| Frieder Schrempf | c6d170b | 2021-09-29 16:42:41 +0200 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0 |
| 2 | /* |
| 3 | * Copyright (C) 2017 exceet electronics GmbH |
| 4 | * Copyright (C) 2018 Kontron Electronics GmbH |
| 5 | * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org> |
| 6 | */ |
| 7 | |
| 8 | #include <dt-bindings/gpio/gpio.h> |
| 9 | |
| 10 | / { |
| 11 | chosen { |
| 12 | stdout-path = &uart4; |
| 13 | }; |
| 14 | |
| 15 | memory@80000000 { |
| 16 | reg = <0x80000000 0x10000000>; |
| 17 | device_type = "memory"; |
| 18 | }; |
| 19 | }; |
| 20 | |
| 21 | &ecspi2 { |
| 22 | cs-gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>; |
| 23 | pinctrl-names = "default"; |
| 24 | pinctrl-0 = <&pinctrl_ecspi2>; |
| 25 | status = "okay"; |
| 26 | |
| 27 | spi-flash@0 { |
| 28 | compatible = "mxicy,mx25v8035f", "jedec,spi-nor"; |
| 29 | spi-max-frequency = <50000000>; |
| 30 | reg = <0>; |
| 31 | }; |
| 32 | }; |
| 33 | |
| 34 | &fec1 { |
| 35 | pinctrl-names = "default"; |
| 36 | pinctrl-0 = <&pinctrl_enet1 &pinctrl_enet1_mdio>; |
| 37 | phy-mode = "rmii"; |
| 38 | phy-handle = <ðphy1>; |
| 39 | status = "okay"; |
| 40 | |
| 41 | mdio { |
| 42 | #address-cells = <1>; |
| 43 | #size-cells = <0>; |
| 44 | |
| 45 | ethphy1: ethernet-phy@1 { |
| 46 | reg = <1>; |
| 47 | micrel,led-mode = <0>; |
| 48 | clocks = <&clks IMX6UL_CLK_ENET_REF>; |
| 49 | clock-names = "rmii-ref"; |
| 50 | }; |
| 51 | }; |
| 52 | }; |
| 53 | |
| 54 | &fec2 { |
| 55 | phy-mode = "rmii"; |
| 56 | status = "disabled"; |
| 57 | }; |
| 58 | |
| 59 | &qspi { |
| 60 | pinctrl-names = "default"; |
| 61 | pinctrl-0 = <&pinctrl_qspi>; |
| 62 | status = "okay"; |
| 63 | |
| 64 | spi-flash@0 { |
| 65 | #address-cells = <1>; |
| 66 | #size-cells = <1>; |
| 67 | compatible = "spi-nand"; |
| 68 | spi-max-frequency = <104000000>; |
| 69 | spi-tx-bus-width = <4>; |
| 70 | spi-rx-bus-width = <4>; |
| 71 | reg = <0>; |
| 72 | }; |
| 73 | }; |
| 74 | |
| 75 | &iomuxc { |
| 76 | pinctrl-names = "default"; |
| 77 | pinctrl-0 = <&pinctrl_reset_out>; |
| 78 | |
| 79 | pinctrl_ecspi2: ecspi2grp { |
| 80 | fsl,pins = < |
| 81 | MX6UL_PAD_CSI_DATA03__ECSPI2_MISO 0x100b1 |
| 82 | MX6UL_PAD_CSI_DATA02__ECSPI2_MOSI 0x100b1 |
| 83 | MX6UL_PAD_CSI_DATA00__ECSPI2_SCLK 0x100b1 |
| 84 | MX6UL_PAD_CSI_DATA01__GPIO4_IO22 0x100b1 |
| 85 | >; |
| 86 | }; |
| 87 | |
| 88 | pinctrl_enet1: enet1grp { |
| 89 | fsl,pins = < |
| 90 | MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0 |
| 91 | MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0 |
| 92 | MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0 |
| 93 | MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0 |
| 94 | MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 |
| 95 | MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 |
| 96 | MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 |
| 97 | MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b009 |
| 98 | >; |
| 99 | }; |
| 100 | |
| 101 | pinctrl_enet1_mdio: enet1mdiogrp { |
| 102 | fsl,pins = < |
| 103 | MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0 |
| 104 | MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0 |
| 105 | >; |
| 106 | }; |
| 107 | |
| 108 | pinctrl_qspi: qspigrp { |
| 109 | fsl,pins = < |
| 110 | MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK 0x70a1 |
| 111 | MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00 0x70a1 |
| 112 | MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01 0x70a1 |
| 113 | MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02 0x70a1 |
| 114 | MX6UL_PAD_NAND_CLE__QSPI_A_DATA03 0x70a1 |
| 115 | MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B 0x70a1 |
| 116 | >; |
| 117 | }; |
| 118 | |
| 119 | pinctrl_reset_out: rstoutgrp { |
| 120 | fsl,pins = < |
| 121 | MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x1b0b0 |
| 122 | >; |
| 123 | }; |
| 124 | }; |