blob: 40ec0308c866de7328c9cb80df3593387e42724f [file] [log] [blame]
Ajay Bhargav3405e322011-08-04 21:26:02 +05301/*
2 * (C) Copyright 2011
3 * eInfochips Ltd. <www.einfochips.com>
4 * Written-by: Ajay Bhargav <ajay.bhargav@einfochips.com>
5 *
6 * Based on Aspenite:
7 * (C) Copyright 2010
8 * Marvell Semiconductor <www.marvell.com>
9 * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
10 * Contributor: Mahavir Jain <mjain@marvell.com>
11 *
Wolfgang Denkd79de1d2013-07-08 09:37:19 +020012 * SPDX-License-Identifier: GPL-2.0+
Ajay Bhargav3405e322011-08-04 21:26:02 +053013 */
14
15#ifndef __CONFIG_GPLUGD_H
16#define __CONFIG_GPLUGD_H
17
18/*
Ajay Bhargavd88b2e92011-10-31 17:27:46 +053019 * FIXME: fix for error caused due to recent update to mach-types.h
20 */
21#include <asm/mach-types.h>
22#ifdef MACH_TYPE_SHEEVAD
23#error "MACH_TYPE_SHEEVAD has been defined properly, please remove this."
24#else
25#define MACH_TYPE_SHEEVAD 2625
26#endif
27
28/*
Ajay Bhargav3405e322011-08-04 21:26:02 +053029 * Version number information
30 */
31#define CONFIG_IDENT_STRING "\nMarvell-gplugD"
32
33/*
34 * High Level Configuration Options
35 */
36#define CONFIG_SHEEVA_88SV331xV5 1 /* CPU Core subversion */
37#define CONFIG_ARMADA100 1 /* SOC Family Name */
38#define CONFIG_ARMADA168 1 /* SOC Used on this Board */
Ajay Bhargavd88b2e92011-10-31 17:27:46 +053039#define CONFIG_MACH_TYPE MACH_TYPE_SHEEVAD /* Machine type */
Ajay Bhargav3405e322011-08-04 21:26:02 +053040#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
41
42#define CONFIG_SYS_TEXT_BASE 0x00f00000
43
44/*
45 * There is no internal RAM in ARMADA100, using DRAM
46 * TBD: dcache to be used for this
47 */
48#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE - 0x00200000)
49#define CONFIG_NR_DRAM_BANKS_MAX 2
50
51/*
52 * Commands configuration
53 */
54#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
Ajay Bhargav8ed2bcb2011-09-13 22:22:04 +053055
56/* Disable DCACHE */
57#define CONFIG_SYS_DCACHE_OFF
58
59/* Network configuration */
60#ifdef CONFIG_CMD_NET
Ajay Bhargav8ed2bcb2011-09-13 22:22:04 +053061#define CONFIG_ARMADA100_FEC
62
63/* DHCP Support */
Ajay Bhargav8ed2bcb2011-09-13 22:22:04 +053064#define CONFIG_BOOTP_DHCP_REQUEST_DELAY 50000
65#endif /* CONFIG_CMD_NET */
Ajay Bhargav3405e322011-08-04 21:26:02 +053066
Ajay Bhargav8246ae02011-09-13 22:22:13 +053067/* GPIO Support */
68#define CONFIG_MARVELL_GPIO
69
70/* PHY configuration */
71#define CONFIG_MII
Ajay Bhargav8246ae02011-09-13 22:22:13 +053072#define CONFIG_RESET_PHY_R
73/* 88E3015 register definition */
74#define PHY_LED_PAR_SEL_REG 22
75#define PHY_LED_MAN_REG 25
76#define PHY_LED_VAL 0x5b /* LINK LED1, ACT LED2 */
77/* GPIO Configuration for PHY */
78#define CONFIG_SYS_GPIO_PHY_RST 104 /* GPIO104 */
79
Ajay Bhargavfc960ab2011-10-03 14:00:57 +053080/* SPI Support */
81#define CONFIG_ARMADA100_SPI
82#define CONFIG_ENV_SPI_CS 110
83#define CONFIG_SYS_SSP_PORT 2
84
Ajay Bhargav8bddd842011-10-03 14:00:58 +053085/* Flash Support */
Ajay Bhargav8bddd842011-10-03 14:00:58 +053086
Ajay Bhargav3405e322011-08-04 21:26:02 +053087/*
88 * mv-common.h should be defined after CMD configs since it used them
89 * to enable certain macros
90 */
91#include "mv-common.h"
92#undef CONFIG_ARCH_MISC_INIT
93
94#ifdef CONFIG_SYS_NS16550_COM1
95#undef CONFIG_SYS_NS16550_COM1
96#endif /* CONFIG_SYS_NS16550_COM1 */
97
98#define CONFIG_SYS_NS16550_COM1 ARMD1_UART3_BASE
99
100/*
101 * Environment variables configurations
102 */
Ajay Bhargavcc6880a2011-10-03 14:00:58 +0530103#define CONFIG_ENV_IS_IN_SPI_FLASH
104#define CONFIG_ENV_SECT_SIZE 0x4000
105#define CONFIG_ENV_SIZE 0x4000
106#define CONFIG_ENV_OFFSET 0x07C000
107
Ajay Bhargavfc49f272012-02-13 03:27:44 +0000108#ifdef CONFIG_CMD_USB
109#define CONFIG_USB_EHCI
110#define CONFIG_USB_EHCI_ARMADA100
111#define CONFIG_EHCI_IS_TDI
112#define CONFIG_USB_STORAGE
113#endif /* CONFIG_CMD_USB */
114
115#define CONFIG_DOS_PARTITION
116#define CONFIG_ISO_PARTITION
117#define CONFIG_SUPPORT_VFAT
118
Ajay Bhargav3405e322011-08-04 21:26:02 +0530119#endif /* __CONFIG_GPLUGD_H */