| Yuantian Tang | 92f18ff | 2019-04-10 16:43:34 +0800 | [diff] [blame] | 1 | /* SPDX-License-Identifier: GPL-2.0+ */ |
| 2 | /* |
| 3 | * Copyright 2019 NXP |
| 4 | */ |
| 5 | |
| 6 | #ifndef __LS1028A_RDB_H |
| 7 | #define __LS1028A_RDB_H |
| 8 | |
| 9 | #include "ls1028a_common.h" |
| 10 | |
| 11 | #define CONFIG_SYS_CLK_FREQ 100000000 |
| 12 | #define CONFIG_DDR_CLK_FREQ 100000000 |
| 13 | #define COUNTER_FREQUENCY_REAL (CONFIG_SYS_CLK_FREQ / 4) |
| 14 | |
| 15 | #define CONFIG_SYS_RTC_BUS_NUM 0 |
| 16 | |
| 17 | /* Store environment at top of flash */ |
| 18 | #define CONFIG_ENV_SIZE 0x2000 |
| 19 | |
| 20 | #define CONFIG_DIMM_SLOTS_PER_CTLR 1 |
| 21 | |
| 22 | #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE |
| 23 | |
| 24 | #define CONFIG_QIXIS_I2C_ACCESS |
| Yuantian Tang | 92f18ff | 2019-04-10 16:43:34 +0800 | [diff] [blame] | 25 | |
| 26 | /* |
| 27 | * QIXIS Definitions |
| 28 | */ |
| 29 | #define CONFIG_FSL_QIXIS |
| 30 | |
| 31 | #ifdef CONFIG_FSL_QIXIS |
| 32 | #define QIXIS_BASE 0x7fb00000 |
| 33 | #define QIXIS_BASE_PHYS QIXIS_BASE |
| 34 | #define CONFIG_SYS_I2C_FPGA_ADDR 0x66 |
| 35 | #define QIXIS_LBMAP_SWITCH 2 |
| 36 | #define QIXIS_LBMAP_MASK 0xe0 |
| 37 | #define QIXIS_LBMAP_SHIFT 0x5 |
| 38 | #define QIXIS_LBMAP_DFLTBANK 0x00 |
| 39 | #define QIXIS_LBMAP_ALTBANK 0x00 |
| 40 | #define QIXIS_LBMAP_SD 0x00 |
| 41 | #define QIXIS_LBMAP_EMMC 0x00 |
| 42 | #define QIXIS_LBMAP_QSPI 0x00 |
| 43 | #define QIXIS_RCW_SRC_SD 0xf8 |
| 44 | #define QIXIS_RCW_SRC_EMMC 0xf9 |
| 45 | #define QIXIS_RCW_SRC_QSPI 0xff |
| 46 | #define QIXIS_RST_CTL_RESET 0x31 |
| 47 | #define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x10 |
| 48 | #define QIXIS_RCFG_CTL_RECONFIG_START 0x11 |
| 49 | #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 |
| 50 | #define QIXIS_RST_FORCE_MEM 0x01 |
| 51 | |
| 52 | #define CONFIG_SYS_FPGA_CSPR_EXT (0x0) |
| 53 | #define CONFIG_SYS_FPGA_CSPR (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) | \ |
| 54 | CSPR_PORT_SIZE_8 | \ |
| 55 | CSPR_MSEL_GPCM | \ |
| 56 | CSPR_V) |
| 57 | #define CONFIG_SYS_FPGA_CSOR (CSOR_NOR_ADM_SHIFT(4) | \ |
| 58 | CSOR_NOR_NOR_MODE_AVD_NOR | \ |
| 59 | CSOR_NOR_TRHZ_80) |
| 60 | #endif |
| 61 | |
| 62 | /* SATA */ |
| 63 | #ifndef CONFIG_CMD_EXT2 |
| 64 | #define CONFIG_CMD_EXT2 |
| 65 | #endif |
| 66 | #define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 |
| 67 | #define CONFIG_SYS_SCSI_MAX_LUN 1 |
| 68 | #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ |
| 69 | CONFIG_SYS_SCSI_MAX_LUN) |
| 70 | #define SCSI_VEND_ID 0x1b4b |
| 71 | #define SCSI_DEV_ID 0x9170 |
| 72 | #define CONFIG_SCSI_DEV_LIST {SCSI_VEND_ID, SCSI_DEV_ID} |
| 73 | #define CONFIG_SCSI_AHCI_PLAT |
| 74 | #define CONFIG_SYS_SATA1 AHCI_BASE_ADDR1 |
| 75 | |
| 76 | #endif /* __LS1028A_RDB_H */ |