blob: 2cb8f5a09ca794304ef8a1ed995e768d8066b952 [file] [log] [blame]
Thomas Chou7fdee742015-11-09 14:45:06 +08001/*
2 * (C) Copyright 2005, Psyent Corporation <www.psyent.com>
3 * Scott McNutt <smcnutt@psyent.com>
4 * (C) Copyright 2010, Thomas Chou <thomas@wytron.com.tw>
5 *
6 * SPDX-License-Identifier: GPL-2.0+
7 */
8
9#ifndef __CONFIG_H
10#define __CONFIG_H
11
12/*
13 * BOARD/CPU
14 */
Thomas Chou7fdee742015-11-09 14:45:06 +080015#define CONFIG_DISPLAY_BOARDINFO_LATE
16
17/*
18 * SERIAL
19 */
20#define CONFIG_BAUDRATE 115200
Thomas Chou8e27fd62015-11-19 21:48:15 +080021#define CONFIG_SYS_NS16550_MEM32
Thomas Chou7fdee742015-11-09 14:45:06 +080022
23/*
24 * Flash
25 */
26#define CONFIG_SYS_MAX_FLASH_BANKS 1
27#define CONFIG_SYS_MAX_FLASH_SECT 1024
28#define CONFIG_MTD_DEVICE
29
30/*
31 * NET options
32 */
33#define CONFIG_SYS_RX_ETH_BUFFER 0
Thomas Chou7fdee742015-11-09 14:45:06 +080034#define CONFIG_PHY_GIGE
35#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
36#define CONFIG_PHY_MARVELL
37
38/*
39 * BOOTP options
40 */
41#define CONFIG_BOOTP_BOOTFILESIZE
42#define CONFIG_BOOTP_BOOTPATH
43#define CONFIG_BOOTP_GATEWAY
44#define CONFIG_BOOTP_HOSTNAME
45
46/*
47 * FDT options
48 */
Thomas Chou7fdee742015-11-09 14:45:06 +080049#define CONFIG_LMB
50
51/*
Thomas Chou7fdee742015-11-09 14:45:06 +080052 * MEMORY ORGANIZATION
53 * -Monitor at top of sdram.
54 * -The heap is placed below the monitor
55 * -The stack is placed below the heap (&grows down).
56 */
57#define CONFIG_SYS_SDRAM_BASE 0xc8000000
58#define CONFIG_SYS_SDRAM_SIZE 0x08000000
59#define CONFIG_NR_DRAM_BANKS 1
60#define CONFIG_MONITOR_IS_IN_RAM
Marek Vasut307c7152015-12-15 03:09:23 +010061#define CONFIG_SYS_MONITOR_LEN 0x80000 /* Reserve 512k */
Thomas Chou7fdee742015-11-09 14:45:06 +080062#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_SDRAM_BASE + \
63 CONFIG_SYS_SDRAM_SIZE - \
64 CONFIG_SYS_MONITOR_LEN)
65#define CONFIG_SYS_MALLOC_LEN 0x20000
66
67/*
Marek Vasuta979a6d2015-12-15 03:09:22 +010068 * ENVIRONMENT -- Put environment in sector CONFIG_SYS_MONITOR_LEN above
69 * CONFIG_SYS_RESET_ADDR, since we assume the monitor is stored at the
70 * reset address, no? This will keep the environment in user region
71 * of flash. NOTE: the monitor length must be multiple of sector size
72 * (which is common practice).
73 */
74#define CONFIG_ENV_IS_IN_FLASH
75
76#define CONFIG_ENV_SIZE 0x10000 /* 64k, 1 sector */
77#define CONFIG_ENV_OVERWRITE /* Serial change Ok */
78#define CONFIG_ENV_ADDR (0xf4000000 + CONFIG_SYS_MONITOR_LEN)
79
80/*
Thomas Chou7fdee742015-11-09 14:45:06 +080081 * MISC
82 */
83#define CONFIG_SYS_LONGHELP /* Provide extended help */
84#define CONFIG_SYS_CBSIZE 256 /* Console I/O buf size */
85#define CONFIG_SYS_MAXARGS 16 /* Max command args */
86#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Bootarg buf size */
87#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
88 sizeof(CONFIG_SYS_PROMPT) + \
89 16) /* Print buf size */
Marek Vasutd32b2af2015-12-15 03:09:24 +010090#define CONFIG_SYS_LOAD_ADDR 0xcc000000 /* Half of RAM */
91#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
Thomas Chou7fdee742015-11-09 14:45:06 +080092#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
93#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MONITOR_BASE - \
94 CONFIG_ENV_SIZE - \
95 CONFIG_SYS_MALLOC_LEN - \
96 0x10000)
Marek Vasuta0b89362015-12-16 01:32:48 +010097#define CONFIG_AUTO_COMPLETE
Thomas Chou7fdee742015-11-09 14:45:06 +080098#define CONFIG_CMDLINE_EDITING
Thomas Chou7fdee742015-11-09 14:45:06 +080099
100#endif /* __CONFIG_H */