Tom Rini | 10e4779 | 2018-05-06 17:58:06 -0400 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0 |
Simon Glass | dec49b7 | 2016-03-11 22:07:30 -0700 | [diff] [blame] | 2 | /* |
| 3 | * From coreboot src/soc/intel/broadwell/igd.c |
| 4 | * |
| 5 | * Copyright (C) 2016 Google, Inc |
Simon Glass | dec49b7 | 2016-03-11 22:07:30 -0700 | [diff] [blame] | 6 | */ |
| 7 | |
| 8 | #include <common.h> |
| 9 | #include <bios_emul.h> |
| 10 | #include <dm.h> |
Simon Glass | d0e1c34 | 2019-12-28 10:44:56 -0700 | [diff] [blame] | 11 | #include <init.h> |
Simon Glass | dec49b7 | 2016-03-11 22:07:30 -0700 | [diff] [blame] | 12 | #include <vbe.h> |
| 13 | #include <video.h> |
Simon Glass | dec49b7 | 2016-03-11 22:07:30 -0700 | [diff] [blame] | 14 | #include <asm/cpu.h> |
| 15 | #include <asm/intel_regs.h> |
| 16 | #include <asm/io.h> |
| 17 | #include <asm/mtrr.h> |
| 18 | #include <asm/arch/cpu.h> |
| 19 | #include <asm/arch/iomap.h> |
| 20 | #include <asm/arch/pch.h> |
Simon Glass | dec49b7 | 2016-03-11 22:07:30 -0700 | [diff] [blame] | 21 | #include "i915_reg.h" |
| 22 | |
| 23 | struct broadwell_igd_priv { |
Simon Glass | dec49b7 | 2016-03-11 22:07:30 -0700 | [diff] [blame] | 24 | u8 *regs; |
| 25 | }; |
| 26 | |
| 27 | struct broadwell_igd_plat { |
| 28 | u32 dp_hotplug[3]; |
| 29 | |
| 30 | int port_select; |
| 31 | int power_up_delay; |
| 32 | int power_backlight_on_delay; |
| 33 | int power_down_delay; |
| 34 | int power_backlight_off_delay; |
| 35 | int power_cycle_delay; |
| 36 | int cpu_backlight; |
| 37 | int pch_backlight; |
| 38 | int cdclk; |
| 39 | int pre_graphics_delay; |
| 40 | }; |
| 41 | |
| 42 | #define GT_RETRY 1000 |
| 43 | #define GT_CDCLK_337 0 |
| 44 | #define GT_CDCLK_450 1 |
| 45 | #define GT_CDCLK_540 2 |
| 46 | #define GT_CDCLK_675 3 |
| 47 | |
| 48 | u32 board_map_oprom_vendev(u32 vendev) |
| 49 | { |
| 50 | return SA_IGD_OPROM_VENDEV; |
| 51 | } |
| 52 | |
| 53 | static int poll32(u8 *addr, uint mask, uint value) |
| 54 | { |
| 55 | ulong start; |
| 56 | |
| 57 | start = get_timer(0); |
| 58 | debug("%s: addr %p = %x\n", __func__, addr, readl(addr)); |
| 59 | while ((readl(addr) & mask) != value) { |
| 60 | if (get_timer(start) > GT_RETRY) { |
| 61 | debug("poll32: timeout: %x\n", readl(addr)); |
| 62 | return -ETIMEDOUT; |
| 63 | } |
| 64 | } |
| 65 | |
| 66 | return 0; |
| 67 | } |
| 68 | |
| 69 | static int haswell_early_init(struct udevice *dev) |
| 70 | { |
| 71 | struct broadwell_igd_priv *priv = dev_get_priv(dev); |
| 72 | u8 *regs = priv->regs; |
| 73 | int ret; |
| 74 | |
| 75 | /* Enable Force Wake */ |
| 76 | writel(0x00000020, regs + 0xa180); |
| 77 | writel(0x00010001, regs + 0xa188); |
| 78 | ret = poll32(regs + 0x130044, 1, 1); |
| 79 | if (ret) |
| 80 | goto err; |
| 81 | |
| 82 | /* Enable Counters */ |
| 83 | setbits_le32(regs + 0xa248, 0x00000016); |
| 84 | |
| 85 | /* GFXPAUSE settings */ |
| 86 | writel(0x00070020, regs + 0xa000); |
| 87 | |
| 88 | /* ECO Settings */ |
| 89 | clrsetbits_le32(regs + 0xa180, ~0xff3fffff, 0x15000000); |
| 90 | |
| 91 | /* Enable DOP Clock Gating */ |
| 92 | writel(0x000003fd, regs + 0x9424); |
| 93 | |
| 94 | /* Enable Unit Level Clock Gating */ |
| 95 | writel(0x00000080, regs + 0x9400); |
| 96 | writel(0x40401000, regs + 0x9404); |
| 97 | writel(0x00000000, regs + 0x9408); |
| 98 | writel(0x02000001, regs + 0x940c); |
| 99 | |
| 100 | /* |
| 101 | * RC6 Settings |
| 102 | */ |
| 103 | |
| 104 | /* Wake Rate Limits */ |
| 105 | setbits_le32(regs + 0xa090, 0x00000000); |
| 106 | setbits_le32(regs + 0xa098, 0x03e80000); |
| 107 | setbits_le32(regs + 0xa09c, 0x00280000); |
| 108 | setbits_le32(regs + 0xa0a8, 0x0001e848); |
| 109 | setbits_le32(regs + 0xa0ac, 0x00000019); |
| 110 | |
| 111 | /* Render/Video/Blitter Idle Max Count */ |
| 112 | writel(0x0000000a, regs + 0x02054); |
| 113 | writel(0x0000000a, regs + 0x12054); |
| 114 | writel(0x0000000a, regs + 0x22054); |
| 115 | writel(0x0000000a, regs + 0x1a054); |
| 116 | |
| 117 | /* RC Sleep / RCx Thresholds */ |
| 118 | setbits_le32(regs + 0xa0b0, 0x00000000); |
| 119 | setbits_le32(regs + 0xa0b4, 0x000003e8); |
| 120 | setbits_le32(regs + 0xa0b8, 0x0000c350); |
| 121 | |
| 122 | /* RP Settings */ |
| 123 | setbits_le32(regs + 0xa010, 0x000f4240); |
| 124 | setbits_le32(regs + 0xa014, 0x12060000); |
| 125 | setbits_le32(regs + 0xa02c, 0x0000e808); |
| 126 | setbits_le32(regs + 0xa030, 0x0003bd08); |
| 127 | setbits_le32(regs + 0xa068, 0x000101d0); |
| 128 | setbits_le32(regs + 0xa06c, 0x00055730); |
| 129 | setbits_le32(regs + 0xa070, 0x0000000a); |
| 130 | |
| 131 | /* RP Control */ |
| 132 | writel(0x00000b92, regs + 0xa024); |
| 133 | |
| 134 | /* HW RC6 Control */ |
| 135 | writel(0x88040000, regs + 0xa090); |
| 136 | |
| 137 | /* Video Frequency Request */ |
| 138 | writel(0x08000000, regs + 0xa00c); |
| 139 | |
| 140 | /* Set RC6 VIDs */ |
| 141 | ret = poll32(regs + 0x138124, (1 << 31), 0); |
| 142 | if (ret) |
| 143 | goto err; |
| 144 | writel(0, regs + 0x138128); |
| 145 | writel(0x80000004, regs + 0x138124); |
| 146 | ret = poll32(regs + 0x138124, (1 << 31), 0); |
| 147 | if (ret) |
| 148 | goto err; |
| 149 | |
| 150 | /* Enable PM Interrupts */ |
| 151 | writel(0x03000076, regs + 0x4402c); |
| 152 | |
| 153 | /* Enable RC6 in idle */ |
| 154 | writel(0x00040000, regs + 0xa094); |
| 155 | |
| 156 | return 0; |
| 157 | err: |
| 158 | debug("%s: ret=%d\n", __func__, ret); |
| 159 | return ret; |
| 160 | }; |
| 161 | |
| 162 | static int haswell_late_init(struct udevice *dev) |
| 163 | { |
| 164 | struct broadwell_igd_priv *priv = dev_get_priv(dev); |
| 165 | u8 *regs = priv->regs; |
| 166 | int ret; |
| 167 | |
| 168 | /* Lock settings */ |
| 169 | setbits_le32(regs + 0x0a248, (1 << 31)); |
| 170 | setbits_le32(regs + 0x0a004, (1 << 4)); |
| 171 | setbits_le32(regs + 0x0a080, (1 << 2)); |
| 172 | setbits_le32(regs + 0x0a180, (1 << 31)); |
| 173 | |
| 174 | /* Disable Force Wake */ |
| 175 | writel(0x00010000, regs + 0xa188); |
| 176 | ret = poll32(regs + 0x130044, 1, 0); |
| 177 | if (ret) |
| 178 | goto err; |
| 179 | writel(0x00000001, regs + 0xa188); |
| 180 | |
| 181 | /* Enable power well for DP and Audio */ |
| 182 | setbits_le32(regs + 0x45400, (1 << 31)); |
| 183 | ret = poll32(regs + 0x45400, 1 << 30, 1 << 30); |
| 184 | if (ret) |
| 185 | goto err; |
| 186 | |
| 187 | return 0; |
| 188 | err: |
| 189 | debug("%s: ret=%d\n", __func__, ret); |
| 190 | return ret; |
| 191 | }; |
| 192 | |
| 193 | static int broadwell_early_init(struct udevice *dev) |
| 194 | { |
| 195 | struct broadwell_igd_priv *priv = dev_get_priv(dev); |
| 196 | u8 *regs = priv->regs; |
| 197 | int ret; |
| 198 | |
| 199 | /* Enable Force Wake */ |
| 200 | writel(0x00010001, regs + 0xa188); |
| 201 | ret = poll32(regs + 0x130044, 1, 1); |
| 202 | if (ret) |
| 203 | goto err; |
| 204 | |
| 205 | /* Enable push bus metric control and shift */ |
| 206 | writel(0x00000004, regs + 0xa248); |
| 207 | writel(0x000000ff, regs + 0xa250); |
| 208 | writel(0x00000010, regs + 0xa25c); |
| 209 | |
| 210 | /* GFXPAUSE settings (set based on stepping) */ |
| 211 | |
| 212 | /* ECO Settings */ |
| 213 | writel(0x45200000, regs + 0xa180); |
| 214 | |
| 215 | /* Enable DOP Clock Gating */ |
| 216 | writel(0x000000fd, regs + 0x9424); |
| 217 | |
| 218 | /* Enable Unit Level Clock Gating */ |
| 219 | writel(0x00000000, regs + 0x9400); |
| 220 | writel(0x40401000, regs + 0x9404); |
| 221 | writel(0x00000000, regs + 0x9408); |
| 222 | writel(0x02000001, regs + 0x940c); |
| 223 | writel(0x0000000a, regs + 0x1a054); |
| 224 | |
| 225 | /* Video Frequency Request */ |
| 226 | writel(0x08000000, regs + 0xa00c); |
| 227 | |
| 228 | writel(0x00000009, regs + 0x138158); |
| 229 | writel(0x0000000d, regs + 0x13815c); |
| 230 | |
| 231 | /* |
| 232 | * RC6 Settings |
| 233 | */ |
| 234 | |
| 235 | /* Wake Rate Limits */ |
| 236 | clrsetbits_le32(regs + 0x0a090, ~0, 0); |
| 237 | setbits_le32(regs + 0x0a098, 0x03e80000); |
| 238 | setbits_le32(regs + 0x0a09c, 0x00280000); |
| 239 | setbits_le32(regs + 0x0a0a8, 0x0001e848); |
| 240 | setbits_le32(regs + 0x0a0ac, 0x00000019); |
| 241 | |
| 242 | /* Render/Video/Blitter Idle Max Count */ |
| 243 | writel(0x0000000a, regs + 0x02054); |
| 244 | writel(0x0000000a, regs + 0x12054); |
| 245 | writel(0x0000000a, regs + 0x22054); |
| 246 | |
| 247 | /* RC Sleep / RCx Thresholds */ |
| 248 | setbits_le32(regs + 0x0a0b0, 0x00000000); |
| 249 | setbits_le32(regs + 0x0a0b8, 0x00000271); |
| 250 | |
| 251 | /* RP Settings */ |
| 252 | setbits_le32(regs + 0x0a010, 0x000f4240); |
| 253 | setbits_le32(regs + 0x0a014, 0x12060000); |
| 254 | setbits_le32(regs + 0x0a02c, 0x0000e808); |
| 255 | setbits_le32(regs + 0x0a030, 0x0003bd08); |
| 256 | setbits_le32(regs + 0x0a068, 0x000101d0); |
| 257 | setbits_le32(regs + 0x0a06c, 0x00055730); |
| 258 | setbits_le32(regs + 0x0a070, 0x0000000a); |
| 259 | setbits_le32(regs + 0x0a168, 0x00000006); |
| 260 | |
| 261 | /* RP Control */ |
| 262 | writel(0x00000b92, regs + 0xa024); |
| 263 | |
| 264 | /* HW RC6 Control */ |
| 265 | writel(0x90040000, regs + 0xa090); |
| 266 | |
| 267 | /* Set RC6 VIDs */ |
| 268 | ret = poll32(regs + 0x138124, (1 << 31), 0); |
| 269 | if (ret) |
| 270 | goto err; |
| 271 | writel(0, regs + 0x138128); |
| 272 | writel(0x80000004, regs + 0x138124); |
| 273 | ret = poll32(regs + 0x138124, (1 << 31), 0); |
| 274 | if (ret) |
| 275 | goto err; |
| 276 | |
| 277 | /* Enable PM Interrupts */ |
| 278 | writel(0x03000076, regs + 0x4402c); |
| 279 | |
| 280 | /* Enable RC6 in idle */ |
| 281 | writel(0x00040000, regs + 0xa094); |
| 282 | |
| 283 | return 0; |
| 284 | err: |
| 285 | debug("%s: ret=%d\n", __func__, ret); |
| 286 | return ret; |
| 287 | } |
| 288 | |
| 289 | static int broadwell_late_init(struct udevice *dev) |
| 290 | { |
| 291 | struct broadwell_igd_priv *priv = dev_get_priv(dev); |
| 292 | u8 *regs = priv->regs; |
| 293 | int ret; |
| 294 | |
| 295 | /* Lock settings */ |
| 296 | setbits_le32(regs + 0x0a248, 1 << 31); |
| 297 | setbits_le32(regs + 0x0a000, 1 << 18); |
| 298 | setbits_le32(regs + 0x0a180, 1 << 31); |
| 299 | |
| 300 | /* Disable Force Wake */ |
| 301 | writel(0x00010000, regs + 0xa188); |
| 302 | ret = poll32(regs + 0x130044, 1, 0); |
| 303 | if (ret) |
| 304 | goto err; |
| 305 | |
| 306 | /* Enable power well for DP and Audio */ |
| 307 | setbits_le32(regs + 0x45400, 1 << 31); |
| 308 | ret = poll32(regs + 0x45400, 1 << 30, 1 << 30); |
| 309 | if (ret) |
| 310 | goto err; |
| 311 | |
| 312 | return 0; |
| 313 | err: |
| 314 | debug("%s: ret=%d\n", __func__, ret); |
| 315 | return ret; |
| 316 | }; |
| 317 | |
| 318 | |
| 319 | static unsigned long gtt_read(struct broadwell_igd_priv *priv, |
| 320 | unsigned long reg) |
| 321 | { |
Masahiro Yamada | bf528cd | 2016-09-06 22:17:33 +0900 | [diff] [blame] | 322 | return readl(priv->regs + reg); |
Simon Glass | dec49b7 | 2016-03-11 22:07:30 -0700 | [diff] [blame] | 323 | } |
| 324 | |
| 325 | static void gtt_write(struct broadwell_igd_priv *priv, unsigned long reg, |
| 326 | unsigned long data) |
| 327 | { |
| 328 | writel(data, priv->regs + reg); |
| 329 | } |
| 330 | |
| 331 | static inline void gtt_clrsetbits(struct broadwell_igd_priv *priv, u32 reg, |
| 332 | u32 bic, u32 or) |
| 333 | { |
| 334 | clrsetbits_le32(priv->regs + reg, bic, or); |
| 335 | } |
| 336 | |
| 337 | static int gtt_poll(struct broadwell_igd_priv *priv, u32 reg, u32 mask, |
| 338 | u32 value) |
| 339 | { |
| 340 | unsigned try = GT_RETRY; |
| 341 | u32 data; |
| 342 | |
| 343 | while (try--) { |
| 344 | data = gtt_read(priv, reg); |
| 345 | if ((data & mask) == value) |
| 346 | return 0; |
| 347 | udelay(10); |
| 348 | } |
| 349 | |
| 350 | debug("GT init timeout\n"); |
| 351 | return -ETIMEDOUT; |
| 352 | } |
| 353 | |
| 354 | static void igd_setup_panel(struct udevice *dev) |
| 355 | { |
| 356 | struct broadwell_igd_plat *plat = dev_get_platdata(dev); |
| 357 | struct broadwell_igd_priv *priv = dev_get_priv(dev); |
| 358 | u32 reg32; |
| 359 | |
| 360 | /* Setup Digital Port Hotplug */ |
| 361 | reg32 = (plat->dp_hotplug[0] & 0x7) << 2; |
| 362 | reg32 |= (plat->dp_hotplug[1] & 0x7) << 10; |
| 363 | reg32 |= (plat->dp_hotplug[2] & 0x7) << 18; |
| 364 | gtt_write(priv, PCH_PORT_HOTPLUG, reg32); |
| 365 | |
| 366 | /* Setup Panel Power On Delays */ |
| 367 | reg32 = (plat->port_select & 0x3) << 30; |
| 368 | reg32 |= (plat->power_up_delay & 0x1fff) << 16; |
| 369 | reg32 |= (plat->power_backlight_on_delay & 0x1fff); |
| 370 | gtt_write(priv, PCH_PP_ON_DELAYS, reg32); |
| 371 | |
| 372 | /* Setup Panel Power Off Delays */ |
| 373 | reg32 = (plat->power_down_delay & 0x1fff) << 16; |
| 374 | reg32 |= (plat->power_backlight_off_delay & 0x1fff); |
| 375 | gtt_write(priv, PCH_PP_OFF_DELAYS, reg32); |
| 376 | |
| 377 | /* Setup Panel Power Cycle Delay */ |
| 378 | if (plat->power_cycle_delay) { |
| 379 | reg32 = gtt_read(priv, PCH_PP_DIVISOR); |
| 380 | reg32 &= ~0xff; |
| 381 | reg32 |= plat->power_cycle_delay & 0xff; |
| 382 | gtt_write(priv, PCH_PP_DIVISOR, reg32); |
| 383 | } |
| 384 | |
| 385 | /* Enable Backlight if needed */ |
| 386 | if (plat->cpu_backlight) { |
| 387 | gtt_write(priv, BLC_PWM_CPU_CTL2, BLC_PWM2_ENABLE); |
| 388 | gtt_write(priv, BLC_PWM_CPU_CTL, plat->cpu_backlight); |
| 389 | } |
| 390 | if (plat->pch_backlight) { |
| 391 | gtt_write(priv, BLC_PWM_PCH_CTL1, BLM_PCH_PWM_ENABLE); |
| 392 | gtt_write(priv, BLC_PWM_PCH_CTL2, plat->pch_backlight); |
| 393 | } |
| 394 | } |
| 395 | |
| 396 | static int igd_cdclk_init_haswell(struct udevice *dev) |
| 397 | { |
| 398 | struct broadwell_igd_plat *plat = dev_get_platdata(dev); |
| 399 | struct broadwell_igd_priv *priv = dev_get_priv(dev); |
| 400 | int cdclk = plat->cdclk; |
| 401 | u16 devid; |
| 402 | int gpu_is_ulx = 0; |
| 403 | u32 dpdiv, lpcll; |
| 404 | int ret; |
| 405 | |
| 406 | dm_pci_read_config16(dev, PCI_DEVICE_ID, &devid); |
| 407 | |
| 408 | /* Check for ULX GT1 or GT2 */ |
| 409 | if (devid == 0x0a0e || devid == 0x0a1e) |
| 410 | gpu_is_ulx = 1; |
| 411 | |
| 412 | /* 675MHz is not supported on haswell */ |
| 413 | if (cdclk == GT_CDCLK_675) |
| 414 | cdclk = GT_CDCLK_337; |
| 415 | |
| 416 | /* If CD clock is fixed or ULT then set to 450MHz */ |
| 417 | if ((gtt_read(priv, 0x42014) & 0x1000000) || cpu_is_ult()) |
| 418 | cdclk = GT_CDCLK_450; |
| 419 | |
| 420 | /* 540MHz is not supported on ULX */ |
| 421 | if (gpu_is_ulx && cdclk == GT_CDCLK_540) |
| 422 | cdclk = GT_CDCLK_337; |
| 423 | |
| 424 | /* 337.5MHz is not supported on non-ULT/ULX */ |
| 425 | if (!gpu_is_ulx && !cpu_is_ult() && cdclk == GT_CDCLK_337) |
| 426 | cdclk = GT_CDCLK_450; |
| 427 | |
| 428 | /* Set variables based on CD Clock setting */ |
| 429 | switch (cdclk) { |
| 430 | case GT_CDCLK_337: |
| 431 | dpdiv = 169; |
| 432 | lpcll = (1 << 26); |
| 433 | break; |
| 434 | case GT_CDCLK_450: |
| 435 | dpdiv = 225; |
| 436 | lpcll = 0; |
| 437 | break; |
| 438 | case GT_CDCLK_540: |
| 439 | dpdiv = 270; |
| 440 | lpcll = (1 << 26); |
| 441 | break; |
| 442 | default: |
| 443 | ret = -EDOM; |
| 444 | goto err; |
| 445 | } |
| 446 | |
| 447 | /* Set LPCLL_CTL CD Clock Frequency Select */ |
| 448 | gtt_clrsetbits(priv, 0x130040, ~0xf3ffffff, lpcll); |
| 449 | |
| 450 | /* ULX: Inform power controller of selected frequency */ |
| 451 | if (gpu_is_ulx) { |
| 452 | if (cdclk == GT_CDCLK_450) |
| 453 | gtt_write(priv, 0x138128, 0x00000000); /* 450MHz */ |
| 454 | else |
| 455 | gtt_write(priv, 0x138128, 0x00000001); /* 337.5MHz */ |
| 456 | gtt_write(priv, 0x13812c, 0x00000000); |
| 457 | gtt_write(priv, 0x138124, 0x80000017); |
| 458 | } |
| 459 | |
| 460 | /* Set CPU DP AUX 2X bit clock dividers */ |
| 461 | gtt_clrsetbits(priv, 0x64010, ~0xfffff800, dpdiv); |
| 462 | gtt_clrsetbits(priv, 0x64810, ~0xfffff800, dpdiv); |
| 463 | |
| 464 | return 0; |
| 465 | err: |
| 466 | debug("%s: ret=%d\n", __func__, ret); |
| 467 | return ret; |
| 468 | } |
| 469 | |
| 470 | static int igd_cdclk_init_broadwell(struct udevice *dev) |
| 471 | { |
| 472 | struct broadwell_igd_plat *plat = dev_get_platdata(dev); |
| 473 | struct broadwell_igd_priv *priv = dev_get_priv(dev); |
| 474 | int cdclk = plat->cdclk; |
| 475 | u32 dpdiv, lpcll, pwctl, cdset; |
| 476 | int ret; |
| 477 | |
| 478 | /* Inform power controller of upcoming frequency change */ |
| 479 | gtt_write(priv, 0x138128, 0); |
| 480 | gtt_write(priv, 0x13812c, 0); |
| 481 | gtt_write(priv, 0x138124, 0x80000018); |
| 482 | |
| 483 | /* Poll GT driver mailbox for run/busy clear */ |
| 484 | if (gtt_poll(priv, 0x138124, 1 << 31, 0 << 31)) |
| 485 | cdclk = GT_CDCLK_450; |
| 486 | |
| 487 | if (gtt_read(priv, 0x42014) & 0x1000000) { |
| 488 | /* If CD clock is fixed then set to 450MHz */ |
| 489 | cdclk = GT_CDCLK_450; |
| 490 | } else { |
| 491 | /* Program CD clock to highest supported freq */ |
| 492 | if (cpu_is_ult()) |
| 493 | cdclk = GT_CDCLK_540; |
| 494 | else |
| 495 | cdclk = GT_CDCLK_675; |
| 496 | } |
| 497 | |
| 498 | /* CD clock frequency 675MHz not supported on ULT */ |
| 499 | if (cpu_is_ult() && cdclk == GT_CDCLK_675) |
| 500 | cdclk = GT_CDCLK_540; |
| 501 | |
| 502 | /* Set variables based on CD Clock setting */ |
| 503 | switch (cdclk) { |
| 504 | case GT_CDCLK_337: |
| 505 | cdset = 337; |
| 506 | lpcll = (1 << 27); |
| 507 | pwctl = 2; |
| 508 | dpdiv = 169; |
| 509 | break; |
| 510 | case GT_CDCLK_450: |
| 511 | cdset = 449; |
| 512 | lpcll = 0; |
| 513 | pwctl = 0; |
| 514 | dpdiv = 225; |
| 515 | break; |
| 516 | case GT_CDCLK_540: |
| 517 | cdset = 539; |
| 518 | lpcll = (1 << 26); |
| 519 | pwctl = 1; |
| 520 | dpdiv = 270; |
| 521 | break; |
| 522 | case GT_CDCLK_675: |
| 523 | cdset = 674; |
| 524 | lpcll = (1 << 26) | (1 << 27); |
| 525 | pwctl = 3; |
| 526 | dpdiv = 338; |
| 527 | break; |
| 528 | default: |
| 529 | ret = -EDOM; |
| 530 | goto err; |
| 531 | } |
| 532 | debug("%s: frequency = %d\n", __func__, cdclk); |
| 533 | |
| 534 | /* Set LPCLL_CTL CD Clock Frequency Select */ |
| 535 | gtt_clrsetbits(priv, 0x130040, ~0xf3ffffff, lpcll); |
| 536 | |
| 537 | /* Inform power controller of selected frequency */ |
| 538 | gtt_write(priv, 0x138128, pwctl); |
| 539 | gtt_write(priv, 0x13812c, 0); |
| 540 | gtt_write(priv, 0x138124, 0x80000017); |
| 541 | |
| 542 | /* Program CD Clock Frequency */ |
| 543 | gtt_clrsetbits(priv, 0x46200, ~0xfffffc00, cdset); |
| 544 | |
| 545 | /* Set CPU DP AUX 2X bit clock dividers */ |
| 546 | gtt_clrsetbits(priv, 0x64010, ~0xfffff800, dpdiv); |
| 547 | gtt_clrsetbits(priv, 0x64810, ~0xfffff800, dpdiv); |
| 548 | |
| 549 | return 0; |
| 550 | err: |
| 551 | debug("%s: ret=%d\n", __func__, ret); |
| 552 | return ret; |
| 553 | } |
| 554 | |
| 555 | u8 systemagent_revision(struct udevice *bus) |
| 556 | { |
| 557 | ulong val; |
| 558 | |
| 559 | pci_bus_read_config(bus, PCI_BDF(0, 0, 0), PCI_REVISION_ID, &val, |
| 560 | PCI_SIZE_32); |
| 561 | |
| 562 | return val; |
| 563 | } |
| 564 | |
| 565 | static int igd_pre_init(struct udevice *dev, bool is_broadwell) |
| 566 | { |
| 567 | struct broadwell_igd_plat *plat = dev_get_platdata(dev); |
| 568 | struct broadwell_igd_priv *priv = dev_get_priv(dev); |
| 569 | u32 rp1_gfx_freq; |
| 570 | int ret; |
| 571 | |
| 572 | mdelay(plat->pre_graphics_delay); |
| 573 | |
| 574 | /* Early init steps */ |
| 575 | if (is_broadwell) { |
| 576 | ret = broadwell_early_init(dev); |
| 577 | if (ret) |
| 578 | goto err; |
| 579 | |
| 580 | /* Set GFXPAUSE based on stepping */ |
| 581 | if (cpu_get_stepping() <= (CPUID_BROADWELL_E0 & 0xf) && |
| 582 | systemagent_revision(pci_get_controller(dev)) <= 9) { |
| 583 | gtt_write(priv, 0xa000, 0x300ff); |
| 584 | } else { |
| 585 | gtt_write(priv, 0xa000, 0x30020); |
| 586 | } |
| 587 | } else { |
| 588 | ret = haswell_early_init(dev); |
| 589 | if (ret) |
| 590 | goto err; |
| 591 | } |
| 592 | |
| 593 | /* Set RP1 graphics frequency */ |
| 594 | rp1_gfx_freq = (readl(MCHBAR_REG(0x5998)) >> 8) & 0xff; |
| 595 | gtt_write(priv, 0xa008, rp1_gfx_freq << 24); |
| 596 | |
| 597 | /* Post VBIOS panel setup */ |
| 598 | igd_setup_panel(dev); |
| 599 | |
| 600 | return 0; |
| 601 | err: |
| 602 | debug("%s: ret=%d\n", __func__, ret); |
| 603 | return ret; |
| 604 | } |
| 605 | |
| 606 | static int igd_post_init(struct udevice *dev, bool is_broadwell) |
| 607 | { |
| 608 | int ret; |
| 609 | |
| 610 | /* Late init steps */ |
| 611 | if (is_broadwell) { |
| 612 | ret = igd_cdclk_init_broadwell(dev); |
| 613 | if (ret) |
| 614 | return ret; |
| 615 | ret = broadwell_late_init(dev); |
| 616 | if (ret) |
| 617 | return ret; |
| 618 | } else { |
| 619 | igd_cdclk_init_haswell(dev); |
| 620 | ret = haswell_late_init(dev); |
| 621 | if (ret) |
| 622 | return ret; |
| 623 | } |
| 624 | |
| 625 | return 0; |
| 626 | } |
| 627 | |
| 628 | static int broadwell_igd_int15_handler(void) |
| 629 | { |
| 630 | int res = 0; |
| 631 | |
| 632 | debug("%s: INT15 function %04x!\n", __func__, M.x86.R_AX); |
| 633 | |
| 634 | switch (M.x86.R_AX) { |
| 635 | case 0x5f35: |
| 636 | /* |
| 637 | * Boot Display Device Hook: |
| 638 | * bit 0 = CRT |
| 639 | * bit 1 = TV (eDP) |
| 640 | * bit 2 = EFP |
| 641 | * bit 3 = LFP |
| 642 | * bit 4 = CRT2 |
| 643 | * bit 5 = TV2 (eDP) |
| 644 | * bit 6 = EFP2 |
| 645 | * bit 7 = LFP2 |
| 646 | */ |
| 647 | M.x86.R_AX = 0x005f; |
| 648 | M.x86.R_CX = 0x0000; /* Use video bios default */ |
| 649 | res = 1; |
| 650 | break; |
| 651 | default: |
| 652 | debug("Unknown INT15 function %04x!\n", M.x86.R_AX); |
| 653 | break; |
| 654 | } |
| 655 | |
| 656 | return res; |
| 657 | } |
| 658 | |
| 659 | static int broadwell_igd_probe(struct udevice *dev) |
| 660 | { |
| 661 | struct video_uc_platdata *plat = dev_get_uclass_platdata(dev); |
| 662 | struct video_priv *uc_priv = dev_get_uclass_priv(dev); |
Simon Glass | dec49b7 | 2016-03-11 22:07:30 -0700 | [diff] [blame] | 663 | bool is_broadwell; |
Simon Glass | dec49b7 | 2016-03-11 22:07:30 -0700 | [diff] [blame] | 664 | int ret; |
| 665 | |
| 666 | if (!ll_boot_init()) { |
| 667 | /* |
| 668 | * If we are running from EFI or coreboot, this driver can't |
| 669 | * work. |
| 670 | */ |
| 671 | printf("Not available (previous bootloader prevents it)\n"); |
| 672 | return -EPERM; |
| 673 | } |
| 674 | is_broadwell = cpu_get_family_model() == BROADWELL_FAMILY_ULT; |
| 675 | bootstage_start(BOOTSTAGE_ID_ACCUM_LCD, "vesa display"); |
| 676 | debug("%s: is_broadwell=%d\n", __func__, is_broadwell); |
| 677 | ret = igd_pre_init(dev, is_broadwell); |
| 678 | if (!ret) { |
Simon Glass | 5f69985 | 2016-10-05 20:42:19 -0600 | [diff] [blame] | 679 | ret = vbe_setup_video(dev, broadwell_igd_int15_handler); |
| 680 | if (ret) |
| 681 | debug("failed to run video BIOS: %d\n", ret); |
Simon Glass | dec49b7 | 2016-03-11 22:07:30 -0700 | [diff] [blame] | 682 | } |
| 683 | if (!ret) |
| 684 | ret = igd_post_init(dev, is_broadwell); |
| 685 | bootstage_accum(BOOTSTAGE_ID_ACCUM_LCD); |
| 686 | if (ret) |
| 687 | return ret; |
| 688 | |
Simon Glass | 5f69985 | 2016-10-05 20:42:19 -0600 | [diff] [blame] | 689 | /* Use write-combining for the graphics memory, 256MB */ |
| 690 | ret = mtrr_add_request(MTRR_TYPE_WRCOMB, plat->base, 256 << 20); |
Simon Glass | dec49b7 | 2016-03-11 22:07:30 -0700 | [diff] [blame] | 691 | if (!ret) |
| 692 | ret = mtrr_commit(true); |
| 693 | if (ret && ret != -ENOSYS) { |
| 694 | printf("Failed to add MTRR: Display will be slow (err %d)\n", |
| 695 | ret); |
| 696 | } |
| 697 | |
Simon Glass | 5f69985 | 2016-10-05 20:42:19 -0600 | [diff] [blame] | 698 | debug("fb=%lx, size %x, display size=%d %d %d\n", plat->base, |
| 699 | plat->size, uc_priv->xsize, uc_priv->ysize, uc_priv->bpix); |
Simon Glass | dec49b7 | 2016-03-11 22:07:30 -0700 | [diff] [blame] | 700 | |
| 701 | return 0; |
| 702 | } |
| 703 | |
| 704 | static int broadwell_igd_ofdata_to_platdata(struct udevice *dev) |
| 705 | { |
| 706 | struct broadwell_igd_plat *plat = dev_get_platdata(dev); |
| 707 | struct broadwell_igd_priv *priv = dev_get_priv(dev); |
Simon Glass | dd79d6e | 2017-01-17 16:52:55 -0700 | [diff] [blame] | 708 | int node = dev_of_offset(dev); |
Simon Glass | dec49b7 | 2016-03-11 22:07:30 -0700 | [diff] [blame] | 709 | const void *blob = gd->fdt_blob; |
| 710 | |
| 711 | if (fdtdec_get_int_array(blob, node, "intel,dp-hotplug", |
| 712 | plat->dp_hotplug, |
| 713 | ARRAY_SIZE(plat->dp_hotplug))) |
| 714 | return -EINVAL; |
| 715 | plat->port_select = fdtdec_get_int(blob, node, "intel,port-select", 0); |
| 716 | plat->power_cycle_delay = fdtdec_get_int(blob, node, |
| 717 | "intel,power-cycle-delay", 0); |
| 718 | plat->power_up_delay = fdtdec_get_int(blob, node, |
| 719 | "intel,power-up-delay", 0); |
| 720 | plat->power_down_delay = fdtdec_get_int(blob, node, |
| 721 | "intel,power-down-delay", 0); |
| 722 | plat->power_backlight_on_delay = fdtdec_get_int(blob, node, |
| 723 | "intel,power-backlight-on-delay", 0); |
| 724 | plat->power_backlight_off_delay = fdtdec_get_int(blob, node, |
| 725 | "intel,power-backlight-off-delay", 0); |
| 726 | plat->cpu_backlight = fdtdec_get_int(blob, node, |
| 727 | "intel,cpu-backlight", 0); |
| 728 | plat->pch_backlight = fdtdec_get_int(blob, node, |
| 729 | "intel,pch-backlight", 0); |
| 730 | plat->pre_graphics_delay = fdtdec_get_int(blob, node, |
| 731 | "intel,pre-graphics-delay", 0); |
| 732 | priv->regs = (u8 *)dm_pci_read_bar32(dev, 0); |
| 733 | debug("%s: regs at %p\n", __func__, priv->regs); |
| 734 | debug("dp_hotplug %d %d %d\n", plat->dp_hotplug[0], plat->dp_hotplug[1], |
| 735 | plat->dp_hotplug[2]); |
| 736 | debug("port_select = %d\n", plat->port_select); |
| 737 | debug("power_up_delay = %d\n", plat->power_up_delay); |
| 738 | debug("power_backlight_on_delay = %d\n", |
| 739 | plat->power_backlight_on_delay); |
| 740 | debug("power_down_delay = %d\n", plat->power_down_delay); |
| 741 | debug("power_backlight_off_delay = %d\n", |
| 742 | plat->power_backlight_off_delay); |
| 743 | debug("power_cycle_delay = %d\n", plat->power_cycle_delay); |
| 744 | debug("cpu_backlight = %x\n", plat->cpu_backlight); |
| 745 | debug("pch_backlight = %x\n", plat->pch_backlight); |
| 746 | debug("cdclk = %d\n", plat->cdclk); |
| 747 | debug("pre_graphics_delay = %d\n", plat->pre_graphics_delay); |
| 748 | |
| 749 | return 0; |
| 750 | } |
| 751 | |
| 752 | static const struct video_ops broadwell_igd_ops = { |
| 753 | }; |
| 754 | |
| 755 | static const struct udevice_id broadwell_igd_ids[] = { |
| 756 | { .compatible = "intel,broadwell-igd" }, |
| 757 | { } |
| 758 | }; |
| 759 | |
| 760 | U_BOOT_DRIVER(broadwell_igd) = { |
| 761 | .name = "broadwell_igd", |
| 762 | .id = UCLASS_VIDEO, |
| 763 | .of_match = broadwell_igd_ids, |
| 764 | .ops = &broadwell_igd_ops, |
| 765 | .ofdata_to_platdata = broadwell_igd_ofdata_to_platdata, |
| 766 | .probe = broadwell_igd_probe, |
| 767 | .priv_auto_alloc_size = sizeof(struct broadwell_igd_priv), |
| 768 | .platdata_auto_alloc_size = sizeof(struct broadwell_igd_plat), |
| 769 | }; |