blob: 396d8a5472f90ce0981515e26c4ebb9c0d2541e8 [file] [log] [blame]
Charles Manning685e87f2014-03-06 15:40:50 +13001/*
2 * Copyright (C) 2014 Charles Manning <cdhmanning@gmail.com>
3 *
4 * SPDX-License-Identifier: GPL-2.0+
5 *
6 * Reference doc http://www.altera.com.cn/literature/hb/cyclone-v/cv_5400A.pdf
7 * Note this doc is not entirely accurate. Of particular interest to us is the
8 * "header" length field being in U32s and not bytes.
9 *
10 * "Header" is a structure of the following format.
11 * this is positioned at 0x40.
12 *
13 * Endian is LSB.
14 *
15 * Offset Length Usage
16 * -----------------------
17 * 0x40 4 Validation word 0x31305341
18 * 0x44 1 Version (whatever, zero is fine)
19 * 0x45 1 Flags (unused, zero is fine)
20 * 0x46 2 Length (in units of u32, including the end checksum).
21 * 0x48 2 Zero
22 * 0x4A 2 Checksum over the header. NB Not CRC32
23 *
24 * At the end of the code we have a 32-bit CRC checksum over whole binary
25 * excluding the CRC.
26 *
27 * Note that the CRC used here is **not** the zlib/Adler crc32. It is the
28 * CRC-32 used in bzip2, ethernet and elsewhere.
29 *
30 * The image is padded out to 64k, because that is what is
31 * typically used to write the image to the boot medium.
32 */
33
34#include "pbl_crc32.h"
35#include "imagetool.h"
36#include <image.h>
37
38#define HEADER_OFFSET 0x40
39#define VALIDATION_WORD 0x31305341
40#define PADDED_SIZE 0x10000
41
42/* To allow for adding CRC, the max input size is a bit smaller. */
43#define MAX_INPUT_SIZE (PADDED_SIZE - sizeof(uint32_t))
44
45static uint8_t buffer[PADDED_SIZE];
46
47static struct socfpga_header {
48 uint32_t validation;
49 uint8_t version;
50 uint8_t flags;
51 uint16_t length_u32;
52 uint16_t zero;
53 uint16_t checksum;
54} header;
55
56/*
57 * The header checksum is just a very simple checksum over
58 * the header area.
59 * There is still a crc32 over the whole lot.
60 */
61static uint16_t hdr_checksum(struct socfpga_header *header)
62{
63 int len = sizeof(*header) - sizeof(header->checksum);
64 uint8_t *buf = (uint8_t *)header;
65 uint16_t ret = 0;
66
67 while (--len)
68 ret += *buf++;
69
70 return ret;
71}
72
73
74static void build_header(uint8_t *buf, uint8_t version, uint8_t flags,
75 uint16_t length_bytes)
76{
77 header.validation = htole32(VALIDATION_WORD);
78 header.version = version;
79 header.flags = flags;
80 header.length_u32 = htole16(length_bytes/4);
81 header.zero = 0;
82 header.checksum = htole16(hdr_checksum(&header));
83
84 memcpy(buf, &header, sizeof(header));
85}
86
87/*
88 * Perform a rudimentary verification of header and return
89 * size of image.
90 */
91static int verify_header(const uint8_t *buf)
92{
93 memcpy(&header, buf, sizeof(header));
94
95 if (le32toh(header.validation) != VALIDATION_WORD)
96 return -1;
97 if (le16toh(header.checksum) != hdr_checksum(&header))
98 return -1;
99
100 return le16toh(header.length_u32) * 4;
101}
102
103/* Sign the buffer and return the signed buffer size */
104static int sign_buffer(uint8_t *buf,
105 uint8_t version, uint8_t flags,
106 int len, int pad_64k)
107{
108 uint32_t calc_crc;
109
110 /* Align the length up */
111 len = (len + 3) & (~3);
112
113 /* Build header, adding 4 bytes to length to hold the CRC32. */
114 build_header(buf + HEADER_OFFSET, version, flags, len + 4);
115
116 /* Calculate and apply the CRC */
117 calc_crc = ~pbl_crc32(0, (char *)buf, len);
118
119 *((uint32_t *)(buf + len)) = htole32(calc_crc);
120
121 if (!pad_64k)
122 return len + 4;
123
124 return PADDED_SIZE;
125}
126
127/* Verify that the buffer looks sane */
128static int verify_buffer(const uint8_t *buf)
129{
130 int len; /* Including 32bit CRC */
131 uint32_t calc_crc;
132 uint32_t buf_crc;
133
134 len = verify_header(buf + HEADER_OFFSET);
135 if (len < 0) {
136 fprintf(stderr, "Invalid header\n");
137 return -1;
138 }
139
140 if (len < HEADER_OFFSET || len > PADDED_SIZE) {
141 fprintf(stderr, "Invalid header length (%i)\n", len);
142 return -1;
143 }
144
145 /*
146 * Adjust length to the base of the CRC.
147 * Check the CRC.
148 */
149 len -= 4;
150
151 calc_crc = ~pbl_crc32(0, (const char *)buf, len);
152
153 buf_crc = le32toh(*((uint32_t *)(buf + len)));
154
155 if (buf_crc != calc_crc) {
156 fprintf(stderr, "CRC32 does not match (%08x != %08x)\n",
157 buf_crc, calc_crc);
158 return -1;
159 }
160
161 return 0;
162}
163
164/* mkimage glue functions */
165static int socfpgaimage_verify_header(unsigned char *ptr, int image_size,
166 struct image_tool_params *params)
167{
168 if (image_size != PADDED_SIZE)
169 return -1;
170
171 return verify_buffer(ptr);
172}
173
174static void socfpgaimage_print_header(const void *ptr)
175{
176 if (verify_buffer(ptr) == 0)
177 printf("Looks like a sane SOCFPGA preloader\n");
178 else
179 printf("Not a sane SOCFPGA preloader\n");
180}
181
182static int socfpgaimage_check_params(struct image_tool_params *params)
183{
184 /* Not sure if we should be accepting fflags */
185 return (params->dflag && (params->fflag || params->lflag)) ||
186 (params->fflag && (params->dflag || params->lflag)) ||
187 (params->lflag && (params->dflag || params->fflag));
188}
189
190static int socfpgaimage_check_image_types(uint8_t type)
191{
192 if (type == IH_TYPE_SOCFPGAIMAGE)
193 return EXIT_SUCCESS;
194 return EXIT_FAILURE;
195}
196
197/*
198 * To work in with the mkimage framework, we do some ugly stuff...
199 *
200 * First, socfpgaimage_vrec_header() is called.
201 * We prepend a fake header big enough to make the file PADDED_SIZE.
202 * This gives us enough space to do what we want later.
203 *
204 * Next, socfpgaimage_set_header() is called.
205 * We fix up the buffer by moving the image to the start of the buffer.
206 * We now have some room to do what we need (add CRC and padding).
207 */
208
209static int data_size;
210#define FAKE_HEADER_SIZE (PADDED_SIZE - data_size)
211
212static int socfpgaimage_vrec_header(struct image_tool_params *params,
213 struct image_type_params *tparams)
214{
215 struct stat sbuf;
216
217 if (params->datafile &&
218 stat(params->datafile, &sbuf) == 0 &&
219 sbuf.st_size <= MAX_INPUT_SIZE) {
220 data_size = sbuf.st_size;
221 tparams->header_size = FAKE_HEADER_SIZE;
222 }
223 return 0;
224}
225
226static void socfpgaimage_set_header(void *ptr, struct stat *sbuf, int ifd,
227 struct image_tool_params *params)
228{
229 uint8_t *buf = (uint8_t *)ptr;
230
231 /*
232 * This function is called after vrec_header() has been called.
233 * At this stage we have the FAKE_HEADER_SIZE dummy bytes followed by
234 * data_size image bytes. Total = PADDED_SIZE.
235 * We need to fix the buffer by moving the image bytes back to
236 * the beginning of the buffer, then actually do the signing stuff...
237 */
238 memmove(buf, buf + FAKE_HEADER_SIZE, data_size);
239 memset(buf + data_size, 0, FAKE_HEADER_SIZE);
240
241 sign_buffer(buf, 0, 0, data_size, 0);
242}
243
244static struct image_type_params socfpgaimage_params = {
245 .name = "Altera SOCFPGA preloader support",
246 .vrec_header = socfpgaimage_vrec_header,
247 .header_size = 0, /* This will be modified by vrec_header() */
248 .hdr = (void *)buffer,
249 .check_image_type = socfpgaimage_check_image_types,
250 .verify_header = socfpgaimage_verify_header,
251 .print_header = socfpgaimage_print_header,
252 .set_header = socfpgaimage_set_header,
253 .check_params = socfpgaimage_check_params,
254};
255
256void init_socfpga_image_type(void)
257{
258 register_image_type(&socfpgaimage_params);
259}