blob: bbdaf0443d9f2a53a5a7452f12e69ef29e2d26eb [file] [log] [blame]
Stefan Roese05d10b52013-04-17 00:32:43 +00001/*
2 * Copyright (C) 2013 Stefan Roese <sr@denx.de>
3 *
4 * Configuration settings for the ProjectionDesign / Barco
5 * Titanium board.
6 *
7 * Based on mx6qsabrelite.h which is:
8 * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
9 *
Wolfgang Denkd79de1d2013-07-08 09:37:19 +020010 * SPDX-License-Identifier: GPL-2.0+
Stefan Roese05d10b52013-04-17 00:32:43 +000011 */
12
13#ifndef __CONFIG_H
14#define __CONFIG_H
15
Eric Nelson062772c2013-11-26 17:40:30 -070016#include "mx6_common.h"
Stefan Roese05d10b52013-04-17 00:32:43 +000017
Stefan Roese05d10b52013-04-17 00:32:43 +000018#define CONFIG_MX6Q
Stefan Roese05d10b52013-04-17 00:32:43 +000019
20#define MACH_TYPE_TITANIUM 3769
21#define CONFIG_MACH_TYPE MACH_TYPE_TITANIUM
22
Stefan Roese05d10b52013-04-17 00:32:43 +000023/* Size of malloc() pool */
24#define CONFIG_SYS_MALLOC_LEN (2 * 1024 * 1024)
25
26#define CONFIG_BOARD_EARLY_INIT_F
27#define CONFIG_MISC_INIT_R
Stefan Roese05d10b52013-04-17 00:32:43 +000028
29#define CONFIG_MXC_UART
30#define CONFIG_MXC_UART_BASE UART1_BASE
31
32/* I2C Configs */
trem03997412013-09-21 18:13:36 +020033#define CONFIG_SYS_I2C
34#define CONFIG_SYS_I2C_MXC
Albert ARIBAUD \\(3ADEV\\)eb943872015-09-21 22:43:38 +020035#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
36#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
York Sunf1a52162015-03-20 10:20:40 -070037#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
Stefan Roese05d10b52013-04-17 00:32:43 +000038#define CONFIG_SYS_I2C_SPEED 100000
39
40/* MMC Configs */
Stefan Roese05d10b52013-04-17 00:32:43 +000041#define CONFIG_SYS_FSL_ESDHC_ADDR 0
42#define CONFIG_SYS_FSL_USDHC_NUM 1
43
Stefan Roese05d10b52013-04-17 00:32:43 +000044#define CONFIG_FEC_MXC
45#define CONFIG_MII
46#define IMX_FEC_BASE ENET_BASE_ADDR
47#define CONFIG_FEC_XCV_TYPE RGMII
48#define CONFIG_FEC_MXC_PHYADDR 4
49#define CONFIG_PHYLIB
50#define CONFIG_PHY_MICREL
51#define CONFIG_PHY_MICREL_KSZ9021
52
53/* USB Configs */
Stefan Roese05d10b52013-04-17 00:32:43 +000054#define CONFIG_USB_EHCI
55#define CONFIG_USB_EHCI_MX6
Stefan Roese05d10b52013-04-17 00:32:43 +000056#define CONFIG_MXC_USB_PORT 1
57#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
58#define CONFIG_MXC_USB_FLAGS 0
59
60/* Miscellaneous commands */
61#define CONFIG_CMD_BMODE
62
Stefan Roese05d10b52013-04-17 00:32:43 +000063#define CONFIG_SYS_MEMTEST_START 0x10000000
64#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (500 << 20))
65
66#define CONFIG_HOSTNAME titanium
67#define CONFIG_UBI_PART ubi
68#define CONFIG_UBIFS_VOLUME rootfs0
69
70#define MTDIDS_DEFAULT "nand0=gpmi-nand"
71#define MTDPARTS_DEFAULT "mtdparts=gpmi-nand:16M(uboot),512k(env1)," \
72 "512k(env2),-(ubi)"
73
74#define CONFIG_EXTRA_ENV_SETTINGS \
75 "kernel=" __stringify(CONFIG_HOSTNAME) "/uImage\0" \
76 "kernel_fs=/boot/uImage\0" \
77 "kernel_addr=11000000\0" \
78 "dtb=" __stringify(CONFIG_HOSTNAME) "/" \
79 __stringify(CONFIG_HOSTNAME) ".dtb\0" \
80 "dtb_fs=/boot/" __stringify(CONFIG_HOSTNAME) ".dtb\0" \
81 "dtb_addr=12800000\0" \
82 "script=boot.scr\0" \
83 "uimage=uImage\0" \
84 "console=ttymxc0\0" \
85 "baudrate=115200\0" \
86 "fdt_high=0xffffffff\0" \
87 "initrd_high=0xffffffff\0" \
88 "mmcdev=0\0" \
89 "mmcpart=1\0" \
90 "uimage=uImage\0" \
91 "loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr}" \
92 " ${script}\0" \
93 "bootscript=echo Running bootscript from mmc ...; source\0" \
94 "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
95 "mmcroot=/dev/mmcblk0p2\0" \
96 "mmcargs=setenv bootargs console=${console},${baudrate} " \
97 "root=${mmcroot} rootwait rw\0" \
98 "bootmmc=run mmcargs; fatload mmc ${mmcdev}:${mmcpart} ${loadaddr}" \
99 " ${uimage}; bootm\0" \
100 "addip=setenv bootargs ${bootargs} " \
101 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
102 ":${hostname}:${netdev}:off panic=1\0" \
103 "addcon=setenv bootargs ${bootargs} console=ttymxc0," \
104 "${baudrate}\0" \
105 "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
106 "rootpath=/opt/eldk-5.3/armv7a/rootfs-minimal-mtdutils\0" \
107 "nfsargs=setenv bootargs root=/dev/nfs rw " \
108 "nfsroot=${serverip}:${rootpath}\0" \
109 "ubifs=" __stringify(CONFIG_HOSTNAME) "/ubifs.img\0" \
110 "part=" __stringify(CONFIG_UBI_PART) "\0" \
111 "boot_vol=0\0" \
112 "vol=" __stringify(CONFIG_UBIFS_VOLUME) "\0" \
113 "load_ubifs=tftp ${kernel_addr} ${ubifs}\0" \
114 "update_ubifs=ubi part ${part};ubi write ${kernel_addr} ${vol}" \
115 " ${filesize}\0" \
116 "upd_ubifs=run load_ubifs update_ubifs\0" \
117 "init_ubi=nand erase.part ubi;ubi part ${part};" \
118 "ubi create ${vol} c800000\0" \
119 "mtdids=" MTDIDS_DEFAULT "\0" \
120 "mtdparts=" MTDPARTS_DEFAULT "\0" \
121 "nand_ubifs=run ubifs_mount ubifs_load ubifsargs addip" \
122 " addcon addmtd;" \
123 "bootm ${kernel_addr} - ${dtb_addr}\0" \
124 "ubifsargs=set bootargs ubi.mtd=ubi " \
125 "root=ubi:rootfs${boot_vol} rootfstype=ubifs\0" \
126 "ubifs_mount=ubi part ubi;ubifsmount ubi:rootfs${boot_vol}\0" \
127 "ubifs_load=ubifsload ${kernel_addr} ${kernel_fs};" \
128 "ubifsload ${dtb_addr} ${dtb_fs};\0" \
129 "nand_ubifs=run ubifs_mount ubifs_load ubifsargs addip addcon " \
130 "addmtd;bootm ${kernel_addr} - ${dtb_addr}\0" \
131 "load_kernel=tftp ${kernel_addr} ${kernel}\0" \
132 "load_dtb=tftp ${dtb_addr} ${dtb}\0" \
133 "net_nfs=run load_dtb load_kernel; " \
134 "run nfsargs addip addcon addmtd;" \
135 "bootm ${kernel_addr} - ${dtb_addr}\0" \
136 "delenv=env default -a -f; saveenv; reset\0"
137
138#define CONFIG_BOOTCOMMAND "run nand_ubifs"
139
Stefan Roese05d10b52013-04-17 00:32:43 +0000140/* Print Buffer Size */
141#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
142 sizeof(CONFIG_SYS_PROMPT) + 16)
Stefan Roese05d10b52013-04-17 00:32:43 +0000143
Stefan Roese05d10b52013-04-17 00:32:43 +0000144/* Physical Memory Map */
145#define CONFIG_NR_DRAM_BANKS 1
146#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
147#define PHYS_SDRAM_SIZE (512 << 20)
148
149#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
150#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
151#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
152
153#define CONFIG_SYS_INIT_SP_OFFSET \
154 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
155#define CONFIG_SYS_INIT_SP_ADDR \
156 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
157
Stefan Roese05d10b52013-04-17 00:32:43 +0000158/* Enable NAND support */
159#define CONFIG_CMD_NAND
160#define CONFIG_CMD_NAND_TRIMFFS
Stefan Roese05d10b52013-04-17 00:32:43 +0000161
162#ifdef CONFIG_CMD_NAND
163
164/* NAND stuff */
165#define CONFIG_NAND_MXS
166#define CONFIG_SYS_MAX_NAND_DEVICE 1
167#define CONFIG_SYS_NAND_BASE 0x40000000
168#define CONFIG_SYS_NAND_5_ADDR_CYCLE
169#define CONFIG_SYS_NAND_ONFI_DETECTION
170
171/* DMA stuff, needed for GPMI/MXS NAND support */
172#define CONFIG_APBH_DMA
173#define CONFIG_APBH_DMA_BURST
174#define CONFIG_APBH_DMA_BURST8
175
176/* Environment in NAND */
177#define CONFIG_ENV_IS_IN_NAND
178#define CONFIG_ENV_OFFSET (16 << 20)
179#define CONFIG_ENV_SECT_SIZE (128 << 10)
180#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
181#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + (512 << 10))
182#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
183
184#else /* CONFIG_CMD_NAND */
185
186/* Environment in MMC */
187#define CONFIG_ENV_SIZE (8 << 10)
188#define CONFIG_ENV_IS_IN_MMC
189#define CONFIG_ENV_OFFSET (6 * 64 * 1024)
190#define CONFIG_SYS_MMC_ENV_DEV 0
191
192#endif /* CONFIG_CMD_NAND */
193
194/* UBI/UBIFS config options */
195#define CONFIG_LZO
196#define CONFIG_MTD_DEVICE
197#define CONFIG_MTD_PARTITIONS
198#define CONFIG_RBTREE
199#define CONFIG_CMD_MTDPARTS
Stefan Roese05d10b52013-04-17 00:32:43 +0000200#define CONFIG_CMD_UBIFS
201
Stefan Roese05d10b52013-04-17 00:32:43 +0000202#endif /* __CONFIG_H */