Peng Fan | d4487ba | 2019-09-16 03:09:52 +0000 | [diff] [blame] | 1 | // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 | /* |
| 3 | * Copyright 2019 NXP |
| 4 | */ |
| 5 | |
| 6 | #include <dt-bindings/clock/imx8mn-clock.h> |
Marek Vasut | ff5c8cd | 2021-04-10 00:16:06 +0200 | [diff] [blame] | 7 | #include <dt-bindings/power/imx8mn-power.h> |
| 8 | #include <dt-bindings/reset/imx8mq-reset.h> |
Peng Fan | d4487ba | 2019-09-16 03:09:52 +0000 | [diff] [blame] | 9 | #include <dt-bindings/gpio/gpio.h> |
| 10 | #include <dt-bindings/input/input.h> |
| 11 | #include <dt-bindings/interrupt-controller/arm-gic.h> |
Peng Fan | cdc90f3 | 2020-12-27 09:37:06 +0800 | [diff] [blame] | 12 | #include <dt-bindings/thermal/thermal.h> |
Peng Fan | d4487ba | 2019-09-16 03:09:52 +0000 | [diff] [blame] | 13 | |
| 14 | #include "imx8mn-pinfunc.h" |
| 15 | |
| 16 | / { |
Peng Fan | d4487ba | 2019-09-16 03:09:52 +0000 | [diff] [blame] | 17 | interrupt-parent = <&gic>; |
| 18 | #address-cells = <2>; |
| 19 | #size-cells = <2>; |
| 20 | |
| 21 | aliases { |
| 22 | ethernet0 = &fec1; |
| 23 | gpio0 = &gpio1; |
| 24 | gpio1 = &gpio2; |
| 25 | gpio2 = &gpio3; |
| 26 | gpio3 = &gpio4; |
| 27 | gpio4 = &gpio5; |
| 28 | i2c0 = &i2c1; |
| 29 | i2c1 = &i2c2; |
| 30 | i2c2 = &i2c3; |
| 31 | i2c3 = &i2c4; |
| 32 | mmc0 = &usdhc1; |
| 33 | mmc1 = &usdhc2; |
| 34 | mmc2 = &usdhc3; |
| 35 | serial0 = &uart1; |
| 36 | serial1 = &uart2; |
| 37 | serial2 = &uart3; |
| 38 | serial3 = &uart4; |
| 39 | spi0 = &ecspi1; |
| 40 | spi1 = &ecspi2; |
| 41 | spi2 = &ecspi3; |
| 42 | }; |
| 43 | |
| 44 | cpus { |
| 45 | #address-cells = <1>; |
| 46 | #size-cells = <0>; |
| 47 | |
Peng Fan | cdc90f3 | 2020-12-27 09:37:06 +0800 | [diff] [blame] | 48 | idle-states { |
| 49 | entry-method = "psci"; |
| 50 | |
| 51 | cpu_pd_wait: cpu-pd-wait { |
| 52 | compatible = "arm,idle-state"; |
| 53 | arm,psci-suspend-param = <0x0010033>; |
| 54 | local-timer-stop; |
| 55 | entry-latency-us = <1000>; |
| 56 | exit-latency-us = <700>; |
| 57 | min-residency-us = <2700>; |
| 58 | }; |
| 59 | }; |
| 60 | |
Peng Fan | d4487ba | 2019-09-16 03:09:52 +0000 | [diff] [blame] | 61 | A53_0: cpu@0 { |
| 62 | device_type = "cpu"; |
| 63 | compatible = "arm,cortex-a53"; |
| 64 | reg = <0x0>; |
| 65 | clock-latency = <61036>; |
| 66 | clocks = <&clk IMX8MN_CLK_ARM>; |
| 67 | enable-method = "psci"; |
| 68 | next-level-cache = <&A53_L2>; |
Peng Fan | cdc90f3 | 2020-12-27 09:37:06 +0800 | [diff] [blame] | 69 | operating-points-v2 = <&a53_opp_table>; |
| 70 | nvmem-cells = <&cpu_speed_grade>; |
| 71 | nvmem-cell-names = "speed_grade"; |
| 72 | cpu-idle-states = <&cpu_pd_wait>; |
| 73 | #cooling-cells = <2>; |
Peng Fan | d4487ba | 2019-09-16 03:09:52 +0000 | [diff] [blame] | 74 | }; |
| 75 | |
| 76 | A53_1: cpu@1 { |
| 77 | device_type = "cpu"; |
| 78 | compatible = "arm,cortex-a53"; |
| 79 | reg = <0x1>; |
| 80 | clock-latency = <61036>; |
| 81 | clocks = <&clk IMX8MN_CLK_ARM>; |
| 82 | enable-method = "psci"; |
| 83 | next-level-cache = <&A53_L2>; |
Peng Fan | cdc90f3 | 2020-12-27 09:37:06 +0800 | [diff] [blame] | 84 | operating-points-v2 = <&a53_opp_table>; |
| 85 | cpu-idle-states = <&cpu_pd_wait>; |
| 86 | #cooling-cells = <2>; |
Peng Fan | d4487ba | 2019-09-16 03:09:52 +0000 | [diff] [blame] | 87 | }; |
| 88 | |
| 89 | A53_2: cpu@2 { |
| 90 | device_type = "cpu"; |
| 91 | compatible = "arm,cortex-a53"; |
| 92 | reg = <0x2>; |
| 93 | clock-latency = <61036>; |
| 94 | clocks = <&clk IMX8MN_CLK_ARM>; |
| 95 | enable-method = "psci"; |
| 96 | next-level-cache = <&A53_L2>; |
Peng Fan | cdc90f3 | 2020-12-27 09:37:06 +0800 | [diff] [blame] | 97 | operating-points-v2 = <&a53_opp_table>; |
| 98 | cpu-idle-states = <&cpu_pd_wait>; |
| 99 | #cooling-cells = <2>; |
Peng Fan | d4487ba | 2019-09-16 03:09:52 +0000 | [diff] [blame] | 100 | }; |
| 101 | |
| 102 | A53_3: cpu@3 { |
| 103 | device_type = "cpu"; |
| 104 | compatible = "arm,cortex-a53"; |
| 105 | reg = <0x3>; |
| 106 | clock-latency = <61036>; |
| 107 | clocks = <&clk IMX8MN_CLK_ARM>; |
| 108 | enable-method = "psci"; |
| 109 | next-level-cache = <&A53_L2>; |
Peng Fan | cdc90f3 | 2020-12-27 09:37:06 +0800 | [diff] [blame] | 110 | operating-points-v2 = <&a53_opp_table>; |
| 111 | cpu-idle-states = <&cpu_pd_wait>; |
| 112 | #cooling-cells = <2>; |
Peng Fan | d4487ba | 2019-09-16 03:09:52 +0000 | [diff] [blame] | 113 | }; |
| 114 | |
| 115 | A53_L2: l2-cache0 { |
| 116 | compatible = "cache"; |
| 117 | }; |
| 118 | }; |
| 119 | |
Peng Fan | cdc90f3 | 2020-12-27 09:37:06 +0800 | [diff] [blame] | 120 | a53_opp_table: opp-table { |
| 121 | compatible = "operating-points-v2"; |
| 122 | opp-shared; |
| 123 | |
| 124 | opp-1200000000 { |
| 125 | opp-hz = /bits/ 64 <1200000000>; |
| 126 | opp-microvolt = <850000>; |
| 127 | opp-supported-hw = <0xb00>, <0x7>; |
| 128 | clock-latency-ns = <150000>; |
| 129 | opp-suspend; |
| 130 | }; |
| 131 | |
| 132 | opp-1400000000 { |
| 133 | opp-hz = /bits/ 64 <1400000000>; |
| 134 | opp-microvolt = <950000>; |
| 135 | opp-supported-hw = <0x300>, <0x7>; |
| 136 | clock-latency-ns = <150000>; |
| 137 | opp-suspend; |
| 138 | }; |
| 139 | |
| 140 | opp-1500000000 { |
| 141 | opp-hz = /bits/ 64 <1500000000>; |
| 142 | opp-microvolt = <1000000>; |
| 143 | opp-supported-hw = <0x100>, <0x3>; |
| 144 | clock-latency-ns = <150000>; |
| 145 | opp-suspend; |
| 146 | }; |
Peng Fan | d4487ba | 2019-09-16 03:09:52 +0000 | [diff] [blame] | 147 | }; |
| 148 | |
| 149 | osc_32k: clock-osc-32k { |
| 150 | compatible = "fixed-clock"; |
| 151 | #clock-cells = <0>; |
| 152 | clock-frequency = <32768>; |
| 153 | clock-output-names = "osc_32k"; |
| 154 | }; |
| 155 | |
| 156 | osc_24m: clock-osc-24m { |
| 157 | compatible = "fixed-clock"; |
| 158 | #clock-cells = <0>; |
| 159 | clock-frequency = <24000000>; |
| 160 | clock-output-names = "osc_24m"; |
| 161 | }; |
| 162 | |
| 163 | clk_ext1: clock-ext1 { |
| 164 | compatible = "fixed-clock"; |
| 165 | #clock-cells = <0>; |
| 166 | clock-frequency = <133000000>; |
| 167 | clock-output-names = "clk_ext1"; |
| 168 | }; |
| 169 | |
| 170 | clk_ext2: clock-ext2 { |
| 171 | compatible = "fixed-clock"; |
| 172 | #clock-cells = <0>; |
| 173 | clock-frequency = <133000000>; |
| 174 | clock-output-names = "clk_ext2"; |
| 175 | }; |
| 176 | |
| 177 | clk_ext3: clock-ext3 { |
| 178 | compatible = "fixed-clock"; |
| 179 | #clock-cells = <0>; |
| 180 | clock-frequency = <133000000>; |
| 181 | clock-output-names = "clk_ext3"; |
| 182 | }; |
| 183 | |
| 184 | clk_ext4: clock-ext4 { |
| 185 | compatible = "fixed-clock"; |
| 186 | #clock-cells = <0>; |
| 187 | clock-frequency= <133000000>; |
| 188 | clock-output-names = "clk_ext4"; |
| 189 | }; |
| 190 | |
Peng Fan | cdc90f3 | 2020-12-27 09:37:06 +0800 | [diff] [blame] | 191 | pmu { |
| 192 | compatible = "arm,cortex-a53-pmu"; |
| 193 | interrupts = <GIC_PPI 7 |
| 194 | (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; |
| 195 | interrupt-affinity = <&A53_0>, <&A53_1>, <&A53_2>, <&A53_3>; |
| 196 | }; |
| 197 | |
Peng Fan | d4487ba | 2019-09-16 03:09:52 +0000 | [diff] [blame] | 198 | psci { |
| 199 | compatible = "arm,psci-1.0"; |
| 200 | method = "smc"; |
| 201 | }; |
| 202 | |
Peng Fan | cdc90f3 | 2020-12-27 09:37:06 +0800 | [diff] [blame] | 203 | thermal-zones { |
| 204 | cpu-thermal { |
| 205 | polling-delay-passive = <250>; |
| 206 | polling-delay = <2000>; |
| 207 | thermal-sensors = <&tmu>; |
| 208 | trips { |
| 209 | cpu_alert0: trip0 { |
| 210 | temperature = <85000>; |
| 211 | hysteresis = <2000>; |
| 212 | type = "passive"; |
| 213 | }; |
| 214 | |
| 215 | cpu_crit0: trip1 { |
| 216 | temperature = <95000>; |
| 217 | hysteresis = <2000>; |
| 218 | type = "critical"; |
| 219 | }; |
| 220 | }; |
| 221 | |
| 222 | cooling-maps { |
| 223 | map0 { |
| 224 | trip = <&cpu_alert0>; |
| 225 | cooling-device = |
| 226 | <&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 227 | <&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 228 | <&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 229 | <&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| 230 | }; |
| 231 | }; |
| 232 | }; |
| 233 | }; |
| 234 | |
Peng Fan | d4487ba | 2019-09-16 03:09:52 +0000 | [diff] [blame] | 235 | timer { |
| 236 | compatible = "arm,armv8-timer"; |
Peng Fan | cdc90f3 | 2020-12-27 09:37:06 +0800 | [diff] [blame] | 237 | interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| 238 | <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| 239 | <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| 240 | <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; |
Peng Fan | d4487ba | 2019-09-16 03:09:52 +0000 | [diff] [blame] | 241 | clock-frequency = <8000000>; |
| 242 | arm,no-tick-in-suspend; |
| 243 | }; |
| 244 | |
| 245 | soc@0 { |
Adam Ford | 5d07ffe | 2021-04-02 22:17:17 -0500 | [diff] [blame] | 246 | compatible = "fsl,imx8mn-soc", "simple-bus"; |
Peng Fan | d4487ba | 2019-09-16 03:09:52 +0000 | [diff] [blame] | 247 | #address-cells = <1>; |
| 248 | #size-cells = <1>; |
| 249 | ranges = <0x0 0x0 0x0 0x3e000000>; |
Adam Ford | 5d07ffe | 2021-04-02 22:17:17 -0500 | [diff] [blame] | 250 | nvmem-cells = <&imx8mn_uid>; |
| 251 | nvmem-cell-names = "soc_unique_id"; |
Peng Fan | d4487ba | 2019-09-16 03:09:52 +0000 | [diff] [blame] | 252 | |
| 253 | aips1: bus@30000000 { |
| 254 | compatible = "fsl,aips-bus", "simple-bus"; |
| 255 | reg = <0x30000000 0x400000>; |
| 256 | #address-cells = <1>; |
| 257 | #size-cells = <1>; |
| 258 | ranges; |
| 259 | |
Adam Ford | 5d07ffe | 2021-04-02 22:17:17 -0500 | [diff] [blame] | 260 | spba: spba-bus@30000000 { |
Peng Fan | cdc90f3 | 2020-12-27 09:37:06 +0800 | [diff] [blame] | 261 | compatible = "fsl,spba-bus", "simple-bus"; |
| 262 | #address-cells = <1>; |
| 263 | #size-cells = <1>; |
| 264 | reg = <0x30000000 0x100000>; |
| 265 | ranges; |
| 266 | |
| 267 | sai2: sai@30020000 { |
| 268 | compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; |
| 269 | reg = <0x30020000 0x10000>; |
| 270 | interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; |
| 271 | clocks = <&clk IMX8MN_CLK_SAI2_IPG>, |
| 272 | <&clk IMX8MN_CLK_DUMMY>, |
| 273 | <&clk IMX8MN_CLK_SAI2_ROOT>, |
| 274 | <&clk IMX8MN_CLK_DUMMY>, <&clk IMX8MN_CLK_DUMMY>; |
| 275 | clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; |
| 276 | dmas = <&sdma2 2 2 0>, <&sdma2 3 2 0>; |
| 277 | dma-names = "rx", "tx"; |
| 278 | status = "disabled"; |
| 279 | }; |
| 280 | |
| 281 | sai3: sai@30030000 { |
| 282 | compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; |
| 283 | reg = <0x30030000 0x10000>; |
| 284 | interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; |
| 285 | clocks = <&clk IMX8MN_CLK_SAI3_IPG>, |
| 286 | <&clk IMX8MN_CLK_DUMMY>, |
| 287 | <&clk IMX8MN_CLK_SAI3_ROOT>, |
| 288 | <&clk IMX8MN_CLK_DUMMY>, <&clk IMX8MN_CLK_DUMMY>; |
| 289 | clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; |
| 290 | dmas = <&sdma2 4 2 0>, <&sdma2 5 2 0>; |
| 291 | dma-names = "rx", "tx"; |
| 292 | status = "disabled"; |
| 293 | }; |
| 294 | |
| 295 | sai5: sai@30050000 { |
| 296 | compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; |
| 297 | reg = <0x30050000 0x10000>; |
| 298 | interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; |
| 299 | clocks = <&clk IMX8MN_CLK_SAI5_IPG>, |
| 300 | <&clk IMX8MN_CLK_DUMMY>, |
| 301 | <&clk IMX8MN_CLK_SAI5_ROOT>, |
| 302 | <&clk IMX8MN_CLK_DUMMY>, <&clk IMX8MN_CLK_DUMMY>; |
| 303 | clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; |
| 304 | dmas = <&sdma2 8 2 0>, <&sdma2 9 2 0>; |
| 305 | dma-names = "rx", "tx"; |
| 306 | fsl,shared-interrupt; |
| 307 | fsl,dataline = <0 0xf 0xf>; |
| 308 | status = "disabled"; |
| 309 | }; |
| 310 | |
| 311 | sai6: sai@30060000 { |
| 312 | compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; |
| 313 | reg = <0x30060000 0x10000>; |
| 314 | interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; |
| 315 | clocks = <&clk IMX8MN_CLK_SAI6_IPG>, |
| 316 | <&clk IMX8MN_CLK_DUMMY>, |
| 317 | <&clk IMX8MN_CLK_SAI6_ROOT>, |
| 318 | <&clk IMX8MN_CLK_DUMMY>, <&clk IMX8MN_CLK_DUMMY>; |
| 319 | clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; |
| 320 | dmas = <&sdma2 10 2 0>, <&sdma2 11 2 0>; |
| 321 | dma-names = "rx", "tx"; |
| 322 | status = "disabled"; |
| 323 | }; |
| 324 | |
| 325 | micfil: audio-controller@30080000 { |
| 326 | compatible = "fsl,imx8mm-micfil"; |
| 327 | reg = <0x30080000 0x10000>; |
| 328 | interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, |
| 329 | <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, |
| 330 | <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, |
| 331 | <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; |
| 332 | clocks = <&clk IMX8MN_CLK_PDM_IPG>, |
| 333 | <&clk IMX8MN_CLK_PDM_ROOT>, |
| 334 | <&clk IMX8MN_AUDIO_PLL1_OUT>, |
| 335 | <&clk IMX8MN_AUDIO_PLL2_OUT>, |
| 336 | <&clk IMX8MN_CLK_EXT3>; |
| 337 | clock-names = "ipg_clk", "ipg_clk_app", |
| 338 | "pll8k", "pll11k", "clkext3"; |
| 339 | dmas = <&sdma2 24 25 0x80000000>; |
| 340 | dma-names = "rx"; |
| 341 | status = "disabled"; |
| 342 | }; |
| 343 | |
| 344 | spdif1: spdif@30090000 { |
| 345 | compatible = "fsl,imx35-spdif"; |
| 346 | reg = <0x30090000 0x10000>; |
| 347 | interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; |
| 348 | clocks = <&clk IMX8MN_CLK_AUDIO_AHB>, /* core */ |
| 349 | <&clk IMX8MN_CLK_24M>, /* rxtx0 */ |
| 350 | <&clk IMX8MN_CLK_SPDIF1>, /* rxtx1 */ |
| 351 | <&clk IMX8MN_CLK_DUMMY>, /* rxtx2 */ |
| 352 | <&clk IMX8MN_CLK_DUMMY>, /* rxtx3 */ |
| 353 | <&clk IMX8MN_CLK_DUMMY>, /* rxtx4 */ |
| 354 | <&clk IMX8MN_CLK_AUDIO_AHB>, /* rxtx5 */ |
| 355 | <&clk IMX8MN_CLK_DUMMY>, /* rxtx6 */ |
| 356 | <&clk IMX8MN_CLK_DUMMY>, /* rxtx7 */ |
| 357 | <&clk IMX8MN_CLK_DUMMY>; /* spba */ |
| 358 | clock-names = "core", "rxtx0", |
| 359 | "rxtx1", "rxtx2", |
| 360 | "rxtx3", "rxtx4", |
| 361 | "rxtx5", "rxtx6", |
| 362 | "rxtx7", "spba"; |
| 363 | dmas = <&sdma2 28 18 0>, <&sdma2 29 18 0>; |
| 364 | dma-names = "rx", "tx"; |
| 365 | status = "disabled"; |
| 366 | }; |
| 367 | |
| 368 | sai7: sai@300b0000 { |
| 369 | compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; |
| 370 | reg = <0x300b0000 0x10000>; |
| 371 | interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; |
| 372 | clocks = <&clk IMX8MN_CLK_SAI7_IPG>, |
| 373 | <&clk IMX8MN_CLK_DUMMY>, |
| 374 | <&clk IMX8MN_CLK_SAI7_ROOT>, |
| 375 | <&clk IMX8MN_CLK_DUMMY>, <&clk IMX8MN_CLK_DUMMY>; |
| 376 | clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; |
| 377 | dmas = <&sdma2 12 2 0>, <&sdma2 13 2 0>; |
| 378 | dma-names = "rx", "tx"; |
| 379 | status = "disabled"; |
| 380 | }; |
| 381 | |
| 382 | easrc: easrc@300c0000 { |
| 383 | compatible = "fsl,imx8mn-easrc"; |
| 384 | reg = <0x300c0000 0x10000>; |
| 385 | interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; |
| 386 | clocks = <&clk IMX8MN_CLK_ASRC_ROOT>; |
| 387 | clock-names = "mem"; |
| 388 | dmas = <&sdma2 16 23 0> , <&sdma2 17 23 0>, |
| 389 | <&sdma2 18 23 0> , <&sdma2 19 23 0>, |
| 390 | <&sdma2 20 23 0> , <&sdma2 21 23 0>, |
| 391 | <&sdma2 22 23 0> , <&sdma2 23 23 0>; |
| 392 | dma-names = "ctx0_rx", "ctx0_tx", |
| 393 | "ctx1_rx", "ctx1_tx", |
| 394 | "ctx2_rx", "ctx2_tx", |
| 395 | "ctx3_rx", "ctx3_tx"; |
| 396 | firmware-name = "imx/easrc/easrc-imx8mn.bin"; |
| 397 | fsl,asrc-rate = <8000>; |
| 398 | fsl,asrc-format = <2>; |
| 399 | status = "disabled"; |
| 400 | }; |
| 401 | }; |
| 402 | |
Peng Fan | d4487ba | 2019-09-16 03:09:52 +0000 | [diff] [blame] | 403 | gpio1: gpio@30200000 { |
| 404 | compatible = "fsl,imx8mn-gpio", "fsl,imx35-gpio"; |
| 405 | reg = <0x30200000 0x10000>; |
| 406 | interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, |
| 407 | <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; |
| 408 | clocks = <&clk IMX8MN_CLK_GPIO1_ROOT>; |
| 409 | gpio-controller; |
| 410 | #gpio-cells = <2>; |
| 411 | interrupt-controller; |
| 412 | #interrupt-cells = <2>; |
Peng Fan | cdc90f3 | 2020-12-27 09:37:06 +0800 | [diff] [blame] | 413 | gpio-ranges = <&iomuxc 0 10 30>; |
Peng Fan | d4487ba | 2019-09-16 03:09:52 +0000 | [diff] [blame] | 414 | }; |
| 415 | |
| 416 | gpio2: gpio@30210000 { |
| 417 | compatible = "fsl,imx8mn-gpio", "fsl,imx35-gpio"; |
| 418 | reg = <0x30210000 0x10000>; |
| 419 | interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, |
| 420 | <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; |
| 421 | clocks = <&clk IMX8MN_CLK_GPIO2_ROOT>; |
| 422 | gpio-controller; |
| 423 | #gpio-cells = <2>; |
| 424 | interrupt-controller; |
| 425 | #interrupt-cells = <2>; |
Peng Fan | cdc90f3 | 2020-12-27 09:37:06 +0800 | [diff] [blame] | 426 | gpio-ranges = <&iomuxc 0 40 21>; |
Peng Fan | d4487ba | 2019-09-16 03:09:52 +0000 | [diff] [blame] | 427 | }; |
| 428 | |
| 429 | gpio3: gpio@30220000 { |
| 430 | compatible = "fsl,imx8mn-gpio", "fsl,imx35-gpio"; |
| 431 | reg = <0x30220000 0x10000>; |
| 432 | interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, |
| 433 | <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; |
| 434 | clocks = <&clk IMX8MN_CLK_GPIO3_ROOT>; |
| 435 | gpio-controller; |
| 436 | #gpio-cells = <2>; |
| 437 | interrupt-controller; |
| 438 | #interrupt-cells = <2>; |
Peng Fan | cdc90f3 | 2020-12-27 09:37:06 +0800 | [diff] [blame] | 439 | gpio-ranges = <&iomuxc 0 61 26>; |
Peng Fan | d4487ba | 2019-09-16 03:09:52 +0000 | [diff] [blame] | 440 | }; |
| 441 | |
| 442 | gpio4: gpio@30230000 { |
| 443 | compatible = "fsl,imx8mn-gpio", "fsl,imx35-gpio"; |
| 444 | reg = <0x30230000 0x10000>; |
| 445 | interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, |
| 446 | <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; |
| 447 | clocks = <&clk IMX8MN_CLK_GPIO4_ROOT>; |
| 448 | gpio-controller; |
| 449 | #gpio-cells = <2>; |
| 450 | interrupt-controller; |
| 451 | #interrupt-cells = <2>; |
Peng Fan | cdc90f3 | 2020-12-27 09:37:06 +0800 | [diff] [blame] | 452 | gpio-ranges = <&iomuxc 21 108 11>; |
Peng Fan | d4487ba | 2019-09-16 03:09:52 +0000 | [diff] [blame] | 453 | }; |
| 454 | |
| 455 | gpio5: gpio@30240000 { |
| 456 | compatible = "fsl,imx8mn-gpio", "fsl,imx35-gpio"; |
| 457 | reg = <0x30240000 0x10000>; |
| 458 | interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, |
| 459 | <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; |
| 460 | clocks = <&clk IMX8MN_CLK_GPIO5_ROOT>; |
| 461 | gpio-controller; |
| 462 | #gpio-cells = <2>; |
| 463 | interrupt-controller; |
| 464 | #interrupt-cells = <2>; |
Peng Fan | cdc90f3 | 2020-12-27 09:37:06 +0800 | [diff] [blame] | 465 | gpio-ranges = <&iomuxc 0 119 30>; |
| 466 | }; |
| 467 | |
| 468 | tmu: tmu@30260000 { |
| 469 | compatible = "fsl,imx8mn-tmu", "fsl,imx8mm-tmu"; |
| 470 | reg = <0x30260000 0x10000>; |
| 471 | clocks = <&clk IMX8MN_CLK_TMU_ROOT>; |
| 472 | #thermal-sensor-cells = <0>; |
Peng Fan | d4487ba | 2019-09-16 03:09:52 +0000 | [diff] [blame] | 473 | }; |
| 474 | |
| 475 | wdog1: watchdog@30280000 { |
| 476 | compatible = "fsl,imx8mn-wdt", "fsl,imx21-wdt"; |
| 477 | reg = <0x30280000 0x10000>; |
| 478 | interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; |
| 479 | clocks = <&clk IMX8MN_CLK_WDOG1_ROOT>; |
| 480 | status = "disabled"; |
| 481 | }; |
| 482 | |
| 483 | wdog2: watchdog@30290000 { |
| 484 | compatible = "fsl,imx8mn-wdt", "fsl,imx21-wdt"; |
| 485 | reg = <0x30290000 0x10000>; |
| 486 | interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; |
| 487 | clocks = <&clk IMX8MN_CLK_WDOG2_ROOT>; |
| 488 | status = "disabled"; |
| 489 | }; |
| 490 | |
| 491 | wdog3: watchdog@302a0000 { |
| 492 | compatible = "fsl,imx8mn-wdt", "fsl,imx21-wdt"; |
| 493 | reg = <0x302a0000 0x10000>; |
| 494 | interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; |
| 495 | clocks = <&clk IMX8MN_CLK_WDOG3_ROOT>; |
| 496 | status = "disabled"; |
| 497 | }; |
| 498 | |
| 499 | sdma3: dma-controller@302b0000 { |
Peng Fan | cdc90f3 | 2020-12-27 09:37:06 +0800 | [diff] [blame] | 500 | compatible = "fsl,imx8mn-sdma", "fsl,imx8mq-sdma"; |
Peng Fan | d4487ba | 2019-09-16 03:09:52 +0000 | [diff] [blame] | 501 | reg = <0x302b0000 0x10000>; |
| 502 | interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; |
| 503 | clocks = <&clk IMX8MN_CLK_SDMA3_ROOT>, |
| 504 | <&clk IMX8MN_CLK_SDMA3_ROOT>; |
| 505 | clock-names = "ipg", "ahb"; |
| 506 | #dma-cells = <3>; |
| 507 | fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; |
| 508 | }; |
| 509 | |
| 510 | sdma2: dma-controller@302c0000 { |
Peng Fan | cdc90f3 | 2020-12-27 09:37:06 +0800 | [diff] [blame] | 511 | compatible = "fsl,imx8mn-sdma", "fsl,imx8mq-sdma"; |
Peng Fan | d4487ba | 2019-09-16 03:09:52 +0000 | [diff] [blame] | 512 | reg = <0x302c0000 0x10000>; |
| 513 | interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; |
| 514 | clocks = <&clk IMX8MN_CLK_SDMA2_ROOT>, |
| 515 | <&clk IMX8MN_CLK_SDMA2_ROOT>; |
| 516 | clock-names = "ipg", "ahb"; |
| 517 | #dma-cells = <3>; |
| 518 | fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; |
| 519 | }; |
| 520 | |
| 521 | iomuxc: pinctrl@30330000 { |
| 522 | compatible = "fsl,imx8mn-iomuxc"; |
| 523 | reg = <0x30330000 0x10000>; |
| 524 | }; |
| 525 | |
| 526 | gpr: iomuxc-gpr@30340000 { |
| 527 | compatible = "fsl,imx8mn-iomuxc-gpr", "syscon"; |
| 528 | reg = <0x30340000 0x10000>; |
| 529 | }; |
| 530 | |
Peng Fan | cdc90f3 | 2020-12-27 09:37:06 +0800 | [diff] [blame] | 531 | ocotp: efuse@30350000 { |
| 532 | compatible = "fsl,imx8mn-ocotp", "fsl,imx8mm-ocotp", "syscon"; |
Peng Fan | d4487ba | 2019-09-16 03:09:52 +0000 | [diff] [blame] | 533 | reg = <0x30350000 0x10000>; |
| 534 | clocks = <&clk IMX8MN_CLK_OCOTP_ROOT>; |
Peng Fan | cdc90f3 | 2020-12-27 09:37:06 +0800 | [diff] [blame] | 535 | #address-cells = <1>; |
| 536 | #size-cells = <1>; |
| 537 | |
Adam Ford | 5d07ffe | 2021-04-02 22:17:17 -0500 | [diff] [blame] | 538 | imx8mn_uid: unique-id@410 { |
| 539 | reg = <0x4 0x8>; |
| 540 | }; |
| 541 | |
Peng Fan | cdc90f3 | 2020-12-27 09:37:06 +0800 | [diff] [blame] | 542 | cpu_speed_grade: speed-grade@10 { |
| 543 | reg = <0x10 4>; |
| 544 | }; |
Adam Ford | 5d07ffe | 2021-04-02 22:17:17 -0500 | [diff] [blame] | 545 | |
| 546 | fec_mac_address: mac-address@90 { |
| 547 | reg = <0x90 6>; |
| 548 | }; |
Peng Fan | d4487ba | 2019-09-16 03:09:52 +0000 | [diff] [blame] | 549 | }; |
| 550 | |
| 551 | anatop: anatop@30360000 { |
| 552 | compatible = "fsl,imx8mn-anatop", "fsl,imx8mm-anatop", |
Peng Fan | cdc90f3 | 2020-12-27 09:37:06 +0800 | [diff] [blame] | 553 | "syscon"; |
Peng Fan | d4487ba | 2019-09-16 03:09:52 +0000 | [diff] [blame] | 554 | reg = <0x30360000 0x10000>; |
| 555 | }; |
| 556 | |
| 557 | snvs: snvs@30370000 { |
| 558 | compatible = "fsl,sec-v4.0-mon","syscon", "simple-mfd"; |
| 559 | reg = <0x30370000 0x10000>; |
| 560 | |
| 561 | snvs_rtc: snvs-rtc-lp { |
| 562 | compatible = "fsl,sec-v4.0-mon-rtc-lp"; |
| 563 | regmap = <&snvs>; |
| 564 | offset = <0x34>; |
| 565 | interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, |
| 566 | <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; |
Peng Fan | cdc90f3 | 2020-12-27 09:37:06 +0800 | [diff] [blame] | 567 | clocks = <&clk IMX8MN_CLK_SNVS_ROOT>; |
Peng Fan | d4487ba | 2019-09-16 03:09:52 +0000 | [diff] [blame] | 568 | clock-names = "snvs-rtc"; |
| 569 | }; |
| 570 | |
| 571 | snvs_pwrkey: snvs-powerkey { |
| 572 | compatible = "fsl,sec-v4.0-pwrkey"; |
| 573 | regmap = <&snvs>; |
| 574 | interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; |
Peng Fan | cdc90f3 | 2020-12-27 09:37:06 +0800 | [diff] [blame] | 575 | clocks = <&clk IMX8MN_CLK_SNVS_ROOT>; |
| 576 | clock-names = "snvs-pwrkey"; |
Peng Fan | d4487ba | 2019-09-16 03:09:52 +0000 | [diff] [blame] | 577 | linux,keycode = <KEY_POWER>; |
| 578 | wakeup-source; |
| 579 | status = "disabled"; |
| 580 | }; |
| 581 | }; |
| 582 | |
| 583 | clk: clock-controller@30380000 { |
| 584 | compatible = "fsl,imx8mn-ccm"; |
| 585 | reg = <0x30380000 0x10000>; |
| 586 | #clock-cells = <1>; |
| 587 | clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>, |
| 588 | <&clk_ext3>, <&clk_ext4>; |
| 589 | clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2", |
| 590 | "clk_ext3", "clk_ext4"; |
Peng Fan | cdc90f3 | 2020-12-27 09:37:06 +0800 | [diff] [blame] | 591 | assigned-clocks = <&clk IMX8MN_CLK_A53_SRC>, |
| 592 | <&clk IMX8MN_CLK_A53_CORE>, |
| 593 | <&clk IMX8MN_CLK_NOC>, |
| 594 | <&clk IMX8MN_CLK_AUDIO_AHB>, |
| 595 | <&clk IMX8MN_CLK_IPG_AUDIO_ROOT>, |
Adam Ford | 5d07ffe | 2021-04-02 22:17:17 -0500 | [diff] [blame] | 596 | <&clk IMX8MN_SYS_PLL3>, |
| 597 | <&clk IMX8MN_AUDIO_PLL1>, |
| 598 | <&clk IMX8MN_AUDIO_PLL2>; |
Peng Fan | cdc90f3 | 2020-12-27 09:37:06 +0800 | [diff] [blame] | 599 | assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_800M>, |
| 600 | <&clk IMX8MN_ARM_PLL_OUT>, |
| 601 | <&clk IMX8MN_SYS_PLL3_OUT>, |
| 602 | <&clk IMX8MN_SYS_PLL1_800M>; |
| 603 | assigned-clock-rates = <0>, <0>, <0>, |
| 604 | <400000000>, |
| 605 | <400000000>, |
Adam Ford | 5d07ffe | 2021-04-02 22:17:17 -0500 | [diff] [blame] | 606 | <600000000>, |
| 607 | <393216000>, |
| 608 | <361267200>; |
Peng Fan | d4487ba | 2019-09-16 03:09:52 +0000 | [diff] [blame] | 609 | }; |
| 610 | |
| 611 | src: reset-controller@30390000 { |
Peng Fan | cdc90f3 | 2020-12-27 09:37:06 +0800 | [diff] [blame] | 612 | compatible = "fsl,imx8mn-src", "fsl,imx8mq-src", "syscon"; |
Peng Fan | d4487ba | 2019-09-16 03:09:52 +0000 | [diff] [blame] | 613 | reg = <0x30390000 0x10000>; |
| 614 | interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; |
| 615 | #reset-cells = <1>; |
| 616 | }; |
Marek Vasut | ff5c8cd | 2021-04-10 00:16:06 +0200 | [diff] [blame] | 617 | |
| 618 | gpc: gpc@303a0000 { |
| 619 | compatible = "fsl,imx8mn-gpc"; |
| 620 | reg = <0x303a0000 0x10000>; |
| 621 | interrupt-parent = <&gic>; |
| 622 | interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; |
| 623 | |
| 624 | pgc { |
| 625 | #address-cells = <1>; |
| 626 | #size-cells = <0>; |
| 627 | |
| 628 | pgc_hsiomix: power-domain@0 { |
| 629 | #power-domain-cells = <0>; |
| 630 | reg = <IMX8MN_POWER_DOMAIN_HSIOMIX>; |
| 631 | clocks = <&clk IMX8MN_CLK_USB_BUS>; |
| 632 | }; |
| 633 | |
| 634 | pgc_otg1: power-domain@1 { |
| 635 | #power-domain-cells = <0>; |
| 636 | reg = <IMX8MN_POWER_DOMAIN_OTG1>; |
| 637 | power-domains = <&pgc_hsiomix>; |
| 638 | }; |
| 639 | |
| 640 | pgc_gpumix: power-domain@2 { |
| 641 | #power-domain-cells = <0>; |
| 642 | reg = <IMX8MN_POWER_DOMAIN_GPUMIX>; |
| 643 | clocks = <&clk IMX8MN_CLK_GPU_CORE_ROOT>, |
| 644 | <&clk IMX8MN_CLK_GPU_SHADER_DIV>, |
| 645 | <&clk IMX8MN_CLK_GPU_BUS_ROOT>, |
| 646 | <&clk IMX8MN_CLK_GPU_AHB>; |
| 647 | resets = <&src IMX8MQ_RESET_GPU_RESET>; |
| 648 | }; |
| 649 | |
| 650 | dispmix_pd: power-domain@3 { |
| 651 | #power-domain-cells = <0>; |
| 652 | reg = <IMX8MN_POWER_DOMAIN_DISPMIX>; |
| 653 | clocks = <&clk IMX8MN_CLK_DISP_PIXEL_ROOT>, |
| 654 | <&clk IMX8MN_CLK_DISP_AXI_ROOT>, |
| 655 | <&clk IMX8MN_CLK_DISP_APB_ROOT>; |
| 656 | }; |
| 657 | |
| 658 | mipi_pd: power-domain@4 { |
| 659 | #power-domain-cells = <0>; |
| 660 | reg = <IMX8MN_POWER_DOMAIN_MIPI>; |
| 661 | power-domains = <&dispmix_pd>; |
| 662 | }; |
| 663 | }; |
| 664 | }; |
Peng Fan | d4487ba | 2019-09-16 03:09:52 +0000 | [diff] [blame] | 665 | }; |
| 666 | |
| 667 | aips2: bus@30400000 { |
| 668 | compatible = "fsl,aips-bus", "simple-bus"; |
| 669 | reg = <0x30400000 0x400000>; |
| 670 | #address-cells = <1>; |
| 671 | #size-cells = <1>; |
| 672 | ranges; |
| 673 | |
| 674 | pwm1: pwm@30660000 { |
| 675 | compatible = "fsl,imx8mn-pwm", "fsl,imx27-pwm"; |
| 676 | reg = <0x30660000 0x10000>; |
| 677 | interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; |
| 678 | clocks = <&clk IMX8MN_CLK_PWM1_ROOT>, |
| 679 | <&clk IMX8MN_CLK_PWM1_ROOT>; |
| 680 | clock-names = "ipg", "per"; |
| 681 | #pwm-cells = <2>; |
| 682 | status = "disabled"; |
| 683 | }; |
| 684 | |
| 685 | pwm2: pwm@30670000 { |
| 686 | compatible = "fsl,imx8mn-pwm", "fsl,imx27-pwm"; |
| 687 | reg = <0x30670000 0x10000>; |
| 688 | interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; |
| 689 | clocks = <&clk IMX8MN_CLK_PWM2_ROOT>, |
| 690 | <&clk IMX8MN_CLK_PWM2_ROOT>; |
| 691 | clock-names = "ipg", "per"; |
| 692 | #pwm-cells = <2>; |
| 693 | status = "disabled"; |
| 694 | }; |
| 695 | |
| 696 | pwm3: pwm@30680000 { |
| 697 | compatible = "fsl,imx8mn-pwm", "fsl,imx27-pwm"; |
| 698 | reg = <0x30680000 0x10000>; |
| 699 | interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; |
| 700 | clocks = <&clk IMX8MN_CLK_PWM3_ROOT>, |
| 701 | <&clk IMX8MN_CLK_PWM3_ROOT>; |
| 702 | clock-names = "ipg", "per"; |
| 703 | #pwm-cells = <2>; |
| 704 | status = "disabled"; |
| 705 | }; |
| 706 | |
| 707 | pwm4: pwm@30690000 { |
| 708 | compatible = "fsl,imx8mn-pwm", "fsl,imx27-pwm"; |
| 709 | reg = <0x30690000 0x10000>; |
| 710 | interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; |
| 711 | clocks = <&clk IMX8MN_CLK_PWM4_ROOT>, |
| 712 | <&clk IMX8MN_CLK_PWM4_ROOT>; |
| 713 | clock-names = "ipg", "per"; |
| 714 | #pwm-cells = <2>; |
| 715 | status = "disabled"; |
| 716 | }; |
Peng Fan | cdc90f3 | 2020-12-27 09:37:06 +0800 | [diff] [blame] | 717 | |
| 718 | system_counter: timer@306a0000 { |
| 719 | compatible = "nxp,sysctr-timer"; |
| 720 | reg = <0x306a0000 0x20000>; |
| 721 | interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; |
| 722 | clocks = <&osc_24m>; |
| 723 | clock-names = "per"; |
| 724 | }; |
Peng Fan | d4487ba | 2019-09-16 03:09:52 +0000 | [diff] [blame] | 725 | }; |
| 726 | |
| 727 | aips3: bus@30800000 { |
| 728 | compatible = "fsl,aips-bus", "simple-bus"; |
| 729 | reg = <0x30800000 0x400000>; |
| 730 | #address-cells = <1>; |
| 731 | #size-cells = <1>; |
| 732 | ranges; |
| 733 | |
| 734 | ecspi1: spi@30820000 { |
| 735 | compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi"; |
| 736 | #address-cells = <1>; |
| 737 | #size-cells = <0>; |
| 738 | reg = <0x30820000 0x10000>; |
| 739 | interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; |
| 740 | clocks = <&clk IMX8MN_CLK_ECSPI1_ROOT>, |
| 741 | <&clk IMX8MN_CLK_ECSPI1_ROOT>; |
| 742 | clock-names = "ipg", "per"; |
| 743 | dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>; |
| 744 | dma-names = "rx", "tx"; |
| 745 | status = "disabled"; |
| 746 | }; |
| 747 | |
| 748 | ecspi2: spi@30830000 { |
| 749 | compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi"; |
| 750 | #address-cells = <1>; |
| 751 | #size-cells = <0>; |
| 752 | reg = <0x30830000 0x10000>; |
| 753 | interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; |
| 754 | clocks = <&clk IMX8MN_CLK_ECSPI2_ROOT>, |
| 755 | <&clk IMX8MN_CLK_ECSPI2_ROOT>; |
| 756 | clock-names = "ipg", "per"; |
| 757 | dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>; |
| 758 | dma-names = "rx", "tx"; |
| 759 | status = "disabled"; |
| 760 | }; |
| 761 | |
| 762 | ecspi3: spi@30840000 { |
| 763 | compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi"; |
| 764 | #address-cells = <1>; |
| 765 | #size-cells = <0>; |
| 766 | reg = <0x30840000 0x10000>; |
| 767 | interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; |
| 768 | clocks = <&clk IMX8MN_CLK_ECSPI3_ROOT>, |
| 769 | <&clk IMX8MN_CLK_ECSPI3_ROOT>; |
| 770 | clock-names = "ipg", "per"; |
| 771 | dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>; |
| 772 | dma-names = "rx", "tx"; |
| 773 | status = "disabled"; |
| 774 | }; |
| 775 | |
| 776 | uart1: serial@30860000 { |
| 777 | compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart"; |
| 778 | reg = <0x30860000 0x10000>; |
| 779 | interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; |
| 780 | clocks = <&clk IMX8MN_CLK_UART1_ROOT>, |
| 781 | <&clk IMX8MN_CLK_UART1_ROOT>; |
| 782 | clock-names = "ipg", "per"; |
| 783 | dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>; |
| 784 | dma-names = "rx", "tx"; |
| 785 | status = "disabled"; |
| 786 | }; |
| 787 | |
| 788 | uart3: serial@30880000 { |
| 789 | compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart"; |
| 790 | reg = <0x30880000 0x10000>; |
| 791 | interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; |
| 792 | clocks = <&clk IMX8MN_CLK_UART3_ROOT>, |
| 793 | <&clk IMX8MN_CLK_UART3_ROOT>; |
| 794 | clock-names = "ipg", "per"; |
| 795 | dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>; |
| 796 | dma-names = "rx", "tx"; |
| 797 | status = "disabled"; |
| 798 | }; |
| 799 | |
| 800 | uart2: serial@30890000 { |
| 801 | compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart"; |
| 802 | reg = <0x30890000 0x10000>; |
| 803 | interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; |
| 804 | clocks = <&clk IMX8MN_CLK_UART2_ROOT>, |
| 805 | <&clk IMX8MN_CLK_UART2_ROOT>; |
| 806 | clock-names = "ipg", "per"; |
| 807 | status = "disabled"; |
| 808 | }; |
| 809 | |
Peng Fan | cdc90f3 | 2020-12-27 09:37:06 +0800 | [diff] [blame] | 810 | crypto: crypto@30900000 { |
| 811 | compatible = "fsl,sec-v4.0"; |
| 812 | #address-cells = <1>; |
| 813 | #size-cells = <1>; |
| 814 | reg = <0x30900000 0x40000>; |
| 815 | ranges = <0 0x30900000 0x40000>; |
| 816 | interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; |
| 817 | clocks = <&clk IMX8MN_CLK_AHB>, |
| 818 | <&clk IMX8MN_CLK_IPG_ROOT>; |
| 819 | clock-names = "aclk", "ipg"; |
| 820 | |
| 821 | sec_jr0: jr@1000 { |
| 822 | compatible = "fsl,sec-v4.0-job-ring"; |
| 823 | reg = <0x1000 0x1000>; |
| 824 | interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; |
| 825 | }; |
| 826 | |
| 827 | sec_jr1: jr@2000 { |
| 828 | compatible = "fsl,sec-v4.0-job-ring"; |
| 829 | reg = <0x2000 0x1000>; |
| 830 | interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; |
| 831 | }; |
| 832 | |
| 833 | sec_jr2: jr@3000 { |
| 834 | compatible = "fsl,sec-v4.0-job-ring"; |
| 835 | reg = <0x3000 0x1000>; |
| 836 | interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; |
| 837 | }; |
| 838 | }; |
| 839 | |
Peng Fan | d4487ba | 2019-09-16 03:09:52 +0000 | [diff] [blame] | 840 | i2c1: i2c@30a20000 { |
| 841 | compatible = "fsl,imx8mn-i2c", "fsl,imx21-i2c"; |
| 842 | #address-cells = <1>; |
| 843 | #size-cells = <0>; |
| 844 | reg = <0x30a20000 0x10000>; |
| 845 | interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; |
| 846 | clocks = <&clk IMX8MN_CLK_I2C1_ROOT>; |
| 847 | status = "disabled"; |
| 848 | }; |
| 849 | |
| 850 | i2c2: i2c@30a30000 { |
| 851 | compatible = "fsl,imx8mn-i2c", "fsl,imx21-i2c"; |
| 852 | #address-cells = <1>; |
| 853 | #size-cells = <0>; |
| 854 | reg = <0x30a30000 0x10000>; |
| 855 | interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; |
| 856 | clocks = <&clk IMX8MN_CLK_I2C2_ROOT>; |
| 857 | status = "disabled"; |
| 858 | }; |
| 859 | |
| 860 | i2c3: i2c@30a40000 { |
| 861 | #address-cells = <1>; |
| 862 | #size-cells = <0>; |
| 863 | compatible = "fsl,imx8mn-i2c", "fsl,imx21-i2c"; |
| 864 | reg = <0x30a40000 0x10000>; |
| 865 | interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; |
| 866 | clocks = <&clk IMX8MN_CLK_I2C3_ROOT>; |
| 867 | status = "disabled"; |
| 868 | }; |
| 869 | |
| 870 | i2c4: i2c@30a50000 { |
| 871 | compatible = "fsl,imx8mn-i2c", "fsl,imx21-i2c"; |
| 872 | #address-cells = <1>; |
| 873 | #size-cells = <0>; |
| 874 | reg = <0x30a50000 0x10000>; |
| 875 | interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; |
| 876 | clocks = <&clk IMX8MN_CLK_I2C4_ROOT>; |
| 877 | status = "disabled"; |
| 878 | }; |
| 879 | |
| 880 | uart4: serial@30a60000 { |
| 881 | compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart"; |
| 882 | reg = <0x30a60000 0x10000>; |
| 883 | interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; |
| 884 | clocks = <&clk IMX8MN_CLK_UART4_ROOT>, |
| 885 | <&clk IMX8MN_CLK_UART4_ROOT>; |
| 886 | clock-names = "ipg", "per"; |
| 887 | dmas = <&sdma1 28 4 0>, <&sdma1 29 4 0>; |
| 888 | dma-names = "rx", "tx"; |
| 889 | status = "disabled"; |
| 890 | }; |
| 891 | |
Peng Fan | cdc90f3 | 2020-12-27 09:37:06 +0800 | [diff] [blame] | 892 | mu: mailbox@30aa0000 { |
| 893 | compatible = "fsl,imx8mn-mu", "fsl,imx6sx-mu"; |
| 894 | reg = <0x30aa0000 0x10000>; |
| 895 | interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; |
| 896 | clocks = <&clk IMX8MN_CLK_MU_ROOT>; |
| 897 | #mbox-cells = <2>; |
| 898 | }; |
| 899 | |
Peng Fan | d4487ba | 2019-09-16 03:09:52 +0000 | [diff] [blame] | 900 | usdhc1: mmc@30b40000 { |
| 901 | compatible = "fsl,imx8mn-usdhc", "fsl,imx7d-usdhc"; |
| 902 | reg = <0x30b40000 0x10000>; |
| 903 | interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; |
Peng Fan | cdc90f3 | 2020-12-27 09:37:06 +0800 | [diff] [blame] | 904 | clocks = <&clk IMX8MN_CLK_IPG_ROOT>, |
Peng Fan | d4487ba | 2019-09-16 03:09:52 +0000 | [diff] [blame] | 905 | <&clk IMX8MN_CLK_NAND_USDHC_BUS>, |
| 906 | <&clk IMX8MN_CLK_USDHC1_ROOT>; |
| 907 | clock-names = "ipg", "ahb", "per"; |
Peng Fan | d4487ba | 2019-09-16 03:09:52 +0000 | [diff] [blame] | 908 | fsl,tuning-start-tap = <20>; |
| 909 | fsl,tuning-step= <2>; |
| 910 | bus-width = <4>; |
| 911 | status = "disabled"; |
| 912 | }; |
| 913 | |
| 914 | usdhc2: mmc@30b50000 { |
| 915 | compatible = "fsl,imx8mn-usdhc", "fsl,imx7d-usdhc"; |
| 916 | reg = <0x30b50000 0x10000>; |
| 917 | interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; |
Peng Fan | cdc90f3 | 2020-12-27 09:37:06 +0800 | [diff] [blame] | 918 | clocks = <&clk IMX8MN_CLK_IPG_ROOT>, |
Peng Fan | d4487ba | 2019-09-16 03:09:52 +0000 | [diff] [blame] | 919 | <&clk IMX8MN_CLK_NAND_USDHC_BUS>, |
| 920 | <&clk IMX8MN_CLK_USDHC2_ROOT>; |
| 921 | clock-names = "ipg", "ahb", "per"; |
| 922 | fsl,tuning-start-tap = <20>; |
| 923 | fsl,tuning-step= <2>; |
| 924 | bus-width = <4>; |
| 925 | status = "disabled"; |
| 926 | }; |
| 927 | |
| 928 | usdhc3: mmc@30b60000 { |
| 929 | compatible = "fsl,imx8mn-usdhc", "fsl,imx7d-usdhc"; |
| 930 | reg = <0x30b60000 0x10000>; |
| 931 | interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; |
Peng Fan | cdc90f3 | 2020-12-27 09:37:06 +0800 | [diff] [blame] | 932 | clocks = <&clk IMX8MN_CLK_IPG_ROOT>, |
Peng Fan | d4487ba | 2019-09-16 03:09:52 +0000 | [diff] [blame] | 933 | <&clk IMX8MN_CLK_NAND_USDHC_BUS>, |
| 934 | <&clk IMX8MN_CLK_USDHC3_ROOT>; |
| 935 | clock-names = "ipg", "ahb", "per"; |
Peng Fan | d4487ba | 2019-09-16 03:09:52 +0000 | [diff] [blame] | 936 | fsl,tuning-start-tap = <20>; |
| 937 | fsl,tuning-step= <2>; |
| 938 | bus-width = <4>; |
| 939 | status = "disabled"; |
| 940 | }; |
| 941 | |
Adam Ford | 5d07ffe | 2021-04-02 22:17:17 -0500 | [diff] [blame] | 942 | flexspi: spi@30bb0000 { |
| 943 | #address-cells = <1>; |
| 944 | #size-cells = <0>; |
| 945 | compatible = "nxp,imx8mm-fspi"; |
| 946 | reg = <0x30bb0000 0x10000>, <0x8000000 0x10000000>; |
| 947 | reg-names = "fspi_base", "fspi_mmap"; |
| 948 | interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; |
| 949 | clocks = <&clk IMX8MN_CLK_QSPI_ROOT>, |
| 950 | <&clk IMX8MN_CLK_QSPI_ROOT>; |
| 951 | clock-names = "fspi", "fspi_en"; |
| 952 | status = "disabled"; |
| 953 | }; |
| 954 | |
Peng Fan | d4487ba | 2019-09-16 03:09:52 +0000 | [diff] [blame] | 955 | sdma1: dma-controller@30bd0000 { |
Peng Fan | cdc90f3 | 2020-12-27 09:37:06 +0800 | [diff] [blame] | 956 | compatible = "fsl,imx8mn-sdma", "fsl,imx8mq-sdma"; |
Peng Fan | d4487ba | 2019-09-16 03:09:52 +0000 | [diff] [blame] | 957 | reg = <0x30bd0000 0x10000>; |
| 958 | interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; |
| 959 | clocks = <&clk IMX8MN_CLK_SDMA1_ROOT>, |
Peng Fan | cdc90f3 | 2020-12-27 09:37:06 +0800 | [diff] [blame] | 960 | <&clk IMX8MN_CLK_AHB>; |
Peng Fan | d4487ba | 2019-09-16 03:09:52 +0000 | [diff] [blame] | 961 | clock-names = "ipg", "ahb"; |
| 962 | #dma-cells = <3>; |
| 963 | fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; |
| 964 | }; |
| 965 | |
| 966 | fec1: ethernet@30be0000 { |
| 967 | compatible = "fsl,imx8mn-fec", "fsl,imx6sx-fec"; |
| 968 | reg = <0x30be0000 0x10000>; |
| 969 | interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, |
| 970 | <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, |
Peng Fan | cdc90f3 | 2020-12-27 09:37:06 +0800 | [diff] [blame] | 971 | <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, |
| 972 | <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; |
Peng Fan | d4487ba | 2019-09-16 03:09:52 +0000 | [diff] [blame] | 973 | clocks = <&clk IMX8MN_CLK_ENET1_ROOT>, |
| 974 | <&clk IMX8MN_CLK_ENET1_ROOT>, |
| 975 | <&clk IMX8MN_CLK_ENET_TIMER>, |
| 976 | <&clk IMX8MN_CLK_ENET_REF>, |
| 977 | <&clk IMX8MN_CLK_ENET_PHY_REF>; |
| 978 | clock-names = "ipg", "ahb", "ptp", |
| 979 | "enet_clk_ref", "enet_out"; |
| 980 | assigned-clocks = <&clk IMX8MN_CLK_ENET_AXI>, |
| 981 | <&clk IMX8MN_CLK_ENET_TIMER>, |
| 982 | <&clk IMX8MN_CLK_ENET_REF>, |
Adam Ford | 5d07ffe | 2021-04-02 22:17:17 -0500 | [diff] [blame] | 983 | <&clk IMX8MN_CLK_ENET_PHY_REF>; |
Peng Fan | d4487ba | 2019-09-16 03:09:52 +0000 | [diff] [blame] | 984 | assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_266M>, |
| 985 | <&clk IMX8MN_SYS_PLL2_100M>, |
Adam Ford | 5d07ffe | 2021-04-02 22:17:17 -0500 | [diff] [blame] | 986 | <&clk IMX8MN_SYS_PLL2_125M>, |
| 987 | <&clk IMX8MN_SYS_PLL2_50M>; |
| 988 | assigned-clock-rates = <0>, <100000000>, <125000000>, <0>; |
Peng Fan | d4487ba | 2019-09-16 03:09:52 +0000 | [diff] [blame] | 989 | fsl,num-tx-queues = <3>; |
| 990 | fsl,num-rx-queues = <3>; |
Adam Ford | 5d07ffe | 2021-04-02 22:17:17 -0500 | [diff] [blame] | 991 | nvmem-cells = <&fec_mac_address>; |
| 992 | nvmem-cell-names = "mac-address"; |
| 993 | nvmem_macaddr_swap; |
| 994 | fsl,stop-mode = <&gpr 0x10 3>; |
Peng Fan | d4487ba | 2019-09-16 03:09:52 +0000 | [diff] [blame] | 995 | status = "disabled"; |
| 996 | }; |
| 997 | |
| 998 | }; |
| 999 | |
| 1000 | aips4: bus@32c00000 { |
| 1001 | compatible = "fsl,aips-bus", "simple-bus"; |
| 1002 | reg = <0x32c00000 0x400000>; |
| 1003 | #address-cells = <1>; |
| 1004 | #size-cells = <1>; |
| 1005 | ranges; |
| 1006 | |
| 1007 | usbotg1: usb@32e40000 { |
| 1008 | compatible = "fsl,imx8mn-usb", "fsl,imx7d-usb"; |
| 1009 | reg = <0x32e40000 0x200>; |
| 1010 | interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; |
| 1011 | clocks = <&clk IMX8MN_CLK_USB1_CTRL_ROOT>; |
| 1012 | clock-names = "usb1_ctrl_root_clk"; |
Peng Fan | cdc90f3 | 2020-12-27 09:37:06 +0800 | [diff] [blame] | 1013 | assigned-clocks = <&clk IMX8MN_CLK_USB_BUS>; |
| 1014 | assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_500M>; |
Marek Vasut | c5876a8 | 2021-04-10 00:12:03 +0200 | [diff] [blame] | 1015 | phys = <&usbphynop1>; |
Peng Fan | d4487ba | 2019-09-16 03:09:52 +0000 | [diff] [blame] | 1016 | fsl,usbmisc = <&usbmisc1 0>; |
Marek Vasut | ff5c8cd | 2021-04-10 00:16:06 +0200 | [diff] [blame] | 1017 | power-domains = <&pgc_otg1>; |
Peng Fan | d4487ba | 2019-09-16 03:09:52 +0000 | [diff] [blame] | 1018 | status = "disabled"; |
| 1019 | }; |
| 1020 | |
| 1021 | usbmisc1: usbmisc@32e40200 { |
| 1022 | compatible = "fsl,imx8mn-usbmisc", "fsl,imx7d-usbmisc"; |
| 1023 | #index-cells = <1>; |
| 1024 | reg = <0x32e40200 0x200>; |
| 1025 | }; |
Peng Fan | d4487ba | 2019-09-16 03:09:52 +0000 | [diff] [blame] | 1026 | }; |
| 1027 | |
| 1028 | dma_apbh: dma-controller@33000000 { |
| 1029 | compatible = "fsl,imx7d-dma-apbh", "fsl,imx28-dma-apbh"; |
| 1030 | reg = <0x33000000 0x2000>; |
| 1031 | interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, |
| 1032 | <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, |
| 1033 | <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, |
| 1034 | <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; |
| 1035 | interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3"; |
| 1036 | #dma-cells = <1>; |
| 1037 | dma-channels = <4>; |
| 1038 | clocks = <&clk IMX8MN_CLK_NAND_USDHC_BUS_RAWNAND_CLK>; |
| 1039 | }; |
| 1040 | |
| 1041 | gpmi: nand-controller@33002000 { |
| 1042 | compatible = "fsl,imx8mn-gpmi-nand", "fsl,imx7d-gpmi-nand"; |
| 1043 | #address-cells = <1>; |
| 1044 | #size-cells = <1>; |
| 1045 | reg = <0x33002000 0x2000>, <0x33004000 0x4000>; |
| 1046 | reg-names = "gpmi-nand", "bch"; |
| 1047 | interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; |
| 1048 | interrupt-names = "bch"; |
| 1049 | clocks = <&clk IMX8MN_CLK_NAND_ROOT>, |
| 1050 | <&clk IMX8MN_CLK_NAND_USDHC_BUS_RAWNAND_CLK>; |
| 1051 | clock-names = "gpmi_io", "gpmi_bch_apb"; |
| 1052 | dmas = <&dma_apbh 0>; |
| 1053 | dma-names = "rx-tx"; |
| 1054 | status = "disabled"; |
| 1055 | }; |
| 1056 | |
| 1057 | gic: interrupt-controller@38800000 { |
| 1058 | compatible = "arm,gic-v3"; |
| 1059 | reg = <0x38800000 0x10000>, |
| 1060 | <0x38880000 0xc0000>; |
| 1061 | #interrupt-cells = <3>; |
| 1062 | interrupt-controller; |
| 1063 | interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; |
| 1064 | }; |
Peng Fan | d4487ba | 2019-09-16 03:09:52 +0000 | [diff] [blame] | 1065 | |
Peng Fan | cdc90f3 | 2020-12-27 09:37:06 +0800 | [diff] [blame] | 1066 | ddrc: memory-controller@3d400000 { |
| 1067 | compatible = "fsl,imx8mn-ddrc", "fsl,imx8m-ddrc"; |
| 1068 | reg = <0x3d400000 0x400000>; |
| 1069 | clock-names = "core", "pll", "alt", "apb"; |
| 1070 | clocks = <&clk IMX8MN_CLK_DRAM_CORE>, |
| 1071 | <&clk IMX8MN_DRAM_PLL>, |
| 1072 | <&clk IMX8MN_CLK_DRAM_ALT>, |
| 1073 | <&clk IMX8MN_CLK_DRAM_APB>; |
| 1074 | }; |
| 1075 | |
| 1076 | ddr-pmu@3d800000 { |
| 1077 | compatible = "fsl,imx8mn-ddr-pmu", "fsl,imx8m-ddr-pmu"; |
| 1078 | reg = <0x3d800000 0x400000>; |
| 1079 | interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; |
| 1080 | }; |
Peng Fan | d4487ba | 2019-09-16 03:09:52 +0000 | [diff] [blame] | 1081 | }; |
| 1082 | |
Peng Fan | cdc90f3 | 2020-12-27 09:37:06 +0800 | [diff] [blame] | 1083 | usbphynop1: usbphynop1 { |
Marek Vasut | c5876a8 | 2021-04-10 00:12:03 +0200 | [diff] [blame] | 1084 | #phy-cells = <0>; |
Peng Fan | d4487ba | 2019-09-16 03:09:52 +0000 | [diff] [blame] | 1085 | compatible = "usb-nop-xceiv"; |
| 1086 | clocks = <&clk IMX8MN_CLK_USB_PHY_REF>; |
| 1087 | assigned-clocks = <&clk IMX8MN_CLK_USB_PHY_REF>; |
| 1088 | assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_100M>; |
| 1089 | clock-names = "main_clk"; |
| 1090 | }; |
| 1091 | }; |