blob: 809005e2899a0f731ccc903778cbabb3192f50e2 [file] [log] [blame]
David Purdy415d07e2012-03-27 16:01:09 +00001/*
2 * Copyright (C) 2012
3 * David Purdy <david.c.purdy@gmail.com>
4 *
5 * Based on Kirkwood support:
6 * (C) Copyright 2009
7 * Marvell Semiconductor <www.marvell.com>
8 * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
9 *
Wolfgang Denkd79de1d2013-07-08 09:37:19 +020010 * SPDX-License-Identifier: GPL-2.0+
David Purdy415d07e2012-03-27 16:01:09 +000011 */
12
13#ifndef _CONFIG_POGO_E02_H
14#define _CONFIG_POGO_E02_H
15
16/*
17 * Machine type definition and ID
18 */
David Purdy415d07e2012-03-27 16:01:09 +000019#define CONFIG_MACH_TYPE MACH_TYPE_POGO_E02
David Purdy415d07e2012-03-27 16:01:09 +000020
21/*
22 * High Level Configuration Options (easy to change)
23 */
24#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
David Purdy415d07e2012-03-27 16:01:09 +000025#define CONFIG_KW88F6281 /* SOC Name */
26#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
27
28/*
29 * Commands configuration
30 */
David Purdy415d07e2012-03-27 16:01:09 +000031#define CONFIG_SYS_MVFS
David Purdy415d07e2012-03-27 16:01:09 +000032
33/*
34 * mv-common.h should be defined after CMD configs since it used them
35 * to enable certain macros
36 */
37#include "mv-common.h"
38
David Purdy415d07e2012-03-27 16:01:09 +000039/*
40 * Environment variables configurations
41 */
42#ifdef CONFIG_CMD_NAND
David Purdy415d07e2012-03-27 16:01:09 +000043#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */
David Purdy415d07e2012-03-27 16:01:09 +000044#endif
45
46#define CONFIG_ENV_SIZE 0x20000 /* 128k */
47#define CONFIG_ENV_OFFSET 0x60000 /* env starts here */
48
49/*
50 * Default environment variables
51 */
52#define CONFIG_BOOTCOMMAND \
53 "setenv bootargs $(bootargs_console); " \
54 "run bootcmd_usb; " \
55 "bootm 0x00800000 0x01100000"
56
57#define CONFIG_EXTRA_ENV_SETTINGS \
58 "mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage)," \
59 "32M(rootfs),-(data)\0"\
60 "mtdids=nand0=orion_nand\0"\
61 "bootargs_console=console=ttyS0,115200\0" \
62 "bootcmd_usb=usb start; ext2load usb 0:1 0x00800000 /uImage; " \
63 "ext2load usb 0:1 0x01100000 /uInitrd\0"
64
65/*
66 * Ethernet Driver configuration
67 */
68#ifdef CONFIG_CMD_NET
69#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
70#define CONFIG_PHY_BASE_ADR 0
71#endif /* CONFIG_CMD_NET */
72
73/*
74 * File system
75 */
David Purdy415d07e2012-03-27 16:01:09 +000076#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
77#define CONFIG_MTD_PARTITIONS
David Purdy415d07e2012-03-27 16:01:09 +000078
79#endif /* _CONFIG_POGO_E02_H */