Dirk Behme | 78cd9ac | 2010-12-11 11:01:00 -0500 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (C) 2010 Dirk Behme <dirk.behme@googlemail.com> |
| 3 | * |
| 4 | * Driver for McSPI controller on OMAP3. Based on davinci_spi.c |
| 5 | * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/ |
| 6 | * |
| 7 | * Copyright (C) 2007 Atmel Corporation |
| 8 | * |
| 9 | * Parts taken from linux/drivers/spi/omap2_mcspi.c |
| 10 | * Copyright (C) 2005, 2006 Nokia Corporation |
| 11 | * |
| 12 | * Modified by Ruslan Araslanov <ruslan.araslanov@vitecmm.com> |
| 13 | * |
| 14 | * See file CREDITS for list of people who contributed to this |
| 15 | * project. |
| 16 | * |
| 17 | * This program is free software; you can redistribute it and/or |
| 18 | * modify it under the terms of the GNU General Public License as |
| 19 | * published by the Free Software Foundation; either version 2 of |
| 20 | * the License, or (at your option) any later version. |
| 21 | * |
| 22 | * This program is distributed in the hope that it will be useful, |
| 23 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 24 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 25 | * GNU General Public License for more details. |
| 26 | * |
| 27 | * You should have received a copy of the GNU General Public License |
| 28 | * along with this program; if not, write to the Free Software |
| 29 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| 30 | * MA 02111-1307 USA |
| 31 | * |
| 32 | */ |
| 33 | |
| 34 | #include <common.h> |
| 35 | #include <spi.h> |
| 36 | #include <malloc.h> |
| 37 | #include <asm/io.h> |
| 38 | #include "omap3_spi.h" |
| 39 | |
| 40 | #define WORD_LEN 8 |
| 41 | #define SPI_WAIT_TIMEOUT 3000000; |
| 42 | |
| 43 | static void spi_reset(struct omap3_spi_slave *ds) |
| 44 | { |
| 45 | unsigned int tmp; |
| 46 | |
| 47 | writel(OMAP3_MCSPI_SYSCONFIG_SOFTRESET, &ds->regs->sysconfig); |
| 48 | do { |
| 49 | tmp = readl(&ds->regs->sysstatus); |
| 50 | } while (!(tmp & OMAP3_MCSPI_SYSSTATUS_RESETDONE)); |
| 51 | |
| 52 | writel(OMAP3_MCSPI_SYSCONFIG_AUTOIDLE | |
| 53 | OMAP3_MCSPI_SYSCONFIG_ENAWAKEUP | |
| 54 | OMAP3_MCSPI_SYSCONFIG_SMARTIDLE, |
| 55 | &ds->regs->sysconfig); |
| 56 | |
| 57 | writel(OMAP3_MCSPI_WAKEUPENABLE_WKEN, &ds->regs->wakeupenable); |
| 58 | } |
| 59 | |
| 60 | void spi_init() |
| 61 | { |
| 62 | /* do nothing */ |
| 63 | } |
| 64 | |
| 65 | struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, |
| 66 | unsigned int max_hz, unsigned int mode) |
| 67 | { |
| 68 | struct omap3_spi_slave *ds; |
| 69 | |
| 70 | ds = malloc(sizeof(struct omap3_spi_slave)); |
| 71 | if (!ds) { |
| 72 | printf("SPI error: malloc of SPI structure failed\n"); |
| 73 | return NULL; |
| 74 | } |
| 75 | |
| 76 | /* |
| 77 | * OMAP3 McSPI (MultiChannel SPI) has 4 busses (modules) |
| 78 | * with different number of chip selects (CS, channels): |
| 79 | * McSPI1 has 4 CS (bus 0, cs 0 - 3) |
| 80 | * McSPI2 has 2 CS (bus 1, cs 0 - 1) |
| 81 | * McSPI3 has 2 CS (bus 2, cs 0 - 1) |
| 82 | * McSPI4 has 1 CS (bus 3, cs 0) |
| 83 | */ |
| 84 | |
| 85 | switch (bus) { |
| 86 | case 0: |
| 87 | ds->regs = (struct mcspi *)OMAP3_MCSPI1_BASE; |
| 88 | break; |
Tom Rini | 470e2a2 | 2012-08-08 14:29:51 -0700 | [diff] [blame] | 89 | #ifdef OMAP3_MCSPI2_BASE |
Dirk Behme | 78cd9ac | 2010-12-11 11:01:00 -0500 | [diff] [blame] | 90 | case 1: |
| 91 | ds->regs = (struct mcspi *)OMAP3_MCSPI2_BASE; |
| 92 | break; |
Tom Rini | 470e2a2 | 2012-08-08 14:29:51 -0700 | [diff] [blame] | 93 | #endif |
| 94 | #ifdef OMAP3_MCSPI3_BASE |
Dirk Behme | 78cd9ac | 2010-12-11 11:01:00 -0500 | [diff] [blame] | 95 | case 2: |
| 96 | ds->regs = (struct mcspi *)OMAP3_MCSPI3_BASE; |
| 97 | break; |
Tom Rini | 470e2a2 | 2012-08-08 14:29:51 -0700 | [diff] [blame] | 98 | #endif |
| 99 | #ifdef OMAP3_MCSPI4_BASE |
Dirk Behme | 78cd9ac | 2010-12-11 11:01:00 -0500 | [diff] [blame] | 100 | case 3: |
| 101 | ds->regs = (struct mcspi *)OMAP3_MCSPI4_BASE; |
| 102 | break; |
Tom Rini | 470e2a2 | 2012-08-08 14:29:51 -0700 | [diff] [blame] | 103 | #endif |
Dirk Behme | 78cd9ac | 2010-12-11 11:01:00 -0500 | [diff] [blame] | 104 | default: |
| 105 | printf("SPI error: unsupported bus %i. \ |
| 106 | Supported busses 0 - 3\n", bus); |
| 107 | return NULL; |
| 108 | } |
| 109 | ds->slave.bus = bus; |
| 110 | |
| 111 | if (((bus == 0) && (cs > 3)) || |
| 112 | ((bus == 1) && (cs > 1)) || |
| 113 | ((bus == 2) && (cs > 1)) || |
| 114 | ((bus == 3) && (cs > 0))) { |
| 115 | printf("SPI error: unsupported chip select %i \ |
| 116 | on bus %i\n", cs, bus); |
| 117 | return NULL; |
| 118 | } |
| 119 | ds->slave.cs = cs; |
| 120 | |
| 121 | if (max_hz > OMAP3_MCSPI_MAX_FREQ) { |
| 122 | printf("SPI error: unsupported frequency %i Hz. \ |
| 123 | Max frequency is 48 Mhz\n", max_hz); |
| 124 | return NULL; |
| 125 | } |
| 126 | ds->freq = max_hz; |
| 127 | |
| 128 | if (mode > SPI_MODE_3) { |
| 129 | printf("SPI error: unsupported SPI mode %i\n", mode); |
| 130 | return NULL; |
| 131 | } |
| 132 | ds->mode = mode; |
| 133 | |
| 134 | return &ds->slave; |
| 135 | } |
| 136 | |
| 137 | void spi_free_slave(struct spi_slave *slave) |
| 138 | { |
| 139 | struct omap3_spi_slave *ds = to_omap3_spi(slave); |
| 140 | |
| 141 | free(ds); |
| 142 | } |
| 143 | |
| 144 | int spi_claim_bus(struct spi_slave *slave) |
| 145 | { |
| 146 | struct omap3_spi_slave *ds = to_omap3_spi(slave); |
| 147 | unsigned int conf, div = 0; |
| 148 | |
| 149 | /* McSPI global module configuration */ |
| 150 | |
| 151 | /* |
| 152 | * setup when switching from (reset default) slave mode |
| 153 | * to single-channel master mode |
| 154 | */ |
| 155 | spi_reset(ds); |
| 156 | conf = readl(&ds->regs->modulctrl); |
| 157 | conf &= ~(OMAP3_MCSPI_MODULCTRL_STEST | OMAP3_MCSPI_MODULCTRL_MS); |
| 158 | conf |= OMAP3_MCSPI_MODULCTRL_SINGLE; |
| 159 | writel(conf, &ds->regs->modulctrl); |
| 160 | |
| 161 | /* McSPI individual channel configuration */ |
| 162 | |
| 163 | /* Calculate clock divisor. Valid range: 0x0 - 0xC ( /1 - /4096 ) */ |
| 164 | if (ds->freq) { |
| 165 | while (div <= 0xC && (OMAP3_MCSPI_MAX_FREQ / (1 << div)) |
| 166 | > ds->freq) |
| 167 | div++; |
| 168 | } else |
| 169 | div = 0xC; |
| 170 | |
| 171 | conf = readl(&ds->regs->channel[ds->slave.cs].chconf); |
| 172 | |
| 173 | /* standard 4-wire master mode: SCK, MOSI/out, MISO/in, nCS |
| 174 | * REVISIT: this controller could support SPI_3WIRE mode. |
| 175 | */ |
Peter Korsgaard | 2a6e8d0 | 2012-10-17 09:20:46 +0000 | [diff] [blame] | 176 | #ifdef CONFIG_OMAP3_SPI_D0_D1_SWAPPED |
Tom Rini | 883401e | 2012-08-08 14:35:55 -0700 | [diff] [blame] | 177 | /* |
Peter Korsgaard | 2a6e8d0 | 2012-10-17 09:20:46 +0000 | [diff] [blame] | 178 | * Some boards have D0 wired as MOSI / D1 as MISO instead of |
| 179 | * The normal D0 as MISO / D1 as MOSI. |
Tom Rini | 883401e | 2012-08-08 14:35:55 -0700 | [diff] [blame] | 180 | */ |
Peter Korsgaard | 2a6e8d0 | 2012-10-17 09:20:46 +0000 | [diff] [blame] | 181 | conf &= ~OMAP3_MCSPI_CHCONF_DPE0; |
| 182 | conf |= OMAP3_MCSPI_CHCONF_IS|OMAP3_MCSPI_CHCONF_DPE1; |
Tom Rini | 883401e | 2012-08-08 14:35:55 -0700 | [diff] [blame] | 183 | #else |
Dirk Behme | 78cd9ac | 2010-12-11 11:01:00 -0500 | [diff] [blame] | 184 | conf &= ~(OMAP3_MCSPI_CHCONF_IS|OMAP3_MCSPI_CHCONF_DPE1); |
| 185 | conf |= OMAP3_MCSPI_CHCONF_DPE0; |
Tom Rini | 883401e | 2012-08-08 14:35:55 -0700 | [diff] [blame] | 186 | #endif |
Dirk Behme | 78cd9ac | 2010-12-11 11:01:00 -0500 | [diff] [blame] | 187 | |
| 188 | /* wordlength */ |
| 189 | conf &= ~OMAP3_MCSPI_CHCONF_WL_MASK; |
| 190 | conf |= (WORD_LEN - 1) << 7; |
| 191 | |
| 192 | /* set chipselect polarity; manage with FORCE */ |
| 193 | if (!(ds->mode & SPI_CS_HIGH)) |
| 194 | conf |= OMAP3_MCSPI_CHCONF_EPOL; /* active-low; normal */ |
| 195 | else |
| 196 | conf &= ~OMAP3_MCSPI_CHCONF_EPOL; |
| 197 | |
| 198 | /* set clock divisor */ |
| 199 | conf &= ~OMAP3_MCSPI_CHCONF_CLKD_MASK; |
| 200 | conf |= div << 2; |
| 201 | |
| 202 | /* set SPI mode 0..3 */ |
| 203 | if (ds->mode & SPI_CPOL) |
| 204 | conf |= OMAP3_MCSPI_CHCONF_POL; |
| 205 | else |
| 206 | conf &= ~OMAP3_MCSPI_CHCONF_POL; |
| 207 | if (ds->mode & SPI_CPHA) |
| 208 | conf |= OMAP3_MCSPI_CHCONF_PHA; |
| 209 | else |
| 210 | conf &= ~OMAP3_MCSPI_CHCONF_PHA; |
| 211 | |
| 212 | /* Transmit & receive mode */ |
| 213 | conf &= ~OMAP3_MCSPI_CHCONF_TRM_MASK; |
| 214 | |
| 215 | writel(conf, &ds->regs->channel[ds->slave.cs].chconf); |
| 216 | |
| 217 | return 0; |
| 218 | } |
| 219 | |
| 220 | void spi_release_bus(struct spi_slave *slave) |
| 221 | { |
| 222 | struct omap3_spi_slave *ds = to_omap3_spi(slave); |
| 223 | |
| 224 | /* Reset the SPI hardware */ |
| 225 | spi_reset(ds); |
| 226 | } |
| 227 | |
| 228 | int omap3_spi_write(struct spi_slave *slave, unsigned int len, const u8 *txp, |
| 229 | unsigned long flags) |
| 230 | { |
| 231 | struct omap3_spi_slave *ds = to_omap3_spi(slave); |
| 232 | int i; |
| 233 | int timeout = SPI_WAIT_TIMEOUT; |
| 234 | int chconf = readl(&ds->regs->channel[ds->slave.cs].chconf); |
| 235 | |
| 236 | if (flags & SPI_XFER_BEGIN) |
| 237 | writel(OMAP3_MCSPI_CHCTRL_EN, |
| 238 | &ds->regs->channel[ds->slave.cs].chctrl); |
| 239 | |
| 240 | chconf &= ~OMAP3_MCSPI_CHCONF_TRM_MASK; |
| 241 | chconf |= OMAP3_MCSPI_CHCONF_TRM_TX_ONLY; |
| 242 | chconf |= OMAP3_MCSPI_CHCONF_FORCE; |
| 243 | writel(chconf, &ds->regs->channel[ds->slave.cs].chconf); |
| 244 | |
| 245 | for (i = 0; i < len; i++) { |
| 246 | /* wait till TX register is empty (TXS == 1) */ |
| 247 | while (!(readl(&ds->regs->channel[ds->slave.cs].chstat) & |
| 248 | OMAP3_MCSPI_CHSTAT_TXS)) { |
| 249 | if (--timeout <= 0) { |
| 250 | printf("SPI TXS timed out, status=0x%08x\n", |
| 251 | readl(&ds->regs->channel[ds->slave.cs].chstat)); |
| 252 | return -1; |
| 253 | } |
| 254 | } |
| 255 | /* Write the data */ |
| 256 | writel(txp[i], &ds->regs->channel[ds->slave.cs].tx); |
| 257 | } |
| 258 | |
| 259 | if (flags & SPI_XFER_END) { |
| 260 | /* wait to finish of transfer */ |
| 261 | while (!(readl(&ds->regs->channel[ds->slave.cs].chstat) & |
| 262 | OMAP3_MCSPI_CHSTAT_EOT)); |
| 263 | |
| 264 | chconf &= ~OMAP3_MCSPI_CHCONF_FORCE; |
| 265 | writel(chconf, &ds->regs->channel[ds->slave.cs].chconf); |
| 266 | |
| 267 | writel(0, &ds->regs->channel[ds->slave.cs].chctrl); |
| 268 | } |
| 269 | return 0; |
| 270 | } |
| 271 | |
| 272 | int omap3_spi_read(struct spi_slave *slave, unsigned int len, u8 *rxp, |
| 273 | unsigned long flags) |
| 274 | { |
| 275 | struct omap3_spi_slave *ds = to_omap3_spi(slave); |
| 276 | int i; |
| 277 | int timeout = SPI_WAIT_TIMEOUT; |
| 278 | int chconf = readl(&ds->regs->channel[ds->slave.cs].chconf); |
| 279 | |
| 280 | if (flags & SPI_XFER_BEGIN) |
| 281 | writel(OMAP3_MCSPI_CHCTRL_EN, |
| 282 | &ds->regs->channel[ds->slave.cs].chctrl); |
| 283 | |
| 284 | chconf &= ~OMAP3_MCSPI_CHCONF_TRM_MASK; |
| 285 | chconf |= OMAP3_MCSPI_CHCONF_TRM_RX_ONLY; |
| 286 | chconf |= OMAP3_MCSPI_CHCONF_FORCE; |
| 287 | writel(chconf, &ds->regs->channel[ds->slave.cs].chconf); |
| 288 | |
| 289 | writel(0, &ds->regs->channel[ds->slave.cs].tx); |
| 290 | |
| 291 | for (i = 0; i < len; i++) { |
| 292 | /* Wait till RX register contains data (RXS == 1) */ |
| 293 | while (!(readl(&ds->regs->channel[ds->slave.cs].chstat) & |
| 294 | OMAP3_MCSPI_CHSTAT_RXS)) { |
| 295 | if (--timeout <= 0) { |
| 296 | printf("SPI RXS timed out, status=0x%08x\n", |
| 297 | readl(&ds->regs->channel[ds->slave.cs].chstat)); |
| 298 | return -1; |
| 299 | } |
| 300 | } |
| 301 | /* Read the data */ |
| 302 | rxp[i] = readl(&ds->regs->channel[ds->slave.cs].rx); |
| 303 | } |
| 304 | |
| 305 | if (flags & SPI_XFER_END) { |
| 306 | chconf &= ~OMAP3_MCSPI_CHCONF_FORCE; |
| 307 | writel(chconf, &ds->regs->channel[ds->slave.cs].chconf); |
| 308 | |
| 309 | writel(0, &ds->regs->channel[ds->slave.cs].chctrl); |
| 310 | } |
| 311 | |
| 312 | return 0; |
| 313 | } |
| 314 | |
jacopo mondi | fe8793e | 2011-03-02 05:13:22 +0000 | [diff] [blame] | 315 | /*McSPI Transmit Receive Mode*/ |
| 316 | int omap3_spi_txrx(struct spi_slave *slave, |
| 317 | unsigned int len, const u8 *txp, u8 *rxp, unsigned long flags) |
| 318 | { |
| 319 | struct omap3_spi_slave *ds = to_omap3_spi(slave); |
| 320 | int timeout = SPI_WAIT_TIMEOUT; |
| 321 | int chconf = readl(&ds->regs->channel[ds->slave.cs].chconf); |
| 322 | int irqstatus = readl(&ds->regs->irqstatus); |
| 323 | int i=0; |
| 324 | |
| 325 | /*Enable SPI channel*/ |
| 326 | if (flags & SPI_XFER_BEGIN) |
| 327 | writel(OMAP3_MCSPI_CHCTRL_EN, |
| 328 | &ds->regs->channel[ds->slave.cs].chctrl); |
| 329 | |
| 330 | /*set TRANSMIT-RECEIVE Mode*/ |
| 331 | chconf &= ~OMAP3_MCSPI_CHCONF_TRM_MASK; |
| 332 | chconf |= OMAP3_MCSPI_CHCONF_FORCE; |
| 333 | writel(chconf, &ds->regs->channel[ds->slave.cs].chconf); |
| 334 | |
| 335 | /*Shift in and out 1 byte at time*/ |
| 336 | for (i=0; i < len; i++){ |
| 337 | /* Write: wait for TX empty (TXS == 1)*/ |
| 338 | irqstatus |= (1<< (4*(ds->slave.bus))); |
| 339 | while (!(readl(&ds->regs->channel[ds->slave.cs].chstat) & |
| 340 | OMAP3_MCSPI_CHSTAT_TXS)) { |
| 341 | if (--timeout <= 0) { |
| 342 | printf("SPI TXS timed out, status=0x%08x\n", |
| 343 | readl(&ds->regs->channel[ds->slave.cs].chstat)); |
| 344 | return -1; |
| 345 | } |
| 346 | } |
| 347 | /* Write the data */ |
| 348 | writel(txp[i], &ds->regs->channel[ds->slave.cs].tx); |
| 349 | |
| 350 | /*Read: wait for RX containing data (RXS == 1)*/ |
| 351 | while (!(readl(&ds->regs->channel[ds->slave.cs].chstat) & |
| 352 | OMAP3_MCSPI_CHSTAT_RXS)) { |
| 353 | if (--timeout <= 0) { |
| 354 | printf("SPI RXS timed out, status=0x%08x\n", |
| 355 | readl(&ds->regs->channel[ds->slave.cs].chstat)); |
| 356 | return -1; |
| 357 | } |
| 358 | } |
| 359 | /* Read the data */ |
| 360 | rxp[i] = readl(&ds->regs->channel[ds->slave.cs].rx); |
| 361 | } |
| 362 | |
| 363 | /*if transfer must be terminated disable the channel*/ |
| 364 | if (flags & SPI_XFER_END) { |
| 365 | chconf &= ~OMAP3_MCSPI_CHCONF_FORCE; |
| 366 | writel(chconf, &ds->regs->channel[ds->slave.cs].chconf); |
| 367 | |
| 368 | writel(0, &ds->regs->channel[ds->slave.cs].chctrl); |
| 369 | } |
| 370 | |
| 371 | return 0; |
| 372 | } |
| 373 | |
Dirk Behme | 78cd9ac | 2010-12-11 11:01:00 -0500 | [diff] [blame] | 374 | int spi_xfer(struct spi_slave *slave, unsigned int bitlen, |
| 375 | const void *dout, void *din, unsigned long flags) |
| 376 | { |
| 377 | struct omap3_spi_slave *ds = to_omap3_spi(slave); |
| 378 | unsigned int len; |
| 379 | const u8 *txp = dout; |
| 380 | u8 *rxp = din; |
| 381 | int ret = -1; |
| 382 | |
| 383 | if (bitlen % 8) |
| 384 | return -1; |
| 385 | |
| 386 | len = bitlen / 8; |
| 387 | |
| 388 | if (bitlen == 0) { /* only change CS */ |
| 389 | int chconf = readl(&ds->regs->channel[ds->slave.cs].chconf); |
| 390 | |
| 391 | if (flags & SPI_XFER_BEGIN) { |
| 392 | writel(OMAP3_MCSPI_CHCTRL_EN, |
| 393 | &ds->regs->channel[ds->slave.cs].chctrl); |
| 394 | chconf |= OMAP3_MCSPI_CHCONF_FORCE; |
| 395 | writel(chconf, |
| 396 | &ds->regs->channel[ds->slave.cs].chconf); |
| 397 | } |
| 398 | if (flags & SPI_XFER_END) { |
| 399 | chconf &= ~OMAP3_MCSPI_CHCONF_FORCE; |
| 400 | writel(chconf, |
| 401 | &ds->regs->channel[ds->slave.cs].chconf); |
| 402 | writel(0, &ds->regs->channel[ds->slave.cs].chctrl); |
| 403 | } |
| 404 | ret = 0; |
| 405 | } else { |
jacopo mondi | fe8793e | 2011-03-02 05:13:22 +0000 | [diff] [blame] | 406 | if (dout != NULL && din != NULL) |
| 407 | ret = omap3_spi_txrx(slave, len, txp, rxp, flags); |
| 408 | else if (dout != NULL) |
Dirk Behme | 78cd9ac | 2010-12-11 11:01:00 -0500 | [diff] [blame] | 409 | ret = omap3_spi_write(slave, len, txp, flags); |
jacopo mondi | fe8793e | 2011-03-02 05:13:22 +0000 | [diff] [blame] | 410 | else if (din != NULL) |
Dirk Behme | 78cd9ac | 2010-12-11 11:01:00 -0500 | [diff] [blame] | 411 | ret = omap3_spi_read(slave, len, rxp, flags); |
| 412 | } |
| 413 | return ret; |
| 414 | } |
| 415 | |
| 416 | int spi_cs_is_valid(unsigned int bus, unsigned int cs) |
| 417 | { |
| 418 | return 1; |
| 419 | } |
| 420 | |
| 421 | void spi_cs_activate(struct spi_slave *slave) |
| 422 | { |
| 423 | } |
| 424 | |
| 425 | void spi_cs_deactivate(struct spi_slave *slave) |
| 426 | { |
| 427 | } |