Chris Packham | 5cd63ec | 2018-05-30 20:14:35 +1200 | [diff] [blame] | 1 | /* SPDX-License-Identifier: GPL-2.0+ */ |
| 2 | /* |
| 3 | * (C) Copyright 2016 Allied Telesis <www.alliedtelesis.co.nz> |
| 4 | */ |
| 5 | |
| 6 | #ifndef _CONFIG_SBX81LIFKW_H |
| 7 | #define _CONFIG_SBX81LIFKW_H |
| 8 | |
| 9 | /* |
| 10 | * High Level Configuration Options (easy to change) |
| 11 | */ |
| 12 | #define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */ |
| 13 | #define CONFIG_KW88F6281 1 /* SOC Name */ |
| 14 | #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ |
| 15 | #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage.cfg |
| 16 | #define CONFIG_BUILD_TARGET "u-boot.kwb" |
| 17 | |
| 18 | /* additions for new ARM relocation support */ |
| 19 | #define CONFIG_SYS_SDRAM_BASE 0x00000000 |
| 20 | |
| 21 | #define CONFIG_MD5 /* get_random_hex on krikwood needs MD5 support */ |
| 22 | #define CONFIG_KIRKWOOD_EGIGA_INIT /* Enable GbePort0/1 for kernel */ |
| 23 | #define CONFIG_KIRKWOOD_PCIE_INIT /* Enable PCIE Port0 */ |
| 24 | #define CONFIG_KIRKWOOD_RGMII_PAD_1V8 /* Set RGMII Pad voltage to 1.8V */ |
| 25 | #define CONFIG_KIRKWOOD_GPIO 1 |
| 26 | |
| 27 | #define CONFIG_MISC_INIT_R /* call misc_init_r */ |
| 28 | |
| 29 | /* |
| 30 | * NS16550 Configuration |
| 31 | */ |
| 32 | #define CONFIG_SYS_NS16550 |
| 33 | #define CONFIG_SYS_NS16550_SERIAL |
| 34 | #define CONFIG_SYS_NS16550_REG_SIZE (-4) |
| 35 | #define CONFIG_SYS_NS16550_CLK CONFIG_SYS_TCLK |
| 36 | #define CONFIG_SYS_NS16550_COM1 KW_UART0_BASE |
| 37 | |
| 38 | /* |
| 39 | * Serial Port configuration |
| 40 | * The following definitions let you select what serial you want to use |
| 41 | * for your console driver. |
| 42 | */ |
| 43 | |
| 44 | #define CONFIG_CONS_INDEX 1 /*Console on UART0 */ |
| 45 | |
| 46 | /* |
| 47 | * For booting Linux, the board info and command line data |
| 48 | * have to be in the first 8 MB of memory, since this is |
| 49 | * the maximum mapped by the Linux kernel during initialization. |
| 50 | */ |
| 51 | #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ |
| 52 | #define CONFIG_INITRD_TAG 1 /* enable INITRD tag */ |
| 53 | #define CONFIG_SETUP_MEMORY_TAGS 1 /* enable memory tag */ |
| 54 | |
| 55 | #define MTDPARTS_DEFAULT "mtdparts=spi0.0:768K(boot)ro,256K(boot-env),14M(user),1M(errlog)" |
| 56 | #define MTDPARTS_MTDOOPS "errlog" |
| 57 | #define CONFIG_DOS_PARTITION |
| 58 | |
| 59 | /* |
| 60 | * Environment variables configurations |
| 61 | */ |
| 62 | #define CONFIG_ENV_SPI_BUS 0 |
| 63 | #define CONFIG_ENV_SPI_CS 0 |
| 64 | #define CONFIG_ENV_SPI_MAX_HZ 20000000 /* 20Mhz */ |
| 65 | #define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE |
| 66 | #define CONFIG_ENV_SECT_SIZE 0x40000 /* 256K */ |
| 67 | #define CONFIG_ENV_SIZE 0x02000 |
| 68 | #define CONFIG_ENV_OFFSET 0xc0000 /* env starts here - 768K */ |
| 69 | |
| 70 | /* |
| 71 | * U-Boot bootcode configuration |
| 72 | */ |
| 73 | |
| 74 | #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for monitor */ |
| 75 | #define CONFIG_SYS_MALLOC_LEN (4 << 20) /* Reserve 4.0 MB for malloc */ |
| 76 | |
| 77 | /* |
| 78 | * For booting Linux, the board info and command line data |
| 79 | * have to be in the first 8 MB of memory, since this is |
| 80 | * the maximum mapped by the Linux kernel during initialization. |
| 81 | */ |
| 82 | #define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Mem map for Linux*/ |
| 83 | |
| 84 | /* size in bytes reserved for initial data */ |
| 85 | |
| 86 | #include <asm/arch/config.h> |
| 87 | /* There is no PHY directly connected so don't ask it for link status */ |
| 88 | #undef CONFIG_SYS_FAULT_ECHO_LINK_DOWN |
| 89 | |
| 90 | /* |
| 91 | * Other required minimal configurations |
| 92 | */ |
| 93 | #define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */ |
| 94 | #define CONFIG_NR_DRAM_BANKS 4 |
| 95 | #define CONFIG_SYS_MEMTEST_START 0x00400000 /* 4M */ |
| 96 | #define CONFIG_SYS_MEMTEST_END 0x007fffff /*(_8M -1) */ |
| 97 | #define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */ |
| 98 | |
| 99 | /* |
| 100 | * Ethernet Driver configuration |
| 101 | */ |
| 102 | #ifdef CONFIG_CMD_NET |
| 103 | #define CONFIG_NETCONSOLE /* include NetConsole support */ |
| 104 | #define CONFIG_NET_MULTI /* specify more that one ports available */ |
| 105 | #define CONFIG_MII /* expose smi over miiphy interface */ |
Chris Packham | 5cd63ec | 2018-05-30 20:14:35 +1200 | [diff] [blame] | 106 | #define CONFIG_MVGBE /* Enable kirkwood Gbe Controller Driver */ |
| 107 | #define CONFIG_MVGBE_PORTS {1, 0} /* enable a single port */ |
| 108 | #define CONFIG_PHY_BASE_ADR 0x01 |
| 109 | #define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */ |
Chris Packham | 5cd63ec | 2018-05-30 20:14:35 +1200 | [diff] [blame] | 110 | #endif /* CONFIG_CMD_NET */ |
| 111 | |
| 112 | /* |
| 113 | * Time settings |
| 114 | */ |
| 115 | #define CONFIG_RTC_MV |
| 116 | |
| 117 | #define CONFIG_SYS_LOAD_ADDR 0x1000000 /* default location for tftp and bootm */ |
| 118 | |
| 119 | #endif /* _CONFIG_SBX81LIFKW_H */ |