Peng Fan | 28ed72c | 2021-08-07 16:01:12 +0800 | [diff] [blame^] | 1 | // SPDX-License-Identifier: (GPL-2.0 OR MIT) |
| 2 | /* |
| 3 | * Copyright 2021 NXP |
| 4 | */ |
| 5 | |
| 6 | #include <dt-bindings/clock/imx8ulp-clock.h> |
| 7 | #include <dt-bindings/gpio/gpio.h> |
| 8 | #include <dt-bindings/interrupt-controller/arm-gic.h> |
| 9 | #include "imx8ulp-pinfunc.h" |
| 10 | |
| 11 | / { |
| 12 | interrupt-parent = <&gic>; |
| 13 | #address-cells = <2>; |
| 14 | #size-cells = <2>; |
| 15 | |
| 16 | aliases { |
| 17 | gpio0 = &gpiod; |
| 18 | gpio1 = &gpioe; |
| 19 | gpio2 = &gpiof; |
| 20 | serial0 = &lpuart5; |
| 21 | mmc0 = &usdhc0; |
| 22 | mmc1 = &usdhc1; |
| 23 | mmc2 = &usdhc2; |
| 24 | spi0 = &flexspi0; |
| 25 | spi2 = &flexspi2; |
| 26 | ethernet0 = &fec; |
| 27 | i2c7 = &lpi2c7; |
| 28 | usbphy0 = &usbphy0; |
| 29 | usb0 = &usbotg0; |
| 30 | usbphy1 = &usbphy1; |
| 31 | usb1 = &usbotg1; |
| 32 | }; |
| 33 | |
| 34 | cpus: cpus { |
| 35 | #address-cells = <2>; |
| 36 | #size-cells = <0>; |
| 37 | |
| 38 | idle-states { |
| 39 | entry-method = "psci"; |
| 40 | |
| 41 | CPU_SLEEP: cpu-sleep { |
| 42 | compatible = "arm,idle-state"; |
| 43 | arm,psci-suspend-param = <0x0010033>; |
| 44 | local-timer-stop; |
| 45 | entry-latency-us = <1000>; |
| 46 | exit-latency-us = <700>; |
| 47 | min-residency-us = <2700>; |
| 48 | wakeup-latency-us = <1500>; |
| 49 | }; |
| 50 | }; |
| 51 | |
| 52 | /* We have 1 clusters with 4 Cortex-A35 cores */ |
| 53 | A35_0: cpu@0 { |
| 54 | device_type = "cpu"; |
| 55 | compatible = "arm,cortex-a35"; |
| 56 | reg = <0x0 0x0>; |
| 57 | enable-method = "psci"; |
| 58 | next-level-cache = <&A35_L2>; |
| 59 | clocks = <&cgc1 IMX8ULP_CLK_A35_DIV>; |
| 60 | }; |
| 61 | |
| 62 | A35_1: cpu@1 { |
| 63 | device_type = "cpu"; |
| 64 | compatible = "arm,cortex-a35"; |
| 65 | reg = <0x0 0x1>; |
| 66 | enable-method = "psci"; |
| 67 | next-level-cache = <&A35_L2>; |
| 68 | clocks = <&cgc1 IMX8ULP_CLK_A35_DIV>; |
| 69 | }; |
| 70 | |
| 71 | A35_L2: l2-cache0 { |
| 72 | compatible = "cache"; |
| 73 | }; |
| 74 | }; |
| 75 | |
| 76 | a35_opp_table: opp-table { |
| 77 | compatible = "operating-points-v2"; |
| 78 | opp-shared; |
| 79 | |
| 80 | opp-504000000 { |
| 81 | opp-hz = /bits/ 64 <504000000>; |
| 82 | opp-microvolt = <800000>; |
| 83 | clock-latency-ns = <150000>; |
| 84 | }; |
| 85 | |
| 86 | opp-744000000 { |
| 87 | opp-hz = /bits/ 64 <744000000>; |
| 88 | opp-microvolt = <900000>; |
| 89 | clock-latency-ns = <150000>; |
| 90 | }; |
| 91 | |
| 92 | opp-1008000000 { |
| 93 | opp-hz = /bits/ 64 <1008000000>; |
| 94 | opp-microvolt = <1000000>; |
| 95 | clock-latency-ns = <150000>; |
| 96 | opp-suspend; |
| 97 | }; |
| 98 | }; |
| 99 | |
| 100 | s400_mu: mu@27020000 { |
| 101 | u-boot,dm-spl; |
| 102 | compatible = "fsl,imx8ulp-mu"; |
| 103 | reg = <0 0x27020000 0 0x10000>; |
| 104 | status = "okay"; |
| 105 | }; |
| 106 | |
| 107 | gic: interrupt-controller@2d400000 { |
| 108 | compatible = "arm,gic-v3"; |
| 109 | reg = <0x0 0x2d400000 0 0x10000>, /* GIC Dist */ |
| 110 | <0x0 0x2d440000 0 0xc0000>; /* GICR (RD_base + SGI_base) */ |
| 111 | #interrupt-cells = <3>; |
| 112 | interrupt-controller; |
| 113 | interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; |
| 114 | }; |
| 115 | |
| 116 | psci { |
| 117 | compatible = "arm,psci-1.0"; |
| 118 | method = "smc"; |
| 119 | }; |
| 120 | |
| 121 | timer { |
| 122 | compatible = "arm,armv8-timer"; |
| 123 | interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* Physical Secure */ |
| 124 | <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* Physical Non-Secure */ |
| 125 | <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* Virtual */ |
| 126 | <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor */ |
| 127 | }; |
| 128 | |
| 129 | frosc: clock-frosc { |
| 130 | compatible = "fixed-clock"; |
| 131 | clock-frequency = <192000000>; |
| 132 | clock-output-names = "frosc"; |
| 133 | #clock-cells = <0>; |
| 134 | }; |
| 135 | |
| 136 | lposc: clock-lposc { |
| 137 | compatible = "fixed-clock"; |
| 138 | clock-frequency = <1000000>; |
| 139 | clock-output-names = "lposc"; |
| 140 | #clock-cells = <0>; |
| 141 | }; |
| 142 | |
| 143 | rosc: clock-rosc { |
| 144 | compatible = "fixed-clock"; |
| 145 | clock-frequency = <32768>; |
| 146 | clock-output-names = "rosc"; |
| 147 | #clock-cells = <0>; |
| 148 | }; |
| 149 | |
| 150 | sosc: clock-sosc { |
| 151 | compatible = "fixed-clock"; |
| 152 | clock-frequency = <24000000>; |
| 153 | clock-output-names = "sosc"; |
| 154 | #clock-cells = <0>; |
| 155 | }; |
| 156 | |
| 157 | sram@0x2201f000 { |
| 158 | compatible = "mmio-sram"; |
| 159 | reg = <0x0 0x2201f000 0x0 0x1000>; |
| 160 | |
| 161 | #address-cells = <1>; |
| 162 | #size-cells = <1>; |
| 163 | ranges = <0 0x0 0x2201f000 0x1000>; |
| 164 | |
| 165 | /* TODO: split or unify */ |
| 166 | scmi_pd: scmi_pd@0 { |
| 167 | compatible = "arm,scmi-shmem"; |
| 168 | reg = <0x0 0x200>; |
| 169 | }; |
| 170 | }; |
| 171 | |
| 172 | firmware { |
| 173 | scmi { |
| 174 | compatible = "arm,scmi-smc"; |
| 175 | arm,smc-id = <0xc20000fe>; |
| 176 | #address-cells = <1>; |
| 177 | #size-cells = <0>; |
| 178 | shmem = <&scmi_pd>; |
| 179 | |
| 180 | scmi_devpd: protocol@11 { |
| 181 | reg = <0x11>; |
| 182 | #power-domain-cells = <1>; |
| 183 | }; |
| 184 | |
| 185 | scmi_perf: protocol@13 { |
| 186 | reg = <0x13>; |
| 187 | }; |
| 188 | }; |
| 189 | }; |
| 190 | |
| 191 | soc@0 { |
| 192 | compatible = "simple-bus"; |
| 193 | #address-cells = <1>; |
| 194 | #size-cells = <1>; |
| 195 | ranges = <0x0 0x0 0x0 0x80000000>; |
| 196 | |
| 197 | per_bridge0: bus@28000000 { |
| 198 | compatible = "simple-bus"; |
| 199 | reg = <0x28000000 0x800000>; |
| 200 | #address-cells = <1>; |
| 201 | #size-cells = <1>; |
| 202 | ranges; |
| 203 | |
| 204 | flexspi0: flexspi@28039000 { |
| 205 | #address-cells = <1>; |
| 206 | #size-cells = <0>; |
| 207 | compatible = "nxp,imx8ulp-fspi"; |
| 208 | reg = <0x28039000 0x10000>, |
| 209 | <0x04000000 0x7ffffff>; |
| 210 | reg-names = "fspi_base", "fspi_mmap"; |
| 211 | status = "disabled"; |
| 212 | }; |
| 213 | }; |
| 214 | |
| 215 | per_bridge3: bus@29000000 { |
| 216 | compatible = "simple-bus"; |
| 217 | reg = <0x29000000 0x800000>; |
| 218 | #address-cells = <1>; |
| 219 | #size-cells = <1>; |
| 220 | ranges; |
| 221 | |
| 222 | edma1: dma-controller@29010000 { |
| 223 | compatible = "fsl,imx8ulp-edma"; |
| 224 | reg = <0x29010000 0x10000>, |
| 225 | <0x29020000 0x10000>, <0x29030000 0x10000>, |
| 226 | <0x29040000 0x10000>, <0x29050000 0x10000>, |
| 227 | <0x29060000 0x10000>, <0x29070000 0x10000>, |
| 228 | <0x29080000 0x10000>, <0x29090000 0x10000>, |
| 229 | <0x290a0000 0x10000>, <0x290b0000 0x10000>, |
| 230 | <0x290c0000 0x10000>, <0x290d0000 0x10000>, |
| 231 | <0x290e0000 0x10000>, <0x290f0000 0x10000>, |
| 232 | <0x29100000 0x10000>, <0x29110000 0x10000>, |
| 233 | <0x29120000 0x10000>, <0x29130000 0x10000>, |
| 234 | <0x29140000 0x10000>, <0x29150000 0x10000>, |
| 235 | <0x29160000 0x10000>, <0x29170000 0x10000>, |
| 236 | <0x29180000 0x10000>, <0x29190000 0x10000>, |
| 237 | <0x291a0000 0x10000>, <0x291b0000 0x10000>, |
| 238 | <0x291c0000 0x10000>, <0x291d0000 0x10000>, |
| 239 | <0x291e0000 0x10000>, <0x291f0000 0x10000>, |
| 240 | <0x29200000 0x10000>, <0x29210000 0x10000>; |
| 241 | #dma-cells = <3>; |
| 242 | dma-channels = <32>; |
| 243 | interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, |
| 244 | <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, |
| 245 | <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, |
| 246 | <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, |
| 247 | <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, |
| 248 | <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, |
| 249 | <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, |
| 250 | <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, |
| 251 | <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, |
| 252 | <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, |
| 253 | <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, |
| 254 | <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, |
| 255 | <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, |
| 256 | <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, |
| 257 | <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, |
| 258 | <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, |
| 259 | <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, |
| 260 | <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, |
| 261 | <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, |
| 262 | <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, |
| 263 | <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, |
| 264 | <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, |
| 265 | <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, |
| 266 | <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>, |
| 267 | <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, |
| 268 | <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, |
| 269 | <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, |
| 270 | <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>, |
| 271 | <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>, |
| 272 | <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, |
| 273 | <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, |
| 274 | <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; |
| 275 | interrupt-names = "edma1-chan0-tx", "edma1-chan1-tx", |
| 276 | "edma1-chan2-tx", "edma1-chan3-tx", |
| 277 | "edma1-chan4-tx", "edma1-chan5-tx", |
| 278 | "edma1-chan6-tx", "edma1-chan7-tx", |
| 279 | "edma1-chan8-tx", "edma1-chan9-tx", |
| 280 | "edma1-chan10-tx", "edma1-chan11-tx", |
| 281 | "edma1-chan12-tx", "edma1-chan13-tx", |
| 282 | "edma1-chan14-tx", "edma1-chan15-tx", |
| 283 | "edma1-chan16-tx", "edma1-chan17-tx", |
| 284 | "edma1-chan18-tx", "edma1-chan19-tx", |
| 285 | "edma1-chan20-tx", "edma1-chan21-tx", |
| 286 | "edma1-chan22-tx", "edma1-chan23-tx", |
| 287 | "edma1-chan24-tx", "edma1-chan25-tx", |
| 288 | "edma1-chan26-tx", "edma1-chan27-tx", |
| 289 | "edma1-chan28-tx", "edma1-chan29-tx", |
| 290 | "edma1-chan30-tx", "edma1-chan31-tx"; |
| 291 | clocks = <&pcc3 IMX8ULP_CLK_DMA1_MP>, |
| 292 | <&pcc3 IMX8ULP_CLK_DMA1_CH0>, <&pcc3 IMX8ULP_CLK_DMA1_CH1>, |
| 293 | <&pcc3 IMX8ULP_CLK_DMA1_CH2>, <&pcc3 IMX8ULP_CLK_DMA1_CH3>, |
| 294 | <&pcc3 IMX8ULP_CLK_DMA1_CH4>, <&pcc3 IMX8ULP_CLK_DMA1_CH5>, |
| 295 | <&pcc3 IMX8ULP_CLK_DMA1_CH6>, <&pcc3 IMX8ULP_CLK_DMA1_CH7>, |
| 296 | <&pcc3 IMX8ULP_CLK_DMA1_CH8>, <&pcc3 IMX8ULP_CLK_DMA1_CH9>, |
| 297 | <&pcc3 IMX8ULP_CLK_DMA1_CH10>, <&pcc3 IMX8ULP_CLK_DMA1_CH11>, |
| 298 | <&pcc3 IMX8ULP_CLK_DMA1_CH12>, <&pcc3 IMX8ULP_CLK_DMA1_CH13>, |
| 299 | <&pcc3 IMX8ULP_CLK_DMA1_CH14>, <&pcc3 IMX8ULP_CLK_DMA1_CH15>, |
| 300 | <&pcc3 IMX8ULP_CLK_DMA1_CH16>, <&pcc3 IMX8ULP_CLK_DMA1_CH17>, |
| 301 | <&pcc3 IMX8ULP_CLK_DMA1_CH18>, <&pcc3 IMX8ULP_CLK_DMA1_CH19>, |
| 302 | <&pcc3 IMX8ULP_CLK_DMA1_CH20>, <&pcc3 IMX8ULP_CLK_DMA1_CH21>, |
| 303 | <&pcc3 IMX8ULP_CLK_DMA1_CH22>, <&pcc3 IMX8ULP_CLK_DMA1_CH23>, |
| 304 | <&pcc3 IMX8ULP_CLK_DMA1_CH24>, <&pcc3 IMX8ULP_CLK_DMA1_CH25>, |
| 305 | <&pcc3 IMX8ULP_CLK_DMA1_CH26>, <&pcc3 IMX8ULP_CLK_DMA1_CH27>, |
| 306 | <&pcc3 IMX8ULP_CLK_DMA1_CH28>, <&pcc3 IMX8ULP_CLK_DMA1_CH29>, |
| 307 | <&pcc3 IMX8ULP_CLK_DMA1_CH30>, <&pcc3 IMX8ULP_CLK_DMA1_CH31>; |
| 308 | clock-names = "edma-mp-clk", |
| 309 | "edma1-chan0-clk", "edma1-chan1-clk", |
| 310 | "edma1-chan2-clk", "edma1-chan3-clk", |
| 311 | "edma1-chan4-clk", "edma1-chan5-clk", |
| 312 | "edma1-chan6-clk", "edma1-chan7-clk", |
| 313 | "edma1-chan8-clk", "edma1-chan9-clk", |
| 314 | "edma1-chan10-clk", "edma1-chan11-clk", |
| 315 | "edma1-chan12-clk", "edma1-chan13-clk", |
| 316 | "edma1-chan14-clk", "edma1-chan15-clk", |
| 317 | "edma1-chan16-clk", "edma1-chan17-clk", |
| 318 | "edma1-chan18-clk", "edma1-chan19-clk", |
| 319 | "edma1-chan20-clk", "edma1-chan21-clk", |
| 320 | "edma1-chan22-clk", "edma1-chan23-clk", |
| 321 | "edma1-chan24-clk", "edma1-chan25-clk", |
| 322 | "edma1-chan26-clk", "edma1-chan27-clk", |
| 323 | "edma1-chan28-clk", "edma1-chan29-clk", |
| 324 | "edma1-chan30-clk", "edma1-chan31-clk"; |
| 325 | status = "okay"; |
| 326 | }; |
| 327 | |
| 328 | wdog3: watchdog@292a0000 { |
| 329 | compatible = "fsl,imx8ulp-wdt", "fsl,imx7ulp-wdt"; |
| 330 | reg = <0x292a0000 0x10000>; |
| 331 | interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; |
| 332 | clocks = <&pcc3 IMX8ULP_CLK_WDOG3>; |
| 333 | assigned-clocks = <&pcc3 IMX8ULP_CLK_WDOG3>; |
| 334 | assigned-clocks-parents = <&cgc1 IMX8ULP_CLK_SOSC_DIV2>; |
| 335 | timeout-sec = <40>; |
| 336 | }; |
| 337 | |
| 338 | cgc1: clock-controller@292c0000 { |
| 339 | compatible = "fsl,imx8ulp-cgc1"; |
| 340 | reg = <0x292c0000 0x10000>; |
| 341 | clocks = <&rosc>, <&sosc>, <&frosc>, <&lposc>; |
| 342 | clock-names = "rosc", "sosc", "frosc", "lposc"; |
| 343 | #clock-cells = <1>; |
| 344 | }; |
| 345 | |
| 346 | pcc3: clock-controller@292d0000 { |
| 347 | compatible = "fsl,imx8ulp-pcc3"; |
| 348 | reg = <0x292d0000 0x10000>; |
| 349 | #clock-cells = <1>; |
| 350 | }; |
| 351 | |
| 352 | tpm5: tpm@29340000 { |
| 353 | compatible = "fsl,imx8ulp-tpm", "fsl,imx7ulp-tpm"; |
| 354 | reg = <0x29340000 0x1000>; |
| 355 | interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; |
| 356 | clocks = <&pcc3 IMX8ULP_CLK_TPM5>, |
| 357 | <&pcc3 IMX8ULP_CLK_TPM5>; |
| 358 | clock-names = "ipg", "per"; |
| 359 | }; |
| 360 | |
| 361 | lpuart4: serial@29390000 { |
| 362 | compatible = "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart"; |
| 363 | reg = <0x29390000 0x1000>; |
| 364 | interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; |
| 365 | clocks = <&pcc3 IMX8ULP_CLK_LPUART4>; |
| 366 | clock-names = "ipg"; |
| 367 | status = "disabled"; |
| 368 | }; |
| 369 | |
| 370 | lpuart5: serial@293a0000 { |
| 371 | compatible = "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart"; |
| 372 | reg = <0x293a0000 0x1000>; |
| 373 | clocks = <&pcc3 IMX8ULP_CLK_LPUART5>; |
| 374 | clock-names = "ipg"; |
| 375 | status = "disabled"; |
| 376 | }; |
| 377 | }; |
| 378 | |
| 379 | per_bridge4: bus@29800000 { |
| 380 | compatible = "simple-bus"; |
| 381 | reg = <0x29800000 0x800000>; |
| 382 | #address-cells = <1>; |
| 383 | #size-cells = <1>; |
| 384 | ranges; |
| 385 | |
| 386 | pcc4: clock-controller@29800000 { |
| 387 | compatible = "fsl,imx8ulp-pcc4"; |
| 388 | reg = <0x29800000 0x10000>; |
| 389 | #clock-cells = <1>; |
| 390 | }; |
| 391 | |
| 392 | lpi2c6: lpi2c6@29840000 { |
| 393 | compatible = "fsl,imx8ulp-lpi2c", "fsl,imx7ulp-lpi2c"; |
| 394 | reg = <0x29840000 0x10000>; |
| 395 | interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; |
| 396 | clocks = <&pcc4 IMX8ULP_CLK_LPI2C6>, |
| 397 | <&pcc4 IMX8ULP_CLK_LPI2C6>; |
| 398 | clock-names = "per", "ipg"; |
| 399 | status = "disabled"; |
| 400 | }; |
| 401 | |
| 402 | lpi2c7: lpi2c7@29850000 { |
| 403 | compatible = "fsl,imx8ulp-lpi2c", "fsl,imx7ulp-lpi2c"; |
| 404 | reg = <0x29850000 0x10000>; |
| 405 | interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; |
| 406 | clocks = <&pcc4 IMX8ULP_CLK_LPI2C7>, |
| 407 | <&pcc4 IMX8ULP_CLK_LPI2C7>; |
| 408 | clock-names = "per", "ipg"; |
| 409 | status = "disabled"; |
| 410 | }; |
| 411 | |
| 412 | flexspi2: flexspi@29810000 { |
| 413 | #address-cells = <1>; |
| 414 | #size-cells = <0>; |
| 415 | compatible = "nxp,imx8ulp-fspi"; |
| 416 | reg = <0x29810000 0x10000>, |
| 417 | <0x60000000 0xfffffff>; |
| 418 | reg-names = "fspi_base", "fspi_mmap"; |
| 419 | status = "disabled"; |
| 420 | }; |
| 421 | |
| 422 | flexspi2_nand: flexspi2_nand@29810000 { |
| 423 | #address-cells = <1>; |
| 424 | #size-cells = <0>; |
| 425 | compatible = "fsl,imx8-fspi-nand"; |
| 426 | reg = <0x29810000 0x10000>, <0x60000000 0x10000000>; |
| 427 | reg-names = "FlexSPI", "FlexSPI-memory"; |
| 428 | status = "disabled"; |
| 429 | }; |
| 430 | |
| 431 | iomuxc1: pinctrl@298c0000 { |
| 432 | compatible = "fsl,imx8ulp-iomuxc1"; |
| 433 | reg = <0x298c0000 0x10000>; |
| 434 | fsl,mux_mask = <0xf00>; |
| 435 | }; |
| 436 | |
| 437 | usdhc0: mmc@298d0000 { |
| 438 | compatible = "fsl,imx8ulp-usdhc", "fsl,imx7ulp-usdhc"; |
| 439 | reg = <0x298d0000 0x10000>; |
| 440 | interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>; |
| 441 | clocks = <&cgc1 IMX8ULP_CLK_DUMMY>, |
| 442 | <&cgc1 IMX8ULP_CLK_DUMMY>, |
| 443 | <&pcc4 IMX8ULP_CLK_USDHC0>; |
| 444 | clock-names = "ipg", "ahb", "per"; |
| 445 | fsl,tuning-start-tap = <20>; |
| 446 | fsl,tuning-step= <2>; |
| 447 | bus-width = <4>; |
| 448 | status = "disabled"; |
| 449 | }; |
| 450 | |
| 451 | usdhc1: mmc@298e0000 { |
| 452 | compatible = "fsl,imx8ulp-usdhc", "fsl,imx7ulp-usdhc"; |
| 453 | reg = <0x298e0000 0x10000>; |
| 454 | interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; |
| 455 | clocks = <&cgc1 IMX8ULP_CLK_DUMMY>, |
| 456 | <&cgc1 IMX8ULP_CLK_DUMMY>, |
| 457 | <&pcc4 IMX8ULP_CLK_USDHC1>; |
| 458 | clock-names = "ipg", "ahb", "per"; |
| 459 | fsl,tuning-start-tap = <20>; |
| 460 | fsl,tuning-step= <2>; |
| 461 | bus-width = <4>; |
| 462 | status = "disabled"; |
| 463 | }; |
| 464 | |
| 465 | usdhc2: mmc@298f0000 { |
| 466 | compatible = "fsl,imx8ulp-usdhc", "fsl,imx8mm-usdhc"; |
| 467 | reg = <0x298f0000 0x10000>; |
| 468 | interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; |
| 469 | clocks = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>, |
| 470 | <&cgc1 IMX8ULP_CLK_NIC_PER_DIVPLAT>, |
| 471 | <&pcc4 IMX8ULP_CLK_USDHC2>; |
| 472 | clock-names = "ipg", "ahb", "per"; |
| 473 | assigned-clocks = <&cgc1 IMX8ULP_CLK_SPLL3_PFD2>, <&pcc4 IMX8ULP_CLK_USDHC2>; |
| 474 | assigned-clock-parents = <0>, <&cgc1 IMX8ULP_CLK_SPLL3_PFD2_DIV1>; |
| 475 | assigned-clock-rates = <396000000>, <396000000>; |
| 476 | fsl,tuning-start-tap = <20>; |
| 477 | fsl,tuning-step= <2>; |
| 478 | bus-width = <4>; |
| 479 | status = "disabled"; |
| 480 | }; |
| 481 | |
| 482 | usbotg0: usb@29900000 { |
| 483 | compatible = "fsl,imx8ulp-usb", "fsl,imx7ulp-usb", |
| 484 | "fsl,imx27-usb"; |
| 485 | reg = <0x29900000 0x200>; |
| 486 | interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; |
| 487 | clocks = <&pcc4 IMX8ULP_CLK_USB0>; |
| 488 | fsl,usbphy = <&usbphy0>; |
| 489 | fsl,usbmisc = <&usbmisc0 0>; |
| 490 | ahb-burst-config = <0x0>; |
| 491 | tx-burst-size-dword = <0x8>; |
| 492 | rx-burst-size-dword = <0x8>; |
| 493 | status = "disabled"; |
| 494 | }; |
| 495 | |
| 496 | usbmisc0: usbmisc@29900200 { |
| 497 | #index-cells = <1>; |
| 498 | compatible = "fsl,imx8ulp-usbmisc", "fsl,imx7ulp-usbmisc", |
| 499 | "fsl,imx6q-usbmisc"; |
| 500 | reg = <0x29900200 0x200>; |
| 501 | }; |
| 502 | |
| 503 | usbphy0: usbphy@29910000 { |
| 504 | compatible = "fsl,imx8ulp-usbphy", |
| 505 | "fsl,imx7ulp-usbphy", "fsl,imx23-usbphy"; |
| 506 | reg = <0x29910000 0x1000>; |
| 507 | interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; |
| 508 | clocks = <&pcc4 IMX8ULP_CLK_USB0_PHY>; |
| 509 | }; |
| 510 | |
| 511 | usbotg1: usb@29920000 { |
| 512 | compatible = "fsl,imx8ulp-usb", "fsl,imx7ulp-usb", |
| 513 | "fsl,imx27-usb"; |
| 514 | reg = <0x29920000 0x200>; |
| 515 | interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; |
| 516 | clocks = <&pcc4 IMX8ULP_CLK_USB1>; |
| 517 | fsl,usbphy = <&usbphy1>; |
| 518 | fsl,usbmisc = <&usbmisc1 0>; |
| 519 | ahb-burst-config = <0x0>; |
| 520 | tx-burst-size-dword = <0x8>; |
| 521 | rx-burst-size-dword = <0x8>; |
| 522 | status = "disabled"; |
| 523 | }; |
| 524 | |
| 525 | usbmisc1: usbmisc@29920200 { |
| 526 | #index-cells = <1>; |
| 527 | compatible = "fsl,imx8ulp-usbmisc", "fsl,imx7ulp-usbmisc", |
| 528 | "fsl,imx6q-usbmisc"; |
| 529 | reg = <0x29920200 0x200>; |
| 530 | }; |
| 531 | |
| 532 | usbphy1: usbphy@29930000 { |
| 533 | compatible = "fsl,imx8ulp-usbphy", |
| 534 | "fsl,imx7ulp-usbphy", "fsl,imx23-usbphy"; |
| 535 | reg = <0x29930000 0x1000>; |
| 536 | interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; |
| 537 | clocks = <&pcc4 IMX8ULP_CLK_USB1_PHY>; |
| 538 | }; |
| 539 | |
| 540 | fec: ethernet@29950000 { |
| 541 | compatible = "fsl,imx8ulp-fec", "fsl,imx6sx-fec"; |
| 542 | reg = <0x29950000 0x10000>; |
| 543 | interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; |
| 544 | clocks = <&pcc4 IMX8ULP_CLK_ENET>, |
| 545 | <&pcc4 IMX8ULP_CLK_ENET>, |
| 546 | <&cgc1 IMX8ULP_CLK_ENETSTAMP_SEL>, |
| 547 | <&pcc4 IMX8ULP_CLK_ENET>, |
| 548 | <&pcc4 IMX8ULP_CLK_ENET>; |
| 549 | clock-names = "ipg", "ahb", "ptp", |
| 550 | "enet_clk_ref", "enet_out"; |
| 551 | fsl,num-tx-queues = <3>; |
| 552 | fsl,num-rx-queues = <3>; |
| 553 | status = "disabled"; |
| 554 | }; |
| 555 | |
| 556 | }; |
| 557 | |
| 558 | gpioe: gpio@2d000000 { |
| 559 | compatible = "fsl,imx7ulp-gpio", "fsl,vf610-gpio"; |
| 560 | reg = <0x2d000080 0x1000 0x2d000040 0x40>; |
| 561 | gpio-controller; |
| 562 | #gpio-cells = <2>; |
| 563 | interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>; |
| 564 | interrupt-controller; |
| 565 | #interrupt-cells = <2>; |
| 566 | clocks = <&pcc4 IMX8ULP_CLK_RGPIOE>, |
| 567 | <&pcc4 IMX8ULP_CLK_PCTLE>; |
| 568 | clock-names = "gpio", "port"; |
| 569 | gpio-ranges = <&iomuxc1 0 32 24>; |
| 570 | }; |
| 571 | |
| 572 | gpiof: gpio@2d010000 { |
| 573 | compatible = "fsl,imx7ulp-gpio", "fsl,vf610-gpio"; |
| 574 | reg = <0x2d010080 0x1000 0x2d010040 0x40>; |
| 575 | gpio-controller; |
| 576 | #gpio-cells = <2>; |
| 577 | interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; |
| 578 | interrupt-controller; |
| 579 | #interrupt-cells = <2>; |
| 580 | clocks = <&pcc4 IMX8ULP_CLK_RGPIOF>, |
| 581 | <&pcc4 IMX8ULP_CLK_PCTLF>; |
| 582 | clock-names = "gpio", "port"; |
| 583 | gpio-ranges = <&iomuxc1 0 64 24>; |
| 584 | }; |
| 585 | |
| 586 | per_bridge5: bus@2d800000 { |
| 587 | compatible = "simple-bus"; |
| 588 | reg = <0x2d800000 0x800000>; |
| 589 | #address-cells = <1>; |
| 590 | #size-cells = <1>; |
| 591 | ranges; |
| 592 | |
| 593 | edma2: dma-controller@2d800000 { |
| 594 | compatible = "fsl,imx8ulp-edma"; |
| 595 | reg = <0x2d800000 0x10000>, |
| 596 | <0x2d810000 0x10000>, <0x2d820000 0x10000>, |
| 597 | <0x2d830000 0x10000>, <0x2d840000 0x10000>, |
| 598 | <0x2d850000 0x10000>, <0x2d860000 0x10000>, |
| 599 | <0x2d870000 0x10000>, <0x2d880000 0x10000>, |
| 600 | <0x2d890000 0x10000>, <0x2d8a0000 0x10000>, |
| 601 | <0x2d8b0000 0x10000>, <0x2d8c0000 0x10000>, |
| 602 | <0x2d8d0000 0x10000>, <0x2d8e0000 0x10000>, |
| 603 | <0x2d8f0000 0x10000>, <0x2d900000 0x10000>, |
| 604 | <0x2d910000 0x10000>, <0x2d920000 0x10000>, |
| 605 | <0x2d930000 0x10000>, <0x2d940000 0x10000>, |
| 606 | <0x2d950000 0x10000>, <0x2d960000 0x10000>, |
| 607 | <0x2d970000 0x10000>, <0x2d980000 0x10000>, |
| 608 | <0x2d990000 0x10000>, <0x2d9a0000 0x10000>, |
| 609 | <0x2d9b0000 0x10000>, <0x2d9c0000 0x10000>, |
| 610 | <0x2d9d0000 0x10000>, <0x2d9e0000 0x10000>, |
| 611 | <0x2d9f0000 0x10000>, <0x2da00000 0x10000>; |
| 612 | #dma-cells = <3>; |
| 613 | dma-channels = <32>; |
| 614 | interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, |
| 615 | <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, |
| 616 | <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, |
| 617 | <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, |
| 618 | <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, |
| 619 | <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, |
| 620 | <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, |
| 621 | <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, |
| 622 | <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, |
| 623 | <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, |
| 624 | <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, |
| 625 | <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, |
| 626 | <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, |
| 627 | <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, |
| 628 | <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, |
| 629 | <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, |
| 630 | <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, |
| 631 | <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, |
| 632 | <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>, |
| 633 | <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, |
| 634 | <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, |
| 635 | <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, |
| 636 | <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, |
| 637 | <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, |
| 638 | <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, |
| 639 | <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, |
| 640 | <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, |
| 641 | <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, |
| 642 | <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, |
| 643 | <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>, |
| 644 | <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>, |
| 645 | <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; |
| 646 | interrupt-names = "edma2-chan0-tx", "edma2-chan1-tx", |
| 647 | "edma2-chan2-tx", "edma2-chan3-tx", |
| 648 | "edma2-chan4-tx", "edma2-chan5-tx", |
| 649 | "edma2-chan6-tx", "edma2-chan7-tx", |
| 650 | "edma2-chan8-tx", "edma2-chan9-tx", |
| 651 | "edma2-chan10-tx", "edma2-chan11-tx", |
| 652 | "edma2-chan12-tx", "edma2-chan13-tx", |
| 653 | "edma2-chan14-tx", "edma2-chan15-tx", |
| 654 | "edma2-chan16-tx", "edma2-chan17-tx", |
| 655 | "edma2-chan18-tx", "edma2-chan19-tx", |
| 656 | "edma2-chan20-tx", "edma2-chan21-tx", |
| 657 | "edma2-chan22-tx", "edma2-chan23-tx", |
| 658 | "edma2-chan24-tx", "edma2-chan25-tx", |
| 659 | "edma2-chan26-tx", "edma2-chan27-tx", |
| 660 | "edma2-chan28-tx", "edma2-chan29-tx", |
| 661 | "edma2-chan30-tx", "edma2-chan31-tx"; |
| 662 | clocks = <&pcc5 IMX8ULP_CLK_DMA2_MP>, |
| 663 | <&pcc5 IMX8ULP_CLK_DMA2_CH0>, <&pcc5 IMX8ULP_CLK_DMA2_CH1>, |
| 664 | <&pcc5 IMX8ULP_CLK_DMA2_CH2>, <&pcc5 IMX8ULP_CLK_DMA2_CH3>, |
| 665 | <&pcc5 IMX8ULP_CLK_DMA2_CH4>, <&pcc5 IMX8ULP_CLK_DMA2_CH5>, |
| 666 | <&pcc5 IMX8ULP_CLK_DMA2_CH6>, <&pcc5 IMX8ULP_CLK_DMA2_CH7>, |
| 667 | <&pcc5 IMX8ULP_CLK_DMA2_CH8>, <&pcc5 IMX8ULP_CLK_DMA2_CH9>, |
| 668 | <&pcc5 IMX8ULP_CLK_DMA2_CH10>, <&pcc5 IMX8ULP_CLK_DMA2_CH11>, |
| 669 | <&pcc5 IMX8ULP_CLK_DMA2_CH12>, <&pcc5 IMX8ULP_CLK_DMA2_CH13>, |
| 670 | <&pcc5 IMX8ULP_CLK_DMA2_CH14>, <&pcc5 IMX8ULP_CLK_DMA2_CH15>, |
| 671 | <&pcc5 IMX8ULP_CLK_DMA2_CH16>, <&pcc5 IMX8ULP_CLK_DMA2_CH17>, |
| 672 | <&pcc5 IMX8ULP_CLK_DMA2_CH18>, <&pcc5 IMX8ULP_CLK_DMA2_CH19>, |
| 673 | <&pcc5 IMX8ULP_CLK_DMA2_CH20>, <&pcc5 IMX8ULP_CLK_DMA2_CH21>, |
| 674 | <&pcc5 IMX8ULP_CLK_DMA2_CH22>, <&pcc5 IMX8ULP_CLK_DMA2_CH23>, |
| 675 | <&pcc5 IMX8ULP_CLK_DMA2_CH24>, <&pcc5 IMX8ULP_CLK_DMA2_CH25>, |
| 676 | <&pcc5 IMX8ULP_CLK_DMA2_CH26>, <&pcc5 IMX8ULP_CLK_DMA2_CH27>, |
| 677 | <&pcc5 IMX8ULP_CLK_DMA2_CH28>, <&pcc5 IMX8ULP_CLK_DMA2_CH29>, |
| 678 | <&pcc5 IMX8ULP_CLK_DMA2_CH30>, <&pcc5 IMX8ULP_CLK_DMA2_CH31>; |
| 679 | clock-names = "edma-mp-clk", |
| 680 | "edma2-chan0-clk", "edma2-chan1-clk", |
| 681 | "edma2-chan2-clk", "edma2-chan3-clk", |
| 682 | "edma2-chan4-clk", "edma2-chan5-clk", |
| 683 | "edma2-chan6-clk", "edma2-chan7-clk", |
| 684 | "edma2-chan8-clk", "edma2-chan9-clk", |
| 685 | "edma2-chan10-clk", "edma2-chan11-clk", |
| 686 | "edma2-chan12-clk", "edma2-chan13-clk", |
| 687 | "edma2-chan14-clk", "edma2-chan15-clk", |
| 688 | "edma2-chan16-clk", "edma2-chan17-clk", |
| 689 | "edma2-chan18-clk", "edma2-chan19-clk", |
| 690 | "edma2-chan20-clk", "edma2-chan21-clk", |
| 691 | "edma2-chan22-clk", "edma2-chan23-clk", |
| 692 | "edma2-chan24-clk", "edma2-chan25-clk", |
| 693 | "edma2-chan26-clk", "edma2-chan27-clk", |
| 694 | "edma2-chan28-clk", "edma2-chan29-clk", |
| 695 | "edma2-chan30-clk", "edma2-chan31-clk"; |
| 696 | status = "okay"; |
| 697 | }; |
| 698 | |
| 699 | cgc2: clock-controller@2da60000 { |
| 700 | compatible = "fsl,imx8ulp-cgc2"; |
| 701 | reg = <0x2da60000 0x10000>; |
| 702 | clocks = <&sosc>, <&frosc>; |
| 703 | clock-names = "sosc", "frosc"; |
| 704 | #clock-cells = <1>; |
| 705 | }; |
| 706 | |
| 707 | pcc5: clock-controller@2da70000 { |
| 708 | compatible = "fsl,imx8ulp-pcc5"; |
| 709 | reg = <0x2da70000 0x10000>; |
| 710 | #clock-cells = <1>; |
| 711 | }; |
| 712 | }; |
| 713 | |
| 714 | gpiod: gpio@2e200000 { |
| 715 | compatible = "fsl,imx7ulp-gpio", "fsl,vf610-gpio"; |
| 716 | reg = <0x2e200080 0x1000 0x2e200040 0x40>; |
| 717 | gpio-controller; |
| 718 | #gpio-cells = <2>; |
| 719 | interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; |
| 720 | interrupt-controller; |
| 721 | #interrupt-cells = <2>; |
| 722 | clocks = <&pcc5 IMX8ULP_CLK_RGPIOD>, |
| 723 | <&pcc5 IMX8ULP_CLK_RGPIOD>; |
| 724 | clock-names = "gpio", "port"; |
| 725 | gpio-ranges = <&iomuxc1 0 0 24>; |
| 726 | }; |
| 727 | }; |
| 728 | }; |