Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / 2e83487171a7d1ebce20cb15ca9fb3c0d9cd6cd7 / . / dts / upstream / src / arm / ti / omap / omap3-n900.dts
blob: d334853412517378b460577067da2241cde0d319 [file] [log] [blame]
Tom Rini53633a82024-02-29 12:33:36 -0500[diff] [blame]1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Copyright (C) 2013 Pavel Machek <pavel@ucw.cz>
4 * Copyright (C) 2013-2014 Aaro Koskinen <aaro.koskinen@iki.fi>
5 */
6
7/dts-v1/;
8
9#include "omap34xx.dtsi"
10#include <dt-bindings/input/input.h>
11#include <dt-bindings/leds/common.h>
12#include <dt-bindings/media/video-interfaces.h>
13
14/*
15 * Default secure signed bootloader (Nokia X-Loader) does not enable L3 firewall
16 * for omap AES HW crypto support. When linux kernel try to access memory of AES
17 * blocks then kernel receive "Unhandled fault: external abort on non-linefetch"
18 * and crash. Until somebody fix omap-aes.c and omap_hwmod_3xxx_data.c code (no
19 * crash anymore) omap AES support will be disabled for all Nokia N900 devices.
20 * There is "unofficial" version of bootloader which enables AES in L3 firewall
21 * but it is not widely used and to prevent kernel crash rather AES is disabled.
22 * There is also no runtime detection code if AES is disabled in L3 firewall...
23 */
24&aes1_target {
25 status = "disabled";
26};
27
28&aes2_target {
29 status = "disabled";
30};
31
32/ {
33 model = "Nokia N900";
34 compatible = "nokia,omap3-n900", "ti,omap3430", "ti,omap3";
35
36 aliases {
37 i2c0;
38 i2c1 = &i2c1;
39 i2c2 = &i2c2;
40 i2c3 = &i2c3;
41 display0 = &lcd;
42 display1 = &tv;
43 };
44
45 cpus {
46 cpu@0 {
47 cpu0-supply = <&vcc>;
48 };
49 };
50
51 leds {
52 compatible = "gpio-leds";
53 led-heartbeat {
54 label = "debug::sleep";
55 gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>; /* 162 */
56 linux,default-trigger = "default-on";
57 pinctrl-names = "default";
58 pinctrl-0 = <&debug_leds>;
59 };
60 };
61
62 memory@80000000 {
63 device_type = "memory";
64 reg = <0x80000000 0x10000000>; /* 256 MB */
65 };
66
67 gpio_keys {
68 compatible = "gpio-keys";
69
70 camera_lens_cover {
71 label = "Camera Lens Cover";
72 gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* 110 */
73 linux,input-type = <EV_SW>;
74 linux,code = <SW_CAMERA_LENS_COVER>;
75 linux,can-disable;
76 };
77
78 camera_focus {
79 label = "Camera Focus";
80 gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; /* 68 */
81 linux,code = <KEY_CAMERA_FOCUS>;
82 linux,can-disable;
83 };
84
85 camera_capture {
86 label = "Camera Capture";
87 gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; /* 69 */
88 linux,code = <KEY_CAMERA>;
89 linux,can-disable;
90 };
91
92 lock_button {
93 label = "Lock Button";
94 gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; /* 113 */
95 linux,code = <KEY_SCREENLOCK>;
96 linux,can-disable;
97 };
98
99 keypad_slide {
100 label = "Keypad Slide";
101 gpios = <&gpio3 7 GPIO_ACTIVE_LOW>; /* 71 */
102 linux,input-type = <EV_SW>;
103 linux,code = <SW_KEYPAD_SLIDE>;
104 linux,can-disable;
105 };
106
107 proximity_sensor {
108 label = "Proximity Sensor";
109 gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>; /* 89 */
110 linux,input-type = <EV_SW>;
111 linux,code = <SW_FRONT_PROXIMITY>;
112 linux,can-disable;
113 };
114
115 machine_cover {
116 label = "Machine Cover";
117 gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; /* 160 */
118 linux,input-type = <EV_SW>;
119 linux,code = <SW_MACHINE_COVER>;
120 linux,can-disable;
121 };
122 };
123
124 isp1707: isp1707 {
125 compatible = "nxp,isp1707";
126 nxp,enable-gpio = <&gpio3 3 GPIO_ACTIVE_HIGH>;
127 usb-phy = <&usb2_phy>;
128 };
129
130 tv: connector {
131 compatible = "composite-video-connector";
132 label = "tv";
133
134 port {
135 tv_connector_in: endpoint {
136 remote-endpoint = <&venc_out>;
137 };
138 };
139 };
140
141 sound: n900-audio {
142 compatible = "nokia,n900-audio";
143
144 nokia,cpu-dai = <&mcbsp2>;
145 nokia,audio-codec = <&tlv320aic3x>, <&tlv320aic3x_aux>;
146 nokia,headphone-amplifier = <&tpa6130a2>;
147
148 tvout-selection-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>; /* 40 */
149 jack-detection-gpios = <&gpio6 17 GPIO_ACTIVE_HIGH>; /* 177 */
150 eci-switch-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* 182 */
151 speaker-amplifier-gpios = <&twl_gpio 7 GPIO_ACTIVE_HIGH>;
152 };
153
154 battery: n900-battery {
155 compatible = "nokia,n900-battery";
156 io-channels = <&twl_madc 0>, <&twl_madc 4>, <&twl_madc 12>;
157 io-channel-names = "temp", "bsi", "vbat";
158 };
159
160 pwm9: pwm-9 {
161 compatible = "ti,omap-dmtimer-pwm";
162 #pwm-cells = <3>;
163 ti,timers = <&timer9>;
164 ti,clock-source = <0x00>; /* timer_sys_ck */
165 };
166
167 ir: n900-ir {
168 compatible = "nokia,n900-ir";
169 pwms = <&pwm9 0 26316 0>; /* 38000 Hz */
170 };
171
172 rom_rng: rng {
173 compatible = "nokia,n900-rom-rng";
174 clocks = <&rng_ick>;
175 clock-names = "ick";
176 };
177
178 /* controlled (enabled/disabled) directly by bcm2048 and wl1251 */
179 vctcxo: vctcxo {
180 compatible = "fixed-clock";
181 #clock-cells = <0>;
182 clock-frequency = <38400000>;
183 };
184};
185
186&isp {
187 vdds_csib-supply = <&vaux2>;
188
189 pinctrl-names = "default";
190 pinctrl-0 = <&camera_pins>;
191
192 ports {
193 port@1 {
194 reg = <1>;
195
196 csi_isp: endpoint {
197 remote-endpoint = <&csi_cam1>;
198 bus-type = <MEDIA_BUS_TYPE_CCP2>;
199 clock-lanes = <1>;
200 data-lanes = <0>;
201 lane-polarity = <0 0>;
202 /* Select strobe = <1> for back camera, <0> for front camera */
203 strobe = <1>;
204 };
205 };
206 };
207};
208
209&omap3_pmx_core {
210 pinctrl-names = "default";
211
212 uart2_pins: uart2-pins {
213 pinctrl-single,pins = <
214 OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts */
215 OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts */
216 OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx */
217 OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx */
218 >;
219 };
220
221 uart3_pins: uart3-pins {
222 pinctrl-single,pins = <
223 OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx */
224 OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx */
225 >;
226 };
227
228 ethernet_pins: ethernet-pins {
229 pinctrl-single,pins = <
230 OMAP3_CORE1_IOPAD(0x20b4, PIN_INPUT_PULLDOWN | MUX_MODE4) /* gpmc_ncs3.gpio_54 */
231 OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE4) /* dss_data16.gpio_86 */
232 OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT | MUX_MODE4) /* uart3_rts_sd.gpio_164 */
233 >;
234 };
235
236 gpmc_pins: gpmc-pins {
237 pinctrl-single,pins = <
238
239 /* address lines */
240 OMAP3_CORE1_IOPAD(0x207a, PIN_OUTPUT | MUX_MODE0) /* gpmc_a1.gpmc_a1 */
241 OMAP3_CORE1_IOPAD(0x207c, PIN_OUTPUT | MUX_MODE0) /* gpmc_a2.gpmc_a2 */
242 OMAP3_CORE1_IOPAD(0x207e, PIN_OUTPUT | MUX_MODE0) /* gpmc_a3.gpmc_a3 */
243
244 /* data lines, gpmc_d0..d7 not muxable according to TRM */
245 OMAP3_CORE1_IOPAD(0x209e, PIN_INPUT | MUX_MODE0) /* gpmc_d8.gpmc_d8 */
246 OMAP3_CORE1_IOPAD(0x20a0, PIN_INPUT | MUX_MODE0) /* gpmc_d9.gpmc_d9 */
247 OMAP3_CORE1_IOPAD(0x20a2, PIN_INPUT | MUX_MODE0) /* gpmc_d10.gpmc_d10 */
248 OMAP3_CORE1_IOPAD(0x20a4, PIN_INPUT | MUX_MODE0) /* gpmc_d11.gpmc_d11 */
249 OMAP3_CORE1_IOPAD(0x20a6, PIN_INPUT | MUX_MODE0) /* gpmc_d12.gpmc_d12 */
250 OMAP3_CORE1_IOPAD(0x20a8, PIN_INPUT | MUX_MODE0) /* gpmc_d13.gpmc_d13 */
251 OMAP3_CORE1_IOPAD(0x20aa, PIN_INPUT | MUX_MODE0) /* gpmc_d14.gpmc_d14 */
252 OMAP3_CORE1_IOPAD(0x20ac, PIN_INPUT | MUX_MODE0) /* gpmc_d15.gpmc_d15 */
253
254 /*
255 * gpmc_ncs0, gpmc_nadv_ale, gpmc_noe, gpmc_nwe, gpmc_wait0 not muxable
256 * according to TRM. OneNAND seems to require PIN_INPUT on clock.
257 */
258 OMAP3_CORE1_IOPAD(0x20b0, PIN_OUTPUT | MUX_MODE0) /* gpmc_ncs1.gpmc_ncs1 */
259 OMAP3_CORE1_IOPAD(0x20be, PIN_INPUT | MUX_MODE0) /* gpmc_clk.gpmc_clk */
260 >;
261 };
262
263 i2c1_pins: i2c1-pins {
264 pinctrl-single,pins = <
265 OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0) /* i2c1_scl */
266 OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0) /* i2c1_sda */
267 >;
268 };
269
270 i2c2_pins: i2c2-pins {
271 pinctrl-single,pins = <
272 OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0) /* i2c2_scl */
273 OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0) /* i2c2_sda */
274 >;
275 };
276
277 i2c3_pins: i2c3-pins {
278 pinctrl-single,pins = <
279 OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0) /* i2c3_scl */
280 OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda */
281 >;
282 };
283
284 debug_leds: debug-led-pins {
285 pinctrl-single,pins = <
286 OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4) /* mcbsp1_clkx.gpio_162 */
287 >;
288 };
289
290 mcspi4_pins: mcspi4-pins {
291 pinctrl-single,pins = <
292 OMAP3_CORE1_IOPAD(0x218c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_clk */
293 OMAP3_CORE1_IOPAD(0x2192, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_somi */
294 OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE1) /* mcspi4_simo */
295 OMAP3_CORE1_IOPAD(0x2196, PIN_OUTPUT | MUX_MODE1) /* mcspi4_cs0 */
296 >;
297 };
298
299 mmc1_pins: mmc1-pins {
300 pinctrl-single,pins = <
301 OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk */
302 OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd */
303 OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0 */
304 OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1 */
305 OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2 */
306 OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3 */
307 >;
308 };
309
310 mmc2_pins: mmc2-pins {
311 pinctrl-single,pins = <
312 OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */
313 OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */
314 OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0 */
315 OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */
316 OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */
317 OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */
318 OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat4 */
319 OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat5 */
320 OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat6 */
321 OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat7 */
322 >;
323 };
324
325 acx565akm_pins: acx565akm-pins {
326 pinctrl-single,pins = <
327 OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE4) /* RX51_LCD_RESET_GPIO */
328 >;
329 };
330
331 dss_sdi_pins: dss-sdi-pins {
332 pinctrl-single,pins = <
333 OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE1) /* dss_data10.sdi_dat1n */
334 OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE1) /* dss_data11.sdi_dat1p */
335 OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE1) /* dss_data12.sdi_dat2n */
336 OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE1) /* dss_data13.sdi_dat2p */
337
338 OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE1) /* dss_data22.sdi_clkp */
339 OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE1) /* dss_data23.sdi_clkn */
340 >;
341 };
342
343 wl1251_pins: wl1251-pins {
344 pinctrl-single,pins = <
345 OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE4) /* gpio 87 => wl1251 enable */
346 OMAP3_CORE1_IOPAD(0x208a, PIN_INPUT | MUX_MODE4) /* gpio 42 => wl1251 irq */
347 >;
348 };
349
350 ssi_pins: ssi-pins {
351 pinctrl-single,pins = <
352 OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLUP | MUX_MODE1) /* ssi1_rdy_tx */
353 OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE1) /* ssi1_flag_tx */
354 OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE4) /* ssi1_wake_tx (cawake) */
355 OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE1) /* ssi1_dat_tx */
356 OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE1) /* ssi1_dat_rx */
357 OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE1) /* ssi1_flag_rx */
358 OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | MUX_MODE1) /* ssi1_rdy_rx */
359 OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | MUX_MODE1) /* ssi1_wake */
360 >;
361 };
362
363 modem_pins: modem-pins {
364 pinctrl-single,pins = <
365 OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE4) /* gpio 70 => cmt_apeslpx */
366 OMAP3_CORE1_IOPAD(0x20e0, PIN_INPUT | MUX_MODE4) /* gpio 72 => ape_rst_rq */
367 OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE4) /* gpio 73 => cmt_rst_rq */
368 OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE4) /* gpio 74 => cmt_en */
369 OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE4) /* gpio 75 => cmt_rst */
370 OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4) /* gpio 157 => cmt_bsi */
371 >;
372 };
373
374 camera_pins: camera-pins {
375 pinctrl-single,pins = <
376 OMAP3_CORE1_IOPAD(0x210c, PIN_OUTPUT | MUX_MODE7) /* cam_hs */
377 OMAP3_CORE1_IOPAD(0x210e, PIN_OUTPUT | MUX_MODE7) /* cam_vs */
378 OMAP3_CORE1_IOPAD(0x2110, PIN_OUTPUT | MUX_MODE0) /* cam_xclka */
379 OMAP3_CORE1_IOPAD(0x211e, PIN_OUTPUT | MUX_MODE7) /* cam_d4 */
380 OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT | MUX_MODE0) /* cam_d6 */
381 OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT | MUX_MODE0) /* cam_d7 */
382 OMAP3_CORE1_IOPAD(0x2126, PIN_INPUT | MUX_MODE0) /* cam_d8 */
383 OMAP3_CORE1_IOPAD(0x2128, PIN_INPUT | MUX_MODE0) /* cam_d9 */
384 OMAP3_CORE1_IOPAD(0x212a, PIN_OUTPUT | MUX_MODE7) /* cam_d10 */
385 OMAP3_CORE1_IOPAD(0x212e, PIN_OUTPUT | MUX_MODE7) /* cam_xclkb */
386 OMAP3_CORE1_IOPAD(0x2132, PIN_OUTPUT | MUX_MODE0) /* cam_strobe */
387 >;
388 };
389};
390
391&i2c1 {
392 pinctrl-names = "default";
393 pinctrl-0 = <&i2c1_pins>;
394
395 clock-frequency = <2200000>;
396
397 twl: twl@48 {
398 reg = <0x48>;
399 interrupts = <7>; /* SYS_NIRQ cascaded to intc */
400 interrupt-parent = <&intc>;
401 };
402};
403
404#include "twl4030.dtsi"
405#include "twl4030_omap3.dtsi"
406
407&vaux1 {
408 regulator-name = "V28";
409 regulator-min-microvolt = <2800000>;
410 regulator-max-microvolt = <2800000>;
411 regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
412 regulator-always-on; /* due to battery cover sensor */
413};
414
415&vaux2 {
416 regulator-name = "VCSI";
417 regulator-min-microvolt = <1800000>;
418 regulator-max-microvolt = <1800000>;
419 regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
420};
421
422&vaux3 {
423 regulator-name = "VMMC2_30";
424 regulator-min-microvolt = <2800000>;
425 regulator-max-microvolt = <3000000>;
426 regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
427};
428
429&vaux4 {
430 regulator-name = "VCAM_ANA_28";
431 regulator-min-microvolt = <2800000>;
432 regulator-max-microvolt = <2800000>;
433 regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
434};
435
436&vmmc1 {
437 regulator-name = "VMMC1";
438 regulator-min-microvolt = <1850000>;
439 regulator-max-microvolt = <3150000>;
440 regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
441};
442
443&vmmc2 {
444 regulator-name = "V28_A";
445 regulator-min-microvolt = <2800000>;
446 regulator-max-microvolt = <3000000>;
447 regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
448 regulator-always-on; /* due VIO leak to AIC34 VDDs */
449};
450
451&vpll1 {
452 regulator-name = "VPLL";
453 regulator-min-microvolt = <1800000>;
454 regulator-max-microvolt = <1800000>;
455 regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
456 regulator-always-on;
457};
458
459&vpll2 {
460 regulator-name = "VSDI_CSI";
461 regulator-min-microvolt = <1800000>;
462 regulator-max-microvolt = <1800000>;
463 regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
464 regulator-always-on;
465};
466
467&vsim {
468 regulator-name = "VMMC2_IO_18";
469 regulator-min-microvolt = <1800000>;
470 regulator-max-microvolt = <1800000>;
471 regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
472};
473
474&vio {
475 regulator-name = "VIO";
476 regulator-min-microvolt = <1800000>;
477 regulator-max-microvolt = <1800000>;
478};
479
480&vintana1 {
481 regulator-name = "VINTANA1";
482 /* fixed to 1500000 */
483 regulator-always-on;
484};
485
486&vintana2 {
487 regulator-name = "VINTANA2";
488 regulator-min-microvolt = <2750000>;
489 regulator-max-microvolt = <2750000>;
490 regulator-always-on;
491};
492
493&vintdig {
494 regulator-name = "VINTDIG";
495 /* fixed to 1500000 */
496 regulator-always-on;
497};
498
499/* First two dma channels are reserved on secure omap3 */
500&sdma {
501 dma-channel-mask = <0xfffffffc>;
502};
503
504&twl {
505 twl_audio: audio {
506 compatible = "ti,twl4030-audio";
507 ti,enable-vibra = <1>;
508 };
509
510 twl_power: power {
511 compatible = "ti,twl4030-power-n900", "ti,twl4030-power-idle-osc-off";
512 ti,use_poweroff;
513 };
514};
515
516&twl_keypad {
517 linux,keymap = < MATRIX_KEY(0x00, 0x00, KEY_Q)
518 MATRIX_KEY(0x00, 0x01, KEY_O)
519 MATRIX_KEY(0x00, 0x02, KEY_P)
520 MATRIX_KEY(0x00, 0x03, KEY_COMMA)
521 MATRIX_KEY(0x00, 0x04, KEY_BACKSPACE)
522 MATRIX_KEY(0x00, 0x06, KEY_A)
523 MATRIX_KEY(0x00, 0x07, KEY_S)
524
525 MATRIX_KEY(0x01, 0x00, KEY_W)
526 MATRIX_KEY(0x01, 0x01, KEY_D)
527 MATRIX_KEY(0x01, 0x02, KEY_F)
528 MATRIX_KEY(0x01, 0x03, KEY_G)
529 MATRIX_KEY(0x01, 0x04, KEY_H)
530 MATRIX_KEY(0x01, 0x05, KEY_J)
531 MATRIX_KEY(0x01, 0x06, KEY_K)
532 MATRIX_KEY(0x01, 0x07, KEY_L)
533
534 MATRIX_KEY(0x02, 0x00, KEY_E)
535 MATRIX_KEY(0x02, 0x01, KEY_DOT)
536 MATRIX_KEY(0x02, 0x02, KEY_UP)
537 MATRIX_KEY(0x02, 0x03, KEY_ENTER)
538 MATRIX_KEY(0x02, 0x05, KEY_Z)
539 MATRIX_KEY(0x02, 0x06, KEY_X)
540 MATRIX_KEY(0x02, 0x07, KEY_C)
541 MATRIX_KEY(0x02, 0x08, KEY_F9)
542
543 MATRIX_KEY(0x03, 0x00, KEY_R)
544 MATRIX_KEY(0x03, 0x01, KEY_V)
545 MATRIX_KEY(0x03, 0x02, KEY_B)
546 MATRIX_KEY(0x03, 0x03, KEY_N)
547 MATRIX_KEY(0x03, 0x04, KEY_M)
548 MATRIX_KEY(0x03, 0x05, KEY_SPACE)
549 MATRIX_KEY(0x03, 0x06, KEY_SPACE)
550 MATRIX_KEY(0x03, 0x07, KEY_LEFT)
551
552 MATRIX_KEY(0x04, 0x00, KEY_T)
553 MATRIX_KEY(0x04, 0x01, KEY_DOWN)
554 MATRIX_KEY(0x04, 0x02, KEY_RIGHT)
555 MATRIX_KEY(0x04, 0x04, KEY_LEFTCTRL)
556 MATRIX_KEY(0x04, 0x05, KEY_RIGHTALT)
557 MATRIX_KEY(0x04, 0x06, KEY_LEFTSHIFT)
558 MATRIX_KEY(0x04, 0x08, KEY_F10)
559
560 MATRIX_KEY(0x05, 0x00, KEY_Y)
561 MATRIX_KEY(0x05, 0x08, KEY_F11)
562
563 MATRIX_KEY(0x06, 0x00, KEY_U)
564
565 MATRIX_KEY(0x07, 0x00, KEY_I)
566 MATRIX_KEY(0x07, 0x01, KEY_F7)
567 MATRIX_KEY(0x07, 0x02, KEY_F8)
568 >;
569};
570
571&twl_gpio {
572 ti,pullups = <0x0>;
573 ti,pulldowns = <0x03ff3f>; /* BIT(0..5) | BIT(8..17) */
574};
575
576&i2c2 {
577 pinctrl-names = "default";
578 pinctrl-0 = <&i2c2_pins>;
579
580 clock-frequency = <100000>;
581
582 tlv320aic3x: tlv320aic3x@18 {
583 compatible = "ti,tlv320aic3x";
584 reg = <0x18>;
585 reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; /* 60 */
586 ai3x-gpio-func = <
587 0 /* AIC3X_GPIO1_FUNC_DISABLED */
588 5 /* AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT */
589 >;
590
591 AVDD-supply = <&vmmc2>;
592 DRVDD-supply = <&vmmc2>;
593 IOVDD-supply = <&vio>;
594 DVDD-supply = <&vio>;
595
596 ai3x-micbias-vg = <1>;
597 };
598
599 tlv320aic3x_aux: tlv320aic3x@19 {
600 compatible = "ti,tlv320aic3x";
601 reg = <0x19>;
602 reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; /* 60 */
603
604 AVDD-supply = <&vmmc2>;
605 DRVDD-supply = <&vmmc2>;
606 IOVDD-supply = <&vio>;
607 DVDD-supply = <&vio>;
608
609 ai3x-micbias-vg = <2>;
610 };
611
612 tsl2563: tsl2563@29 {
613 compatible = "amstaos,tsl2563";
614 reg = <0x29>;
615
616 amstaos,cover-comp-gain = <16>;
617 };
618
619 adp1653: led-controller@30 {
620 compatible = "adi,adp1653";
621 reg = <0x30>;
622 enable-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; /* 88 */
623
624 flash {
625 flash-timeout-us = <500000>;
626 flash-max-microamp = <320000>;
627 led-max-microamp = <50000>;
628 };
629 indicator {
630 led-max-microamp = <17500>;
631 };
632 };
633
634 lp5523: lp5523@32 {
635 #address-cells = <1>;
636 #size-cells = <0>;
637 compatible = "national,lp5523";
638 reg = <0x32>;
639 clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
640 enable-gpios = <&gpio2 9 GPIO_ACTIVE_HIGH>; /* 41 */
641
642 led@0 {
643 reg = <0>;
644 chan-name = "lp5523:kb1";
645 led-cur = /bits/ 8 <50>;
646 max-cur = /bits/ 8 <100>;
647 color = <LED_COLOR_ID_WHITE>;
648 function = LED_FUNCTION_KBD_BACKLIGHT;
649 };
650
651 led@1 {
652 reg = <1>;
653 chan-name = "lp5523:kb2";
654 led-cur = /bits/ 8 <50>;
655 max-cur = /bits/ 8 <100>;
656 color = <LED_COLOR_ID_WHITE>;
657 function = LED_FUNCTION_KBD_BACKLIGHT;
658 };
659
660 led@2 {
661 reg = <2>;
662 chan-name = "lp5523:kb3";
663 led-cur = /bits/ 8 <50>;
664 max-cur = /bits/ 8 <100>;
665 color = <LED_COLOR_ID_WHITE>;
666 function = LED_FUNCTION_KBD_BACKLIGHT;
667 };
668
669 led@3 {
670 reg = <3>;
671 chan-name = "lp5523:kb4";
672 led-cur = /bits/ 8 <50>;
673 max-cur = /bits/ 8 <100>;
674 color = <LED_COLOR_ID_WHITE>;
675 function = LED_FUNCTION_KBD_BACKLIGHT;
676 };
677
678 led@4 {
679 reg = <4>;
680 chan-name = "lp5523:b";
681 led-cur = /bits/ 8 <50>;
682 max-cur = /bits/ 8 <100>;
683 color = <LED_COLOR_ID_BLUE>;
684 function = LED_FUNCTION_STATUS;
685 };
686
687 led@5 {
688 reg = <5>;
689 chan-name = "lp5523:g";
690 led-cur = /bits/ 8 <50>;
691 max-cur = /bits/ 8 <100>;
692 color = <LED_COLOR_ID_GREEN>;
693 function = LED_FUNCTION_STATUS;
694 };
695
696 led@6 {
697 reg = <6>;
698 chan-name = "lp5523:r";
699 led-cur = /bits/ 8 <50>;
700 max-cur = /bits/ 8 <100>;
701 color = <LED_COLOR_ID_RED>;
702 function = LED_FUNCTION_STATUS;
703 };
704
705 led@7 {
706 reg = <7>;
707 chan-name = "lp5523:kb5";
708 led-cur = /bits/ 8 <50>;
709 max-cur = /bits/ 8 <100>;
710 color = <LED_COLOR_ID_WHITE>;
711 function = LED_FUNCTION_KBD_BACKLIGHT;
712 };
713
714 led@8 {
715 reg = <8>;
716 chan-name = "lp5523:kb6";
717 led-cur = /bits/ 8 <50>;
718 max-cur = /bits/ 8 <100>;
719 color = <LED_COLOR_ID_WHITE>;
720 function = LED_FUNCTION_KBD_BACKLIGHT;
721 };
722 };
723
724 bq27200: bq27200@55 {
725 compatible = "ti,bq27200";
726 reg = <0x55>;
727 power-supplies = <&bq24150a>;
728 };
729
730 /* Stereo headphone amplifier */
731 tpa6130a2: tpa6130a2@60 {
732 compatible = "ti,tpa6130a2";
733 reg = <0x60>;
734
735 Vdd-supply = <&vmmc2>;
736
737 power-gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>; /* 98 */
738 };
739
740 si4713: si4713@63 {
741 compatible = "silabs,si4713";
742 reg = <0x63>;
743
744 interrupts-extended = <&gpio2 21 IRQ_TYPE_EDGE_FALLING>; /* 53 */
745 reset-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* 163 */
746 vio-supply = <&vio>;
747 vdd-supply = <&vaux1>;
748 };
749
750 bq24150a: bq24150a@6b {
751 compatible = "ti,bq24150a";
752 reg = <0x6b>;
753
754 ti,current-limit = <100>;
755 ti,weak-battery-voltage = <3400>;
756 ti,battery-regulation-voltage = <4200>;
757 ti,charge-current = <650>;
758 ti,termination-current = <100>;
759 ti,resistor-sense = <68>;
760
761 ti,usb-charger-detection = <&isp1707>;
762 };
763};
764
765&i2c3 {
766 pinctrl-names = "default";
767 pinctrl-0 = <&i2c3_pins>;
768
769 clock-frequency = <400000>;
770
771 accelerometer@1d {
772 compatible = "st,lis302dl";
773 reg = <0x1d>;
774
775 vdd-supply = <&vaux1>;
776 vddio-supply = <&vio>;
777
778 interrupt-parent = <&gpio6>;
779 interrupts = <21 IRQ_TYPE_EDGE_RISING>,
780 <20 IRQ_TYPE_EDGE_RISING>; /* 181 and 180 */
781
782 mount-matrix = "-1", "0", "0",
783 "0", "1", "0",
784 "0", "0", "1";
785 };
786
787 cam1: camera@3e {
788 compatible = "toshiba,et8ek8";
789 reg = <0x3e>;
790
791 vana-supply = <&vaux4>;
792
793 clocks = <&isp 0>;
794 clock-names = "extclk";
795 clock-frequency = <9600000>;
796
797 reset-gpio = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 */
798
799 lens-focus = <&ad5820>;
800
801 port {
802 csi_cam1: endpoint {
803 bus-type = <MEDIA_BUS_TYPE_CCP2>;
804 strobe = <1>;
805 clock-inv = <0>;
806 crc = <1>;
807
808 remote-endpoint = <&csi_isp>;
809 };
810 };
811 };
812
813 /* D/A converter for auto-focus */
814 ad5820: dac@c {
815 compatible = "adi,ad5820";
816 reg = <0x0c>;
817
818 VANA-supply = <&vaux4>;
819
820 #io-channel-cells = <0>;
821 };
822};
823
824&mmc1 {
825 pinctrl-names = "default";
826 pinctrl-0 = <&mmc1_pins>;
827 vmmc-supply = <&vmmc1>;
828 bus-width = <4>;
829};
830
831/* most boards use vaux3, only some old versions use vmmc2 instead */
832&mmc2 {
833 pinctrl-names = "default";
834 pinctrl-0 = <&mmc2_pins>;
835 vmmc-supply = <&vaux3>;
836 vqmmc-supply = <&vsim>;
837 bus-width = <8>;
838 non-removable;
839 no-sdio;
840 no-sd;
841};
842
843&mmc3 {
844 status = "disabled";
845};
846
847&gpmc {
848 ranges = <0 0 0x01000000 0x01000000>, /* 16 MB for OneNAND */
849 <1 0 0x02000000 0x01000000>; /* 16 MB for smc91c96 */
850 pinctrl-names = "default";
851 pinctrl-0 = <&gpmc_pins>;
852
853 /* sys_ndmareq1 could be used by the driver, not as gpio65 though */
854 onenand@0,0 {
855 #address-cells = <1>;
856 #size-cells = <1>;
857 compatible = "ti,omap2-onenand";
858 reg = <0 0 0x20000>; /* CS0, offset 0, IO size 128K */
859
860 /*
861 * These timings are based on CONFIG_OMAP_GPMC_DEBUG=y reported
862 * bootloader set values when booted with v5.1
863 * (OneNAND Manufacturer: Samsung):
864 *
865 * cs0 GPMC_CS_CONFIG1: 0xfb001202
866 * cs0 GPMC_CS_CONFIG2: 0x00111100
867 * cs0 GPMC_CS_CONFIG3: 0x00020200
868 * cs0 GPMC_CS_CONFIG4: 0x11001102
869 * cs0 GPMC_CS_CONFIG5: 0x03101616
870 * cs0 GPMC_CS_CONFIG6: 0x90060000
871 */
872 gpmc,sync-read;
873 gpmc,sync-write;
874 gpmc,burst-length = <16>;
875 gpmc,burst-read;
876 gpmc,burst-wrap;
877 gpmc,burst-write;
878 gpmc,device-width = <2>;
879 gpmc,mux-add-data = <2>;
880 gpmc,cs-on-ns = <0>;
881 gpmc,cs-rd-off-ns = <102>;
882 gpmc,cs-wr-off-ns = <102>;
883 gpmc,adv-on-ns = <0>;
884 gpmc,adv-rd-off-ns = <12>;
885 gpmc,adv-wr-off-ns = <12>;
886 gpmc,oe-on-ns = <12>;
887 gpmc,oe-off-ns = <102>;
888 gpmc,we-on-ns = <0>;
889 gpmc,we-off-ns = <102>;
890 gpmc,rd-cycle-ns = <132>;
891 gpmc,wr-cycle-ns = <132>;
892 gpmc,access-ns = <96>;
893 gpmc,page-burst-access-ns = <18>;
894 gpmc,bus-turnaround-ns = <0>;
895 gpmc,cycle2cycle-delay-ns = <0>;
896 gpmc,wait-monitoring-ns = <0>;
897 gpmc,clk-activation-ns = <6>;
898 gpmc,wr-data-mux-bus-ns = <36>;
899 gpmc,wr-access-ns = <96>;
900 gpmc,sync-clk-ps = <15000>;
901
902 /*
903 * MTD partition table corresponding to Nokia's
904 * Maemo 5 (Fremantle) release.
905 */
906 partition@0 {
907 label = "bootloader";
908 reg = <0x00000000 0x00020000>;
909 read-only;
910 };
911 partition@1 {
912 label = "config";
913 reg = <0x00020000 0x00060000>;
914 };
915 partition@2 {
916 label = "log";
917 reg = <0x00080000 0x00040000>;
918 };
919 partition@3 {
920 label = "kernel";
921 reg = <0x000c0000 0x00200000>;
922 };
923 partition@4 {
924 label = "initfs";
925 reg = <0x002c0000 0x00200000>;
926 };
927 partition@5 {
928 label = "rootfs";
929 reg = <0x004c0000 0x0fb40000>;
930 };
931 };
932
933 /* Ethernet is on some early development boards and qemu */
934 ethernet@gpmc {
935 compatible = "smsc,lan91c94";
936 interrupt-parent = <&gpio2>;
937 interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; /* gpio54 */
938 reg = <1 0 0xf>; /* 16 byte IO range */
939 bank-width = <2>;
940 pinctrl-names = "default";
941 pinctrl-0 = <&ethernet_pins>;
942 power-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; /* gpio86 */
943 reset-gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>; /* gpio164 */
944 gpmc,device-width = <2>;
945 gpmc,sync-clk-ps = <0>;
946 gpmc,cs-on-ns = <0>;
947 gpmc,cs-rd-off-ns = <48>;
948 gpmc,cs-wr-off-ns = <24>;
949 gpmc,adv-on-ns = <0>;
950 gpmc,adv-rd-off-ns = <0>;
951 gpmc,adv-wr-off-ns = <0>;
952 gpmc,we-on-ns = <12>;
953 gpmc,we-off-ns = <18>;
954 gpmc,oe-on-ns = <12>;
955 gpmc,oe-off-ns = <48>;
956 gpmc,page-burst-access-ns = <0>;
957 gpmc,access-ns = <42>;
958 gpmc,rd-cycle-ns = <180>;
959 gpmc,wr-cycle-ns = <180>;
960 gpmc,bus-turnaround-ns = <0>;
961 gpmc,cycle2cycle-delay-ns = <0>;
962 gpmc,wait-monitoring-ns = <0>;
963 gpmc,clk-activation-ns = <0>;
964 gpmc,wr-access-ns = <0>;
965 gpmc,wr-data-mux-bus-ns = <12>;
966 };
967};
968
969&mcspi1 {
970 /*
971 * For some reason, touchscreen is necessary for screen to work at
972 * all on real hw. It works well without it on emulator.
973 *
974 * Also... order in the device tree actually matters here.
975 */
976 tsc2005@0 {
977 compatible = "ti,tsc2005";
978 spi-max-frequency = <6000000>;
979 reg = <0>;
980
981 vio-supply = <&vio>;
982
983 reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */
984 interrupts-extended = <&gpio4 4 IRQ_TYPE_EDGE_RISING>; /* 100 */
985
986 touchscreen-fuzz-x = <4>;
987 touchscreen-fuzz-y = <7>;
988 touchscreen-fuzz-pressure = <2>;
989 touchscreen-size-x = <4096>;
990 touchscreen-size-y = <4096>;
991 touchscreen-max-pressure = <2048>;
992
993 ti,x-plate-ohms = <280>;
994 ti,esd-recovery-timeout-ms = <8000>;
995 };
996
997 lcd: acx565akm@2 {
998 compatible = "sony,acx565akm";
999 spi-max-frequency = <6000000>;
1000 reg = <2>;
1001
1002 pinctrl-names = "default";
1003 pinctrl-0 = <&acx565akm_pins>;
1004
1005 label = "lcd";
1006 reset-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* 90 */
1007
1008 port {
1009 lcd_in: endpoint {
1010 remote-endpoint = <&sdi_out>;
1011 };
1012 };
1013 };
1014};
1015
1016&mcspi4 {
1017 pinctrl-names = "default";
1018 pinctrl-0 = <&mcspi4_pins>;
1019
1020 wl1251@0 {
1021 pinctrl-names = "default";
1022 pinctrl-0 = <&wl1251_pins>;
1023
1024 vio-supply = <&vio>;
1025
1026 compatible = "ti,wl1251";
1027 reg = <0>;
1028 spi-max-frequency = <48000000>;
1029
1030 spi-cpol;
1031 spi-cpha;
1032
1033 ti,power-gpio = <&gpio3 23 GPIO_ACTIVE_HIGH>; /* 87 */
1034
1035 interrupt-parent = <&gpio2>;
1036 interrupts = <10 IRQ_TYPE_NONE>; /* gpio line 42 */
1037
1038 clocks = <&vctcxo>;
1039 };
1040};
1041
1042/* RNG not directly accessible on n900, see omap3-rom-rng instead */
1043&rng_target {
1044 status = "disabled";
1045};
1046
1047&usb_otg_hs {
1048 interface-type = <0>;
1049 usb-phy = <&usb2_phy>;
1050 phys = <&usb2_phy>;
1051 phy-names = "usb2-phy";
1052 mode = <2>;
1053 power = <50>;
1054};
1055
1056&uart1 {
1057 status = "disabled";
1058};
1059
1060&uart2 {
1061 pinctrl-names = "default";
1062 pinctrl-0 = <&uart2_pins>;
1063
1064 bcm2048: bluetooth {
1065 compatible = "brcm,bcm2048-nokia", "nokia,h4p-bluetooth";
1066 reset-gpios = <&gpio3 27 GPIO_ACTIVE_LOW>; /* 91 */
1067 host-wakeup-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* 101 */
1068 bluetooth-wakeup-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; /* 37 */
1069 clocks = <&vctcxo>;
1070 clock-names = "sysclk";
1071 };
1072};
1073
1074&uart3 {
1075 interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
1076 pinctrl-names = "default";
1077 pinctrl-0 = <&uart3_pins>;
1078};
1079
1080&dss {
1081 status = "okay";
1082
1083 pinctrl-names = "default";
1084 pinctrl-0 = <&dss_sdi_pins>;
1085
1086 vdds_sdi-supply = <&vaux1>;
1087
1088 ports {
1089 #address-cells = <1>;
1090 #size-cells = <0>;
1091
1092 port@1 {
1093 reg = <1>;
1094
1095 sdi_out: endpoint {
1096 remote-endpoint = <&lcd_in>;
1097 datapairs = <2>;
1098 };
1099 };
1100 };
1101};
1102
1103&venc {
1104 status = "okay";
1105
1106 vdda-supply = <&vdac>;
1107
1108 port {
1109 venc_out: endpoint {
1110 remote-endpoint = <&tv_connector_in>;
1111 ti,channels = <1>;
1112 };
1113 };
1114};
1115
1116&mcbsp2 {
1117 status = "okay";
1118};
1119
1120&ssi_port1 {
1121 pinctrl-names = "default";
1122 pinctrl-0 = <&ssi_pins>;
1123
1124 ti,ssi-cawake-gpio = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* 151 */
1125
1126 modem: hsi-client {
1127 compatible = "nokia,n900-modem";
1128
1129 pinctrl-names = "default";
1130 pinctrl-0 = <&modem_pins>;
1131
1132 hsi-channel-ids = <0>, <1>, <2>, <3>;
1133 hsi-channel-names = "mcsaab-control",
1134 "speech-control",
1135 "speech-data",
1136 "mcsaab-data";
1137 hsi-speed-kbps = <55000>;
1138 hsi-mode = "frame";
1139 hsi-flow = "synchronized";
1140 hsi-arb-mode = "round-robin";
1141
1142 interrupts-extended = <&gpio3 8 IRQ_TYPE_EDGE_FALLING>; /* 72 */
1143
1144 gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>, /* 70 */
1145 <&gpio3 9 GPIO_ACTIVE_HIGH>, /* 73 */
1146 <&gpio3 10 GPIO_ACTIVE_HIGH>, /* 74 */
1147 <&gpio3 11 GPIO_ACTIVE_HIGH>, /* 75 */
1148 <&gpio5 29 GPIO_ACTIVE_HIGH>; /* 157 */
1149 gpio-names = "cmt_apeslpx",
1150 "cmt_rst_rq",
1151 "cmt_en",
1152 "cmt_rst",
1153 "cmt_bsi";
1154 };
1155};
1156
1157&ssi_port2 {
1158 status = "disabled";
1159};