| York Sun | e12abcb | 2015-03-20 19:28:24 -0700 | [diff] [blame] | 1 | Overview |
| 2 | -------- |
| Prabhakar Kushwaha | 122bcfd | 2015-11-09 16:42:07 +0530 | [diff] [blame] | 3 | The LS2080A Reference Design (RDB) is a high-performance computing, |
| 4 | evaluation, and development platform that supports the QorIQ LS2080A |
| York Sun | e12abcb | 2015-03-20 19:28:24 -0700 | [diff] [blame] | 5 | Layerscape Architecture processor. |
| 6 | |
| Prabhakar Kushwaha | 122bcfd | 2015-11-09 16:42:07 +0530 | [diff] [blame] | 7 | LS2080A SoC Overview |
| Prabhakar Kushwaha | 46c5198 | 2016-06-03 18:41:30 +0530 | [diff] [blame] | 8 | -------------------- |
| 9 | Please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc for LS2080A |
| 10 | SoC overview. |
| York Sun | e12abcb | 2015-03-20 19:28:24 -0700 | [diff] [blame] | 11 | |
| Prabhakar Kushwaha | 122bcfd | 2015-11-09 16:42:07 +0530 | [diff] [blame] | 12 | LS2080ARDB board Overview |
| York Sun | e12abcb | 2015-03-20 19:28:24 -0700 | [diff] [blame] | 13 | ----------------------- |
| 14 | - SERDES Connections, 16 lanes supporting: |
| 15 | - PCI Express - 3.0 |
| 16 | - SATA 3.0 |
| 17 | - XFI |
| 18 | - DDR Controller |
| 19 | - Two ports of 72-bits (8-bits ECC) DDR4. Each port supports four |
| 20 | chip-selects and two DIMM connectors. Support is up to 2133MT/s. |
| 21 | - One port of 40-bits (8-bits ECC) DDR4 which supports four chip-selects |
| 22 | and two DIMM connectors. Support is up to 1600MT/s. |
| 23 | -IFC/Local Bus |
| 24 | - IFC rev. 2.0 implementation supporting Little Endian connection scheme. |
| 25 | - 128 MB NOR flash 16-bit data bus |
| 26 | - One 2 GB NAND flash with ECC support |
| 27 | - CPLD connection |
| 28 | - USB 3.0 |
| 29 | - Two high speed USB 3.0 ports |
| 30 | - First USB 3.0 port configured as Host with Type-A connector |
| 31 | - Second USB 3.0 port configured as OTG with micro-AB connector |
| 32 | - SDHC adapter |
| 33 | - SD Card Rev 2.0 and Rev 3.0 |
| 34 | - DSPI |
| 35 | - 128 MB high-speed flash Memory for boot code and storage (up to 108MHz) |
| 36 | - 4 I2C controllers |
| 37 | - Two SATA onboard connectors |
| 38 | - UART |
| 39 | - ARM JTAG support |
| 40 | |
| 41 | Memory map from core's view |
| 42 | ---------------------------- |
| 43 | 0x00_0000_0000 .. 0x00_000F_FFFF Boot Rom |
| 44 | 0x00_0100_0000 .. 0x00_0FFF_FFFF CCSR |
| 45 | 0x00_1800_0000 .. 0x00_181F_FFFF OCRAM |
| 46 | 0x00_3000_0000 .. 0x00_3FFF_FFFF IFC region #1 |
| 47 | 0x00_8000_0000 .. 0x00_FFFF_FFFF DDR region #1 |
| 48 | 0x05_1000_0000 .. 0x05_FFFF_FFFF IFC region #2 |
| 49 | 0x80_8000_0000 .. 0xFF_FFFF_FFFF DDR region #2 |
| 50 | |
| Bin Meng | 7557405 | 2016-02-05 19:30:11 -0800 | [diff] [blame] | 51 | Other addresses are either reserved, or not used directly by U-Boot. |
| York Sun | e12abcb | 2015-03-20 19:28:24 -0700 | [diff] [blame] | 52 | This list should be updated when more addresses are used. |
| 53 | |
| 54 | IFC region map from core's view |
| 55 | ------------------------------- |
| 56 | During boot i.e. IFC Region #1:- |
| 57 | 0x30000000 - 0x37ffffff : 128MB : NOR flash |
| 58 | 0x3C000000 - 0x40000000 : 64MB : CPLD |
| 59 | |
| 60 | After relocate to DDR i.e. IFC Region #2:- |
| 61 | 0x5_1000_0000..0x5_1fff_ffff Memory Hole |
| 62 | 0x5_2000_0000..0x5_3fff_ffff IFC CSx (CPLD, NAND and others 512MB) |
| 63 | 0x5_4000_0000..0x5_7fff_ffff ASIC or others 1GB |
| 64 | 0x5_8000_0000..0x5_bfff_ffff IFC CS0 1GB (NOR/Promjet) |
| 65 | 0x5_C000_0000..0x5_ffff_ffff IFC CS1 1GB (NOR/Promjet) |
| 66 | |
| 67 | Booting Options |
| 68 | --------------- |
| 69 | a) NOR boot |
| 70 | b) NAND boot |
| Bhupesh Sharma | 0b10a1a | 2015-05-28 14:54:10 +0530 | [diff] [blame] | 71 | |
| 72 | Booting Linux flavors which do not support 48-bit VA (< Linux 3.18) |
| 73 | ------------------------------------------------------------------- |
| 74 | One needs to use appropriate bootargs to boot Linux flavors which do |
| 75 | not support 48-bit VA (for e.g. < Linux 3.18) by appending mem=2048M, as shown |
| 76 | below: |
| 77 | |
| 78 | => setenv bootargs 'console=ttyS1,115200 root=/dev/ram |
| 79 | earlycon=uart8250,mmio,0x21c0600,115200 default_hugepagesz=2m hugepagesz=2m |
| 80 | hugepages=16 mem=2048M' |
| 81 | |