blob: 1c2dee7ee23c756a66dd17de9ec9dcb55dada00f [file] [log] [blame]
Akshay Bhat9301aea2016-07-29 11:44:46 -04001/*
2 * Copyright (C) 2016 Timesys Corporation
3 * Copyright (C) 2016 Advantech Corporation
4 * Copyright (C) 2012 Freescale Semiconductor, Inc.
5 *
6 * SPDX-License-Identifier: GPL-2.0+
7 */
8
9#ifndef __ADVANTECH_DMSBA16_CONFIG_H
10#define __ADVANTECH_DMSBA16_CONFIG_H
11
12#include <asm/arch/imx-regs.h>
Stefano Babic33731bc2017-06-29 10:16:06 +020013#include <asm/mach-imx/gpio.h>
Akshay Bhat9301aea2016-07-29 11:44:46 -040014
15#define CONFIG_BOARD_NAME "Advantech DMS-BA16"
Akshay Bhat9301aea2016-07-29 11:44:46 -040016
17#define CONFIG_MXC_UART_BASE UART4_BASE
Simon Glass4694a742016-10-17 20:12:39 -060018#define CONSOLE_DEV "ttymxc3"
Akshay Bhat9301aea2016-07-29 11:44:46 -040019#define CONFIG_EXTRA_BOOTARGS "panic=10"
20
21#define CONFIG_BOOT_DIR ""
22#define CONFIG_LOADCMD "fatload"
23#define CONFIG_RFSPART "2"
24
25#define CONFIG_SUPPORT_EMMC_BOOT
26
27#include "mx6_common.h"
28#include <linux/sizes.h>
29
Akshay Bhat9301aea2016-07-29 11:44:46 -040030#define CONFIG_CMDLINE_TAG
31#define CONFIG_SETUP_MEMORY_TAGS
32#define CONFIG_INITRD_TAG
33#define CONFIG_REVISION_TAG
34#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)
35
Akshay Bhat9301aea2016-07-29 11:44:46 -040036#define CONFIG_MXC_GPIO
37#define CONFIG_MXC_UART
38
Akshay Bhat9301aea2016-07-29 11:44:46 -040039#define CONFIG_MXC_OCOTP
40
41/* SATA Configs */
Akshay Bhat9301aea2016-07-29 11:44:46 -040042#define CONFIG_SYS_SATA_MAX_DEVICE 1
43#define CONFIG_DWC_AHSATA_PORT_ID 0
44#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
45#define CONFIG_LBA48
Akshay Bhat9301aea2016-07-29 11:44:46 -040046
47/* MMC Configs */
48#define CONFIG_FSL_ESDHC
49#define CONFIG_FSL_USDHC
50#define CONFIG_SYS_FSL_ESDHC_ADDR 0
Akshay Bhat9301aea2016-07-29 11:44:46 -040051#define CONFIG_BOUNCE_BUFFER
Akshay Bhat9301aea2016-07-29 11:44:46 -040052
53/* USB Configs */
Akshay Bhat9301aea2016-07-29 11:44:46 -040054#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
55#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
56#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
57#define CONFIG_MXC_USB_FLAGS 0
Akshay Bhat9301aea2016-07-29 11:44:46 -040058
59#define CONFIG_USBD_HS
Akshay Bhat9301aea2016-07-29 11:44:46 -040060
61/* Networking Configs */
62#define CONFIG_FEC_MXC
63#define CONFIG_MII
64#define IMX_FEC_BASE ENET_BASE_ADDR
65#define CONFIG_FEC_XCV_TYPE RGMII
66#define CONFIG_ETHPRIME "FEC"
67#define CONFIG_FEC_MXC_PHYADDR 4
Akshay Bhat9301aea2016-07-29 11:44:46 -040068#define CONFIG_PHY_ATHEROS
69
70/* Serial Flash */
71#ifdef CONFIG_CMD_SF
72#define CONFIG_MXC_SPI
73#define CONFIG_SF_DEFAULT_BUS 0
74#define CONFIG_SF_DEFAULT_CS 0
75#define CONFIG_SF_DEFAULT_SPEED 20000000
76#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
77#endif
78
79/* allow to overwrite serial and ethaddr */
80#define CONFIG_ENV_OVERWRITE
81#define CONFIG_CONS_INDEX 1
Akshay Bhat9301aea2016-07-29 11:44:46 -040082
Akshay Bhat9301aea2016-07-29 11:44:46 -040083#define CONFIG_LOADADDR 0x12000000
84#define CONFIG_SYS_TEXT_BASE 0x17800000
85
86#define CONFIG_EXTRA_ENV_SETTINGS \
87 "script=boot.scr\0" \
88 "image=" CONFIG_BOOT_DIR "/uImage\0" \
89 "uboot=u-boot.imx\0" \
90 "fdt_file=" CONFIG_BOOT_DIR "/" CONFIG_DEFAULT_FDT_FILE "\0" \
91 "fdt_addr=0x18000000\0" \
92 "boot_fdt=yes\0" \
93 "ip_dyn=yes\0" \
Simon Glass4694a742016-10-17 20:12:39 -060094 "console=" CONSOLE_DEV "\0" \
Akshay Bhat9301aea2016-07-29 11:44:46 -040095 "fdt_high=0xffffffff\0" \
96 "initrd_high=0xffffffff\0" \
97 "sddev=0\0" \
98 "emmcdev=1\0" \
99 "partnum=1\0" \
100 "loadcmd=" CONFIG_LOADCMD "\0" \
101 "rfspart=" CONFIG_RFSPART "\0" \
102 "update_sd_firmware=" \
103 "if test ${ip_dyn} = yes; then " \
104 "setenv get_cmd dhcp; " \
105 "else " \
106 "setenv get_cmd tftp; " \
107 "fi; " \
108 "if mmc dev ${mmcdev}; then " \
109 "if ${get_cmd} ${update_sd_firmware_filename}; then " \
110 "setexpr fw_sz ${filesize} / 0x200; " \
111 "setexpr fw_sz ${fw_sz} + 1; " \
112 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
113 "fi; " \
114 "fi\0" \
115 "update_sf_uboot=" \
116 "if tftp $loadaddr $uboot; then " \
117 "sf probe; " \
118 "sf erase 0 0xC0000; " \
119 "sf write $loadaddr 0x400 $filesize; " \
120 "echo 'U-Boot upgraded. Please reset'; " \
121 "fi\0" \
122 "setargs=setenv bootargs console=${console},${baudrate} " \
123 "root=/dev/${rootdev} rw rootwait " CONFIG_EXTRA_BOOTARGS "\0" \
124 "loadbootscript=" \
125 "${loadcmd} ${dev} ${devnum}:${partnum} ${loadaddr} ${script};\0" \
126 "bootscript=echo Running bootscript from ${dev}:${devnum}:${partnum};" \
127 " source\0" \
128 "loadimage=" \
129 "${loadcmd} ${dev} ${devnum}:${partnum} ${loadaddr} ${image}\0" \
130 "loadfdt=${loadcmd} ${dev} ${devnum}:${partnum} ${fdt_addr} ${fdt_file}\0" \
131 "tryboot=" \
132 "if run loadbootscript; then " \
133 "run bootscript; " \
134 "else " \
135 "if run loadimage; then " \
136 "run doboot; " \
137 "fi; " \
138 "fi;\0" \
139 "doboot=echo Booting from ${dev}:${devnum}:${partnum} ...; " \
140 "run setargs; " \
141 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
142 "if run loadfdt; then " \
143 "bootm ${loadaddr} - ${fdt_addr}; " \
144 "else " \
145 "if test ${boot_fdt} = try; then " \
146 "bootm; " \
147 "else " \
148 "echo WARN: Cannot load the DT; " \
149 "fi; " \
150 "fi; " \
151 "else " \
152 "bootm; " \
153 "fi;\0" \
154 "netargs=setenv bootargs console=${console},${baudrate} " \
155 "root=/dev/nfs " \
156 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
157 "netboot=echo Booting from net ...; " \
158 "run netargs; " \
159 "if test ${ip_dyn} = yes; then " \
160 "setenv get_cmd dhcp; " \
161 "else " \
162 "setenv get_cmd tftp; " \
163 "fi; " \
164 "${get_cmd} ${image}; " \
165 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
166 "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
167 "bootm ${loadaddr} - ${fdt_addr}; " \
168 "else " \
169 "if test ${boot_fdt} = try; then " \
170 "bootm; " \
171 "else " \
172 "echo WARN: Cannot load the DT; " \
173 "fi; " \
174 "fi; " \
175 "else " \
176 "bootm; " \
177 "fi;\0" \
178
179#define CONFIG_BOOTCOMMAND \
180 "usb start; " \
181 "setenv dev usb; " \
182 "setenv devnum 0; " \
183 "setenv rootdev sda${rfspart}; " \
184 "run tryboot; " \
185 \
186 "setenv dev mmc; " \
187 "setenv rootdev mmcblk0p${rfspart}; " \
188 \
189 "setenv devnum ${sddev}; " \
190 "if mmc dev ${devnum}; then " \
191 "run tryboot; " \
192 "fi; " \
193 \
194 "setenv devnum ${emmcdev}; " \
195 "setenv rootdev mmcblk${emmcdev}p${rfspart}; " \
196 "if mmc dev ${devnum}; then " \
197 "run tryboot; " \
198 "fi; " \
199 \
200 "bmode usb; " \
201
202#define CONFIG_ARP_TIMEOUT 200UL
203
204/* Miscellaneous configurable options */
205#define CONFIG_SYS_LONGHELP
206#define CONFIG_AUTO_COMPLETE
207
Akshay Bhat9301aea2016-07-29 11:44:46 -0400208#define CONFIG_SYS_MEMTEST_START 0x10000000
209#define CONFIG_SYS_MEMTEST_END 0x10010000
210#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
211
212#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
213
214#define CONFIG_CMDLINE_EDITING
Akshay Bhat9301aea2016-07-29 11:44:46 -0400215
216/* Physical Memory Map */
217#define CONFIG_NR_DRAM_BANKS 1
218#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
219
220#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
221#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
222#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
223
224#define CONFIG_SYS_INIT_SP_OFFSET \
225 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
226#define CONFIG_SYS_INIT_SP_ADDR \
227 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
228
229/* FLASH and environment organization */
Akshay Bhat9301aea2016-07-29 11:44:46 -0400230
Akshay Bhat9301aea2016-07-29 11:44:46 -0400231#define CONFIG_ENV_SIZE (8 * 1024)
232#define CONFIG_ENV_OFFSET (768 * 1024)
233#define CONFIG_ENV_SECT_SIZE (64 * 1024)
234#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
235#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
236#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
237#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
238
239#ifndef CONFIG_SYS_DCACHE_OFF
240#endif
241
242#define CONFIG_SYS_FSL_USDHC_NUM 3
243
244/* Framebuffer */
Yung-Ching LIN7bcb3892017-03-29 01:51:22 +0800245#ifdef CONFIG_VIDEO
Akshay Bhat9301aea2016-07-29 11:44:46 -0400246#define CONFIG_VIDEO_IPUV3
Akshay Bhat9301aea2016-07-29 11:44:46 -0400247#define CONFIG_VIDEO_BMP_RLE8
248#define CONFIG_SPLASH_SCREEN
249#define CONFIG_SPLASH_SCREEN_ALIGN
250#define CONFIG_BMP_16BPP
251#define CONFIG_VIDEO_LOGO
252#define CONFIG_VIDEO_BMP_LOGO
Akshay Bhat9301aea2016-07-29 11:44:46 -0400253#define CONFIG_IMX_HDMI
254#define CONFIG_IMX_VIDEO_SKIP
Yung-Ching LIN7bcb3892017-03-29 01:51:22 +0800255#endif
Akshay Bhat9301aea2016-07-29 11:44:46 -0400256
257#define CONFIG_PWM_IMX
258#define CONFIG_IMX6_PWM_PER_CLK 66000000
259
Akshay Bhat9301aea2016-07-29 11:44:46 -0400260#ifdef CONFIG_CMD_PCI
Akshay Bhat9301aea2016-07-29 11:44:46 -0400261#define CONFIG_PCI_SCAN_SHOW
262#define CONFIG_PCIE_IMX
263#define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(7, 12)
264#define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(1, 5)
265#endif
266
267/* I2C Configs */
268#define CONFIG_SYS_I2C
269#define CONFIG_SYS_I2C_MXC
270#define CONFIG_SYS_I2C_SPEED 100000
271#define CONFIG_SYS_I2C_MXC_I2C1
272#define CONFIG_SYS_I2C_MXC_I2C2
273#define CONFIG_SYS_I2C_MXC_I2C3
274
275#endif /* __ADVANTECH_DMSBA16_CONFIG_H */