Venkatesh Yadav Abbarapu | daac30a | 2024-09-20 09:46:49 +0530 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0-only |
| 2 | /* |
| 3 | * UFS Host driver for Synopsys Designware Core |
| 4 | * |
| 5 | * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com) |
| 6 | * |
| 7 | */ |
| 8 | #include <clk.h> |
| 9 | #include <dm.h> |
| 10 | #include <ufs.h> |
| 11 | #include <asm/io.h> |
| 12 | #include <dm/device_compat.h> |
| 13 | #include <linux/bitops.h> |
| 14 | #include <linux/delay.h> |
| 15 | #include <linux/err.h> |
| 16 | #include <linux/time.h> |
| 17 | |
| 18 | #include "ufs.h" |
| 19 | #include "ufshci-dwc.h" |
| 20 | #include "ufshcd-dwc.h" |
| 21 | |
| 22 | int ufshcd_dwc_dme_set_attrs(struct ufs_hba *hba, |
| 23 | const struct ufshcd_dme_attr_val *v, int n) |
| 24 | { |
| 25 | int ret = 0; |
| 26 | int attr_node = 0; |
| 27 | |
| 28 | for (attr_node = 0; attr_node < n; attr_node++) { |
| 29 | ret = ufshcd_dme_set_attr(hba, v[attr_node].attr_sel, |
| 30 | ATTR_SET_NOR, v[attr_node].mib_val, v[attr_node].peer); |
| 31 | if (ret) |
| 32 | return ret; |
| 33 | } |
| 34 | |
| 35 | return 0; |
| 36 | } |
| 37 | |
| 38 | /** |
| 39 | * ufshcd_dwc_program_clk_div() - program clock divider. |
| 40 | * @hba: Private Structure pointer |
| 41 | * @divider_val: clock divider value to be programmed |
| 42 | * |
| 43 | */ |
| 44 | static void ufshcd_dwc_program_clk_div(struct ufs_hba *hba, u32 divider_val) |
| 45 | { |
| 46 | ufshcd_writel(hba, divider_val, DWC_UFS_REG_HCLKDIV); |
| 47 | } |
| 48 | |
| 49 | /** |
| 50 | * ufshcd_dwc_link_is_up() - check if link is up. |
| 51 | * @hba: private structure pointer |
| 52 | * |
| 53 | * Return: 0 on success, non-zero value on failure. |
| 54 | */ |
| 55 | static int ufshcd_dwc_link_is_up(struct ufs_hba *hba) |
| 56 | { |
| 57 | int dme_result = 0; |
| 58 | |
| 59 | ufshcd_dme_get(hba, UIC_ARG_MIB(VS_POWERSTATE), &dme_result); |
| 60 | |
| 61 | if (dme_result == UFSHCD_LINK_IS_UP) |
| 62 | return 0; |
| 63 | |
| 64 | return 1; |
| 65 | } |
| 66 | |
| 67 | /** |
| 68 | * ufshcd_dwc_connection_setup() - configure unipro attributes. |
| 69 | * @hba: pointer to drivers private data |
| 70 | * |
| 71 | * This function configures both the local side (host) and the peer side |
| 72 | * (device) unipro attributes to establish the connection to application/ |
| 73 | * cport. |
| 74 | * This function is not required if the hardware is properly configured to |
| 75 | * have this connection setup on reset. But invoking this function does no |
| 76 | * harm and should be fine even working with any ufs device. |
| 77 | * |
| 78 | * Return: 0 on success non-zero value on failure. |
| 79 | */ |
| 80 | static int ufshcd_dwc_connection_setup(struct ufs_hba *hba) |
| 81 | { |
| 82 | static const struct ufshcd_dme_attr_val setup_attrs[] = { |
| 83 | { UIC_ARG_MIB(T_CONNECTIONSTATE), 0, DME_LOCAL }, |
| 84 | { UIC_ARG_MIB(N_DEVICEID), 0, DME_LOCAL }, |
| 85 | { UIC_ARG_MIB(N_DEVICEID_VALID), 0, DME_LOCAL }, |
| 86 | { UIC_ARG_MIB(T_PEERDEVICEID), 1, DME_LOCAL }, |
| 87 | { UIC_ARG_MIB(T_PEERCPORTID), 0, DME_LOCAL }, |
| 88 | { UIC_ARG_MIB(T_TRAFFICCLASS), 0, DME_LOCAL }, |
| 89 | { UIC_ARG_MIB(T_CPORTFLAGS), 0x6, DME_LOCAL }, |
| 90 | { UIC_ARG_MIB(T_CPORTMODE), 1, DME_LOCAL }, |
| 91 | { UIC_ARG_MIB(T_CONNECTIONSTATE), 1, DME_LOCAL }, |
| 92 | { UIC_ARG_MIB(T_CONNECTIONSTATE), 0, DME_PEER }, |
| 93 | { UIC_ARG_MIB(N_DEVICEID), 1, DME_PEER }, |
| 94 | { UIC_ARG_MIB(N_DEVICEID_VALID), 1, DME_PEER }, |
| 95 | { UIC_ARG_MIB(T_PEERDEVICEID), 1, DME_PEER }, |
| 96 | { UIC_ARG_MIB(T_PEERCPORTID), 0, DME_PEER }, |
| 97 | { UIC_ARG_MIB(T_TRAFFICCLASS), 0, DME_PEER }, |
| 98 | { UIC_ARG_MIB(T_CPORTFLAGS), 0x6, DME_PEER }, |
| 99 | { UIC_ARG_MIB(T_CPORTMODE), 1, DME_PEER }, |
| 100 | { UIC_ARG_MIB(T_CONNECTIONSTATE), 1, DME_PEER } |
| 101 | }; |
| 102 | return ufshcd_dwc_dme_set_attrs(hba, setup_attrs, ARRAY_SIZE(setup_attrs)); |
| 103 | } |
| 104 | |
| 105 | /** |
| 106 | * ufshcd_dwc_link_startup_notify() - program clock divider. |
| 107 | * @hba: private structure pointer |
| 108 | * @status: Callback notify status |
| 109 | * |
| 110 | * Return: 0 on success, non-zero value on failure. |
| 111 | */ |
| 112 | int ufshcd_dwc_link_startup_notify(struct ufs_hba *hba, |
| 113 | enum ufs_notify_change_status status) |
| 114 | { |
| 115 | int err = 0; |
| 116 | |
| 117 | if (status == PRE_CHANGE) { |
| 118 | ufshcd_dwc_program_clk_div(hba, DWC_UFS_REG_HCLKDIV_DIV_125); |
| 119 | } else { /* POST_CHANGE */ |
| 120 | err = ufshcd_dwc_link_is_up(hba); |
| 121 | if (err) { |
| 122 | dev_err(hba->dev, "Link is not up\n"); |
| 123 | return err; |
| 124 | } |
| 125 | |
| 126 | err = ufshcd_dwc_connection_setup(hba); |
| 127 | if (err) |
| 128 | dev_err(hba->dev, "Connection setup failed (%d)\n", |
| 129 | err); |
| 130 | } |
| 131 | |
| 132 | return err; |
| 133 | } |