| Jerome Brunet | d1e5b14 | 2019-02-12 14:23:25 +0100 | [diff] [blame] | 1 | CONFIG_ARM=y |
| 2 | CONFIG_ARCH_MESON=y |
| 3 | CONFIG_SYS_TEXT_BASE=0x01000000 |
| 4 | CONFIG_MESON_G12A=y |
| 5 | CONFIG_DEBUG_UART_BASE=0xff803000 |
| 6 | CONFIG_DEBUG_UART_CLOCK=24000000 |
| 7 | CONFIG_IDENT_STRING=" u200" |
| 8 | CONFIG_DEBUG_UART=y |
| 9 | CONFIG_NR_DRAM_BANKS=1 |
| 10 | CONFIG_OF_BOARD_SETUP=y |
| 11 | CONFIG_MISC_INIT_R=y |
| 12 | # CONFIG_DISPLAY_CPUINFO is not set |
| 13 | CONFIG_DISPLAY_BOARDINFO=y |
| 14 | # CONFIG_CMD_BDI is not set |
| 15 | # CONFIG_CMD_IMI is not set |
| 16 | CONFIG_CMD_GPIO=y |
| 17 | # CONFIG_CMD_LOADS is not set |
| 18 | CONFIG_CMD_MMC=y |
| 19 | # CONFIG_CMD_SETEXPR is not set |
| 20 | CONFIG_CMD_REGULATOR=y |
| 21 | CONFIG_OF_CONTROL=y |
| 22 | CONFIG_DEFAULT_DEVICE_TREE="meson-g12a-u200" |
| 23 | CONFIG_NET_RANDOM_ETHADDR=y |
| 24 | CONFIG_DM_GPIO=y |
| 25 | CONFIG_DM_MMC=y |
| 26 | CONFIG_MMC_MESON_GX=y |
| 27 | CONFIG_PHY_ADDR_ENABLE=y |
| 28 | CONFIG_PHY_ADDR=8 |
| 29 | CONFIG_DM_ETH=y |
| 30 | CONFIG_ETH_DESIGNWARE=y |
| 31 | CONFIG_PINCTRL=y |
| 32 | CONFIG_PINCTRL_MESON_G12A=y |
| 33 | CONFIG_DM_REGULATOR=y |
| 34 | CONFIG_DM_REGULATOR_FIXED=y |
| 35 | CONFIG_DM_RESET=y |
| 36 | CONFIG_DEBUG_UART_MESON=y |
| 37 | CONFIG_DEBUG_UART_ANNOUNCE=y |
| 38 | CONFIG_DEBUG_UART_SKIP_INIT=y |
| 39 | CONFIG_MESON_SERIAL=y |
| 40 | CONFIG_OF_LIBFDT_OVERLAY=y |