blob: f25a9407891eae894be347611656c5dd9d23bb27 [file] [log] [blame]
Dirk Behme2781f802009-01-27 18:19:12 +01001/*
2 * (C) Copyright 2006-2008
3 * Texas Instruments.
4 * Richard Woodruff <r-woodruff2@ti.com>
5 * Syed Mohammed Khasim <x0khasim@ti.com>
6 *
7 * Configuration settings for the TI OMAP3530 Beagle board.
8 *
Wolfgang Denkbd8ec7e2013-10-07 13:07:26 +02009 * SPDX-License-Identifier: GPL-2.0+
Dirk Behme2781f802009-01-27 18:19:12 +010010 */
11
12#ifndef __CONFIG_H
13#define __CONFIG_H
Dirk Behme2781f802009-01-27 18:19:12 +010014
Tom Rinie10247f2014-04-03 15:17:15 -040015#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */
16
Dirk Behme2781f802009-01-27 18:19:12 +010017/*
Tom Rinie10247f2014-04-03 15:17:15 -040018 * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
19 * 64 bytes before this address should be set aside for u-boot.img's
20 * header. That is 0x800FFFC0--0x80100000 should not be used for any
21 * other needs. We use this rather than the inherited defines from
22 * ti_armv7_common.h for backwards compatibility.
Dirk Behme2781f802009-01-27 18:19:12 +010023 */
Tom Rinie10247f2014-04-03 15:17:15 -040024#define CONFIG_SYS_TEXT_BASE 0x80100000
25#define CONFIG_SPL_BSS_START_ADDR 0x80000000
26#define CONFIG_SPL_BSS_MAX_SIZE (512 << 10) /* 512 KB */
27#define CONFIG_SYS_SPL_MALLOC_START 0x80208000
28#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
Vaibhav Hiremath558d23d2010-06-07 15:20:34 -040029
Tom Rinie10247f2014-04-03 15:17:15 -040030#include <configs/ti_omap3_common.h>
Dirk Behme2781f802009-01-27 18:19:12 +010031
Sanjeev Premie32ef2e2009-04-27 21:27:27 +053032/*
33 * Display CPU and Board information
34 */
35#define CONFIG_DISPLAY_CPUINFO 1
36#define CONFIG_DISPLAY_BOARDINFO 1
37
Dirk Behme2781f802009-01-27 18:19:12 +010038#define CONFIG_MISC_INIT_R
39
Dirk Behme2781f802009-01-27 18:19:12 +010040#define CONFIG_REVISION_TAG 1
Dirk Behme2781f802009-01-27 18:19:12 +010041#define CONFIG_ENV_OVERWRITE
Dirk Behme2781f802009-01-27 18:19:12 +010042
Jason Kridnerc3ef8bc2011-04-18 17:23:35 -040043/* Status LED */
44#define CONFIG_STATUS_LED 1
45#define CONFIG_BOARD_SPECIFIC_LED 1
46#define STATUS_LED_BIT 0x01
47#define STATUS_LED_STATE STATUS_LED_ON
48#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
49#define STATUS_LED_BIT1 0x02
50#define STATUS_LED_STATE1 STATUS_LED_ON
51#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2)
52#define STATUS_LED_BOOT STATUS_LED_BIT
53#define STATUS_LED_GREEN STATUS_LED_BIT1
54
Jason Kridner0d471612011-07-22 23:42:44 -050055/* Enable Multi Bus support for I2C */
56#define CONFIG_I2C_MULTI_BUS 1
57
58/* Probe all devices */
Sanjeev Premid6b374e2011-09-05 00:25:53 +000059#define CONFIG_SYS_I2C_NOPROBES {{0x0, 0x0}}
Jason Kridner0d471612011-07-22 23:42:44 -050060
Tom Rix53ea42e2009-10-31 12:37:43 -050061/* USB */
Ilya Yanok222f4372012-11-06 13:48:31 +000062#define CONFIG_MUSB_GADGET
63#define CONFIG_USB_MUSB_OMAP2PLUS
64#define CONFIG_MUSB_PIO_ONLY
65#define CONFIG_USB_GADGET_DUALSPEED
Tom Rix53ea42e2009-10-31 12:37:43 -050066#define CONFIG_TWL4030_USB 1
Ilya Yanokcb7b2b82012-11-06 13:48:30 +000067#define CONFIG_USB_ETHER
68#define CONFIG_USB_ETHER_RNDIS
Rob Herring15ad52a2014-05-05 15:08:11 -050069#define CONFIG_USB_GADGET
70#define CONFIG_USB_GADGET_VBUS_DRAW 0
71#define CONFIG_USBDOWNLOAD_GADGET
72#define CONFIG_G_DNL_VENDOR_NUM 0x0451
73#define CONFIG_G_DNL_PRODUCT_NUM 0xd022
74#define CONFIG_G_DNL_MANUFACTURER "TI"
75#define CONFIG_CMD_FASTBOOT
76#define CONFIG_ANDROID_BOOT_IMAGE
77#define CONFIG_USB_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR
78#define CONFIG_USB_FASTBOOT_BUF_SIZE 0x07000000
Tom Rix53ea42e2009-10-31 12:37:43 -050079
Alexander Holler8f6f15c2011-04-19 09:30:35 -040080/* USB EHCI */
81#define CONFIG_CMD_USB
82#define CONFIG_USB_EHCI
Govindraj.Rc5e57072012-02-06 03:55:32 +000083
Ilya Yanok7ad75782012-02-06 03:55:33 +000084#define CONFIG_USB_EHCI_OMAP
Ilya Yanok7ad75782012-02-06 03:55:33 +000085#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 147
86
Alexander Holler8f6f15c2011-04-19 09:30:35 -040087#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
Koen Kooi8dc845e2011-06-17 09:31:09 +020088#define CONFIG_USB_HOST_ETHER
Koen Kooi43c867c2011-06-17 09:47:08 +020089#define CONFIG_USB_ETHER_ASIX
Gerhard Sittig42436a92014-03-08 19:46:16 +010090#define CONFIG_USB_ETHER_MCS7830
Gerhard Sittig9cf64902014-03-08 19:46:15 +010091#define CONFIG_USB_ETHER_SMSC95XX
Koen Kooi8dc845e2011-06-17 09:31:09 +020092
Stefan Roese1b461252013-12-17 14:14:06 +010093/* GPIO banks */
94#define CONFIG_OMAP3_GPIO_5 /* GPIO128..159 is in GPIO bank 5 */
95#define CONFIG_OMAP3_GPIO_6 /* GPIO160..191 is in GPIO bank 6 */
Alexander Holler8f6f15c2011-04-19 09:30:35 -040096
Dirk Behme2781f802009-01-27 18:19:12 +010097/* commands to include */
98#include <config_cmd_default.h>
99
Tom Rinia3a42532012-05-21 11:20:46 +0000100#define CONFIG_CMD_ASKENV
101
Heiko Schocher762cb702010-09-17 13:10:31 +0200102#define CONFIG_CMD_CACHE
Tom Rinie10247f2014-04-03 15:17:15 -0400103
Nishanth Menonddb14ac2009-03-25 22:13:56 +0100104#define MTDIDS_DEFAULT "nand0=nand"
105#define MTDPARTS_DEFAULT "mtdparts=nand:512k(x-loader),"\
106 "1920k(u-boot),128k(u-boot-env),"\
107 "4m(kernel),-(fs)"
Dirk Behme2781f802009-01-27 18:19:12 +0100108
Alexander Holler8f6f15c2011-04-19 09:30:35 -0400109#define CONFIG_USB_STORAGE /* USB storage support */
Dirk Behme2781f802009-01-27 18:19:12 +0100110#define CONFIG_CMD_NAND /* NAND support */
Jason Kridnerc3ef8bc2011-04-18 17:23:35 -0400111#define CONFIG_CMD_LED /* LED support */
Jason Kridner71bd3af2011-09-03 23:30:34 -0400112#define CONFIG_CMD_SETEXPR /* Evaluate expressions */
Joel Fernandes0455fa92011-09-11 08:37:33 +0000113#define CONFIG_CMD_GPIO /* Enable gpio command */
Tyler Bakerab6c9322014-06-23 11:11:29 -0700114#define CONFIG_CMD_DHCP
Dirk Behme2781f802009-01-27 18:19:12 +0100115
Koen Kooi31c5d7d2011-06-21 22:18:01 +0200116#define CONFIG_VIDEO_OMAP3 /* DSS Support */
Dirk Behme2781f802009-01-27 18:19:12 +0100117
118/*
Tom Rix0f2a8042009-06-28 12:52:30 -0500119 * TWL4030
120 */
Tom Rix0f2a8042009-06-28 12:52:30 -0500121#define CONFIG_TWL4030_LED 1
122
123/*
Dirk Behme2781f802009-01-27 18:19:12 +0100124 * Board NAND Info.
125 */
Steve Sakoman09d08e02010-08-19 20:52:35 -0700126#define CONFIG_SYS_NAND_QUIET_TEST 1
Dirk Behme2781f802009-01-27 18:19:12 +0100127#define CONFIG_NAND_OMAP_GPMC
Dirk Behme2781f802009-01-27 18:19:12 +0100128#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */
129 /* devices */
Dirk Behme2781f802009-01-27 18:19:12 +0100130
Dirk Behme2781f802009-01-27 18:19:12 +0100131#define CONFIG_EXTRA_ENV_SETTINGS \
Jason Kridner6d9bbb62011-07-23 00:01:14 -0500132 "loadaddr=0x80200000\0" \
133 "rdaddr=0x81000000\0" \
Nishanth Menonb1b6e7e2013-07-15 07:11:32 -0500134 "fdt_high=0xffffffff\0" \
135 "fdtaddr=0x80f80000\0" \
Tom Rix53ea42e2009-10-31 12:37:43 -0500136 "usbtty=cdc_acm\0" \
Nishanth Menon46fcb502013-07-15 07:11:29 -0500137 "bootfile=uImage\0" \
Nishanth Menon15436692013-07-15 07:11:31 -0500138 "ramdisk=ramdisk.gz\0" \
139 "bootdir=/boot\0" \
140 "bootpart=0:2\0" \
Koen Kooi3c1c3152011-11-27 03:51:06 +0000141 "console=ttyO2,115200n8\0" \
Koen Kooi5b8018c2011-04-18 17:28:32 -0400142 "mpurate=auto\0" \
Peter Meerwalda0638f72012-07-02 03:43:31 +0000143 "buddy=none\0" \
Jason Kridner36c9cc52011-09-03 23:37:24 -0400144 "optargs=\0" \
145 "camera=none\0" \
Steve Sakomand4512522009-10-10 14:29:37 -0400146 "vram=12M\0" \
Jason Kridner6d9bbb62011-07-23 00:01:14 -0500147 "dvimode=640x480MR-16@60\0" \
Steve Sakomand4512522009-10-10 14:29:37 -0400148 "defaultdisplay=dvi\0" \
Steve Sakoman57c62412010-09-19 21:19:48 -0700149 "mmcdev=0\0" \
Steve Sakomand4512522009-10-10 14:29:37 -0400150 "mmcroot=/dev/mmcblk0p2 rw\0" \
151 "mmcrootfstype=ext3 rootwait\0" \
Steve Sakomanc4d7d722011-09-30 09:29:11 +0000152 "nandroot=ubi0:rootfs ubi.mtd=4\0" \
153 "nandrootfstype=ubifs\0" \
Jason Kridner6d9bbb62011-07-23 00:01:14 -0500154 "ramroot=/dev/ram0 rw ramdisk_size=65536 initrd=0x81000000,64M\0" \
155 "ramrootfstype=ext2\0" \
Dirk Behme2781f802009-01-27 18:19:12 +0100156 "mmcargs=setenv bootargs console=${console} " \
Jason Kridner36c9cc52011-09-03 23:37:24 -0400157 "${optargs} " \
Steve Sakoman8c8376d2010-02-03 14:39:14 -0800158 "mpurate=${mpurate} " \
Koen Kooi3e8c3732011-08-11 00:39:28 -0500159 "buddy=${buddy} "\
Jason Kridner36c9cc52011-09-03 23:37:24 -0400160 "camera=${camera} "\
Steve Sakomand4512522009-10-10 14:29:37 -0400161 "vram=${vram} " \
162 "omapfb.mode=dvi:${dvimode} " \
Steve Sakomand4512522009-10-10 14:29:37 -0400163 "omapdss.def_disp=${defaultdisplay} " \
164 "root=${mmcroot} " \
165 "rootfstype=${mmcrootfstype}\0" \
Dirk Behme2781f802009-01-27 18:19:12 +0100166 "nandargs=setenv bootargs console=${console} " \
Jason Kridner36c9cc52011-09-03 23:37:24 -0400167 "${optargs} " \
Steve Sakoman8c8376d2010-02-03 14:39:14 -0800168 "mpurate=${mpurate} " \
Koen Kooi3e8c3732011-08-11 00:39:28 -0500169 "buddy=${buddy} "\
Jason Kridner36c9cc52011-09-03 23:37:24 -0400170 "camera=${camera} "\
Steve Sakomand4512522009-10-10 14:29:37 -0400171 "vram=${vram} " \
172 "omapfb.mode=dvi:${dvimode} " \
Steve Sakomand4512522009-10-10 14:29:37 -0400173 "omapdss.def_disp=${defaultdisplay} " \
174 "root=${nandroot} " \
175 "rootfstype=${nandrootfstype}\0" \
Nishanth Menonb1b6e7e2013-07-15 07:11:32 -0500176 "findfdt=" \
177 "if test $beaglerev = AxBx; then " \
178 "setenv fdtfile omap3-beagle.dtb; fi; " \
179 "if test $beaglerev = Cx; then " \
180 "setenv fdtfile omap3-beagle.dtb; fi; " \
Robert Nelson7b379f42014-01-17 09:51:28 -0600181 "if test $beaglerev = C4; then " \
182 "setenv fdtfile omap3-beagle.dtb; fi; " \
Nishanth Menonb1b6e7e2013-07-15 07:11:32 -0500183 "if test $beaglerev = xMAB; then " \
Robert Nelson1f302672014-05-02 15:14:39 -0500184 "setenv fdtfile omap3-beagle-xm-ab.dtb; fi; " \
Nishanth Menonb1b6e7e2013-07-15 07:11:32 -0500185 "if test $beaglerev = xMC; then " \
186 "setenv fdtfile omap3-beagle-xm.dtb; fi; " \
187 "if test $fdtfile = undefined; then " \
188 "echo WARNING: Could not determine device tree to use; fi; \0" \
Robert Nelson2a2b8da2014-05-02 15:15:03 -0500189 "validatefdt=" \
190 "if test $beaglerev = xMAB; then " \
191 "if test ! -e mmc ${bootpart} ${bootdir}/${fdtfile}; then " \
192 "setenv fdtfile omap3-beagle-xm.dtb; " \
193 "fi; " \
194 "fi; \0" \
Jason Kridner85a08fb2010-07-21 07:41:25 -0500195 "bootenv=uEnv.txt\0" \
196 "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
Alexander Holler066f9002011-04-18 17:25:13 -0400197 "importbootenv=echo Importing environment from mmc ...; " \
Alexander Holler927c7512014-07-14 17:49:56 +0200198 "env import -t -r $loadaddr $filesize\0" \
Jason Kridner6d9bbb62011-07-23 00:01:14 -0500199 "ramargs=setenv bootargs console=${console} " \
200 "${optargs} " \
201 "mpurate=${mpurate} " \
202 "buddy=${buddy} "\
203 "vram=${vram} " \
204 "omapfb.mode=dvi:${dvimode} " \
205 "omapdss.def_disp=${defaultdisplay} " \
206 "root=${ramroot} " \
207 "rootfstype=${ramrootfstype}\0" \
Nishanth Menon15436692013-07-15 07:11:31 -0500208 "loadramdisk=load mmc ${bootpart} ${rdaddr} ${bootdir}/${ramdisk}\0" \
209 "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
Guillaume GARDET68357a62014-08-26 10:48:13 +0200210 "loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \
211 "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \
212 "source ${loadaddr}\0" \
Robert Nelson2a2b8da2014-05-02 15:15:03 -0500213 "loadfdt=run validatefdt; load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
Dirk Behme2781f802009-01-27 18:19:12 +0100214 "mmcboot=echo Booting from mmc ...; " \
215 "run mmcargs; " \
216 "bootm ${loadaddr}\0" \
Nishanth Menon6d419d82013-07-15 07:11:33 -0500217 "mmcbootz=echo Booting with DT from mmc${mmcdev} ...; " \
218 "run mmcargs; " \
219 "bootz ${loadaddr} - ${fdtaddr}\0" \
Dirk Behme2781f802009-01-27 18:19:12 +0100220 "nandboot=echo Booting from nand ...; " \
221 "run nandargs; " \
222 "nand read ${loadaddr} 280000 400000; " \
223 "bootm ${loadaddr}\0" \
Jason Kridner6d9bbb62011-07-23 00:01:14 -0500224 "ramboot=echo Booting from ramdisk ...; " \
225 "run ramargs; " \
226 "bootm ${loadaddr}\0" \
Joel Fernandes0455fa92011-09-11 08:37:33 +0000227 "userbutton=if gpio input 173; then run userbutton_xm; " \
228 "else run userbutton_nonxm; fi;\0" \
229 "userbutton_xm=gpio input 4;\0" \
230 "userbutton_nonxm=gpio input 7;\0"
Robert P. J. Day7fef1242012-11-11 23:20:58 +0000231/* "run userbutton" will return 1 (false) if pressed and 0 (true) if not */
Dirk Behme2781f802009-01-27 18:19:12 +0100232#define CONFIG_BOOTCOMMAND \
Nishanth Menonb1b6e7e2013-07-15 07:11:32 -0500233 "run findfdt; " \
Andrew Bradforde1c7c8a2012-10-01 05:06:52 +0000234 "mmc dev ${mmcdev}; if mmc rescan; then " \
Joel Fernandes0455fa92011-09-11 08:37:33 +0000235 "if run userbutton; then " \
236 "setenv bootenv uEnv.txt;" \
237 "else " \
Jason Kridner85a08fb2010-07-21 07:41:25 -0500238 "setenv bootenv user.txt;" \
239 "fi;" \
Alexander Holler066f9002011-04-18 17:25:13 -0400240 "echo SD/MMC found on device ${mmcdev};" \
241 "if run loadbootenv; then " \
Jason Kridner85a08fb2010-07-21 07:41:25 -0500242 "echo Loaded environment from ${bootenv};" \
Alexander Holler066f9002011-04-18 17:25:13 -0400243 "run importbootenv;" \
244 "fi;" \
245 "if test -n $uenvcmd; then " \
246 "echo Running uenvcmd ...;" \
247 "run uenvcmd;" \
248 "fi;" \
Guillaume GARDET68357a62014-08-26 10:48:13 +0200249 "if run loadbootscript; then " \
250 "run bootscript; " \
251 "else " \
252 "if run loadimage; then " \
253 "run mmcboot;" \
254 "fi;" \
255 "fi; " \
Alexander Holler066f9002011-04-18 17:25:13 -0400256 "fi;" \
257 "run nandboot;" \
Nishanth Menon6d419d82013-07-15 07:11:33 -0500258 "setenv bootfile zImage;" \
259 "if run loadimage; then " \
260 "run loadfdt;" \
261 "run mmcbootz; " \
262 "fi; " \
Dirk Behme2781f802009-01-27 18:19:12 +0100263
Dirk Behme2781f802009-01-27 18:19:12 +0100264/*
Manikandan Pillaie8b16962009-04-21 17:29:05 +0200265 * OMAP3 has 12 GP timers, they can be driven by the system clock
266 * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
267 * This rate is divided by a local divisor.
Dirk Behme2781f802009-01-27 18:19:12 +0100268 */
Manikandan Pillaie8b16962009-04-21 17:29:05 +0200269#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
Dirk Behme2781f802009-01-27 18:19:12 +0100270
271/*-----------------------------------------------------------------------
Dirk Behme2781f802009-01-27 18:19:12 +0100272 * FLASH and environment organization
273 */
274
275/* **** PISMO SUPPORT *** */
Luca Ceresoli9783a2c2011-04-20 11:02:05 -0400276#if defined(CONFIG_CMD_NAND)
pekon gupta0a9ec452014-07-18 17:59:41 +0530277#define CONFIG_SYS_FLASH_BASE NAND_BASE
Luca Ceresoli9783a2c2011-04-20 11:02:05 -0400278#endif
Dirk Behme2781f802009-01-27 18:19:12 +0100279
280/* Monitor at start of flash */
281#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
282#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP
283
284#define CONFIG_ENV_IS_IN_NAND 1
Tom Rinie10247f2014-04-03 15:17:15 -0400285#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */
Dirk Behme2781f802009-01-27 18:19:12 +0100286#define ONENAND_ENV_OFFSET 0x260000 /* environment starts here */
287#define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */
288
Luca Ceresoli9783a2c2011-04-20 11:02:05 -0400289#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */
290#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET
Dirk Behme2781f802009-01-27 18:19:12 +0100291#define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET
292
Dirk Behme78cd9ac2010-12-11 11:01:00 -0500293#define CONFIG_OMAP3_SPI
294
Aneesh Vfa5c07a2011-11-21 23:38:59 +0000295#define CONFIG_SYS_CACHELINE_SIZE 64
296
Tom Rini06c32fb2011-11-18 12:48:08 +0000297/* Defines for SPL */
Tom Rini06c32fb2011-11-18 12:48:08 +0000298#define CONFIG_SPL_OMAP3_ID_NAND
Tom Rini06c32fb2011-11-18 12:48:08 +0000299
300/* NAND boot config */
pekon gupta6250faf2014-05-06 00:46:19 +0530301#define CONFIG_SYS_NAND_BUSWIDTH_16BIT 16
Tom Rini06c32fb2011-11-18 12:48:08 +0000302#define CONFIG_SYS_NAND_5_ADDR_CYCLE
303#define CONFIG_SYS_NAND_PAGE_COUNT 64
304#define CONFIG_SYS_NAND_PAGE_SIZE 2048
305#define CONFIG_SYS_NAND_OOBSIZE 64
306#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
307#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0
308#define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9,\
309 10, 11, 12, 13}
310#define CONFIG_SYS_NAND_ECCSIZE 512
311#define CONFIG_SYS_NAND_ECCBYTES 3
pekon gupta3ef49732013-11-18 19:03:01 +0530312#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW
Tom Rini06c32fb2011-11-18 12:48:08 +0000313#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
pekon gupta7909b6d2014-07-18 17:59:42 +0530314/* NAND: SPL falcon mode configs */
315#ifdef CONFIG_SPL_OS_BOOT
316#define CONFIG_CMD_SPL_NAND_OFS 0x240000
317#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000
318#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000
319#endif
Tom Rini06c32fb2011-11-18 12:48:08 +0000320
Dirk Behme2781f802009-01-27 18:19:12 +0100321#endif /* __CONFIG_H */