blob: c08294c2b768c5af955b96d339fd9db49758a3d3 [file] [log] [blame]
Peng Fandbf316a2015-07-20 19:28:35 +08001/*
2 * Copyright (C) 2015 Freescale Semiconductor, Inc.
3 *
4 * Configuration settings for the Freescale i.MX6UL 14x14 EVK board.
5 *
6 * SPDX-License-Identifier: GPL-2.0+
7 */
8#ifndef __MX6UL_14X14_EVK_CONFIG_H
9#define __MX6UL_14X14_EVK_CONFIG_H
10
Peng Fandbf316a2015-07-20 19:28:35 +080011#include <asm/arch/imx-regs.h>
12#include <linux/sizes.h>
13#include "mx6_common.h"
14#include <asm/imx-common/gpio.h>
15
Peng Fan5630c982015-09-06 15:02:34 +080016#define is_mx6ul_9x9_evk() CONFIG_IS_ENABLED(TARGET_MX6UL_9X9_EVK)
17
Peng Fandbf316a2015-07-20 19:28:35 +080018/* SPL options */
Peng Fandbf316a2015-07-20 19:28:35 +080019#include "imx6_spl.h"
20
Peng Fan5630c982015-09-06 15:02:34 +080021#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
22
Peng Fandbf316a2015-07-20 19:28:35 +080023/* Size of malloc() pool */
24#define CONFIG_SYS_MALLOC_LEN (16 * SZ_1M)
25
26#define CONFIG_BOARD_EARLY_INIT_F
27#define CONFIG_BOARD_LATE_INIT
28
29#define CONFIG_MXC_UART
30#define CONFIG_MXC_UART_BASE UART1_BASE
31
Peng Fandbf316a2015-07-20 19:28:35 +080032/* MMC Configs */
33#ifdef CONFIG_FSL_USDHC
34#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR
35
36/* NAND pin conflicts with usdhc2 */
37#ifdef CONFIG_NAND_MXS
38#define CONFIG_SYS_FSL_USDHC_NUM 1
39#else
40#define CONFIG_SYS_FSL_USDHC_NUM 2
41#endif
42
Peng Fandbf316a2015-07-20 19:28:35 +080043#endif
44
Peng Fandbf316a2015-07-20 19:28:35 +080045/* I2C configs */
Peng Fandbf316a2015-07-20 19:28:35 +080046#ifdef CONFIG_CMD_I2C
47#define CONFIG_SYS_I2C
48#define CONFIG_SYS_I2C_MXC
Albert ARIBAUD \\(3ADEV\\)eb943872015-09-21 22:43:38 +020049#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
50#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
Peng Fandbf316a2015-07-20 19:28:35 +080051#define CONFIG_SYS_I2C_SPEED 100000
Peng Fandbf316a2015-07-20 19:28:35 +080052
Peng Fan5630c982015-09-06 15:02:34 +080053/* PMIC only for 9X9 EVK */
54#define CONFIG_POWER
55#define CONFIG_POWER_I2C
56#define CONFIG_POWER_PFUZE3000
57#define CONFIG_POWER_PFUZE3000_I2C_ADDR 0x08
58#endif
Peng Fandbf316a2015-07-20 19:28:35 +080059
Peng Fandbf316a2015-07-20 19:28:35 +080060#define CONFIG_SYS_MMC_IMG_LOAD_PART 1
61
62#define CONFIG_EXTRA_ENV_SETTINGS \
63 "script=boot.scr\0" \
64 "image=zImage\0" \
65 "console=ttymxc0\0" \
66 "fdt_high=0xffffffff\0" \
67 "initrd_high=0xffffffff\0" \
Peng Fan5630c982015-09-06 15:02:34 +080068 "fdt_file=undefined\0" \
Peng Fandbf316a2015-07-20 19:28:35 +080069 "fdt_addr=0x83000000\0" \
70 "boot_fdt=try\0" \
71 "ip_dyn=yes\0" \
Peng Fan60c72b62015-10-29 15:54:48 +080072 "videomode=video=ctfb:x:480,y:272,depth:24,pclk:108695,le:8,ri:4,up:2,lo:4,hs:41,vs:10,sync:0,vmode:0\0" \
Peng Fandbf316a2015-07-20 19:28:35 +080073 "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
74 "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
75 "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
76 "mmcautodetect=yes\0" \
77 "mmcargs=setenv bootargs console=${console},${baudrate} " \
78 "root=${mmcroot}\0" \
79 "loadbootscript=" \
80 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
81 "bootscript=echo Running bootscript from mmc ...; " \
82 "source\0" \
83 "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
84 "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
85 "mmcboot=echo Booting from mmc ...; " \
86 "run mmcargs; " \
87 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
88 "if run loadfdt; then " \
89 "bootz ${loadaddr} - ${fdt_addr}; " \
90 "else " \
91 "if test ${boot_fdt} = try; then " \
92 "bootz; " \
93 "else " \
94 "echo WARN: Cannot load the DT; " \
95 "fi; " \
96 "fi; " \
97 "else " \
98 "bootz; " \
99 "fi;\0" \
100 "netargs=setenv bootargs console=${console},${baudrate} " \
101 "root=/dev/nfs " \
102 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
103 "netboot=echo Booting from net ...; " \
104 "run netargs; " \
105 "if test ${ip_dyn} = yes; then " \
106 "setenv get_cmd dhcp; " \
107 "else " \
108 "setenv get_cmd tftp; " \
109 "fi; " \
110 "${get_cmd} ${image}; " \
111 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
112 "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
113 "bootz ${loadaddr} - ${fdt_addr}; " \
114 "else " \
115 "if test ${boot_fdt} = try; then " \
116 "bootz; " \
117 "else " \
118 "echo WARN: Cannot load the DT; " \
119 "fi; " \
120 "fi; " \
121 "else " \
122 "bootz; " \
Peng Fan5630c982015-09-06 15:02:34 +0800123 "fi;\0" \
124 "findfdt="\
125 "if test $fdt_file = undefined; then " \
126 "if test $board_name = EVK && test $board_rev = 9X9; then " \
127 "setenv fdt_file imx6ul-9x9-evk.dtb; fi; " \
128 "if test $board_name = EVK && test $board_rev = 14X14; then " \
129 "setenv fdt_file imx6ul-14x14-evk.dtb; fi; " \
130 "if test $fdt_file = undefined; then " \
131 "echo WARNING: Could not determine dtb to use; fi; " \
132 "fi;\0" \
Peng Fandbf316a2015-07-20 19:28:35 +0800133
134#define CONFIG_BOOTCOMMAND \
Peng Fan5630c982015-09-06 15:02:34 +0800135 "run findfdt;" \
Peng Fandbf316a2015-07-20 19:28:35 +0800136 "mmc dev ${mmcdev};" \
137 "mmc dev ${mmcdev}; if mmc rescan; then " \
138 "if run loadbootscript; then " \
139 "run bootscript; " \
140 "else " \
141 "if run loadimage; then " \
142 "run mmcboot; " \
143 "else run netboot; " \
144 "fi; " \
145 "fi; " \
146 "else run netboot; fi"
147
148/* Miscellaneous configurable options */
Peng Fandbf316a2015-07-20 19:28:35 +0800149#define CONFIG_SYS_MEMTEST_START 0x80000000
Peng Fana03003a2016-01-05 14:03:36 +0800150#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x8000000)
Peng Fandbf316a2015-07-20 19:28:35 +0800151
152#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
153#define CONFIG_SYS_HZ 1000
154
155#define CONFIG_CMDLINE_EDITING
156#define CONFIG_STACKSIZE SZ_128K
157
158/* Physical Memory Map */
159#define CONFIG_NR_DRAM_BANKS 1
160#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
161
162#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
163#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
164#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
165
166#define CONFIG_SYS_INIT_SP_OFFSET \
167 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
168#define CONFIG_SYS_INIT_SP_ADDR \
169 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
170
171/* FLASH and environment organization */
172#define CONFIG_SYS_NO_FLASH
173
174#define CONFIG_ENV_SIZE SZ_8K
175#define CONFIG_ENV_IS_IN_MMC
176#define CONFIG_ENV_OFFSET (8 * SZ_64K)
177#define CONFIG_SYS_MMC_ENV_DEV 1 /* USDHC2 */
178#define CONFIG_SYS_MMC_ENV_PART 0 /* user area */
179#define CONFIG_MMCROOT "/dev/mmcblk1p2" /* USDHC2 */
180
Peng Fandbf316a2015-07-20 19:28:35 +0800181#define CONFIG_CMD_BMODE
182
183#ifndef CONFIG_SYS_DCACHE_OFF
Peng Fandbf316a2015-07-20 19:28:35 +0800184#endif
185
Peng Fandbf316a2015-07-20 19:28:35 +0800186#ifdef CONFIG_FSL_QSPI
Peng Fandbf316a2015-07-20 19:28:35 +0800187#define CONFIG_SF_DEFAULT_BUS 0
188#define CONFIG_SF_DEFAULT_CS 0
189#define CONFIG_SF_DEFAULT_SPEED 40000000
190#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
191#define FSL_QSPI_FLASH_NUM 1
192#define FSL_QSPI_FLASH_SIZE SZ_32M
193#endif
194
195/* USB Configs */
Peng Fandbf316a2015-07-20 19:28:35 +0800196#ifdef CONFIG_CMD_USB
197#define CONFIG_USB_EHCI
198#define CONFIG_USB_EHCI_MX6
Peng Fandbf316a2015-07-20 19:28:35 +0800199#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
200#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
201#define CONFIG_MXC_USB_FLAGS 0
202#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
203#endif
204
Peng Fan32cfb352015-08-12 17:46:52 +0800205#ifdef CONFIG_CMD_NET
206#define CONFIG_FEC_MXC
207#define CONFIG_MII
208#define CONFIG_FEC_ENET_DEV 1
209
210#if (CONFIG_FEC_ENET_DEV == 0)
211#define IMX_FEC_BASE ENET_BASE_ADDR
212#define CONFIG_FEC_MXC_PHYADDR 0x2
213#define CONFIG_FEC_XCV_TYPE RMII
214#elif (CONFIG_FEC_ENET_DEV == 1)
215#define IMX_FEC_BASE ENET2_BASE_ADDR
216#define CONFIG_FEC_MXC_PHYADDR 0x1
217#define CONFIG_FEC_XCV_TYPE RMII
218#endif
219#define CONFIG_ETHPRIME "FEC"
220
221#define CONFIG_PHYLIB
222#define CONFIG_PHY_MICREL
Peng Fan32cfb352015-08-12 17:46:52 +0800223#endif
224
Adrian Alonsoce08c362015-09-02 13:54:13 -0500225#define CONFIG_IMX_THERMAL
Peng Fandbf316a2015-07-20 19:28:35 +0800226
Peng Fanc0eaca22016-01-04 12:19:14 +0800227#ifndef CONFIG_SPL_BUILD
Peng Fan60c72b62015-10-29 15:54:48 +0800228#ifdef CONFIG_VIDEO
Peng Fan60c72b62015-10-29 15:54:48 +0800229#define CONFIG_VIDEO_MXS
230#define CONFIG_VIDEO_LOGO
Peng Fan60c72b62015-10-29 15:54:48 +0800231#define CONFIG_SPLASH_SCREEN
232#define CONFIG_SPLASH_SCREEN_ALIGN
233#define CONFIG_CMD_BMP
234#define CONFIG_BMP_16BPP
235#define CONFIG_VIDEO_BMP_RLE8
236#define CONFIG_VIDEO_BMP_LOGO
237#define MXS_LCDIF_BASE MX6UL_LCDIF1_BASE_ADDR
238#endif
Peng Fanc0eaca22016-01-04 12:19:14 +0800239#endif
Peng Fan60c72b62015-10-29 15:54:48 +0800240
Peng Fandbf316a2015-07-20 19:28:35 +0800241#endif