/gpio.h> |
Chris Morgan | b4fa15d | 2023-02-13 16:27:37 -0600 | [diff] [blame] | 9 | #include <dt-bindings/leds/common.h> |
Joseph Chen | 868dc1d | 2021-06-02 15:58:23 +0800 | [diff] [blame] | 10 | #include <dt-bindings/pinctrl/rockchip.h> |
Chris Morgan | b4fa15d | 2023-02-13 16:27:37 -0600 | [diff] [blame] | 11 | #include <dt-bindings/soc/rockchip,vop2.h> |
Joseph Chen | 868dc1d | 2021-06-02 15:58:23 +0800 | [diff] [blame] | 12 | #include "rk3568.dtsi" |
| 13 | |
| 14 | / { |
| 15 | model = "Rockchip RK3568 EVB1 DDR4 V10 Board"; |
| 16 | compatible = "rockchip,rk3568-evb1-v10", "rockchip,rk3568"; |
| 17 | |
Chris Morgan | b4fa15d | 2023-02-13 16:27:37 -0600 | [diff] [blame] | 18 | aliases { |
| 19 | ethernet0 = &gmac0; |
| 20 | ethernet1 = &gmac1; |
| 21 | mmc0 = &sdmmc0; |
| 22 | mmc1 = &sdhci; |
| 23 | }; |
| 24 | |
Joseph Chen | 868dc1d | 2021-06-02 15:58:23 +0800 | [diff] [blame] | 25 | chosen: chosen { |
| 26 | stdout-path = "serial2:1500000n8"; |
| 27 | }; |
| 28 | |
| 29 | dc_12v: dc-12v { |
| 30 | compatible = "regulator-fixed"; |
| 31 | regulator-name = "dc_12v"; |
| 32 | regulator-always-on; |
| 33 | regulator-boot-on; |
| 34 | regulator-min-microvolt = <12000000>; |
| 35 | regulator-max-microvolt = <12000000>; |
| 36 | }; |
| 37 | |
Chris Morgan | b4fa15d | 2023-02-13 16:27:37 -0600 | [diff] [blame] | 38 | hdmi-con { |
| 39 | compatible = "hdmi-connector"; |
| 40 | type = "a"; |
| 41 | |
| 42 | port { |
| 43 | hdmi_con_in: endpoint { |
| 44 | remote-endpoint = <&hdmi_out_con>; |
| 45 | }; |
| 46 | }; |
| 47 | }; |
| 48 | |
| 49 | leds { |
| 50 | compatible = "gpio-leds"; |
| 51 | |
| 52 | led_work: led-0 { |
| 53 | gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>; |
| 54 | function = LED_FUNCTION_HEARTBEAT; |
| 55 | color = <LED_COLOR_ID_BLUE>; |
| 56 | linux,default-trigger = "heartbeat"; |
| 57 | pinctrl-names = "default"; |
| 58 | pinctrl-0 = <&led_work_en>; |
| 59 | }; |
| 60 | }; |
| 61 | |
| 62 | rk809-sound { |
| 63 | compatible = "simple-audio-card"; |
| 64 | simple-audio-card,format = "i2s"; |
| 65 | simple-audio-card,name = "Analog RK809"; |
| 66 | simple-audio-card,mclk-fs = <256>; |
| 67 | |
| 68 | simple-audio-card,cpu { |
| 69 | sound-dai = <&i2s1_8ch>; |
| 70 | }; |
| 71 | simple-audio-card,codec { |
| 72 | sound-dai = <&rk809>; |
| 73 | }; |
| 74 | }; |
| 75 | |
Joseph Chen | 868dc1d | 2021-06-02 15:58:23 +0800 | [diff] [blame] | 76 | vcc3v3_sys: vcc3v3-sys { |
| 77 | compatible = "regulator-fixed"; |
| 78 | regulator-name = "vcc3v3_sys"; |
| 79 | regulator-always-on; |
| 80 | regulator-boot-on; |
| 81 | regulator-min-microvolt = <3300000>; |
| 82 | regulator-max-microvolt = <3300000>; |
| 83 | vin-supply = <&dc_12v>; |
| 84 | }; |
| 85 | |
| 86 | vcc5v0_sys: vcc5v0-sys { |
| 87 | compatible = "regulator-fixed"; |
| 88 | regulator-name = "vcc5v0_sys"; |
| 89 | regulator-always-on; |
| 90 | regulator-boot-on; |
| 91 | regulator-min-microvolt = <5000000>; |
| 92 | regulator-max-microvolt = <5000000>; |
| 93 | vin-supply = <&dc_12v>; |
| 94 | }; |
| 95 | |
Chris Morgan | b4fa15d | 2023-02-13 16:27:37 -0600 | [diff] [blame] | 96 | vcc5v0_usb: vcc5v0-usb { |
| 97 | compatible = "regulator-fixed"; |
| 98 | regulator-name = "vcc5v0_usb"; |
| 99 | regulator-always-on; |
| 100 | regulator-boot-on; |
| 101 | regulator-min-microvolt = <5000000>; |
| 102 | regulator-max-microvolt = <5000000>; |
| 103 | vin-supply = <&dc_12v>; |
| 104 | }; |
| 105 | |
| 106 | vcc5v0_usb_host: vcc5v0-usb-host { |
| 107 | compatible = "regulator-fixed"; |
| 108 | enable-active-high; |
| 109 | gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; |
| 110 | pinctrl-names = "default"; |
| 111 | pinctrl-0 = <&vcc5v0_usb_host_en>; |
| 112 | regulator-name = "vcc5v0_usb_host"; |
| 113 | regulator-min-microvolt = <5000000>; |
| 114 | regulator-max-microvolt = <5000000>; |
| 115 | vin-supply = <&vcc5v0_usb>; |
| 116 | }; |
| 117 | |
| 118 | vcc5v0_usb_otg: vcc5v0-usb-otg { |
| 119 | compatible = "regulator-fixed"; |
| 120 | enable-active-high; |
| 121 | gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; |
| 122 | pinctrl-names = "default"; |
| 123 | pinctrl-0 = <&vcc5v0_usb_otg_en>; |
| 124 | regulator-name = "vcc5v0_usb_otg"; |
| 125 | regulator-min-microvolt = <5000000>; |
| 126 | regulator-max-microvolt = <5000000>; |
| 127 | vin-supply = <&vcc5v0_usb>; |
| 128 | }; |
| 129 | |
Joseph Chen | 868dc1d | 2021-06-02 15:58:23 +0800 | [diff] [blame] | 130 | vcc3v3_lcd0_n: vcc3v3-lcd0-n { |
| 131 | compatible = "regulator-fixed"; |
| 132 | regulator-name = "vcc3v3_lcd0_n"; |
Chris Morgan | b4fa15d | 2023-02-13 16:27:37 -0600 | [diff] [blame] | 133 | regulator-min-microvolt = <3300000>; |
| 134 | regulator-max-microvolt = <3300000>; |
| 135 | enable-active-high; |
| 136 | gpio = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>; |
| 137 | vin-supply = <&vcc3v3_sys>; |
| 138 | pinctrl-names = "default"; |
| 139 | pinctrl-0 = <&vcc3v3_lcd0_n_en>; |
Joseph Chen | 868dc1d | 2021-06-02 15:58:23 +0800 | [diff] [blame] | 140 | |
| 141 | regulator-state-mem { |
| 142 | regulator-off-in-suspend; |
| 143 | }; |
| 144 | }; |
| 145 | |
| 146 | vcc3v3_lcd1_n: vcc3v3-lcd1-n { |
| 147 | compatible = "regulator-fixed"; |
| 148 | regulator-name = "vcc3v3_lcd1_n"; |
Chris Morgan | b4fa15d | 2023-02-13 16:27:37 -0600 | [diff] [blame] | 149 | regulator-min-microvolt = <3300000>; |
| 150 | regulator-max-microvolt = <3300000>; |
| 151 | enable-active-high; |
| 152 | gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>; |
| 153 | vin-supply = <&vcc3v3_sys>; |
| 154 | pinctrl-names = "default"; |
| 155 | pinctrl-0 = <&vcc3v3_lcd1_n_en>; |
| 156 | |
| 157 | regulator-state-mem { |
| 158 | regulator-off-in-suspend; |
| 159 | }; |
| 160 | }; |
| 161 | }; |
| 162 | |
| 163 | &combphy0 { |
| 164 | status = "okay"; |
| 165 | }; |
| 166 | |
| 167 | &combphy1 { |
| 168 | status = "okay"; |
| 169 | }; |
| 170 | |
| 171 | &cpu0 { |
| 172 | cpu-supply = <&vdd_cpu>; |
| 173 | }; |
| 174 | |
| 175 | &cpu1 { |
| 176 | cpu-supply = <&vdd_cpu>; |
| 177 | }; |
| 178 | |
| 179 | &cpu2 { |
| 180 | cpu-supply = <&vdd_cpu>; |
| 181 | }; |
| 182 | |
| 183 | &cpu3 { |
| 184 | cpu-supply = <&vdd_cpu>; |
| 185 | }; |
| 186 | |
| 187 | &gmac0 { |
| 188 | assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>; |
| 189 | assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>; |
| 190 | assigned-clock-rates = <0>, <125000000>; |
| 191 | clock_in_out = "output"; |
| 192 | phy-handle = <&rgmii_phy0>; |
| 193 | phy-mode = "rgmii-id"; |
| 194 | pinctrl-names = "default"; |
| 195 | pinctrl-0 = <&gmac0_miim |
| 196 | &gmac0_tx_bus2 |
| 197 | &gmac0_rx_bus2 |
| 198 | &gmac0_rgmii_clk |
| 199 | &gmac0_rgmii_bus>; |
| 200 | status = "okay"; |
| 201 | }; |
| 202 | |
| 203 | &gmac1 { |
| 204 | assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>; |
| 205 | assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>; |
| 206 | assigned-clock-rates = <0>, <125000000>; |
| 207 | clock_in_out = "output"; |
| 208 | phy-handle = <&rgmii_phy1>; |
| 209 | phy-mode = "rgmii-id"; |
| 210 | pinctrl-names = "default"; |
| 211 | pinctrl-0 = <&gmac1m1_miim |
| 212 | &gmac1m1_tx_bus2 |
| 213 | &gmac1m1_rx_bus2 |
| 214 | &gmac1m1_rgmii_clk |
| 215 | &gmac1m1_rgmii_bus>; |
| 216 | status = "okay"; |
| 217 | }; |
| 218 | |
| 219 | &gpu { |
| 220 | mali-supply = <&vdd_gpu>; |
| 221 | status = "okay"; |
| 222 | }; |
| 223 | |
| 224 | &hdmi { |
| 225 | avdd-0v9-supply = <&vdda0v9_image>; |
| 226 | avdd-1v8-supply = <&vcca1v8_image>; |
| 227 | status = "okay"; |
| 228 | }; |
| 229 | |
| 230 | &hdmi_in { |
| 231 | hdmi_in_vp0: endpoint { |
| 232 | remote-endpoint = <&vp0_out_hdmi>; |
| 233 | }; |
| 234 | }; |
| 235 | |
| 236 | &hdmi_out { |
| 237 | hdmi_out_con: endpoint { |
| 238 | remote-endpoint = <&hdmi_con_in>; |
| 239 | }; |
| 240 | }; |
| 241 | |
| 242 | &hdmi_sound { |
| 243 | status = "okay"; |
| 244 | }; |
| 245 | |
| 246 | &i2c0 { |
| 247 | status = "okay"; |
| 248 | |
| 249 | vdd_cpu: regulator@1c { |
| 250 | compatible = "tcs,tcs4525"; |
| 251 | reg = <0x1c>; |
| 252 | fcs,suspend-voltage-selector = <1>; |
| 253 | regulator-name = "vdd_cpu"; |
| 254 | regulator-always-on; |
Joseph Chen | 868dc1d | 2021-06-02 15:58:23 +0800 | [diff] [blame] | 255 | regulator-boot-on; |
Chris Morgan | b4fa15d | 2023-02-13 16:27:37 -0600 | [diff] [blame] | 256 | regulator-min-microvolt = <800000>; |
| 257 | regulator-max-microvolt = <1150000>; |
| 258 | regulator-ramp-delay = <2300>; |
| 259 | vin-supply = <&vcc5v0_sys>; |
Joseph Chen | 868dc1d | 2021-06-02 15:58:23 +0800 | [diff] [blame] | 260 | |
| 261 | regulator-state-mem { |
| 262 | regulator-off-in-suspend; |
| 263 | }; |
| 264 | }; |
Chris Morgan | b4fa15d | 2023-02-13 16:27:37 -0600 | [diff] [blame] | 265 | |
| 266 | rk809: pmic@20 { |
| 267 | compatible = "rockchip,rk809"; |
| 268 | reg = <0x20>; |
| 269 | interrupt-parent = <&gpio0>; |
| 270 | interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; |
| 271 | assigned-clocks = <&cru I2S1_MCLKOUT_TX>; |
| 272 | assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; |
| 273 | #clock-cells = <1>; |
| 274 | clock-names = "mclk"; |
| 275 | clocks = <&cru I2S1_MCLKOUT_TX>; |
| 276 | pinctrl-names = "default"; |
| 277 | pinctrl-0 = <&pmic_int>, <&i2s1m0_mclk>; |
| 278 | rockchip,system-power-controller; |
| 279 | #sound-dai-cells = <0>; |
| 280 | vcc1-supply = <&vcc3v3_sys>; |
| 281 | vcc2-supply = <&vcc3v3_sys>; |
| 282 | vcc3-supply = <&vcc3v3_sys>; |
| 283 | vcc4-supply = <&vcc3v3_sys>; |
| 284 | vcc5-supply = <&vcc3v3_sys>; |
| 285 | vcc6-supply = <&vcc3v3_sys>; |
| 286 | vcc7-supply = <&vcc3v3_sys>; |
| 287 | vcc8-supply = <&vcc3v3_sys>; |
| 288 | vcc9-supply = <&vcc3v3_sys>; |
| 289 | wakeup-source; |
| 290 | |
| 291 | regulators { |
| 292 | vdd_logic: DCDC_REG1 { |
| 293 | regulator-name = "vdd_logic"; |
| 294 | regulator-always-on; |
| 295 | regulator-boot-on; |
| 296 | regulator-init-microvolt = <900000>; |
| 297 | regulator-initial-mode = <0x2>; |
| 298 | regulator-min-microvolt = <500000>; |
| 299 | regulator-max-microvolt = <1350000>; |
| 300 | regulator-ramp-delay = <6001>; |
| 301 | |
| 302 | regulator-state-mem { |
| 303 | regulator-off-in-suspend; |
| 304 | }; |
| 305 | }; |
| 306 | |
| 307 | vdd_gpu: DCDC_REG2 { |
| 308 | regulator-name = "vdd_gpu"; |
| 309 | regulator-always-on; |
| 310 | regulator-init-microvolt = <900000>; |
| 311 | regulator-initial-mode = <0x2>; |
| 312 | regulator-min-microvolt = <500000>; |
| 313 | regulator-max-microvolt = <1350000>; |
| 314 | regulator-ramp-delay = <6001>; |
| 315 | |
| 316 | regulator-state-mem { |
| 317 | regulator-off-in-suspend; |
| 318 | }; |
| 319 | }; |
| 320 | |
| 321 | vcc_ddr: DCDC_REG3 { |
| 322 | regulator-name = "vcc_ddr"; |
| 323 | regulator-always-on; |
| 324 | regulator-boot-on; |
| 325 | regulator-initial-mode = <0x2>; |
| 326 | |
| 327 | regulator-state-mem { |
| 328 | regulator-on-in-suspend; |
| 329 | }; |
| 330 | }; |
| 331 | |
| 332 | vdd_npu: DCDC_REG4 { |
| 333 | regulator-name = "vdd_npu"; |
| 334 | regulator-init-microvolt = <900000>; |
| 335 | regulator-initial-mode = <0x2>; |
| 336 | regulator-min-microvolt = <500000>; |
| 337 | regulator-max-microvolt = <1350000>; |
| 338 | regulator-ramp-delay = <6001>; |
| 339 | |
| 340 | regulator-state-mem { |
| 341 | regulator-off-in-suspend; |
| 342 | }; |
| 343 | }; |
| 344 | |
| 345 | vcc_1v8: DCDC_REG5 { |
| 346 | regulator-name = "vcc_1v8"; |
| 347 | regulator-always-on; |
| 348 | regulator-boot-on; |
| 349 | regulator-min-microvolt = <1800000>; |
| 350 | regulator-max-microvolt = <1800000>; |
| 351 | |
| 352 | regulator-state-mem { |
| 353 | regulator-off-in-suspend; |
| 354 | }; |
| 355 | }; |
| 356 | |
| 357 | vdda0v9_image: LDO_REG1 { |
| 358 | regulator-name = "vdda0v9_image"; |
| 359 | regulator-min-microvolt = <900000>; |
| 360 | regulator-max-microvolt = <900000>; |
| 361 | |
| 362 | regulator-state-mem { |
| 363 | regulator-off-in-suspend; |
| 364 | }; |
| 365 | }; |
| 366 | |
| 367 | vdda_0v9: LDO_REG2 { |
| 368 | regulator-name = "vdda_0v9"; |
| 369 | regulator-always-on; |
| 370 | regulator-boot-on; |
| 371 | regulator-min-microvolt = <900000>; |
| 372 | regulator-max-microvolt = <900000>; |
| 373 | |
| 374 | regulator-state-mem { |
| 375 | regulator-off-in-suspend; |
| 376 | }; |
| 377 | }; |
| 378 | |
| 379 | vdda0v9_pmu: LDO_REG3 { |
| 380 | regulator-name = "vdda0v9_pmu"; |
| 381 | regulator-always-on; |
| 382 | regulator-boot-on; |
| 383 | regulator-min-microvolt = <900000>; |
| 384 | regulator-max-microvolt = <900000>; |
| 385 | |
| 386 | regulator-state-mem { |
| 387 | regulator-on-in-suspend; |
| 388 | regulator-suspend-microvolt = <900000>; |
| 389 | }; |
| 390 | }; |
| 391 | |
| 392 | vccio_acodec: LDO_REG4 { |
| 393 | regulator-name = "vccio_acodec"; |
| 394 | regulator-always-on; |
| 395 | regulator-min-microvolt = <3300000>; |
| 396 | regulator-max-microvolt = <3300000>; |
| 397 | |
| 398 | regulator-state-mem { |
| 399 | regulator-off-in-suspend; |
| 400 | }; |
| 401 | }; |
| 402 | |
| 403 | vccio_sd: LDO_REG5 { |
| 404 | regulator-name = "vccio_sd"; |
| 405 | regulator-min-microvolt = <1800000>; |
| 406 | regulator-max-microvolt = <3300000>; |
| 407 | |
| 408 | regulator-state-mem { |
| 409 | regulator-off-in-suspend; |
| 410 | }; |
| 411 | }; |
| 412 | |
| 413 | vcc3v3_pmu: LDO_REG6 { |
| 414 | regulator-name = "vcc3v3_pmu"; |
| 415 | regulator-always-on; |
| 416 | regulator-boot-on; |
| 417 | regulator-min-microvolt = <3300000>; |
| 418 | regulator-max-microvolt = <3300000>; |
| 419 | |
| 420 | regulator-state-mem { |
| 421 | regulator-on-in-suspend; |
| 422 | regulator-suspend-microvolt = <3300000>; |
| 423 | }; |
| 424 | }; |
| 425 | |
| 426 | vcca_1v8: LDO_REG7 { |
| 427 | regulator-name = "vcca_1v8"; |
| 428 | regulator-always-on; |
| 429 | regulator-boot-on; |
| 430 | regulator-min-microvolt = <1800000>; |
| 431 | regulator-max-microvolt = <1800000>; |
| 432 | |
| 433 | regulator-state-mem { |
| 434 | regulator-off-in-suspend; |
| 435 | }; |
| 436 | }; |
| 437 | |
| 438 | vcca1v8_pmu: LDO_REG8 { |
| 439 | regulator-name = "vcca1v8_pmu"; |
| 440 | regulator-always-on; |
| 441 | regulator-boot-on; |
| 442 | regulator-min-microvolt = <1800000>; |
| 443 | regulator-max-microvolt = <1800000>; |
| 444 | |
| 445 | regulator-state-mem { |
| 446 | regulator-on-in-suspend; |
| 447 | regulator-suspend-microvolt = <1800000>; |
| 448 | }; |
| 449 | }; |
| 450 | |
| 451 | vcca1v8_image: LDO_REG9 { |
| 452 | regulator-name = "vcca1v8_image"; |
| 453 | regulator-min-microvolt = <1800000>; |
| 454 | regulator-max-microvolt = <1800000>; |
| 455 | |
| 456 | regulator-state-mem { |
| 457 | regulator-off-in-suspend; |
| 458 | }; |
| 459 | }; |
| 460 | |
| 461 | vcc_3v3: SWITCH_REG1 { |
| 462 | regulator-name = "vcc_3v3"; |
| 463 | regulator-always-on; |
| 464 | regulator-boot-on; |
| 465 | |
| 466 | regulator-state-mem { |
| 467 | regulator-off-in-suspend; |
| 468 | }; |
| 469 | }; |
| 470 | |
| 471 | vcc3v3_sd: SWITCH_REG2 { |
| 472 | regulator-name = "vcc3v3_sd"; |
| 473 | |
| 474 | regulator-state-mem { |
| 475 | regulator-off-in-suspend; |
| 476 | }; |
| 477 | }; |
| 478 | }; |
| 479 | |
| 480 | codec { |
| 481 | mic-in-differential; |
| 482 | }; |
| 483 | }; |
| 484 | }; |
| 485 | |
| 486 | &i2c1 { |
| 487 | status = "okay"; |
| 488 | |
| 489 | touchscreen0: goodix@14 { |
| 490 | compatible = "goodix,gt1151"; |
| 491 | reg = <0x14>; |
| 492 | interrupt-parent = <&gpio0>; |
| 493 | interrupts = <RK_PB5 IRQ_TYPE_EDGE_FALLING>; |
| 494 | AVDD28-supply = <&vcc3v3_lcd0_n>; |
| 495 | irq-gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; |
| 496 | pinctrl-names = "default"; |
| 497 | pinctrl-0 = <&touch_int &touch_rst>; |
| 498 | reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; |
| 499 | VDDIO-supply = <&vcc3v3_lcd0_n>; |
| 500 | }; |
| 501 | }; |
| 502 | |
| 503 | &i2s0_8ch { |
| 504 | status = "okay"; |
| 505 | }; |
| 506 | |
| 507 | &i2s1_8ch { |
| 508 | rockchip,trcm-sync-tx-only; |
| 509 | status = "okay"; |
| 510 | }; |
| 511 | |
| 512 | &mdio0 { |
| 513 | rgmii_phy0: ethernet-phy@0 { |
| 514 | compatible = "ethernet-phy-ieee802.3-c22"; |
| 515 | reg = <0x0>; |
| 516 | reset-assert-us = <20000>; |
| 517 | reset-deassert-us = <100000>; |
| 518 | reset-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_LOW>; |
| 519 | }; |
| 520 | }; |
| 521 | |
| 522 | &mdio1 { |
| 523 | rgmii_phy1: ethernet-phy@0 { |
| 524 | compatible = "ethernet-phy-ieee802.3-c22"; |
| 525 | reg = <0x0>; |
| 526 | reset-assert-us = <20000>; |
| 527 | reset-deassert-us = <100000>; |
| 528 | reset-gpios = <&gpio2 RK_PD1 GPIO_ACTIVE_LOW>; |
| 529 | }; |
| 530 | }; |
| 531 | |
| 532 | &pinctrl { |
| 533 | display { |
| 534 | vcc3v3_lcd0_n_en: vcc3v3_lcd0_n_en { |
| 535 | rockchip,pins = <0 RK_PC7 0 &pcfg_pull_none>; |
| 536 | }; |
| 537 | vcc3v3_lcd1_n_en: vcc3v3_lcd1_n_en { |
| 538 | rockchip,pins = <0 RK_PC5 0 &pcfg_pull_none>; |
| 539 | }; |
| 540 | }; |
| 541 | |
| 542 | leds { |
| 543 | led_work_en: led_work_en { |
| 544 | rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>; |
| 545 | }; |
| 546 | }; |
| 547 | |
| 548 | pmic { |
| 549 | pmic_int: pmic_int { |
| 550 | rockchip,pins = |
| 551 | <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; |
| 552 | }; |
| 553 | }; |
| 554 | |
| 555 | touchscreen { |
| 556 | touch_int: touch_int { |
| 557 | rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>; |
| 558 | }; |
| 559 | touch_rst: touch_rst { |
| 560 | rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; |
| 561 | }; |
| 562 | }; |
| 563 | |
| 564 | usb { |
| 565 | vcc5v0_usb_host_en: vcc5v0_usb_host_en { |
| 566 | rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; |
| 567 | }; |
| 568 | vcc5v0_usb_otg_en: vcc5v0_usb_otg_en { |
| 569 | rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; |
| 570 | }; |
| 571 | }; |
| 572 | }; |
| 573 | |
| 574 | &pmu_io_domains { |
| 575 | pmuio1-supply = <&vcc3v3_pmu>; |
| 576 | pmuio2-supply = <&vcc3v3_pmu>; |
| 577 | vccio1-supply = <&vccio_acodec>; |
| 578 | vccio2-supply = <&vcc_1v8>; |
| 579 | vccio3-supply = <&vccio_sd>; |
| 580 | vccio4-supply = <&vcc_1v8>; |
| 581 | vccio5-supply = <&vcc_3v3>; |
| 582 | vccio6-supply = <&vcc_1v8>; |
| 583 | vccio7-supply = <&vcc_3v3>; |
| 584 | status = "okay"; |
| 585 | }; |
| 586 | |
| 587 | &saradc { |
| 588 | vref-supply = <&vcca_1v8>; |
| 589 | status = "okay"; |
Joseph Chen | 868dc1d | 2021-06-02 15:58:23 +0800 | [diff] [blame] | 590 | }; |
| 591 | |
| 592 | &sdhci { |
| 593 | bus-width = <8>; |
| 594 | max-frequency = <200000000>; |
| 595 | non-removable; |
Chris Morgan | b4fa15d | 2023-02-13 16:27:37 -0600 | [diff] [blame] | 596 | pinctrl-names = "default"; |
| 597 | pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>; |
| 598 | status = "okay"; |
| 599 | }; |
| 600 | |
| 601 | &sdmmc0 { |
| 602 | bus-width = <4>; |
| 603 | cap-sd-highspeed; |
| 604 | cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; |
| 605 | disable-wp; |
| 606 | pinctrl-names = "default"; |
| 607 | pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; |
| 608 | sd-uhs-sdr104; |
| 609 | vmmc-supply = <&vcc3v3_sd>; |
| 610 | vqmmc-supply = <&vccio_sd>; |
| 611 | status = "okay"; |
| 612 | }; |
| 613 | |
| 614 | &tsadc { |
| 615 | rockchip,hw-tshut-mode = <1>; |
| 616 | rockchip,hw-tshut-polarity = <0>; |
Joseph Chen | 868dc1d | 2021-06-02 15:58:23 +0800 | [diff] [blame] | 617 | status = "okay"; |
| 618 | }; |
| 619 | |
| 620 | &uart2 { |
| 621 | status = "okay"; |
| 622 | }; |
Chris Morgan | b4fa15d | 2023-02-13 16:27:37 -0600 | [diff] [blame] | 623 | |
| 624 | &usb_host0_ehci { |
| 625 | status = "okay"; |
| 626 | }; |
| 627 | |
| 628 | &usb_host0_ohci { |
| 629 | status = "okay"; |
| 630 | }; |
| 631 | |
| 632 | &usb_host0_xhci { |
| 633 | extcon = <&usb2phy0>; |
| 634 | status = "okay"; |
| 635 | }; |
| 636 | |
| 637 | &usb_host1_ehci { |
| 638 | status = "okay"; |
| 639 | }; |
| 640 | |
| 641 | &usb_host1_ohci { |
| 642 | status = "okay"; |
| 643 | }; |
| 644 | |
| 645 | &usb_host1_xhci { |
| 646 | status = "okay"; |
| 647 | }; |
| 648 | |
| 649 | &usb2phy0 { |
| 650 | status = "okay"; |
| 651 | }; |
| 652 | |
| 653 | &usb2phy0_host { |
| 654 | phy-supply = <&vcc5v0_usb_host>; |
| 655 | status = "okay"; |
| 656 | }; |
| 657 | |
| 658 | &usb2phy0_otg { |
| 659 | phy-supply = <&vcc5v0_usb_otg>; |
| 660 | status = "okay"; |
| 661 | }; |
| 662 | |
| 663 | &usb2phy1 { |
| 664 | status = "okay"; |
| 665 | }; |
| 666 | |
| 667 | &usb2phy1_host { |
| 668 | phy-supply = <&vcc5v0_usb_host>; |
| 669 | status = "okay"; |
| 670 | }; |
| 671 | |
| 672 | &usb2phy1_otg { |
| 673 | phy-supply = <&vcc5v0_usb_host>; |
| 674 | status = "okay"; |
| 675 | }; |
| 676 | |
| 677 | &vop { |
| 678 | assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; |
| 679 | assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; |
| 680 | status = "okay"; |
| 681 | }; |
| 682 | |
| 683 | &vop_mmu { |
| 684 | status = "okay"; |
| 685 | }; |
| 686 | |
| 687 | &vp0 { |
| 688 | vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { |
| 689 | reg = <ROCKCHIP_VOP2_EP_HDMI0>; |
| 690 | remote-endpoint = <&hdmi_in_vp0>; |
| 691 | }; |
| 692 | }; |