blob: 7a739e39d72fd0c1163414e3749acd50c0f024a0 [file] [log] [blame]
Jason Cooper8d038fa2011-10-03 13:49:53 +05301/*
2 * (C) Copyright 2011
3 * Jason Cooper <u-boot@lakedaemon.net>
4 *
5 * Based on work by:
6 * Marvell Semiconductor <www.marvell.com>
7 * Written-by: Siddarth Gore <gores@marvell.com>
8 *
Wolfgang Denkd79de1d2013-07-08 09:37:19 +02009 * SPDX-License-Identifier: GPL-2.0+
Jason Cooper8d038fa2011-10-03 13:49:53 +053010 */
11
12#ifndef _CONFIG_DREAMPLUG_H
13#define _CONFIG_DREAMPLUG_H
14
15/*
Jason Cooper8d038fa2011-10-03 13:49:53 +053016 * High Level Configuration Options (easy to change)
17 */
18#define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */
Jason Cooper8d038fa2011-10-03 13:49:53 +053019#define CONFIG_MACH_TYPE MACH_TYPE_DREAMPLUG
Quentin Armitage82a0ceb2015-10-28 00:47:19 +000020
21/*
Jason Cooper8d038fa2011-10-03 13:49:53 +053022 * Commands configuration
23 */
Jason Cooper8d038fa2011-10-03 13:49:53 +053024
25/*
Quentin Armitagea99ac8a2015-10-28 00:47:21 +000026 * mv-plug-common.h should be defined after CMD configs since it used them
Jason Cooper8d038fa2011-10-03 13:49:53 +053027 * to enable certain macros
28 */
Quentin Armitagea99ac8a2015-10-28 00:47:21 +000029#include "mv-plug-common.h"
Jason Cooper8d038fa2011-10-03 13:49:53 +053030
31/*
32 * Environment variables configurations
33 */
34#ifdef CONFIG_SPI_FLASH
Jason Cooper8d038fa2011-10-03 13:49:53 +053035#define CONFIG_ENV_SECT_SIZE 0x10000 /* 64k */
Jason Cooper8d038fa2011-10-03 13:49:53 +053036#endif
37
38#ifdef CONFIG_CMD_SF
Jason Cooper8d038fa2011-10-03 13:49:53 +053039#define CONFIG_HARD_SPI 1
40#define CONFIG_KIRKWOOD_SPI 1
Jason Cooper8d038fa2011-10-03 13:49:53 +053041#define CONFIG_ENV_SPI_BUS 0
42#define CONFIG_ENV_SPI_CS 0
43#define CONFIG_ENV_SPI_MAX_HZ 50000000 /* 50 MHz */
44#endif
45
46/*
47 * max 4k env size is enough, but in case of nand
48 * it has to be rounded to sector size
49 */
50#define CONFIG_ENV_SIZE 0x1000 /* 4k */
51#define CONFIG_ENV_ADDR 0x100000
52#define CONFIG_ENV_OFFSET 0x100000 /* env starts here */
53
54/*
55 * Default environment variables
56 */
57#define CONFIG_BOOTCOMMAND "setenv ethact egiga0; " \
58 "${x_bootcmd_ethernet}; setenv ethact egiga1; " \
59 "${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\
60 "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \
61 "bootm 0x6400000;"
62
63#define CONFIG_EXTRA_ENV_SETTINGS \
64 "x_bootcmd_ethernet=ping 192.168.2.1\0" \
65 "x_bootcmd_usb=usb start\0" \
66 "x_bootcmd_kernel=fatload usb 0 0x6400000 uImage\0" \
67 "x_bootargs=console=ttyS0,115200\0" \
68 "x_bootargs_root=root=/dev/sda2 rootdelay=10\0"
69
70/*
71 * Ethernet Driver configuration
72 */
73#ifdef CONFIG_CMD_NET
74#define CONFIG_MVGBE_PORTS {1, 1} /* enable both ports */
75#define CONFIG_PHY_BASE_ADR 0
76#endif /* CONFIG_CMD_NET */
77
78/*
79 * SATA Driver configuration
80 */
81#ifdef CONFIG_MVSATA_IDE
82#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
83#endif /*CONFIG_MVSATA_IDE*/
84
Jason Cooper8d038fa2011-10-03 13:49:53 +053085#endif /* _CONFIG_DREAMPLUG_H */