| Max Krummenacher | 3b74ccf | 2016-11-30 19:43:08 +0100 | [diff] [blame] | 1 | if TARGET_APALIS_IMX6 |
| 2 | |
| 3 | config SYS_BOARD |
| 4 | default "apalis_imx6" |
| 5 | |
| 6 | config SYS_CONFIG_NAME |
| 7 | default "apalis_imx6" |
| 8 | |
| 9 | config SYS_CPU |
| 10 | default "armv7" |
| 11 | |
| 12 | config SYS_SOC |
| 13 | default "mx6" |
| 14 | |
| 15 | config SYS_VENDOR |
| 16 | default "toradex" |
| 17 | |
| 18 | config TDX_CFG_BLOCK |
| 19 | default y |
| 20 | |
| 21 | config TDX_HAVE_MMC |
| 22 | default y |
| 23 | |
| 24 | config TDX_CFG_BLOCK_DEV |
| 25 | default "0" |
| 26 | |
| 27 | config TDX_CFG_BLOCK_PART |
| 28 | default "1" |
| 29 | |
| 30 | # Toradex config block in eMMC, at the end of 1st "boot sector" |
| 31 | config TDX_CFG_BLOCK_OFFSET |
| 32 | default "-512" |
| 33 | |
| 34 | config TDX_CMD_IMX_MFGR |
| 35 | bool "Enable factory testing commands for Toradex iMX 6 modules" |
| 36 | help |
| 37 | This adds the commands |
| 38 | pf0100_otp_prog - Program the OTP fuses on the PMIC PF0100 |
| 39 | If executed on already fused modules it doesn't change any fuse setting. |
| 40 | default y |
| 41 | |
| 42 | config TDX_APALIS_IMX6_V1_0 |
| 43 | bool "Apalis iMX6 V1.0 HW" |
| 44 | help |
| 45 | Apalis iMX6 V1.0 HW has a different pinout for the UART. |
| 46 | The UARTs must be used in DCE mode, RTS/CTS are swapped and |
| 47 | thus unusable on standard carrier boards. |
| 48 | This option configures DCE mode unconditionally. Whithout this |
| 49 | option the config block stating V1.0 HW selects DCE mode, |
| 50 | otherwise the UARTs are configuered in DTE mode. |
| 51 | default n |
| 52 | |
| 53 | source "board/toradex/common/Kconfig" |
| 54 | |
| 55 | endif |