Tom Rini | 10e4779 | 2018-05-06 17:58:06 -0400 | [diff] [blame] | 1 | /* SPDX-License-Identifier: GPL-2.0+ */ |
Max Krummenacher | 3b74ccf | 2016-11-30 19:43:08 +0100 | [diff] [blame] | 2 | /* |
| 3 | * Copyright 2013-2015 Toradex, Inc. |
| 4 | * |
| 5 | * Configuration settings for the Toradex Apalis iMX6 |
Max Krummenacher | 3b74ccf | 2016-11-30 19:43:08 +0100 | [diff] [blame] | 6 | */ |
| 7 | |
| 8 | #ifndef __CONFIG_H |
| 9 | #define __CONFIG_H |
| 10 | |
| 11 | #include "mx6_common.h" |
Max Krummenacher | 3b74ccf | 2016-11-30 19:43:08 +0100 | [diff] [blame] | 12 | |
| 13 | #undef CONFIG_DISPLAY_BOARDINFO |
Max Krummenacher | 3b74ccf | 2016-11-30 19:43:08 +0100 | [diff] [blame] | 14 | |
| 15 | #define CONFIG_MACH_TYPE 4886 |
| 16 | |
| 17 | #define CONFIG_SYS_GENERIC_BOARD |
| 18 | |
| 19 | #include <asm/arch/imx-regs.h> |
Stefano Babic | 33731bc | 2017-06-29 10:16:06 +0200 | [diff] [blame] | 20 | #include <asm/mach-imx/gpio.h> |
Max Krummenacher | 3b74ccf | 2016-11-30 19:43:08 +0100 | [diff] [blame] | 21 | |
| 22 | #ifdef CONFIG_SPL |
| 23 | #include "imx6_spl.h" |
Max Krummenacher | 3b74ccf | 2016-11-30 19:43:08 +0100 | [diff] [blame] | 24 | #endif |
| 25 | |
| 26 | #define CONFIG_CMDLINE_TAG |
| 27 | #define CONFIG_SETUP_MEMORY_TAGS |
| 28 | #define CONFIG_INITRD_TAG |
| 29 | #define CONFIG_REVISION_TAG |
| 30 | #define CONFIG_SERIAL_TAG |
| 31 | |
| 32 | /* Size of malloc() pool */ |
| 33 | #define CONFIG_SYS_MALLOC_LEN (32 * 1024 * 1024) |
| 34 | |
Max Krummenacher | 3b74ccf | 2016-11-30 19:43:08 +0100 | [diff] [blame] | 35 | #define CONFIG_MISC_INIT_R |
| 36 | |
| 37 | #define CONFIG_MXC_UART |
| 38 | #define CONFIG_MXC_UART_BASE UART1_BASE |
| 39 | |
Max Krummenacher | 3b74ccf | 2016-11-30 19:43:08 +0100 | [diff] [blame] | 40 | /* I2C Configs */ |
| 41 | #define CONFIG_SYS_I2C |
| 42 | #define CONFIG_SYS_I2C_MXC |
| 43 | #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ |
| 44 | #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ |
| 45 | #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ |
| 46 | #define CONFIG_SYS_I2C_SPEED 100000 |
| 47 | |
| 48 | /* OCOTP Configs */ |
Max Krummenacher | 3b74ccf | 2016-11-30 19:43:08 +0100 | [diff] [blame] | 49 | #ifdef CONFIG_CMD_FUSE |
| 50 | #define CONFIG_MXC_OCOTP |
| 51 | #endif |
| 52 | |
| 53 | /* MMC Configs */ |
Max Krummenacher | 3b74ccf | 2016-11-30 19:43:08 +0100 | [diff] [blame] | 54 | #define CONFIG_FSL_USDHC |
| 55 | #define CONFIG_SYS_FSL_ESDHC_ADDR 0 |
| 56 | #define CONFIG_SYS_FSL_USDHC_NUM 3 |
| 57 | |
| 58 | #define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */ |
Max Krummenacher | 3b74ccf | 2016-11-30 19:43:08 +0100 | [diff] [blame] | 59 | |
Max Krummenacher | 3b74ccf | 2016-11-30 19:43:08 +0100 | [diff] [blame] | 60 | /* |
| 61 | * SATA Configs |
| 62 | */ |
| 63 | #ifdef CONFIG_CMD_SATA |
Max Krummenacher | 3b74ccf | 2016-11-30 19:43:08 +0100 | [diff] [blame] | 64 | #define CONFIG_SYS_SATA_MAX_DEVICE 1 |
| 65 | #define CONFIG_DWC_AHSATA_PORT_ID 0 |
| 66 | #define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR |
| 67 | #define CONFIG_LBA48 |
Max Krummenacher | 3b74ccf | 2016-11-30 19:43:08 +0100 | [diff] [blame] | 68 | #endif |
| 69 | |
| 70 | /* Network */ |
| 71 | #define CONFIG_FEC_MXC |
| 72 | #define CONFIG_MII |
| 73 | #define IMX_FEC_BASE ENET_BASE_ADDR |
| 74 | #define CONFIG_FEC_XCV_TYPE RGMII |
| 75 | #define CONFIG_ETHPRIME "FEC" |
| 76 | #define CONFIG_FEC_MXC_PHYADDR 6 |
Max Krummenacher | 3b74ccf | 2016-11-30 19:43:08 +0100 | [diff] [blame] | 77 | #define CONFIG_IP_DEFRAG |
| 78 | #define CONFIG_TFTP_BLOCKSIZE 4096 |
| 79 | #define CONFIG_TFTP_TSIZE |
| 80 | |
| 81 | /* USB Configs */ |
| 82 | /* Host */ |
Max Krummenacher | 3b74ccf | 2016-11-30 19:43:08 +0100 | [diff] [blame] | 83 | #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 |
| 84 | #define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */ |
| 85 | #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) |
| 86 | #define CONFIG_MXC_USB_FLAGS 0 |
Max Krummenacher | 3b74ccf | 2016-11-30 19:43:08 +0100 | [diff] [blame] | 87 | /* Client */ |
Max Krummenacher | 3b74ccf | 2016-11-30 19:43:08 +0100 | [diff] [blame] | 88 | #define CONFIG_USBD_HS |
| 89 | |
| 90 | #define CONFIG_USB_GADGET_MASS_STORAGE |
Max Krummenacher | 3b74ccf | 2016-11-30 19:43:08 +0100 | [diff] [blame] | 91 | /* USB DFU */ |
| 92 | #define CONFIG_DFU_MMC |
| 93 | |
| 94 | /* Miscellaneous commands */ |
Max Krummenacher | 3b74ccf | 2016-11-30 19:43:08 +0100 | [diff] [blame] | 95 | |
| 96 | /* Framebuffer and LCD */ |
| 97 | #define CONFIG_VIDEO_IPUV3 |
| 98 | #define CONFIG_SYS_CONSOLE_IS_IN_ENV |
| 99 | #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE |
| 100 | #define CONFIG_VIDEO_BMP_RLE8 |
| 101 | #define CONFIG_SPLASH_SCREEN |
| 102 | #define CONFIG_SPLASH_SCREEN_ALIGN |
| 103 | #define CONFIG_BMP_16BPP |
| 104 | #define CONFIG_VIDEO_LOGO |
| 105 | #define CONFIG_VIDEO_BMP_LOGO |
Max Krummenacher | 3b74ccf | 2016-11-30 19:43:08 +0100 | [diff] [blame] | 106 | #define CONFIG_CONSOLE_MUX |
| 107 | #define CONFIG_IMX_HDMI |
| 108 | #define CONFIG_IMX_VIDEO_SKIP |
Max Krummenacher | 3b74ccf | 2016-11-30 19:43:08 +0100 | [diff] [blame] | 109 | |
| 110 | /* allow to overwrite serial and ethaddr */ |
| 111 | #define CONFIG_ENV_OVERWRITE |
Max Krummenacher | 3b74ccf | 2016-11-30 19:43:08 +0100 | [diff] [blame] | 112 | |
| 113 | /* Command definition */ |
| 114 | #undef CONFIG_CMD_LOADB |
| 115 | #undef CONFIG_CMD_LOADS |
| 116 | #undef CONFIG_CMD_NFS |
| 117 | #undef CONFIG_CMD_FLASH |
| 118 | |
| 119 | #undef CONFIG_IPADDR |
| 120 | #define CONFIG_IPADDR 192.168.10.2 |
| 121 | #define CONFIG_NETMASK 255.255.255.0 |
| 122 | #undef CONFIG_SERVERIP |
| 123 | #define CONFIG_SERVERIP 192.168.10.1 |
| 124 | |
| 125 | #define CONFIG_LOADADDR 0x12000000 |
Max Krummenacher | 3b74ccf | 2016-11-30 19:43:08 +0100 | [diff] [blame] | 126 | |
| 127 | #ifdef CONFIG_CMD_SATA |
| 128 | #define CONFIG_DRIVE_SATA "sata " |
| 129 | #else |
| 130 | #define CONFIG_DRIVE_SATA |
| 131 | #endif |
| 132 | |
| 133 | #ifdef CONFIG_CMD_MMC |
| 134 | #define CONFIG_DRIVE_MMC "mmc " |
| 135 | #else |
| 136 | #define CONFIG_DRIVE_MMC |
| 137 | #endif |
| 138 | |
| 139 | #define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC |
| 140 | |
| 141 | #define DFU_ALT_EMMC_INFO \ |
| 142 | "u-boot.imx raw 0x2 0x3ff mmcpart 0;" \ |
| 143 | "boot part 0 1;" \ |
| 144 | "rootfs part 0 2;" \ |
| 145 | "uImage fat 0 1;" \ |
| 146 | "imx6q-colibri-eval-v3.dtb fat 0 1;" \ |
| 147 | "imx6q-colibri-cam-eval-v3.dtb fat 0 1" |
| 148 | |
| 149 | #define EMMC_BOOTCMD \ |
| 150 | "emmcargs=ip=off root=/dev/mmcblk0p2 rw,noatime rootfstype=ext3 " \ |
| 151 | "rootwait\0" \ |
| 152 | "emmcboot=run setup; " \ |
| 153 | "setenv bootargs ${defargs} ${emmcargs} ${setupargs} " \ |
| 154 | "${vidargs}; echo Booting from internal eMMC chip...; " \ |
| 155 | "run emmcdtbload; load mmc 0:1 ${kernel_addr_r} " \ |
| 156 | "${boot_file} && run fdt_fixup && " \ |
| 157 | "bootm ${kernel_addr_r} ${dtbparam}\0" \ |
| 158 | "emmcdtbload=setenv dtbparam; load mmc 0:1 ${fdt_addr_r} " \ |
| 159 | "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0" |
| 160 | |
| 161 | #define MEM_LAYOUT_ENV_SETTINGS \ |
Stefan Agner | 35eebee | 2017-03-09 17:17:51 -0800 | [diff] [blame] | 162 | "bootm_size=0x20000000\0" \ |
Max Krummenacher | 3b74ccf | 2016-11-30 19:43:08 +0100 | [diff] [blame] | 163 | "fdt_addr_r=0x12000000\0" \ |
| 164 | "fdt_high=0xffffffff\0" \ |
| 165 | "initrd_high=0xffffffff\0" \ |
| 166 | "kernel_addr_r=0x11000000\0" \ |
| 167 | "ramdisk_addr_r=0x12100000\0" |
| 168 | |
| 169 | #define NFS_BOOTCMD \ |
| 170 | "nfsargs=ip=:::::eth0:on root=/dev/nfs rw\0" \ |
| 171 | "nfsboot=run setup; " \ |
| 172 | "setenv bootargs ${defargs} ${nfsargs} ${setupargs} " \ |
| 173 | "${vidargs}; echo Booting via DHCP/TFTP/NFS...; " \ |
| 174 | "run nfsdtbload; dhcp ${kernel_addr_r} " \ |
| 175 | "&& run fdt_fixup && bootm ${kernel_addr_r} ${dtbparam}\0" \ |
| 176 | "nfsdtbload=setenv dtbparam; tftp ${fdt_addr_r} ${fdt_file} " \ |
| 177 | "&& setenv dtbparam \" - ${fdt_addr_r}\" && true\0" |
| 178 | |
| 179 | #define SD_BOOTCMD \ |
| 180 | "sdargs=ip=off root=/dev/mmcblk1p2 rw,noatime rootfstype=ext3 " \ |
| 181 | "rootwait\0" \ |
| 182 | "sdboot=run setup; " \ |
| 183 | "setenv bootargs ${defargs} ${sdargs} ${setupargs} " \ |
| 184 | "${vidargs}; echo Booting from SD card; " \ |
| 185 | "run sddtbload; load mmc 1:1 ${kernel_addr_r} " \ |
| 186 | "${boot_file} && run fdt_fixup && " \ |
| 187 | "bootm ${kernel_addr_r} ${dtbparam}\0" \ |
| 188 | "sddtbload=setenv dtbparam; load mmc 1:1 ${fdt_addr_r} " \ |
| 189 | "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0" |
| 190 | |
| 191 | #define USB_BOOTCMD \ |
| 192 | "usbargs=ip=off root=/dev/sda2 rw,noatime rootfstype=ext3 " \ |
| 193 | "rootwait\0" \ |
| 194 | "usbboot=run setup; setenv bootargs ${defargs} ${setupargs} " \ |
| 195 | "${usbargs} ${vidargs}; echo Booting from USB stick...; " \ |
| 196 | "usb start && run usbdtbload; load usb 0:1 ${kernel_addr_r} " \ |
| 197 | "${boot_file} && run fdt_fixup && " \ |
| 198 | "bootm ${kernel_addr_r} ${dtbparam}\0" \ |
| 199 | "usbdtbload=setenv dtbparam; load usb 0:1 ${fdt_addr_r} " \ |
| 200 | "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0" |
| 201 | |
| 202 | #ifndef CONFIG_TDX_APALIS_IMX6_V1_0 |
| 203 | #define FDT_FILE "imx6q-apalis-eval.dtb" |
| 204 | #define FDT_FILE_V1_0 "imx6q-apalis_v1_0-eval.dtb" |
| 205 | #else |
| 206 | #define FDT_FILE "imx6q-apalis_v1_0-eval.dtb" |
| 207 | #endif |
| 208 | #define CONFIG_EXTRA_ENV_SETTINGS \ |
| 209 | "bootcmd=run emmcboot ; echo ; echo emmcboot failed ; " \ |
| 210 | "run nfsboot ; echo ; echo nfsboot failed ; " \ |
| 211 | "usb start ;" \ |
| 212 | "setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \ |
| 213 | "boot_file=uImage\0" \ |
| 214 | "console=ttymxc0\0" \ |
| 215 | "defargs=enable_wait_mode=off vmalloc=400M\0" \ |
| 216 | "dfu_alt_info=" DFU_ALT_EMMC_INFO "\0" \ |
| 217 | EMMC_BOOTCMD \ |
| 218 | "fdt_file=" FDT_FILE "\0" \ |
| 219 | "fdt_fixup=;\0" \ |
| 220 | MEM_LAYOUT_ENV_SETTINGS \ |
| 221 | NFS_BOOTCMD \ |
| 222 | SD_BOOTCMD \ |
| 223 | "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \ |
| 224 | "00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \ |
| 225 | "flash_eth.img && source ${loadaddr}\0" \ |
| 226 | "setsdupdate=setenv interface mmc; setenv drive 1; mmc rescan; load " \ |
| 227 | "${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \ |
| 228 | "source ${loadaddr}\0" \ |
| 229 | "setup=setenv setupargs fec_mac=${ethaddr} " \ |
| 230 | "consoleblank=0 no_console_suspend=1 console=tty1 " \ |
| 231 | "console=${console},${baudrate}n8\0 " \ |
| 232 | "setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \ |
| 233 | "setusbupdate=usb start && setenv interface usb; setenv drive 0; " \ |
| 234 | "load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \ |
| 235 | "source ${loadaddr}\0" \ |
| 236 | "splashpos=m,m\0" \ |
| 237 | "vidargs=mxc_hdmi.only_cea=1 " \ |
| 238 | "video=mxcfb0:dev=hdmi,1920x1080M@60,if=RGB24 " \ |
| 239 | "video=mxcfb1:off video=mxcfb2:off video=mxcfb3:off " \ |
| 240 | "fbmem=32M\0 " |
| 241 | |
| 242 | /* Miscellaneous configurable options */ |
Max Krummenacher | 3b74ccf | 2016-11-30 19:43:08 +0100 | [diff] [blame] | 243 | #undef CONFIG_SYS_CBSIZE |
| 244 | #define CONFIG_SYS_CBSIZE 1024 |
| 245 | #undef CONFIG_SYS_MAXARGS |
| 246 | #define CONFIG_SYS_MAXARGS 48 |
| 247 | |
Max Krummenacher | 3b74ccf | 2016-11-30 19:43:08 +0100 | [diff] [blame] | 248 | #define CONFIG_SYS_MEMTEST_START 0x10000000 |
| 249 | #define CONFIG_SYS_MEMTEST_END 0x10010000 |
| 250 | #define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000 |
| 251 | |
| 252 | #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR |
| 253 | |
Max Krummenacher | 3b74ccf | 2016-11-30 19:43:08 +0100 | [diff] [blame] | 254 | /* Physical Memory Map */ |
| 255 | #define CONFIG_NR_DRAM_BANKS 1 |
| 256 | #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR |
| 257 | |
| 258 | #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM |
| 259 | #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR |
| 260 | #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE |
| 261 | |
| 262 | #define CONFIG_SYS_INIT_SP_OFFSET \ |
| 263 | (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) |
| 264 | #define CONFIG_SYS_INIT_SP_ADDR \ |
| 265 | (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) |
| 266 | |
Masahiro Yamada | 8cea9b5 | 2017-02-11 22:43:54 +0900 | [diff] [blame] | 267 | /* environment organization */ |
Max Krummenacher | 3b74ccf | 2016-11-30 19:43:08 +0100 | [diff] [blame] | 268 | |
| 269 | #define CONFIG_ENV_SIZE (8 * 1024) |
| 270 | |
Max Krummenacher | 3b74ccf | 2016-11-30 19:43:08 +0100 | [diff] [blame] | 271 | #if defined(CONFIG_ENV_IS_IN_MMC) |
| 272 | /* Environment in eMMC, before config block at the end of 1st "boot sector" */ |
| 273 | #define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE + \ |
| 274 | CONFIG_TDX_CFG_BLOCK_OFFSET) |
| 275 | #define CONFIG_SYS_MMC_ENV_DEV 0 |
| 276 | #define CONFIG_SYS_MMC_ENV_PART 1 |
| 277 | #endif |
| 278 | |
| 279 | #define CONFIG_OF_SYSTEM_SETUP |
| 280 | |
| 281 | #define CONFIG_CMD_TIME |
| 282 | |
Max Krummenacher | 3b74ccf | 2016-11-30 19:43:08 +0100 | [diff] [blame] | 283 | #endif /* __CONFIG_H */ |