Michal Simek | ae022cf | 2022-05-18 12:49:26 +0200 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0 |
| 2 | /* |
| 3 | * dts file for KR260 revA Carrier Card |
| 4 | * |
| 5 | * (C) Copyright 2021, Xilinx, Inc. |
| 6 | * |
| 7 | * Michal Simek <michal.simek@xilinx.com> |
| 8 | */ |
| 9 | |
| 10 | #include <dt-bindings/gpio/gpio.h> |
| 11 | #include <dt-bindings/net/ti-dp83867.h> |
| 12 | #include <dt-bindings/phy/phy.h> |
| 13 | #include <dt-bindings/pinctrl/pinctrl-zynqmp.h> |
| 14 | |
| 15 | /dts-v1/; |
| 16 | /plugin/; |
| 17 | |
| 18 | &{/} { |
| 19 | compatible = "xlnx,zynqmp-sk-kr260-revA", |
| 20 | "xlnx,zynqmp-sk-kr260", "xlnx,zynqmp"; |
| 21 | |
| 22 | ina260-u14 { |
| 23 | compatible = "iio-hwmon"; |
| 24 | io-channels = <&u14 0>, <&u14 1>, <&u14 2>; |
| 25 | }; |
| 26 | |
| 27 | si5332_0: si5332_0 { /* u17 - GEM0/1 */ |
| 28 | compatible = "fixed-clock"; |
| 29 | #clock-cells = <0>; |
| 30 | clock-frequency = <125000000>; |
| 31 | }; |
| 32 | |
| 33 | si5332_1: si5332_1 { /* u17 - DP */ |
| 34 | compatible = "fixed-clock"; |
| 35 | #clock-cells = <0>; |
| 36 | clock-frequency = <27000000>; |
| 37 | }; |
| 38 | |
| 39 | si5332_2: si5332_2 { /* u17 - USB */ |
| 40 | compatible = "fixed-clock"; |
| 41 | #clock-cells = <0>; |
| 42 | clock-frequency = <26000000>; |
| 43 | }; |
| 44 | |
| 45 | si5332_3: si5332_3 { /* u17 - SFP+ */ |
| 46 | compatible = "fixed-clock"; |
| 47 | #clock-cells = <0>; |
| 48 | clock-frequency = <156250000>; |
| 49 | }; |
| 50 | |
| 51 | si5332_4: si5332_4 { /* u17 - GEM2 */ |
| 52 | compatible = "fixed-clock"; |
| 53 | #clock-cells = <0>; |
| 54 | clock-frequency = <25000000>; |
| 55 | }; |
| 56 | |
| 57 | si5332_5: si5332_5 { /* u17 - GEM3 */ |
| 58 | compatible = "fixed-clock"; |
| 59 | #clock-cells = <0>; |
| 60 | clock-frequency = <25000000>; |
| 61 | }; |
| 62 | }; |
| 63 | |
| 64 | &i2c1 { /* I2C_SCK C26/C27 - MIO from SOM */ |
| 65 | #address-cells = <1>; |
| 66 | #size-cells = <0>; |
| 67 | pinctrl-names = "default", "gpio"; |
| 68 | pinctrl-0 = <&pinctrl_i2c1_default>; |
| 69 | pinctrl-1 = <&pinctrl_i2c1_gpio>; |
| 70 | scl-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>; |
| 71 | sda-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>; |
| 72 | |
| 73 | u14: ina260@40 { /* u14 */ |
| 74 | compatible = "ti,ina260"; |
| 75 | #io-channel-cells = <1>; |
| 76 | label = "ina260-u14"; |
| 77 | reg = <0x40>; |
| 78 | }; |
| 79 | |
| 80 | slg7xl45106: gpio@11 { /* u19 - reset logic */ |
| 81 | compatible = "dlg,slg7xl45106"; |
| 82 | reg = <0x11>; |
| 83 | label = "resetchip"; |
| 84 | gpio-controller; |
| 85 | #gpio-cells = <2>; |
| 86 | gpio-line-names = "USB0_PHY_RESET_B", "USB1_PHY_RESET_B", |
| 87 | "SD_RESET_B", "USB0_HUB_RESET_B", |
| 88 | "USB1_HUB_RESET_B", "PS_GEM0_RESET_B", |
| 89 | "PS_GEM1_RESET_B", ""; |
| 90 | }; |
| 91 | |
| 92 | i2c-mux@74 { /* u18 */ |
| 93 | compatible = "nxp,pca9546"; |
| 94 | #address-cells = <1>; |
| 95 | #size-cells = <0>; |
| 96 | reg = <0x74>; |
| 97 | usbhub_i2c0: i2c@0 { |
| 98 | #address-cells = <1>; |
| 99 | #size-cells = <0>; |
| 100 | reg = <0>; |
| 101 | }; |
| 102 | usbhub_i2c1: i2c@1 { |
| 103 | #address-cells = <1>; |
| 104 | #size-cells = <0>; |
| 105 | reg = <1>; |
| 106 | }; |
| 107 | /* Bus 2/3 are not connected */ |
| 108 | }; |
| 109 | |
| 110 | /* si5332@6a - u17 - clock-generator */ |
| 111 | }; |
| 112 | |
| 113 | /* GEM SGMII/DP and USB 3.0 */ |
| 114 | &psgtr { |
| 115 | status = "okay"; |
| 116 | /* gem0/1, dp, usb */ |
| 117 | clocks = <&si5332_0>, <&si5332_1>, <&si5332_2>; |
| 118 | clock-names = "ref0", "ref1", "ref2"; |
| 119 | }; |
| 120 | |
| 121 | &zynqmp_dpsub { |
| 122 | status = "okay"; |
| 123 | phy-names = "dp-phy0"; |
| 124 | phys = <&psgtr 1 PHY_TYPE_DP 0 1>; |
| 125 | assigned-clock-rates = <27000000>, <25000000>, <300000000>; |
| 126 | }; |
| 127 | |
| 128 | &zynqmp_dpdma { |
| 129 | status = "okay"; |
| 130 | assigned-clock-rates = <600000000>; |
| 131 | }; |
| 132 | |
| 133 | &usb0 { /* mio52 - mio63 */ |
| 134 | status = "okay"; |
| 135 | pinctrl-names = "default"; |
| 136 | pinctrl-0 = <&pinctrl_usb0_default>; |
| 137 | phy-names = "usb3-phy"; |
| 138 | phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; |
| 139 | reset-gpios = <&slg7xl45106 0 GPIO_ACTIVE_LOW>; |
| 140 | assigned-clock-rates = <250000000>, <20000000>; |
| 141 | |
| 142 | usbhub0: usb-hub { /* u43 */ |
| 143 | i2c-bus = <&usbhub_i2c0>; |
| 144 | compatible = "microchip,usb5744"; |
| 145 | reset-gpios = <&slg7xl45106 3 GPIO_ACTIVE_LOW>; |
| 146 | }; |
| 147 | |
| 148 | usb2244: usb-sd { /* u38 */ |
| 149 | compatible = "microchip,usb2244"; |
| 150 | reset-gpios = <&slg7xl45106 2 GPIO_ACTIVE_LOW>; |
| 151 | }; |
| 152 | }; |
| 153 | |
| 154 | &dwc3_0 { |
| 155 | status = "okay"; |
| 156 | dr_mode = "host"; |
| 157 | snps,usb3_lpm_capable; |
| 158 | maximum-speed = "super-speed"; |
| 159 | }; |
| 160 | |
| 161 | &usb1 { /* mio64 - mio75 */ |
| 162 | status = "okay"; |
| 163 | pinctrl-names = "default"; |
| 164 | pinctrl-0 = <&pinctrl_usb1_default>; |
| 165 | phy-names = "usb3-phy"; |
| 166 | phys = <&psgtr 3 PHY_TYPE_USB3 1 2>; |
| 167 | reset-gpios = <&slg7xl45106 1 GPIO_ACTIVE_LOW>; |
| 168 | assigned-clock-rates = <250000000>, <20000000>; |
| 169 | |
| 170 | usbhub1: usb-hub { /* u84 */ |
| 171 | i2c-bus = <&usbhub_i2c1>; |
| 172 | compatible = "microchip,usb5744"; |
| 173 | reset-gpios = <&slg7xl45106 4 GPIO_ACTIVE_LOW>; |
| 174 | }; |
| 175 | }; |
| 176 | |
| 177 | &dwc3_1 { |
| 178 | status = "okay"; |
| 179 | dr_mode = "host"; |
| 180 | snps,usb3_lpm_capable; |
| 181 | maximum-speed = "super-speed"; |
| 182 | }; |
| 183 | |
| 184 | &gem0 { /* mdio mio50/51 */ |
| 185 | status = "okay"; |
| 186 | phys = <&psgtr 0 PHY_TYPE_SGMII 0 0>; |
| 187 | phy-handle = <&phy0>; |
| 188 | phy-mode = "sgmii"; |
| 189 | is-internal-pcspma; |
| 190 | }; |
| 191 | |
| 192 | &gem1 { /* mdio mio50/51, gem mio38 - mio49 */ |
| 193 | status = "okay"; |
| 194 | pinctrl-names = "default"; |
| 195 | pinctrl-0 = <&pinctrl_gem1_default>; |
| 196 | phy-handle = <&phy1>; |
| 197 | phy-mode = "rgmii-id"; |
| 198 | |
| 199 | mdio: mdio { |
| 200 | #address-cells = <1>; |
| 201 | #size-cells = <0>; |
| 202 | phy0: ethernet-phy@4 { /* u81 */ |
| 203 | #phy-cells = <1>; |
| 204 | compatible = "ethernet-phy-id2000.a231"; |
| 205 | reg = <4>; |
| 206 | ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; |
| 207 | ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_75_NS>; |
| 208 | ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; |
| 209 | ti,dp83867-rxctrl-strap-quirk; |
| 210 | reset-assert-us = <100>; |
| 211 | reset-deassert-us = <280>; |
| 212 | reset-gpios = <&slg7xl45106 5 GPIO_ACTIVE_LOW>; |
| 213 | }; |
| 214 | phy1: ethernet-phy@8 { /* u36 */ |
| 215 | #phy-cells = <1>; |
| 216 | compatible = "ethernet-phy-id2000.a231"; |
| 217 | reg = <8>; |
| 218 | ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; |
| 219 | ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_75_NS>; |
| 220 | ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; |
| 221 | ti,dp83867-rxctrl-strap-quirk; |
| 222 | reset-assert-us = <100>; |
| 223 | reset-deassert-us = <280>; |
| 224 | reset-gpios = <&slg7xl45106 6 GPIO_ACTIVE_LOW>; |
| 225 | }; |
| 226 | }; |
| 227 | }; |
| 228 | |
| 229 | /* gem2/gem3 via PL with phys u79@2 and u80@3 */ |
| 230 | |
| 231 | &pinctrl0 { /* required by spec */ |
| 232 | status = "okay"; |
| 233 | |
| 234 | pinctrl_uart1_default: uart1-default { |
| 235 | conf { |
| 236 | groups = "uart1_9_grp"; |
| 237 | slew-rate = <SLEW_RATE_SLOW>; |
| 238 | power-source = <IO_STANDARD_LVCMOS18>; |
| 239 | drive-strength = <12>; |
| 240 | }; |
| 241 | |
| 242 | conf-rx { |
| 243 | pins = "MIO37"; |
| 244 | bias-high-impedance; |
| 245 | }; |
| 246 | |
| 247 | conf-tx { |
| 248 | pins = "MIO36"; |
| 249 | bias-disable; |
| 250 | }; |
| 251 | |
| 252 | mux { |
| 253 | groups = "uart1_9_grp"; |
| 254 | function = "uart1"; |
| 255 | }; |
| 256 | }; |
| 257 | |
| 258 | pinctrl_i2c1_default: i2c1-default { |
| 259 | conf { |
| 260 | groups = "i2c1_6_grp"; |
| 261 | bias-pull-up; |
| 262 | slew-rate = <SLEW_RATE_SLOW>; |
| 263 | power-source = <IO_STANDARD_LVCMOS18>; |
| 264 | }; |
| 265 | |
| 266 | mux { |
| 267 | groups = "i2c1_6_grp"; |
| 268 | function = "i2c1"; |
| 269 | }; |
| 270 | }; |
| 271 | |
| 272 | pinctrl_i2c1_gpio: i2c1-gpio { |
| 273 | conf { |
| 274 | groups = "gpio0_24_grp", "gpio0_25_grp"; |
| 275 | slew-rate = <SLEW_RATE_SLOW>; |
| 276 | power-source = <IO_STANDARD_LVCMOS18>; |
| 277 | }; |
| 278 | |
| 279 | mux { |
| 280 | groups = "gpio0_24_grp", "gpio0_25_grp"; |
| 281 | function = "gpio0"; |
| 282 | }; |
| 283 | }; |
| 284 | |
| 285 | pinctrl_gem1_default: gem1-default { |
| 286 | conf { |
| 287 | groups = "ethernet1_0_grp"; |
| 288 | slew-rate = <SLEW_RATE_SLOW>; |
| 289 | power-source = <IO_STANDARD_LVCMOS18>; |
| 290 | }; |
| 291 | |
| 292 | conf-rx { |
| 293 | pins = "MIO44", "MIO46", "MIO48"; |
| 294 | bias-high-impedance; |
| 295 | low-power-disable; |
| 296 | }; |
| 297 | |
| 298 | conf-bootstrap { |
| 299 | pins = "MIO45", "MIO47", "MIO49"; |
| 300 | bias-disable; |
| 301 | low-power-disable; |
| 302 | }; |
| 303 | |
| 304 | conf-tx { |
| 305 | pins = "MIO38", "MIO39", "MIO40", |
| 306 | "MIO41", "MIO42", "MIO43"; |
| 307 | bias-disable; |
| 308 | low-power-enable; |
| 309 | }; |
| 310 | |
| 311 | conf-mdio { |
| 312 | groups = "mdio1_0_grp"; |
| 313 | slew-rate = <SLEW_RATE_SLOW>; |
| 314 | power-source = <IO_STANDARD_LVCMOS18>; |
| 315 | bias-disable; |
| 316 | }; |
| 317 | |
| 318 | mux-mdio { |
| 319 | function = "mdio1"; |
| 320 | groups = "mdio1_0_grp"; |
| 321 | }; |
| 322 | |
| 323 | mux { |
| 324 | function = "ethernet1"; |
| 325 | groups = "ethernet1_0_grp"; |
| 326 | }; |
| 327 | }; |
| 328 | |
| 329 | pinctrl_usb0_default: usb0-default { |
| 330 | conf { |
| 331 | groups = "usb0_0_grp"; |
Michal Simek | ae022cf | 2022-05-18 12:49:26 +0200 | [diff] [blame] | 332 | power-source = <IO_STANDARD_LVCMOS18>; |
| 333 | }; |
| 334 | |
| 335 | conf-rx { |
| 336 | pins = "MIO52", "MIO53", "MIO55"; |
| 337 | bias-high-impedance; |
Ashok Reddy Soma | 4d0ecf6 | 2022-06-15 12:16:13 +0200 | [diff] [blame] | 338 | drive-strength = <12>; |
| 339 | slew-rate = <SLEW_RATE_FAST>; |
Michal Simek | ae022cf | 2022-05-18 12:49:26 +0200 | [diff] [blame] | 340 | }; |
| 341 | |
| 342 | conf-tx { |
| 343 | pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59", |
| 344 | "MIO60", "MIO61", "MIO62", "MIO63"; |
| 345 | bias-disable; |
Ashok Reddy Soma | 4d0ecf6 | 2022-06-15 12:16:13 +0200 | [diff] [blame] | 346 | drive-strength = <4>; |
| 347 | slew-rate = <SLEW_RATE_SLOW>; |
Michal Simek | ae022cf | 2022-05-18 12:49:26 +0200 | [diff] [blame] | 348 | }; |
| 349 | |
| 350 | mux { |
| 351 | groups = "usb0_0_grp"; |
| 352 | function = "usb0"; |
| 353 | }; |
| 354 | }; |
| 355 | |
| 356 | pinctrl_usb1_default: usb1-default { |
| 357 | conf { |
| 358 | groups = "usb1_0_grp"; |
Michal Simek | ae022cf | 2022-05-18 12:49:26 +0200 | [diff] [blame] | 359 | power-source = <IO_STANDARD_LVCMOS18>; |
| 360 | }; |
| 361 | |
| 362 | conf-rx { |
| 363 | pins = "MIO64", "MIO65", "MIO67"; |
| 364 | bias-high-impedance; |
Ashok Reddy Soma | 4d0ecf6 | 2022-06-15 12:16:13 +0200 | [diff] [blame] | 365 | drive-strength = <12>; |
| 366 | slew-rate = <SLEW_RATE_FAST>; |
Michal Simek | ae022cf | 2022-05-18 12:49:26 +0200 | [diff] [blame] | 367 | }; |
| 368 | |
| 369 | conf-tx { |
| 370 | pins = "MIO66", "MIO68", "MIO69", "MIO70", "MIO71", |
| 371 | "MIO72", "MIO73", "MIO74", "MIO75"; |
| 372 | bias-disable; |
Ashok Reddy Soma | 4d0ecf6 | 2022-06-15 12:16:13 +0200 | [diff] [blame] | 373 | drive-strength = <4>; |
| 374 | slew-rate = <SLEW_RATE_SLOW>; |
Michal Simek | ae022cf | 2022-05-18 12:49:26 +0200 | [diff] [blame] | 375 | }; |
| 376 | |
| 377 | mux { |
| 378 | groups = "usb1_0_grp"; |
| 379 | function = "usb1"; |
| 380 | }; |
| 381 | }; |
| 382 | }; |
| 383 | |
| 384 | &uart1 { |
| 385 | status = "okay"; |
| 386 | pinctrl-names = "default"; |
| 387 | pinctrl-0 = <&pinctrl_uart1_default>; |
| 388 | }; |