blob: 20d43424b9f99fa9e54ae54acf4e3fd3813db95e [file] [log] [blame]
Karicheri, Muralidharanf89c87f2014-04-04 13:16:51 -04001/*
2 * (C) Copyright 2004-2014
3 * Texas Instruments, <www.ti.com>
4 *
5 * Some changes copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
6 *
7 * SPDX-License-Identifier: GPL-2.0+
8 */
9#ifndef _DAVINCI_I2C_H_
10#define _DAVINCI_I2C_H_
11
12#define I2C_WRITE 0
13#define I2C_READ 1
14
Vitaly Andrianovbc9cd952014-04-04 13:16:52 -040015struct i2c_regs {
16 u32 i2c_oa;
17 u32 i2c_ie;
18 u32 i2c_stat;
19 u32 i2c_scll;
20 u32 i2c_sclh;
21 u32 i2c_cnt;
22 u32 i2c_drr;
23 u32 i2c_sa;
24 u32 i2c_dxr;
25 u32 i2c_con;
26 u32 i2c_iv;
27 u32 res_2c;
28 u32 i2c_psc;
29};
Karicheri, Muralidharanf89c87f2014-04-04 13:16:51 -040030
31/* I2C masks */
32
33/* I2C Interrupt Enable Register (I2C_IE): */
34#define I2C_IE_SCD_IE (1 << 5) /* Stop condition detect interrupt enable */
35#define I2C_IE_XRDY_IE (1 << 4) /* Transmit data ready interrupt enable */
36#define I2C_IE_RRDY_IE (1 << 3) /* Receive data ready interrupt enable */
37#define I2C_IE_ARDY_IE (1 << 2) /* Register access ready interrupt enable */
38#define I2C_IE_NACK_IE (1 << 1) /* No acknowledgment interrupt enable */
39#define I2C_IE_AL_IE (1 << 0) /* Arbitration lost interrupt enable */
40
41/* I2C Status Register (I2C_STAT): */
42
43#define I2C_STAT_BB (1 << 12) /* Bus busy */
44#define I2C_STAT_ROVR (1 << 11) /* Receive overrun */
45#define I2C_STAT_XUDF (1 << 10) /* Transmit underflow */
46#define I2C_STAT_AAS (1 << 9) /* Address as slave */
47#define I2C_STAT_SCD (1 << 5) /* Stop condition detect */
48#define I2C_STAT_XRDY (1 << 4) /* Transmit data ready */
49#define I2C_STAT_RRDY (1 << 3) /* Receive data ready */
50#define I2C_STAT_ARDY (1 << 2) /* Register access ready */
51#define I2C_STAT_NACK (1 << 1) /* No acknowledgment interrupt enable */
52#define I2C_STAT_AL (1 << 0) /* Arbitration lost interrupt enable */
53
54/* I2C Interrupt Code Register (I2C_INTCODE): */
55
56#define I2C_INTCODE_MASK 7
57#define I2C_INTCODE_NONE 0
58#define I2C_INTCODE_AL 1 /* Arbitration lost */
59#define I2C_INTCODE_NAK 2 /* No acknowledgement/general call */
60#define I2C_INTCODE_ARDY 3 /* Register access ready */
61#define I2C_INTCODE_RRDY 4 /* Rcv data ready */
62#define I2C_INTCODE_XRDY 5 /* Xmit data ready */
63#define I2C_INTCODE_SCD 6 /* Stop condition detect */
64
65/* I2C Configuration Register (I2C_CON): */
66
67#define I2C_CON_EN (1 << 5) /* I2C module enable */
68#define I2C_CON_STB (1 << 4) /* Start byte mode (master mode only) */
69#define I2C_CON_MST (1 << 10) /* Master/slave mode */
70#define I2C_CON_TRX (1 << 9) /* Tx/Rx mode (master mode only) */
71#define I2C_CON_XA (1 << 8) /* Expand address */
72#define I2C_CON_STP (1 << 11) /* Stop condition (master mode only) */
73#define I2C_CON_STT (1 << 13) /* Start condition (master mode only) */
74#define I2C_CON_FREE (1 << 14) /* Free run on emulation */
75
76#define I2C_TIMEOUT 0xffff0000 /* Timeout mask for poll_i2c_irq() */
77
78#endif