Jon Loeliger | 36c0b34 | 2007-10-16 13:54:01 -0500 | [diff] [blame^] | 1 | /* |
| 2 | * Copyright 2007 Freescale Semiconductor, Inc. |
| 3 | * |
| 4 | * See file CREDITS for list of people who contributed to this |
| 5 | * project. |
| 6 | * |
| 7 | * This program is free software; you can redistribute it and/or |
| 8 | * modify it under the terms of the GNU General Public License as |
| 9 | * published by the Free Software Foundation; either version 2 of |
| 10 | * the License, or (at your option) any later version. |
| 11 | * |
| 12 | * This program is distributed in the hope that it will be useful, |
| 13 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 14 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 15 | * GNU General Public License for more details. |
| 16 | * |
| 17 | * You should have received a copy of the GNU General Public License |
| 18 | * along with this program; if not, write to the Free Software |
| 19 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| 20 | * MA 02111-1307 USA |
| 21 | */ |
| 22 | #define DEBUG |
| 23 | #include <common.h> |
| 24 | #include <command.h> |
| 25 | #include <pci.h> |
| 26 | #include <asm/processor.h> |
| 27 | #include <asm/immap_86xx.h> |
| 28 | #include <asm/immap_fsl_pci.h> |
| 29 | #include <spd.h> |
| 30 | #include <asm/io.h> |
| 31 | |
| 32 | |
| 33 | #if defined(CONFIG_OF_FLAT_TREE) |
| 34 | #include <ft_build.h> |
| 35 | extern void ft_cpu_setup(void *blob, bd_t *bd); |
| 36 | #endif |
| 37 | |
| 38 | #include "../common/pixis.h" |
| 39 | |
| 40 | #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) |
| 41 | extern void ddr_enable_ecc(unsigned int dram_size); |
| 42 | #endif |
| 43 | |
| 44 | #if defined(CONFIG_SPD_EEPROM) |
| 45 | #include "spd_sdram.h" |
| 46 | #endif |
| 47 | |
| 48 | void sdram_init(void); |
| 49 | long int fixed_sdram(void); |
| 50 | |
| 51 | /* called before any console output */ |
| 52 | int board_early_init_f(void) |
| 53 | { |
| 54 | volatile immap_t *immap = (immap_t *)CFG_IMMR; |
| 55 | volatile ccsr_gur_t *gur = &immap->im_gur; |
| 56 | |
| 57 | gur->gpiocr |= 0x888a5500; /* DIU16, IR1, UART0, UART2 */ |
| 58 | |
| 59 | return 0; |
| 60 | } |
| 61 | |
| 62 | int checkboard(void) |
| 63 | { |
| 64 | volatile immap_t *immap = (immap_t *)CFG_IMMR; |
| 65 | volatile ccsr_lbc_t *memctl = &immap->im_lbc; |
| 66 | volatile ccsr_local_mcm_t *mcm = &immap->im_local_mcm; |
| 67 | |
| 68 | puts("Board: MPC8610HPCD\n"); |
| 69 | |
| 70 | mcm->abcr |= 0x00010000; /* 0 */ |
| 71 | mcm->hpmr3 = 0x80000008; /* 4c */ |
| 72 | mcm->hpmr0 = 0; |
| 73 | mcm->hpmr1 = 0; |
| 74 | mcm->hpmr2 = 0; |
| 75 | mcm->hpmr4 = 0; |
| 76 | mcm->hpmr5 = 0; |
| 77 | |
| 78 | return 0; |
| 79 | } |
| 80 | |
| 81 | |
| 82 | long int |
| 83 | initdram(int board_type) |
| 84 | { |
| 85 | long dram_size = 0; |
| 86 | |
| 87 | #if defined(CONFIG_SPD_EEPROM) |
| 88 | dram_size = spd_sdram(); |
| 89 | #else |
| 90 | dram_size = fixed_sdram(); |
| 91 | #endif |
| 92 | |
| 93 | #if defined(CFG_RAMBOOT) |
| 94 | puts(" DDR: "); |
| 95 | return dram_size; |
| 96 | #endif |
| 97 | |
| 98 | #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) |
| 99 | /* |
| 100 | * Initialize and enable DDR ECC. |
| 101 | */ |
| 102 | ddr_enable_ecc(dram_size); |
| 103 | #endif |
| 104 | |
| 105 | puts(" DDR: "); |
| 106 | return dram_size; |
| 107 | } |
| 108 | |
| 109 | |
| 110 | #if defined(CFG_DRAM_TEST) |
| 111 | int |
| 112 | testdram(void) |
| 113 | { |
| 114 | uint *pstart = (uint *) CFG_MEMTEST_START; |
| 115 | uint *pend = (uint *) CFG_MEMTEST_END; |
| 116 | uint *p; |
| 117 | |
| 118 | puts("SDRAM test phase 1:\n"); |
| 119 | for (p = pstart; p < pend; p++) |
| 120 | *p = 0xaaaaaaaa; |
| 121 | |
| 122 | for (p = pstart; p < pend; p++) { |
| 123 | if (*p != 0xaaaaaaaa) { |
| 124 | printf("SDRAM test fails at: %08x\n", (uint) p); |
| 125 | return 1; |
| 126 | } |
| 127 | } |
| 128 | |
| 129 | puts("SDRAM test phase 2:\n"); |
| 130 | for (p = pstart; p < pend; p++) |
| 131 | *p = 0x55555555; |
| 132 | |
| 133 | for (p = pstart; p < pend; p++) { |
| 134 | if (*p != 0x55555555) { |
| 135 | printf("SDRAM test fails at: %08x\n", (uint) p); |
| 136 | return 1; |
| 137 | } |
| 138 | } |
| 139 | |
| 140 | puts("SDRAM test passed.\n"); |
| 141 | return 0; |
| 142 | } |
| 143 | #endif |
| 144 | |
| 145 | |
| 146 | #if !defined(CONFIG_SPD_EEPROM) |
| 147 | /* |
| 148 | * Fixed sdram init -- doesn't use serial presence detect. |
| 149 | */ |
| 150 | |
| 151 | long int fixed_sdram(void) |
| 152 | { |
| 153 | #if !defined(CFG_RAMBOOT) |
| 154 | volatile immap_t *immap = (immap_t *)CFG_IMMR; |
| 155 | volatile ccsr_ddr_t *ddr = &immap->im_ddr1; |
| 156 | uint d_init; |
| 157 | |
| 158 | ddr->cs0_bnds = 0x0000001f; |
| 159 | ddr->cs0_config = 0x80010202; |
| 160 | |
| 161 | ddr->ext_refrec = 0x00000000; |
| 162 | ddr->timing_cfg_0 = 0x00260802; |
| 163 | ddr->timing_cfg_1 = 0x3935d322; |
| 164 | ddr->timing_cfg_2 = 0x14904cc8; |
| 165 | ddr->sdram_mode_1 = 0x00480432; |
| 166 | ddr->sdram_mode_2 = 0x00000000; |
| 167 | ddr->sdram_interval = 0x06180fff; /* 0x06180100; */ |
| 168 | ddr->sdram_data_init = 0xDEADBEEF; |
| 169 | ddr->sdram_clk_cntl = 0x03800000; |
| 170 | ddr->sdram_cfg_2 = 0x04400010; |
| 171 | |
| 172 | #if defined(CONFIG_DDR_ECC) |
| 173 | ddr->err_int_en = 0x0000000d; |
| 174 | ddr->err_disable = 0x00000000; |
| 175 | ddr->err_sbe = 0x00010000; |
| 176 | #endif |
| 177 | asm("sync;isync"); |
| 178 | |
| 179 | udelay(500); |
| 180 | |
| 181 | ddr->sdram_cfg_1 = 0xc3000000; /* 0xe3008000;*/ |
| 182 | |
| 183 | |
| 184 | #if defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) |
| 185 | d_init = 1; |
| 186 | debug("DDR - 1st controller: memory initializing\n"); |
| 187 | /* |
| 188 | * Poll until memory is initialized. |
| 189 | * 512 Meg at 400 might hit this 200 times or so. |
| 190 | */ |
| 191 | while ((ddr->sdram_cfg_2 & (d_init << 4)) != 0) |
| 192 | udelay(1000); |
| 193 | |
| 194 | debug("DDR: memory initialized\n\n"); |
| 195 | asm("sync; isync"); |
| 196 | udelay(500); |
| 197 | #endif |
| 198 | |
| 199 | return 512 * 1024 * 1024; |
| 200 | #endif |
| 201 | return CFG_SDRAM_SIZE * 1024 * 1024; |
| 202 | } |
| 203 | |
| 204 | #endif |
| 205 | |
| 206 | #if defined(CONFIG_PCI) |
| 207 | /* |
| 208 | * Initialize PCI Devices, report devices found. |
| 209 | */ |
| 210 | |
| 211 | #ifndef CONFIG_PCI_PNP |
| 212 | static struct pci_config_table pci_fsl86xxads_config_table[] = { |
| 213 | {PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, |
| 214 | PCI_IDSEL_NUMBER, PCI_ANY_ID, |
| 215 | pci_cfgfunc_config_device, {PCI_ENET0_IOADDR, |
| 216 | PCI_ENET0_MEMADDR, |
| 217 | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER} }, |
| 218 | {} |
| 219 | }; |
| 220 | #endif |
| 221 | |
| 222 | |
| 223 | static struct pci_controller pci1_hose = { |
| 224 | #ifndef CONFIG_PCI_PNP |
| 225 | config_table:pci_mpc86xxcts_config_table |
| 226 | #endif |
| 227 | }; |
| 228 | #endif /* CONFIG_PCI */ |
| 229 | |
| 230 | #ifdef CONFIG_PCIE1 |
| 231 | static struct pci_controller pcie1_hose; |
| 232 | #endif |
| 233 | |
| 234 | #ifdef CONFIG_PCIE2 |
| 235 | static struct pci_controller pcie2_hose; |
| 236 | #endif |
| 237 | |
| 238 | int first_free_busno = 0; |
| 239 | |
| 240 | void pci_init_board(void) |
| 241 | { |
| 242 | volatile immap_t *immap = (immap_t *) CFG_CCSRBAR; |
| 243 | volatile ccsr_gur_t *gur = &immap->im_gur; |
| 244 | uint devdisr = gur->devdisr; |
| 245 | uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19; |
| 246 | uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16; |
| 247 | |
| 248 | printf( " pci_init_board: devdisr=%x, io_sel=%x, host_agent=%x\n", |
| 249 | devdisr, io_sel, host_agent); |
| 250 | |
| 251 | |
| 252 | #ifdef CONFIG_PCIE1 |
| 253 | { |
| 254 | volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE1_ADDR; |
| 255 | extern void fsl_pci_init(struct pci_controller *hose); |
| 256 | struct pci_controller *hose = &pcie1_hose; |
| 257 | int pcie_configured = (io_sel == 1) || (io_sel == 4); |
| 258 | int pcie_ep = (host_agent == 0) || (host_agent == 2) || |
| 259 | (host_agent == 5); |
| 260 | |
| 261 | if (pcie_configured && !(devdisr & MPC86xx_DEVDISR_PCIE1)) { |
| 262 | printf(" PCIe 1 connected to Uli as %s (base address %x)\n", |
| 263 | pcie_ep ? "End Point" : "Root Complex", |
| 264 | (uint)pci); |
| 265 | if (pci->pme_msg_det) |
| 266 | pci->pme_msg_det = 0xffffffff; |
| 267 | |
| 268 | /* inbound */ |
| 269 | pci_set_region(hose->regions + 0, |
| 270 | CFG_PCI_MEMORY_BUS, |
| 271 | CFG_PCI_MEMORY_PHYS, |
| 272 | CFG_PCI_MEMORY_SIZE, |
| 273 | PCI_REGION_MEM | PCI_REGION_MEMORY); |
| 274 | |
| 275 | /* outbound memory */ |
| 276 | pci_set_region(hose->regions + 1, |
| 277 | CFG_PCIE1_MEM_BASE, |
| 278 | CFG_PCIE1_MEM_PHYS, |
| 279 | CFG_PCIE1_MEM_SIZE, |
| 280 | PCI_REGION_MEM); |
| 281 | |
| 282 | /* outbound io */ |
| 283 | pci_set_region(hose->regions + 2, |
| 284 | CFG_PCIE1_IO_BASE, |
| 285 | CFG_PCIE1_IO_PHYS, |
| 286 | CFG_PCIE1_IO_SIZE, |
| 287 | PCI_REGION_IO); |
| 288 | |
| 289 | hose->region_count = 3; |
| 290 | |
| 291 | hose->first_busno = first_free_busno; |
| 292 | pci_setup_indirect(hose, (int)&pci->cfg_addr, |
| 293 | (int)&pci->cfg_data); |
| 294 | |
| 295 | fsl_pci_init(hose); |
| 296 | |
| 297 | first_free_busno = hose->last_busno + 1; |
| 298 | printf(" PCI-Express 1 on bus %02x - %02x\n", |
| 299 | hose->first_busno, hose->last_busno); |
| 300 | |
| 301 | } else |
| 302 | puts(" PCI-Express 1: Disabled\n"); |
| 303 | } |
| 304 | #else |
| 305 | puts("PCI-Express 1: Disabled\n"); |
| 306 | #endif /* CONFIG_PCIE1 */ |
| 307 | |
| 308 | |
| 309 | #ifdef CONFIG_PCIE2 |
| 310 | { |
| 311 | volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE2_ADDR; |
| 312 | extern void fsl_pci_init(struct pci_controller *hose); |
| 313 | struct pci_controller *hose = &pcie2_hose; |
| 314 | |
| 315 | int pcie_configured = (io_sel == 0) || (io_sel == 4); |
| 316 | int pcie_ep = (host_agent == 0) || (host_agent == 1) || |
| 317 | (host_agent == 4); |
| 318 | |
| 319 | if (pcie_configured && !(devdisr & MPC86xx_DEVDISR_PCIE2)) { |
| 320 | printf(" PCI-Express 2 connected to slot as %s" \ |
| 321 | " (base address %x)\n", |
| 322 | pcie_ep ? "End Point" : "Root Complex", |
| 323 | (uint)pci); |
| 324 | if (pci->pme_msg_det) |
| 325 | pci->pme_msg_det = 0xffffffff; |
| 326 | |
| 327 | /* inbound */ |
| 328 | pci_set_region(hose->regions + 0, |
| 329 | CFG_PCI_MEMORY_BUS, |
| 330 | CFG_PCI_MEMORY_PHYS, |
| 331 | CFG_PCI_MEMORY_SIZE, |
| 332 | PCI_REGION_MEM | PCI_REGION_MEMORY); |
| 333 | |
| 334 | /* outbound memory */ |
| 335 | pci_set_region(hose->regions + 1, |
| 336 | CFG_PCIE2_MEM_BASE, |
| 337 | CFG_PCIE2_MEM_PHYS, |
| 338 | CFG_PCIE2_MEM_SIZE, |
| 339 | PCI_REGION_MEM); |
| 340 | |
| 341 | /* outbound io */ |
| 342 | pci_set_region(hose->regions + 2, |
| 343 | CFG_PCIE2_IO_BASE, |
| 344 | CFG_PCIE2_IO_PHYS, |
| 345 | CFG_PCIE2_IO_SIZE, |
| 346 | PCI_REGION_IO); |
| 347 | |
| 348 | hose->region_count = 3; |
| 349 | |
| 350 | hose->first_busno = first_free_busno; |
| 351 | pci_setup_indirect(hose, (int)&pci->cfg_addr, |
| 352 | (int)&pci->cfg_data); |
| 353 | |
| 354 | fsl_pci_init(hose); |
| 355 | |
| 356 | first_free_busno = hose->last_busno + 1; |
| 357 | printf(" PCI-Express 2 on bus %02x - %02x\n", |
| 358 | hose->first_busno, hose->last_busno); |
| 359 | } else |
| 360 | puts(" PCI-Express 2: Disabled\n"); |
| 361 | } |
| 362 | #else |
| 363 | puts("PCI-Express 2: Disabled\n"); |
| 364 | #endif /* CONFIG_PCIE2 */ |
| 365 | |
| 366 | |
| 367 | #ifdef CONFIG_PCI1 |
| 368 | { |
| 369 | volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI1_ADDR; |
| 370 | extern void fsl_pci_init(struct pci_controller *hose); |
| 371 | struct pci_controller *hose = &pci1_hose; |
| 372 | int pci_agent = (host_agent >= 4) && (host_agent <= 6); |
| 373 | |
| 374 | if ( !(devdisr & MPC86xx_DEVDISR_PCI1)) { |
| 375 | printf(" PCI connected to PCI slots as %s" \ |
| 376 | " (base address %x)\n", |
| 377 | pci_agent ? "Agent" : "Host", |
| 378 | (uint)pci); |
| 379 | |
| 380 | /* inbound */ |
| 381 | pci_set_region(hose->regions + 0, |
| 382 | CFG_PCI_MEMORY_BUS, |
| 383 | CFG_PCI_MEMORY_PHYS, |
| 384 | CFG_PCI_MEMORY_SIZE, |
| 385 | PCI_REGION_MEM | PCI_REGION_MEMORY); |
| 386 | |
| 387 | /* outbound memory */ |
| 388 | pci_set_region(hose->regions + 1, |
| 389 | CFG_PCI1_MEM_BASE, |
| 390 | CFG_PCI1_MEM_PHYS, |
| 391 | CFG_PCI1_MEM_SIZE, |
| 392 | PCI_REGION_MEM); |
| 393 | |
| 394 | /* outbound io */ |
| 395 | pci_set_region(hose->regions + 2, |
| 396 | CFG_PCI1_IO_BASE, |
| 397 | CFG_PCI1_IO_PHYS, |
| 398 | CFG_PCI1_IO_SIZE, |
| 399 | PCI_REGION_IO); |
| 400 | |
| 401 | hose->region_count = 3; |
| 402 | |
| 403 | hose->first_busno = first_free_busno; |
| 404 | pci_setup_indirect(hose, (int) &pci->cfg_addr, |
| 405 | (int) &pci->cfg_data); |
| 406 | |
| 407 | fsl_pci_init(hose); |
| 408 | |
| 409 | first_free_busno = hose->last_busno + 1; |
| 410 | printf(" PCI on bus %02x - %02x\n", |
| 411 | hose->first_busno, hose->last_busno); |
| 412 | |
| 413 | |
| 414 | } else |
| 415 | puts(" PCI: Disabled\n"); |
| 416 | } |
| 417 | #endif /* CONFIG_PCI1 */ |
| 418 | } |
| 419 | |
| 420 | #if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) |
| 421 | void |
| 422 | ft_board_setup(void *blob, bd_t *bd) |
| 423 | { |
| 424 | u32 *p; |
| 425 | int len; |
| 426 | |
| 427 | ft_cpu_setup(blob, bd); |
| 428 | |
| 429 | p = ft_get_prop(blob, "/memory/reg", &len); |
| 430 | if (p != NULL) { |
| 431 | *p++ = cpu_to_be32(bd->bi_memstart); |
| 432 | *p = cpu_to_be32(bd->bi_memsize); |
| 433 | } |
| 434 | |
| 435 | #ifdef CONFIG_PCI1 |
| 436 | p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8000/bus-range", &len); |
| 437 | if (p != NULL) { |
| 438 | p[0] = 0; |
| 439 | p[1] = pci1_hose.last_busno - pci1_hose.first_busno; |
| 440 | debug("pci@8000 first_busno=%d last_busno=%d\n",p[0],p[1]); |
| 441 | } |
| 442 | #endif |
| 443 | #ifdef CONFIG_PCIE1 |
| 444 | p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pcie@a000/bus-range", &len); |
| 445 | if (p != NULL) { |
| 446 | p[0] = 0; |
| 447 | p[1] = pcie1_hose.last_busno - pcie1_hose.first_busno; |
| 448 | debug("pcie@9000 first_busno=%d last_busno=%d\n",p[0],p[1]); |
| 449 | } |
| 450 | #endif |
| 451 | #ifdef CONFIG_PCIE2 |
| 452 | p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pcie@9000/bus-range", &len); |
| 453 | if (p != NULL) { |
| 454 | p[0] = 0; |
| 455 | p[1] = pcie2_hose.last_busno - pcie2_hose.first_busno; |
| 456 | debug("pcie@9000 first_busno=%d last_busno=%d\n",p[0],p[1]); |
| 457 | } |
| 458 | #endif |
| 459 | |
| 460 | } |
| 461 | #endif |
| 462 | |
| 463 | /* |
| 464 | * get_board_sys_clk |
| 465 | * Reads the FPGA on board for CONFIG_SYS_CLK_FREQ |
| 466 | */ |
| 467 | |
| 468 | unsigned long |
| 469 | get_board_sys_clk(ulong dummy) |
| 470 | { |
| 471 | u8 i, go_bit, rd_clks; |
| 472 | ulong val = 0; |
| 473 | ulong a; |
| 474 | |
| 475 | a = PIXIS_BASE + PIXIS_SPD; |
| 476 | i = in8(a); |
| 477 | i &= 0x07; |
| 478 | |
| 479 | switch (i) { |
| 480 | case 0: |
| 481 | val = 33333000; |
| 482 | break; |
| 483 | case 1: |
| 484 | val = 39999600; |
| 485 | break; |
| 486 | case 2: |
| 487 | val = 49999500; |
| 488 | break; |
| 489 | case 3: |
| 490 | val = 66666000; |
| 491 | break; |
| 492 | case 4: |
| 493 | val = 83332500; |
| 494 | break; |
| 495 | case 5: |
| 496 | val = 99999000; |
| 497 | break; |
| 498 | case 6: |
| 499 | val = 133332000; |
| 500 | break; |
| 501 | case 7: |
| 502 | val = 166665000; |
| 503 | break; |
| 504 | } |
| 505 | |
| 506 | return val; |
| 507 | } |