wdenk | 5da7f2f | 2004-01-03 00:43:19 +0000 | [diff] [blame] | 1 | /* |
| 2 | * (C) Copyright 2001 |
| 3 | * John Clemens <clemens@mclx.com>, Mission Critical Linux, Inc. |
| 4 | * |
| 5 | * See file CREDITS for list of people who contributed to this |
| 6 | * project. |
| 7 | * |
| 8 | * This program is free software; you can redistribute it and/or |
| 9 | * modify it under the terms of the GNU General Public License as |
| 10 | * published by the Free Software Foundation; either version 2 of |
| 11 | * the License, or (at your option) any later version. |
| 12 | * |
| 13 | * This program is distributed in the hope that it will be useful, |
| 14 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 15 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 16 | * GNU General Public License for more details. |
| 17 | * |
| 18 | * You should have received a copy of the GNU General Public License |
| 19 | * along with this program; if not, write to the Free Software |
| 20 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| 21 | * MA 02111-1307 USA |
| 22 | */ |
| 23 | |
| 24 | /************************************************************************* |
| 25 | * changes for Marvell DB64460 eval board 2003 by Ingo Assmus <ingo.assmus@keymile.com> |
| 26 | * |
| 27 | ************************************************************************/ |
| 28 | |
| 29 | |
| 30 | /* |
| 31 | * mpsc.h - header file for MPSC in uart mode (console driver) |
| 32 | */ |
| 33 | |
| 34 | #ifndef __MPSC_H__ |
| 35 | #define __MPSC_H__ |
| 36 | |
| 37 | /* include actual Galileo defines */ |
| 38 | #include "../include/mv_gen_reg.h" |
| 39 | |
| 40 | /* driver related defines */ |
| 41 | |
| 42 | int mpsc_init(int baud); |
| 43 | void mpsc_sdma_init(void); |
| 44 | void mpsc_init2(void); |
| 45 | int galbrg_set_baudrate(int channel, int rate); |
| 46 | |
| 47 | int mpsc_putchar_early(char ch); |
| 48 | char mpsc_getchar_debug(void); |
| 49 | int mpsc_test_char_debug(void); |
| 50 | |
| 51 | int mpsc_test_char_sdma(void); |
| 52 | |
| 53 | extern int (*mpsc_putchar)(char ch); |
| 54 | extern char (*mpsc_getchar)(void); |
| 55 | extern int (*mpsc_test_char)(void); |
| 56 | |
| 57 | #define CHANNEL CONFIG_MPSC_PORT |
| 58 | |
| 59 | #define TX_DESC 5 |
| 60 | #define RX_DESC 20 |
| 61 | |
| 62 | #define DESC_FIRST 0x00010000 |
| 63 | #define DESC_LAST 0x00020000 |
| 64 | #define DESC_OWNER_BIT 0x80000000 |
| 65 | |
| 66 | #define TX_DEMAND 0x00800000 |
| 67 | #define TX_STOP 0x00010000 |
| 68 | #define RX_ENABLE 0x00000080 |
| 69 | |
Wolfgang Denk | a1be476 | 2008-05-20 16:00:29 +0200 | [diff] [blame] | 70 | #define SDMA_RX_ABORT (1 << 15) |
| 71 | #define SDMA_TX_ABORT (1 << 31) |
| 72 | #define MPSC_TX_ABORT (1 << 7) |
wdenk | 5da7f2f | 2004-01-03 00:43:19 +0000 | [diff] [blame] | 73 | #define MPSC_RX_ABORT (1 << 23) |
| 74 | #define MPSC_ENTER_HUNT (1 << 31) |
| 75 | |
| 76 | /* MPSC defines */ |
| 77 | |
| 78 | #define GALMPSC_CONNECT 0x1 |
| 79 | #define GALMPSC_DISCONNECT 0x0 |
| 80 | |
| 81 | #define GALMPSC_UART 0x1 |
| 82 | |
| 83 | #define GALMPSC_STOP_BITS_1 0x0 |
| 84 | #define GALMPSC_STOP_BITS_2 0x1 |
| 85 | #define GALMPSC_CHAR_LENGTH_8 0x3 |
| 86 | #define GALMPSC_CHAR_LENGTH_7 0x2 |
| 87 | |
| 88 | #define GALMPSC_PARITY_ODD 0x0 |
| 89 | #define GALMPSC_PARITY_EVEN 0x2 |
| 90 | #define GALMPSC_PARITY_MARK 0x3 |
| 91 | #define GALMPSC_PARITY_SPACE 0x1 |
| 92 | #define GALMPSC_PARITY_NONE -1 |
| 93 | |
| 94 | #define GALMPSC_SERIAL_MULTIPLEX SERIAL_PORT_MULTIPLEX /* 0xf010 */ |
| 95 | #define GALMPSC_ROUTING_REGISTER MAIN_ROUTING_REGISTER /* 0xb400 */ |
| 96 | #define GALMPSC_RxC_ROUTE RECEIVE_CLOCK_ROUTING_REGISTER /* 0xb404 */ |
| 97 | #define GALMPSC_TxC_ROUTE TRANSMIT_CLOCK_ROUTING_REGISTER /* 0xb408 */ |
| 98 | #define GALMPSC_MCONF_LOW MPSC0_MAIN_CONFIGURATION_LOW /* 0x8000 */ |
| 99 | #define GALMPSC_MCONF_HIGH MPSC0_MAIN_CONFIGURATION_HIGH /* 0x8004 */ |
| 100 | #define GALMPSC_PROTOCONF_REG MPSC0_PROTOCOL_CONFIGURATION /* 0x8008 */ |
| 101 | |
| 102 | #define GALMPSC_REG_GAP 0x1000 |
| 103 | |
| 104 | #define GALMPSC_MCONF_CHREG_BASE CHANNEL0_REGISTER1 /* 0x800c */ |
| 105 | #define GALMPSC_CHANNELREG_1 CHANNEL0_REGISTER1 /* 0x800c */ |
| 106 | #define GALMPSC_CHANNELREG_2 CHANNEL0_REGISTER2 /* 0x8010 */ |
| 107 | #define GALMPSC_CHANNELREG_3 CHANNEL0_REGISTER3 /* 0x8014 */ |
| 108 | #define GALMPSC_CHANNELREG_4 CHANNEL0_REGISTER4 /* 0x8018 */ |
| 109 | #define GALMPSC_CHANNELREG_5 CHANNEL0_REGISTER5 /* 0x801c */ |
| 110 | #define GALMPSC_CHANNELREG_6 CHANNEL0_REGISTER6 /* 0x8020 */ |
| 111 | #define GALMPSC_CHANNELREG_7 CHANNEL0_REGISTER7 /* 0x8024 */ |
| 112 | #define GALMPSC_CHANNELREG_8 CHANNEL0_REGISTER8 /* 0x8028 */ |
| 113 | #define GALMPSC_CHANNELREG_9 CHANNEL0_REGISTER9 /* 0x802c */ |
| 114 | #define GALMPSC_CHANNELREG_10 CHANNEL0_REGISTER10 /* 0x8030 */ |
| 115 | #define GALMPSC_CHANNELREG_11 CHANNEL0_REGISTER11 /* 0x8034 */ |
| 116 | |
| 117 | #define GALSDMA_COMMAND_FIRST (1 << 16) |
| 118 | #define GALSDMA_COMMAND_LAST (1 << 17) |
| 119 | #define GALSDMA_COMMAND_ENABLEINT (1 << 23) |
| 120 | #define GALSDMA_COMMAND_AUTO (1 << 30) |
| 121 | #define GALSDMA_COMMAND_OWNER (1 << 31) |
| 122 | |
| 123 | #define GALSDMA_RX 0 |
| 124 | #define GALSDMA_TX 1 |
| 125 | |
| 126 | /* CHANNEL2 should be CHANNEL1, according to documentation, |
| 127 | * but to work with the current GTREGS file... |
| 128 | */ |
| 129 | #define GALSDMA_0_CONF_REG CHANNEL0_CONFIGURATION_REGISTER /* 0x4000 */ |
| 130 | #define GALSDMA_1_CONF_REG CHANNEL2_CONFIGURATION_REGISTER /* 0x6000 */ |
| 131 | #define GALSDMA_0_COM_REG CHANNEL0_COMMAND_REGISTER /* 0x4008 */ |
| 132 | #define GALSDMA_1_COM_REG CHANNEL2_COMMAND_REGISTER /* 0x6008 */ |
| 133 | #define GALSDMA_0_CUR_RX_PTR CHANNEL0_CURRENT_RX_DESCRIPTOR_POINTER /* 0x4810 */ |
| 134 | #define GALSDMA_0_CUR_TX_PTR CHANNEL0_CURRENT_TX_DESCRIPTOR_POINTER /* 0x4c10 */ |
| 135 | #define GALSDMA_0_FIR_TX_PTR CHANNEL0_FIRST_TX_DESCRIPTOR_POINTER /* 0x4c14 */ |
| 136 | #define GALSDMA_1_CUR_RX_PTR CHANNEL2_CURRENT_RX_DESCRIPTOR_POINTER /* 0x6810 */ |
| 137 | #define GALSDMA_1_CUR_TX_PTR CHANNEL2_CURRENT_TX_DESCRIPTOR_POINTER /* 0x6c10 */ |
| 138 | #define GALSDMA_1_FIR_TX_PTR CHANNEL2_FIRST_TX_DESCRIPTOR_POINTER /* 0x6c14 */ |
| 139 | #define GALSDMA_REG_DIFF 0x2000 |
| 140 | |
| 141 | /* WRONG in gt64260R.h */ |
| 142 | #define GALSDMA_INT_CAUSE 0xb800 /* SDMA_CAUSE */ |
| 143 | #define GALSDMA_INT_MASK 0xb880 /* SDMA_MASK */ |
| 144 | #define GALMPSC_0_INT_CAUSE 0xb804 |
| 145 | #define GALMPSC_0_INT_MASK 0xb884 |
| 146 | |
| 147 | #define GALSDMA_MODE_UART 0 |
| 148 | #define GALSDMA_MODE_BISYNC 1 |
| 149 | #define GALSDMA_MODE_HDLC 2 |
| 150 | #define GALSDMA_MODE_TRANSPARENT 3 |
| 151 | |
| 152 | #define GALBRG_0_CONFREG BRG0_CONFIGURATION_REGISTER /* 0xb200 */ |
| 153 | #define GALBRG_REG_GAP 0x0008 |
| 154 | #define GALBRG_0_BTREG BRG0_BAUDE_TUNING_REGISTER /* 0xb204 */ |
| 155 | |
| 156 | #endif /* __MPSC_H__ */ |