Shengzhou Liu | 4991240 | 2014-11-24 17:11:56 +0800 | [diff] [blame] | 1 | /* |
| 2 | * Copyright 2014 Freescale Semiconductor, Inc. |
| 3 | * |
| 4 | * SPDX-License-Identifier: GPL-2.0+ |
| 5 | */ |
| 6 | |
| 7 | /* |
| 8 | * T1024/T1023 RDB board configuration file |
| 9 | */ |
| 10 | |
| 11 | #ifndef __T1024RDB_H |
| 12 | #define __T1024RDB_H |
| 13 | |
Shengzhou Liu | 00d7e5b | 2015-03-27 15:48:34 +0800 | [diff] [blame] | 14 | #if defined(CONFIG_T1023RDB) |
| 15 | #ifdef CONFIG_SPL |
| 16 | #define CONFIG_SYS_NO_FLASH |
| 17 | #endif |
| 18 | #endif |
| 19 | |
Shengzhou Liu | 4991240 | 2014-11-24 17:11:56 +0800 | [diff] [blame] | 20 | /* High Level Configuration Options */ |
| 21 | #define CONFIG_SYS_GENERIC_BOARD |
| 22 | #define CONFIG_DISPLAY_BOARDINFO |
| 23 | #define CONFIG_BOOKE |
| 24 | #define CONFIG_E500 /* BOOKE e500 family */ |
| 25 | #define CONFIG_E500MC /* BOOKE e500mc family */ |
| 26 | #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ |
| 27 | #define CONFIG_MP /* support multiple processors */ |
| 28 | #define CONFIG_PHYS_64BIT |
| 29 | #define CONFIG_ENABLE_36BIT_PHYS |
| 30 | |
| 31 | #ifdef CONFIG_PHYS_64BIT |
| 32 | #define CONFIG_ADDR_MAP 1 |
| 33 | #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ |
| 34 | #endif |
| 35 | |
| 36 | #define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ |
| 37 | #define CONFIG_SYS_NUM_CPC CONFIG_NUM_DDR_CONTROLLERS |
| 38 | #define CONFIG_FSL_IFC /* Enable IFC Support */ |
| 39 | |
| 40 | #define CONFIG_FSL_LAW /* Use common FSL init code */ |
| 41 | #define CONFIG_ENV_OVERWRITE |
| 42 | |
| 43 | /* support deep sleep */ |
Shengzhou Liu | 00d7e5b | 2015-03-27 15:48:34 +0800 | [diff] [blame] | 44 | #ifdef CONFIG_PPC_T1024 |
Shengzhou Liu | 4991240 | 2014-11-24 17:11:56 +0800 | [diff] [blame] | 45 | #define CONFIG_DEEP_SLEEP |
Shengzhou Liu | 00d7e5b | 2015-03-27 15:48:34 +0800 | [diff] [blame] | 46 | #endif |
tang yuantian | 8dc02f3 | 2014-12-17 15:42:54 +0800 | [diff] [blame] | 47 | #if defined(CONFIG_DEEP_SLEEP) |
Shengzhou Liu | 4991240 | 2014-11-24 17:11:56 +0800 | [diff] [blame] | 48 | #define CONFIG_SILENT_CONSOLE |
tang yuantian | 8dc02f3 | 2014-12-17 15:42:54 +0800 | [diff] [blame] | 49 | #define CONFIG_BOARD_EARLY_INIT_F |
| 50 | #endif |
Shengzhou Liu | 4991240 | 2014-11-24 17:11:56 +0800 | [diff] [blame] | 51 | |
| 52 | #ifdef CONFIG_RAMBOOT_PBL |
| 53 | #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t102xrdb/t1024_pbi.cfg |
Shengzhou Liu | 00d7e5b | 2015-03-27 15:48:34 +0800 | [diff] [blame] | 54 | #if defined(CONFIG_T1024RDB) |
Shengzhou Liu | 4991240 | 2014-11-24 17:11:56 +0800 | [diff] [blame] | 55 | #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1024_rcw.cfg |
Shengzhou Liu | 00d7e5b | 2015-03-27 15:48:34 +0800 | [diff] [blame] | 56 | #elif defined(CONFIG_T1023RDB) |
| 57 | #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1023_rcw.cfg |
| 58 | #endif |
Shengzhou Liu | 4991240 | 2014-11-24 17:11:56 +0800 | [diff] [blame] | 59 | #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT |
| 60 | #define CONFIG_SPL_ENV_SUPPORT |
| 61 | #define CONFIG_SPL_SERIAL_SUPPORT |
| 62 | #define CONFIG_SPL_FLUSH_IMAGE |
| 63 | #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" |
| 64 | #define CONFIG_SPL_LIBGENERIC_SUPPORT |
| 65 | #define CONFIG_SPL_LIBCOMMON_SUPPORT |
| 66 | #define CONFIG_SPL_I2C_SUPPORT |
| 67 | #define CONFIG_SPL_DRIVERS_MISC_SUPPORT |
| 68 | #define CONFIG_FSL_LAW /* Use common FSL init code */ |
tang yuantian | 8dc02f3 | 2014-12-17 15:42:54 +0800 | [diff] [blame] | 69 | #define CONFIG_SYS_TEXT_BASE 0x30001000 |
Shengzhou Liu | 4991240 | 2014-11-24 17:11:56 +0800 | [diff] [blame] | 70 | #define CONFIG_SPL_TEXT_BASE 0xFFFD8000 |
| 71 | #define CONFIG_SPL_PAD_TO 0x40000 |
| 72 | #define CONFIG_SPL_MAX_SIZE 0x28000 |
| 73 | #define RESET_VECTOR_OFFSET 0x27FFC |
| 74 | #define BOOT_PAGE_OFFSET 0x27000 |
| 75 | #ifdef CONFIG_SPL_BUILD |
| 76 | #define CONFIG_SPL_SKIP_RELOCATE |
| 77 | #define CONFIG_SPL_COMMON_INIT_DDR |
| 78 | #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE |
| 79 | #define CONFIG_SYS_NO_FLASH |
| 80 | #endif |
| 81 | |
| 82 | #ifdef CONFIG_NAND |
| 83 | #define CONFIG_SPL_NAND_SUPPORT |
| 84 | #define CONFIG_SYS_NAND_U_BOOT_SIZE (768 << 10) |
tang yuantian | 8dc02f3 | 2014-12-17 15:42:54 +0800 | [diff] [blame] | 85 | #define CONFIG_SYS_NAND_U_BOOT_DST 0x30000000 |
| 86 | #define CONFIG_SYS_NAND_U_BOOT_START 0x30000000 |
Shengzhou Liu | 4991240 | 2014-11-24 17:11:56 +0800 | [diff] [blame] | 87 | #define CONFIG_SYS_NAND_U_BOOT_OFFS (256 << 10) |
| 88 | #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" |
| 89 | #define CONFIG_SPL_NAND_BOOT |
| 90 | #endif |
| 91 | |
| 92 | #ifdef CONFIG_SPIFLASH |
tang yuantian | 8dc02f3 | 2014-12-17 15:42:54 +0800 | [diff] [blame] | 93 | #define CONFIG_RESET_VECTOR_ADDRESS 0x30000FFC |
Shengzhou Liu | 4991240 | 2014-11-24 17:11:56 +0800 | [diff] [blame] | 94 | #define CONFIG_SPL_SPI_SUPPORT |
| 95 | #define CONFIG_SPL_SPI_FLASH_SUPPORT |
| 96 | #define CONFIG_SPL_SPI_FLASH_MINIMAL |
| 97 | #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10) |
tang yuantian | 8dc02f3 | 2014-12-17 15:42:54 +0800 | [diff] [blame] | 98 | #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x30000000) |
| 99 | #define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x30000000) |
Shengzhou Liu | 4991240 | 2014-11-24 17:11:56 +0800 | [diff] [blame] | 100 | #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (256 << 10) |
| 101 | #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" |
| 102 | #ifndef CONFIG_SPL_BUILD |
| 103 | #define CONFIG_SYS_MPC85XX_NO_RESETVEC |
| 104 | #endif |
| 105 | #define CONFIG_SPL_SPI_BOOT |
| 106 | #endif |
| 107 | |
| 108 | #ifdef CONFIG_SDCARD |
tang yuantian | 8dc02f3 | 2014-12-17 15:42:54 +0800 | [diff] [blame] | 109 | #define CONFIG_RESET_VECTOR_ADDRESS 0x30000FFC |
Shengzhou Liu | 4991240 | 2014-11-24 17:11:56 +0800 | [diff] [blame] | 110 | #define CONFIG_SPL_MMC_SUPPORT |
| 111 | #define CONFIG_SPL_MMC_MINIMAL |
| 112 | #define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10) |
tang yuantian | 8dc02f3 | 2014-12-17 15:42:54 +0800 | [diff] [blame] | 113 | #define CONFIG_SYS_MMC_U_BOOT_DST (0x30000000) |
| 114 | #define CONFIG_SYS_MMC_U_BOOT_START (0x30000000) |
Shengzhou Liu | 4991240 | 2014-11-24 17:11:56 +0800 | [diff] [blame] | 115 | #define CONFIG_SYS_MMC_U_BOOT_OFFS (260 << 10) |
| 116 | #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" |
| 117 | #ifndef CONFIG_SPL_BUILD |
| 118 | #define CONFIG_SYS_MPC85XX_NO_RESETVEC |
| 119 | #endif |
| 120 | #define CONFIG_SPL_MMC_BOOT |
| 121 | #endif |
| 122 | |
| 123 | #endif /* CONFIG_RAMBOOT_PBL */ |
| 124 | |
| 125 | #ifndef CONFIG_SYS_TEXT_BASE |
| 126 | #define CONFIG_SYS_TEXT_BASE 0xeff40000 |
| 127 | #endif |
| 128 | |
| 129 | #ifndef CONFIG_RESET_VECTOR_ADDRESS |
| 130 | #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc |
| 131 | #endif |
| 132 | |
| 133 | #ifndef CONFIG_SYS_NO_FLASH |
| 134 | #define CONFIG_FLASH_CFI_DRIVER |
| 135 | #define CONFIG_SYS_FLASH_CFI |
| 136 | #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE |
| 137 | #endif |
| 138 | |
| 139 | /* PCIe Boot - Master */ |
| 140 | #define CONFIG_SRIO_PCIE_BOOT_MASTER |
| 141 | /* |
| 142 | * for slave u-boot IMAGE instored in master memory space, |
| 143 | * PHYS must be aligned based on the SIZE |
| 144 | */ |
| 145 | #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull |
| 146 | #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000 /* 1M */ |
| 147 | #ifdef CONFIG_PHYS_64BIT |
| 148 | #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull |
| 149 | #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull |
| 150 | #else |
| 151 | #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xef200000 |
| 152 | #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0xfff00000 |
| 153 | #endif |
| 154 | /* |
| 155 | * for slave UCODE and ENV instored in master memory space, |
| 156 | * PHYS must be aligned based on the SIZE |
| 157 | */ |
| 158 | #ifdef CONFIG_PHYS_64BIT |
| 159 | #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull |
| 160 | #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull |
| 161 | #else |
| 162 | #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xef100000 |
| 163 | #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0xffe00000 |
| 164 | #endif |
| 165 | #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000 /* 256K */ |
| 166 | /* slave core release by master*/ |
| 167 | #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4 |
| 168 | #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */ |
| 169 | |
| 170 | /* PCIe Boot - Slave */ |
| 171 | #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE |
| 172 | #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000 |
| 173 | #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \ |
| 174 | (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR) |
| 175 | /* Set 1M boot space for PCIe boot */ |
| 176 | #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000) |
| 177 | #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \ |
| 178 | (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR) |
| 179 | #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc |
| 180 | #define CONFIG_SYS_NO_FLASH |
| 181 | #endif |
| 182 | |
| 183 | #if defined(CONFIG_SPIFLASH) |
| 184 | #define CONFIG_SYS_EXTRA_ENV_RELOC |
| 185 | #define CONFIG_ENV_IS_IN_SPI_FLASH |
| 186 | #define CONFIG_ENV_SPI_BUS 0 |
| 187 | #define CONFIG_ENV_SPI_CS 0 |
| 188 | #define CONFIG_ENV_SPI_MAX_HZ 10000000 |
| 189 | #define CONFIG_ENV_SPI_MODE 0 |
| 190 | #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ |
| 191 | #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ |
Shengzhou Liu | 00d7e5b | 2015-03-27 15:48:34 +0800 | [diff] [blame] | 192 | #if defined(CONFIG_T1024RDB) |
Shengzhou Liu | 4991240 | 2014-11-24 17:11:56 +0800 | [diff] [blame] | 193 | #define CONFIG_ENV_SECT_SIZE 0x10000 |
Shengzhou Liu | 00d7e5b | 2015-03-27 15:48:34 +0800 | [diff] [blame] | 194 | #elif defined(CONFIG_T1023RDB) |
| 195 | #define CONFIG_ENV_SECT_SIZE 0x40000 |
| 196 | #endif |
Shengzhou Liu | 4991240 | 2014-11-24 17:11:56 +0800 | [diff] [blame] | 197 | #elif defined(CONFIG_SDCARD) |
| 198 | #define CONFIG_SYS_EXTRA_ENV_RELOC |
| 199 | #define CONFIG_ENV_IS_IN_MMC |
| 200 | #define CONFIG_SYS_MMC_ENV_DEV 0 |
| 201 | #define CONFIG_ENV_SIZE 0x2000 |
| 202 | #define CONFIG_ENV_OFFSET (512 * 0x800) |
| 203 | #elif defined(CONFIG_NAND) |
| 204 | #define CONFIG_SYS_EXTRA_ENV_RELOC |
| 205 | #define CONFIG_ENV_IS_IN_NAND |
| 206 | #define CONFIG_ENV_SIZE 0x2000 |
Shengzhou Liu | 00d7e5b | 2015-03-27 15:48:34 +0800 | [diff] [blame] | 207 | #if defined(CONFIG_T1024RDB) |
Shengzhou Liu | 4991240 | 2014-11-24 17:11:56 +0800 | [diff] [blame] | 208 | #define CONFIG_ENV_OFFSET (2 * CONFIG_SYS_NAND_BLOCK_SIZE) |
Shengzhou Liu | 00d7e5b | 2015-03-27 15:48:34 +0800 | [diff] [blame] | 209 | #elif defined(CONFIG_T1023RDB) |
| 210 | #define CONFIG_ENV_OFFSET (10 * CONFIG_SYS_NAND_BLOCK_SIZE) |
| 211 | #endif |
Shengzhou Liu | 4991240 | 2014-11-24 17:11:56 +0800 | [diff] [blame] | 212 | #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) |
| 213 | #define CONFIG_ENV_IS_IN_REMOTE |
| 214 | #define CONFIG_ENV_ADDR 0xffe20000 |
| 215 | #define CONFIG_ENV_SIZE 0x2000 |
| 216 | #elif defined(CONFIG_ENV_IS_NOWHERE) |
| 217 | #define CONFIG_ENV_SIZE 0x2000 |
| 218 | #else |
| 219 | #define CONFIG_ENV_IS_IN_FLASH |
| 220 | #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) |
| 221 | #define CONFIG_ENV_SIZE 0x2000 |
| 222 | #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ |
| 223 | #endif |
| 224 | |
| 225 | |
| 226 | #ifndef __ASSEMBLY__ |
| 227 | unsigned long get_board_sys_clk(void); |
| 228 | unsigned long get_board_ddr_clk(void); |
| 229 | #endif |
| 230 | |
| 231 | #define CONFIG_SYS_CLK_FREQ 100000000 |
Shengzhou Liu | 00d7e5b | 2015-03-27 15:48:34 +0800 | [diff] [blame] | 232 | #define CONFIG_DDR_CLK_FREQ 100000000 |
Shengzhou Liu | 4991240 | 2014-11-24 17:11:56 +0800 | [diff] [blame] | 233 | |
| 234 | /* |
| 235 | * These can be toggled for performance analysis, otherwise use default. |
| 236 | */ |
| 237 | #define CONFIG_SYS_CACHE_STASHING |
| 238 | #define CONFIG_BACKSIDE_L2_CACHE |
| 239 | #define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E |
| 240 | #define CONFIG_BTB /* toggle branch predition */ |
| 241 | #define CONFIG_DDR_ECC |
| 242 | #ifdef CONFIG_DDR_ECC |
| 243 | #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER |
| 244 | #define CONFIG_MEM_INIT_VALUE 0xdeadbeef |
| 245 | #endif |
| 246 | |
Shengzhou Liu | 00d7e5b | 2015-03-27 15:48:34 +0800 | [diff] [blame] | 247 | #define CONFIG_CMD_MEMTEST |
Shengzhou Liu | 4991240 | 2014-11-24 17:11:56 +0800 | [diff] [blame] | 248 | #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ |
| 249 | #define CONFIG_SYS_MEMTEST_END 0x00400000 |
| 250 | #define CONFIG_SYS_ALT_MEMTEST |
| 251 | #define CONFIG_PANIC_HANG /* do not reset board on panic */ |
| 252 | |
| 253 | /* |
| 254 | * Config the L3 Cache as L3 SRAM |
| 255 | */ |
| 256 | #define CONFIG_SYS_INIT_L3_ADDR 0xFFFC0000 |
| 257 | #define CONFIG_SYS_L3_SIZE (256 << 10) |
| 258 | #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024) |
| 259 | #ifdef CONFIG_RAMBOOT_PBL |
| 260 | #define CONFIG_ENV_ADDR (CONFIG_SPL_GD_ADDR + 4 * 1024) |
| 261 | #endif |
| 262 | #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SPL_GD_ADDR + 12 * 1024) |
| 263 | #define CONFIG_SPL_RELOC_MALLOC_SIZE (30 << 10) |
| 264 | #define CONFIG_SPL_RELOC_STACK (CONFIG_SPL_GD_ADDR + 64 * 1024) |
| 265 | #define CONFIG_SPL_RELOC_STACK_SIZE (22 << 10) |
| 266 | |
| 267 | #ifdef CONFIG_PHYS_64BIT |
| 268 | #define CONFIG_SYS_DCSRBAR 0xf0000000 |
| 269 | #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull |
| 270 | #endif |
| 271 | |
| 272 | /* EEPROM */ |
| 273 | #define CONFIG_ID_EEPROM |
| 274 | #define CONFIG_SYS_I2C_EEPROM_NXID |
| 275 | #define CONFIG_SYS_EEPROM_BUS_NUM 0 |
| 276 | #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 |
| 277 | #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 |
| 278 | #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 |
| 279 | #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 |
| 280 | |
| 281 | /* |
| 282 | * DDR Setup |
| 283 | */ |
| 284 | #define CONFIG_VERY_BIG_RAM |
| 285 | #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 |
| 286 | #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE |
| 287 | #define CONFIG_DIMM_SLOTS_PER_CTLR 1 |
| 288 | #define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR) |
Shengzhou Liu | 00d7e5b | 2015-03-27 15:48:34 +0800 | [diff] [blame] | 289 | #define CONFIG_FSL_DDR_INTERACTIVE |
| 290 | #if defined(CONFIG_T1024RDB) |
Shengzhou Liu | 4991240 | 2014-11-24 17:11:56 +0800 | [diff] [blame] | 291 | #define CONFIG_DDR_SPD |
| 292 | #define CONFIG_SYS_FSL_DDR3 |
Shengzhou Liu | 4991240 | 2014-11-24 17:11:56 +0800 | [diff] [blame] | 293 | #define CONFIG_SYS_SPD_BUS_NUM 0 |
| 294 | #define SPD_EEPROM_ADDRESS 0x51 |
Shengzhou Liu | 4991240 | 2014-11-24 17:11:56 +0800 | [diff] [blame] | 295 | #define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ |
Shengzhou Liu | 00d7e5b | 2015-03-27 15:48:34 +0800 | [diff] [blame] | 296 | #elif defined(CONFIG_T1023RDB) |
| 297 | #define CONFIG_SYS_FSL_DDR4 |
| 298 | #define CONFIG_SYS_DDR_RAW_TIMING |
| 299 | #define CONFIG_SYS_SDRAM_SIZE 2048 |
| 300 | #endif |
Shengzhou Liu | 4991240 | 2014-11-24 17:11:56 +0800 | [diff] [blame] | 301 | |
| 302 | /* |
| 303 | * IFC Definitions |
| 304 | */ |
| 305 | #define CONFIG_SYS_FLASH_BASE 0xe8000000 |
| 306 | #ifdef CONFIG_PHYS_64BIT |
| 307 | #define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) |
| 308 | #else |
| 309 | #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE |
| 310 | #endif |
| 311 | |
| 312 | #define CONFIG_SYS_NOR0_CSPR_EXT (0xf) |
| 313 | #define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ |
| 314 | CSPR_PORT_SIZE_16 | \ |
| 315 | CSPR_MSEL_NOR | \ |
| 316 | CSPR_V) |
| 317 | #define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) |
| 318 | |
| 319 | /* NOR Flash Timing Params */ |
Shengzhou Liu | 00d7e5b | 2015-03-27 15:48:34 +0800 | [diff] [blame] | 320 | #if defined(CONFIG_T1024RDB) |
Shengzhou Liu | 4991240 | 2014-11-24 17:11:56 +0800 | [diff] [blame] | 321 | #define CONFIG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80 |
Shengzhou Liu | 00d7e5b | 2015-03-27 15:48:34 +0800 | [diff] [blame] | 322 | #elif defined(CONFIG_T1023RDB) |
| 323 | #define CONFIG_SYS_NOR_CSOR (CSOR_NOR_ADM_SHIFT(4) | \ |
| 324 | CSOR_NAND_TRHZ_80 | CSOR_NOR_ADM_SHFT_MODE_EN) |
| 325 | #endif |
Shengzhou Liu | 4991240 | 2014-11-24 17:11:56 +0800 | [diff] [blame] | 326 | #define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ |
| 327 | FTIM0_NOR_TEADC(0x5) | \ |
| 328 | FTIM0_NOR_TEAHC(0x5)) |
| 329 | #define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ |
| 330 | FTIM1_NOR_TRAD_NOR(0x1A) |\ |
| 331 | FTIM1_NOR_TSEQRAD_NOR(0x13)) |
| 332 | #define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ |
| 333 | FTIM2_NOR_TCH(0x4) | \ |
| 334 | FTIM2_NOR_TWPH(0x0E) | \ |
| 335 | FTIM2_NOR_TWP(0x1c)) |
| 336 | #define CONFIG_SYS_NOR_FTIM3 0x0 |
| 337 | |
| 338 | #define CONFIG_SYS_FLASH_QUIET_TEST |
| 339 | #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ |
| 340 | |
| 341 | #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ |
| 342 | #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ |
| 343 | #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ |
| 344 | #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ |
| 345 | |
| 346 | #define CONFIG_SYS_FLASH_EMPTY_INFO |
| 347 | #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS} |
| 348 | |
Shengzhou Liu | 00d7e5b | 2015-03-27 15:48:34 +0800 | [diff] [blame] | 349 | #ifdef CONFIG_T1024RDB |
Shengzhou Liu | 4991240 | 2014-11-24 17:11:56 +0800 | [diff] [blame] | 350 | /* CPLD on IFC */ |
| 351 | #define CONFIG_SYS_CPLD_BASE 0xffdf0000 |
| 352 | #define CONFIG_SYS_CPLD_BASE_PHYS (0xf00000000ull | CONFIG_SYS_CPLD_BASE) |
| 353 | #define CONFIG_SYS_CSPR2_EXT (0xf) |
| 354 | #define CONFIG_SYS_CSPR2 (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE) \ |
| 355 | | CSPR_PORT_SIZE_8 \ |
| 356 | | CSPR_MSEL_GPCM \ |
| 357 | | CSPR_V) |
| 358 | #define CONFIG_SYS_AMASK2 IFC_AMASK(64*1024) |
| 359 | #define CONFIG_SYS_CSOR2 0x0 |
| 360 | |
| 361 | /* CPLD Timing parameters for IFC CS2 */ |
| 362 | #define CONFIG_SYS_CS2_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ |
| 363 | FTIM0_GPCM_TEADC(0x0e) | \ |
| 364 | FTIM0_GPCM_TEAHC(0x0e)) |
| 365 | #define CONFIG_SYS_CS2_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \ |
| 366 | FTIM1_GPCM_TRAD(0x1f)) |
| 367 | #define CONFIG_SYS_CS2_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ |
| 368 | FTIM2_GPCM_TCH(0x8) | \ |
| 369 | FTIM2_GPCM_TWP(0x1f)) |
| 370 | #define CONFIG_SYS_CS2_FTIM3 0x0 |
Shengzhou Liu | 00d7e5b | 2015-03-27 15:48:34 +0800 | [diff] [blame] | 371 | #endif |
Shengzhou Liu | 4991240 | 2014-11-24 17:11:56 +0800 | [diff] [blame] | 372 | |
| 373 | /* NAND Flash on IFC */ |
| 374 | #define CONFIG_NAND_FSL_IFC |
| 375 | #define CONFIG_SYS_NAND_BASE 0xff800000 |
| 376 | #ifdef CONFIG_PHYS_64BIT |
| 377 | #define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE) |
| 378 | #else |
| 379 | #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE |
| 380 | #endif |
| 381 | #define CONFIG_SYS_NAND_CSPR_EXT (0xf) |
| 382 | #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ |
| 383 | | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ |
| 384 | | CSPR_MSEL_NAND /* MSEL = NAND */ \ |
| 385 | | CSPR_V) |
| 386 | #define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) |
| 387 | |
Shengzhou Liu | 00d7e5b | 2015-03-27 15:48:34 +0800 | [diff] [blame] | 388 | #if defined(CONFIG_T1024RDB) |
Shengzhou Liu | 4991240 | 2014-11-24 17:11:56 +0800 | [diff] [blame] | 389 | #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ |
| 390 | | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ |
| 391 | | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ |
| 392 | | CSOR_NAND_RAL_3 /* RAL = 3Byes */ \ |
| 393 | | CSOR_NAND_PGS_4K /* Page Size = 4K */ \ |
| 394 | | CSOR_NAND_SPRZ_224 /* Spare size = 224 */ \ |
| 395 | | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ |
Shengzhou Liu | 00d7e5b | 2015-03-27 15:48:34 +0800 | [diff] [blame] | 396 | #define CONFIG_SYS_NAND_BLOCK_SIZE (512 * 1024) |
| 397 | #elif defined(CONFIG_T1023RDB) |
| 398 | #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_RAL_3 /* RAL 3Bytes */ \ |
| 399 | | CSOR_NAND_RAL_3 /* RAL 3Bytes */ \ |
| 400 | | CSOR_NAND_PGS_2K /* Page Size = 2K */ \ |
| 401 | | CSOR_NAND_SPRZ_128 /* Spare size = 128 */ \ |
| 402 | | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ |
| 403 | #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) |
| 404 | #endif |
Shengzhou Liu | 4991240 | 2014-11-24 17:11:56 +0800 | [diff] [blame] | 405 | |
| 406 | #define CONFIG_SYS_NAND_ONFI_DETECTION |
Shengzhou Liu | 4991240 | 2014-11-24 17:11:56 +0800 | [diff] [blame] | 407 | /* ONFI NAND Flash mode0 Timing Params */ |
| 408 | #define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \ |
| 409 | FTIM0_NAND_TWP(0x18) | \ |
| 410 | FTIM0_NAND_TWCHT(0x07) | \ |
| 411 | FTIM0_NAND_TWH(0x0a)) |
| 412 | #define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \ |
| 413 | FTIM1_NAND_TWBE(0x39) | \ |
| 414 | FTIM1_NAND_TRR(0x0e) | \ |
| 415 | FTIM1_NAND_TRP(0x18)) |
| 416 | #define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ |
| 417 | FTIM2_NAND_TREH(0x0a) | \ |
| 418 | FTIM2_NAND_TWHRE(0x1e)) |
| 419 | #define CONFIG_SYS_NAND_FTIM3 0x0 |
| 420 | |
| 421 | #define CONFIG_SYS_NAND_DDR_LAW 11 |
| 422 | #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } |
| 423 | #define CONFIG_SYS_MAX_NAND_DEVICE 1 |
Shengzhou Liu | 4991240 | 2014-11-24 17:11:56 +0800 | [diff] [blame] | 424 | #define CONFIG_CMD_NAND |
| 425 | |
Shengzhou Liu | 4991240 | 2014-11-24 17:11:56 +0800 | [diff] [blame] | 426 | #if defined(CONFIG_NAND) |
| 427 | #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT |
| 428 | #define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR |
| 429 | #define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK |
| 430 | #define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR |
| 431 | #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 |
| 432 | #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 |
| 433 | #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 |
| 434 | #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 |
| 435 | #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR0_CSPR_EXT |
| 436 | #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR0_CSPR |
| 437 | #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK |
| 438 | #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR |
| 439 | #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 |
| 440 | #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 |
| 441 | #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 |
| 442 | #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 |
| 443 | #else |
| 444 | #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT |
| 445 | #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR |
| 446 | #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK |
| 447 | #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR |
| 448 | #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 |
| 449 | #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 |
| 450 | #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 |
| 451 | #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 |
| 452 | #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NAND_CSPR_EXT |
| 453 | #define CONFIG_SYS_CSPR1 CONFIG_SYS_NAND_CSPR |
| 454 | #define CONFIG_SYS_AMASK1 CONFIG_SYS_NAND_AMASK |
| 455 | #define CONFIG_SYS_CSOR1 CONFIG_SYS_NAND_CSOR |
| 456 | #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NAND_FTIM0 |
| 457 | #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NAND_FTIM1 |
| 458 | #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NAND_FTIM2 |
| 459 | #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3 |
| 460 | #endif |
| 461 | |
| 462 | #ifdef CONFIG_SPL_BUILD |
| 463 | #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE |
| 464 | #else |
| 465 | #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE |
| 466 | #endif |
| 467 | |
| 468 | #if defined(CONFIG_RAMBOOT_PBL) |
| 469 | #define CONFIG_SYS_RAMBOOT |
| 470 | #endif |
| 471 | |
| 472 | #define CONFIG_BOARD_EARLY_INIT_R |
| 473 | #define CONFIG_MISC_INIT_R |
| 474 | |
| 475 | #define CONFIG_HWCONFIG |
| 476 | |
| 477 | /* define to use L1 as initial stack */ |
| 478 | #define CONFIG_L1_INIT_RAM |
| 479 | #define CONFIG_SYS_INIT_RAM_LOCK |
| 480 | #define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ |
| 481 | #ifdef CONFIG_PHYS_64BIT |
| 482 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf |
| 483 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe0ec000 |
| 484 | /* The assembler doesn't like typecast */ |
| 485 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ |
| 486 | ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ |
| 487 | CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) |
| 488 | #else |
| 489 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS 0xfe0ec000 /* Initial L1 address */ |
| 490 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 |
| 491 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS |
| 492 | #endif |
| 493 | #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 |
| 494 | |
| 495 | #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ |
| 496 | GENERATED_GBL_DATA_SIZE) |
| 497 | #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET |
| 498 | |
| 499 | #define CONFIG_SYS_MONITOR_LEN (768 * 1024) |
| 500 | #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) |
| 501 | |
| 502 | /* Serial Port */ |
| 503 | #define CONFIG_CONS_INDEX 1 |
| 504 | #define CONFIG_SYS_NS16550 |
| 505 | #define CONFIG_SYS_NS16550_SERIAL |
| 506 | #define CONFIG_SYS_NS16550_REG_SIZE 1 |
| 507 | #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) |
| 508 | |
| 509 | #define CONFIG_SYS_BAUDRATE_TABLE \ |
| 510 | {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} |
| 511 | |
| 512 | #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) |
| 513 | #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) |
| 514 | #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) |
| 515 | #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) |
| 516 | #define CONFIG_SYS_CONSOLE_IS_IN_ENV /* determine from environment */ |
| 517 | |
| 518 | /* Use the HUSH parser */ |
| 519 | #define CONFIG_SYS_HUSH_PARSER |
| 520 | #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " |
| 521 | |
| 522 | /* Video */ |
| 523 | #undef CONFIG_FSL_DIU_FB /* RDB doesn't support DIU */ |
| 524 | #ifdef CONFIG_FSL_DIU_FB |
| 525 | #define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_CCSRBAR + 0x180000) |
| 526 | #define CONFIG_VIDEO |
| 527 | #define CONFIG_CMD_BMP |
| 528 | #define CONFIG_CFB_CONSOLE |
| 529 | #define CONFIG_VIDEO_SW_CURSOR |
| 530 | #define CONFIG_VGA_AS_SINGLE_DEVICE |
| 531 | #define CONFIG_VIDEO_LOGO |
| 532 | #define CONFIG_VIDEO_BMP_LOGO |
| 533 | #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS |
| 534 | /* |
| 535 | * With CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS, flash I/O is really slow, so |
| 536 | * disable empty flash sector detection, which is I/O-intensive. |
| 537 | */ |
| 538 | #undef CONFIG_SYS_FLASH_EMPTY_INFO |
| 539 | #endif |
| 540 | |
| 541 | /* pass open firmware flat tree */ |
| 542 | #define CONFIG_OF_LIBFDT |
| 543 | #define CONFIG_OF_BOARD_SETUP |
| 544 | #define CONFIG_OF_STDOUT_VIA_ALIAS |
| 545 | |
| 546 | /* new uImage format support */ |
| 547 | #define CONFIG_FIT |
| 548 | #define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ |
| 549 | |
| 550 | /* I2C */ |
| 551 | #define CONFIG_SYS_I2C |
| 552 | #define CONFIG_SYS_I2C_FSL /* Use FSL common I2C driver */ |
| 553 | #define CONFIG_SYS_FSL_I2C_SPEED 50000 /* I2C speed in Hz */ |
| 554 | #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F |
| 555 | #define CONFIG_SYS_FSL_I2C2_SPEED 50000 /* I2C speed in Hz */ |
| 556 | #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F |
| 557 | #define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 |
| 558 | #define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100 |
| 559 | |
| 560 | #define I2C_MUX_PCA_ADDR 0x77 |
| 561 | #define I2C_MUX_PCA_ADDR_PRI 0x77 /* Primary Mux*/ |
| 562 | |
| 563 | |
| 564 | /* I2C bus multiplexer */ |
| 565 | #define I2C_MUX_CH_DEFAULT 0x8 |
| 566 | |
| 567 | /* |
| 568 | * RTC configuration |
| 569 | */ |
| 570 | #define RTC |
| 571 | #define CONFIG_RTC_DS1337 1 |
| 572 | #define CONFIG_SYS_I2C_RTC_ADDR 0x68 |
| 573 | |
| 574 | /* |
| 575 | * eSPI - Enhanced SPI |
| 576 | */ |
| 577 | #define CONFIG_FSL_ESPI |
| 578 | #define CONFIG_SPI_FLASH |
Shengzhou Liu | 00d7e5b | 2015-03-27 15:48:34 +0800 | [diff] [blame] | 579 | #if defined(CONFIG_T1024RDB) |
Shengzhou Liu | 4991240 | 2014-11-24 17:11:56 +0800 | [diff] [blame] | 580 | #define CONFIG_SPI_FLASH_STMICRO |
Shengzhou Liu | 00d7e5b | 2015-03-27 15:48:34 +0800 | [diff] [blame] | 581 | #elif defined(CONFIG_T1023RDB) |
| 582 | #define CONFIG_SPI_FLASH_SPANSION |
| 583 | #endif |
Shengzhou Liu | 4991240 | 2014-11-24 17:11:56 +0800 | [diff] [blame] | 584 | #define CONFIG_CMD_SF |
| 585 | #define CONFIG_SPI_FLASH_BAR |
| 586 | #define CONFIG_SF_DEFAULT_SPEED 10000000 |
| 587 | #define CONFIG_SF_DEFAULT_MODE 0 |
| 588 | |
| 589 | /* |
| 590 | * General PCIe |
| 591 | * Memory space is mapped 1-1, but I/O space must start from 0. |
| 592 | */ |
| 593 | #define CONFIG_PCI /* Enable PCI/PCIE */ |
| 594 | #define CONFIG_PCIE1 /* PCIE controler 1 */ |
| 595 | #define CONFIG_PCIE2 /* PCIE controler 2 */ |
| 596 | #define CONFIG_PCIE3 /* PCIE controler 3 */ |
| 597 | #ifdef CONFIG_PPC_T1040 |
| 598 | #define CONFIG_PCIE4 /* PCIE controler 4 */ |
| 599 | #endif |
| 600 | #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ |
| 601 | #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ |
| 602 | #define CONFIG_PCI_INDIRECT_BRIDGE |
| 603 | |
| 604 | #ifdef CONFIG_PCI |
| 605 | /* controller 1, direct to uli, tgtid 3, Base address 20000 */ |
| 606 | #ifdef CONFIG_PCIE1 |
| 607 | #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 |
| 608 | #ifdef CONFIG_PHYS_64BIT |
| 609 | #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 |
| 610 | #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull |
| 611 | #else |
| 612 | #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 |
| 613 | #define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000 |
| 614 | #endif |
| 615 | #define CONFIG_SYS_PCIE1_MEM_SIZE 0x10000000 /* 256M */ |
| 616 | #define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 |
| 617 | #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 |
| 618 | #ifdef CONFIG_PHYS_64BIT |
| 619 | #define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull |
| 620 | #else |
| 621 | #define CONFIG_SYS_PCIE1_IO_PHYS 0xf8000000 |
| 622 | #endif |
| 623 | #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ |
| 624 | #endif |
| 625 | |
| 626 | /* controller 2, Slot 2, tgtid 2, Base address 201000 */ |
| 627 | #ifdef CONFIG_PCIE2 |
| 628 | #define CONFIG_SYS_PCIE2_MEM_VIRT 0x90000000 |
| 629 | #ifdef CONFIG_PHYS_64BIT |
| 630 | #define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 |
| 631 | #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc10000000ull |
| 632 | #else |
| 633 | #define CONFIG_SYS_PCIE2_MEM_BUS 0x90000000 |
| 634 | #define CONFIG_SYS_PCIE2_MEM_PHYS 0x90000000 |
| 635 | #endif |
| 636 | #define CONFIG_SYS_PCIE2_MEM_SIZE 0x10000000 /* 256M */ |
| 637 | #define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000 |
| 638 | #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 |
| 639 | #ifdef CONFIG_PHYS_64BIT |
| 640 | #define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull |
| 641 | #else |
| 642 | #define CONFIG_SYS_PCIE2_IO_PHYS 0xf8010000 |
| 643 | #endif |
| 644 | #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ |
| 645 | #endif |
| 646 | |
| 647 | /* controller 3, Slot 1, tgtid 1, Base address 202000 */ |
| 648 | #ifdef CONFIG_PCIE3 |
| 649 | #define CONFIG_SYS_PCIE3_MEM_VIRT 0xa0000000 |
| 650 | #ifdef CONFIG_PHYS_64BIT |
| 651 | #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 |
| 652 | #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc20000000ull |
| 653 | #else |
| 654 | #define CONFIG_SYS_PCIE3_MEM_BUS 0xa0000000 |
| 655 | #define CONFIG_SYS_PCIE3_MEM_PHYS 0xa0000000 |
| 656 | #endif |
| 657 | #define CONFIG_SYS_PCIE3_MEM_SIZE 0x10000000 /* 256M */ |
| 658 | #define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000 |
| 659 | #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 |
| 660 | #ifdef CONFIG_PHYS_64BIT |
| 661 | #define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull |
| 662 | #else |
| 663 | #define CONFIG_SYS_PCIE3_IO_PHYS 0xf8020000 |
| 664 | #endif |
| 665 | #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ |
| 666 | #endif |
| 667 | |
| 668 | /* controller 4, Base address 203000, to be removed */ |
| 669 | #ifdef CONFIG_PCIE4 |
| 670 | #define CONFIG_SYS_PCIE4_MEM_VIRT 0xb0000000 |
| 671 | #ifdef CONFIG_PHYS_64BIT |
| 672 | #define CONFIG_SYS_PCIE4_MEM_BUS 0xe0000000 |
| 673 | #define CONFIG_SYS_PCIE4_MEM_PHYS 0xc30000000ull |
| 674 | #else |
| 675 | #define CONFIG_SYS_PCIE4_MEM_BUS 0xb0000000 |
| 676 | #define CONFIG_SYS_PCIE4_MEM_PHYS 0xb0000000 |
| 677 | #endif |
| 678 | #define CONFIG_SYS_PCIE4_MEM_SIZE 0x10000000 /* 256M */ |
| 679 | #define CONFIG_SYS_PCIE4_IO_VIRT 0xf8030000 |
| 680 | #define CONFIG_SYS_PCIE4_IO_BUS 0x00000000 |
| 681 | #ifdef CONFIG_PHYS_64BIT |
| 682 | #define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull |
| 683 | #else |
| 684 | #define CONFIG_SYS_PCIE4_IO_PHYS 0xf8030000 |
| 685 | #endif |
| 686 | #define CONFIG_SYS_PCIE4_IO_SIZE 0x00010000 /* 64k */ |
| 687 | #endif |
| 688 | |
| 689 | #define CONFIG_PCI_PNP /* do pci plug-and-play */ |
| 690 | #define CONFIG_E1000 |
| 691 | #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ |
| 692 | #define CONFIG_DOS_PARTITION |
| 693 | #endif /* CONFIG_PCI */ |
| 694 | |
| 695 | /* |
| 696 | * USB |
| 697 | */ |
| 698 | #define CONFIG_HAS_FSL_DR_USB |
| 699 | |
| 700 | #ifdef CONFIG_HAS_FSL_DR_USB |
| 701 | #define CONFIG_USB_EHCI |
| 702 | #define CONFIG_CMD_USB |
| 703 | #define CONFIG_USB_STORAGE |
| 704 | #define CONFIG_USB_EHCI_FSL |
| 705 | #define CONFIG_EHCI_HCD_INIT_AFTER_RESET |
| 706 | #define CONFIG_CMD_EXT2 |
| 707 | #endif |
| 708 | |
| 709 | /* |
| 710 | * SDHC |
| 711 | */ |
| 712 | #define CONFIG_MMC |
| 713 | #ifdef CONFIG_MMC |
| 714 | #define CONFIG_FSL_ESDHC |
| 715 | #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR |
| 716 | #define CONFIG_CMD_MMC |
| 717 | #define CONFIG_GENERIC_MMC |
| 718 | #define CONFIG_CMD_EXT2 |
| 719 | #define CONFIG_CMD_FAT |
| 720 | #define CONFIG_DOS_PARTITION |
| 721 | #endif |
| 722 | |
| 723 | /* Qman/Bman */ |
| 724 | #ifndef CONFIG_NOBQFMAN |
| 725 | #define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ |
Jeffrey Ladouceur | f9c3974 | 2014-12-03 18:08:43 -0500 | [diff] [blame] | 726 | #define CONFIG_SYS_BMAN_NUM_PORTALS 10 |
Shengzhou Liu | 4991240 | 2014-11-24 17:11:56 +0800 | [diff] [blame] | 727 | #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 |
| 728 | #ifdef CONFIG_PHYS_64BIT |
| 729 | #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull |
| 730 | #else |
| 731 | #define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE |
| 732 | #endif |
| 733 | #define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 |
Jeffrey Ladouceur | ff2c646 | 2014-12-08 14:54:01 -0500 | [diff] [blame] | 734 | #define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000 |
| 735 | #define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000 |
| 736 | #define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE |
| 737 | #define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) |
| 738 | #define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \ |
| 739 | CONFIG_SYS_BMAN_CENA_SIZE) |
| 740 | #define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) |
| 741 | #define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08 |
Jeffrey Ladouceur | f9c3974 | 2014-12-03 18:08:43 -0500 | [diff] [blame] | 742 | #define CONFIG_SYS_QMAN_NUM_PORTALS 10 |
Shengzhou Liu | 4991240 | 2014-11-24 17:11:56 +0800 | [diff] [blame] | 743 | #define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 |
| 744 | #ifdef CONFIG_PHYS_64BIT |
| 745 | #define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull |
| 746 | #else |
| 747 | #define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE |
| 748 | #endif |
| 749 | #define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 |
Jeffrey Ladouceur | ff2c646 | 2014-12-08 14:54:01 -0500 | [diff] [blame] | 750 | #define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000 |
| 751 | #define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000 |
| 752 | #define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE |
| 753 | #define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) |
| 754 | #define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \ |
| 755 | CONFIG_SYS_QMAN_CENA_SIZE) |
| 756 | #define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) |
| 757 | #define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08 |
Shengzhou Liu | 4991240 | 2014-11-24 17:11:56 +0800 | [diff] [blame] | 758 | |
| 759 | #define CONFIG_SYS_DPAA_FMAN |
| 760 | |
| 761 | #define CONFIG_QE |
| 762 | #define CONFIG_U_QE |
| 763 | /* Default address of microcode for the Linux FMan driver */ |
| 764 | #if defined(CONFIG_SPIFLASH) |
| 765 | /* |
| 766 | * env is stored at 0x100000, sector size is 0x10000, ucode is stored after |
| 767 | * env, so we got 0x110000. |
| 768 | */ |
| 769 | #define CONFIG_SYS_QE_FW_IN_SPIFLASH |
| 770 | #define CONFIG_SYS_FMAN_FW_ADDR 0x110000 |
| 771 | #define CONFIG_SYS_QE_FW_ADDR 0x130000 |
| 772 | #elif defined(CONFIG_SDCARD) |
| 773 | /* |
| 774 | * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is |
| 775 | * about 1MB (2048 blocks), Env is stored after the image, and the env size is |
| 776 | * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080(0x820). |
| 777 | */ |
| 778 | #define CONFIG_SYS_QE_FMAN_FW_IN_MMC |
| 779 | #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820) |
| 780 | #define CONFIG_SYS_QE_FW_ADDR (512 * 0x920) |
| 781 | #elif defined(CONFIG_NAND) |
| 782 | #define CONFIG_SYS_QE_FMAN_FW_IN_NAND |
Shengzhou Liu | 00d7e5b | 2015-03-27 15:48:34 +0800 | [diff] [blame] | 783 | #if defined(CONFIG_T1024RDB) |
Shengzhou Liu | 4991240 | 2014-11-24 17:11:56 +0800 | [diff] [blame] | 784 | #define CONFIG_SYS_FMAN_FW_ADDR (3 * CONFIG_SYS_NAND_BLOCK_SIZE) |
| 785 | #define CONFIG_SYS_QE_FW_ADDR (4 * CONFIG_SYS_NAND_BLOCK_SIZE) |
Shengzhou Liu | 00d7e5b | 2015-03-27 15:48:34 +0800 | [diff] [blame] | 786 | #elif defined(CONFIG_T1023RDB) |
| 787 | #define CONFIG_SYS_FMAN_FW_ADDR (11 * CONFIG_SYS_NAND_BLOCK_SIZE) |
| 788 | #define CONFIG_SYS_QE_FW_ADDR (12 * CONFIG_SYS_NAND_BLOCK_SIZE) |
| 789 | #endif |
Shengzhou Liu | 4991240 | 2014-11-24 17:11:56 +0800 | [diff] [blame] | 790 | #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) |
| 791 | /* |
| 792 | * Slave has no ucode locally, it can fetch this from remote. When implementing |
| 793 | * in two corenet boards, slave's ucode could be stored in master's memory |
| 794 | * space, the address can be mapped from slave TLB->slave LAW-> |
| 795 | * slave SRIO or PCIE outbound window->master inbound window-> |
| 796 | * master LAW->the ucode address in master's memory space. |
| 797 | */ |
| 798 | #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE |
| 799 | #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000 |
| 800 | #else |
| 801 | #define CONFIG_SYS_QE_FMAN_FW_IN_NOR |
| 802 | #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 |
| 803 | #define CONFIG_SYS_QE_FW_ADDR 0xEFE00000 |
| 804 | #endif |
| 805 | #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 |
| 806 | #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) |
| 807 | #endif /* CONFIG_NOBQFMAN */ |
| 808 | |
| 809 | #ifdef CONFIG_SYS_DPAA_FMAN |
| 810 | #define CONFIG_FMAN_ENET |
| 811 | #define CONFIG_PHYLIB_10G |
| 812 | #define CONFIG_PHY_REALTEK |
Shengzhou Liu | ccc57ef | 2014-12-17 16:51:08 +0800 | [diff] [blame] | 813 | #define CONFIG_PHY_AQUANTIA |
Shengzhou Liu | 00d7e5b | 2015-03-27 15:48:34 +0800 | [diff] [blame] | 814 | #if defined(CONFIG_T1024RDB) |
Shengzhou Liu | 4991240 | 2014-11-24 17:11:56 +0800 | [diff] [blame] | 815 | #define RGMII_PHY1_ADDR 0x2 |
| 816 | #define RGMII_PHY2_ADDR 0x6 |
Shengzhou Liu | 00d7e5b | 2015-03-27 15:48:34 +0800 | [diff] [blame] | 817 | #define SGMII_AQR_PHY_ADDR 0x2 |
Shengzhou Liu | 4991240 | 2014-11-24 17:11:56 +0800 | [diff] [blame] | 818 | #define FM1_10GEC1_PHY_ADDR 0x1 |
Shengzhou Liu | 00d7e5b | 2015-03-27 15:48:34 +0800 | [diff] [blame] | 819 | #elif defined(CONFIG_T1023RDB) |
| 820 | #define RGMII_PHY1_ADDR 0x1 |
| 821 | #define SGMII_RTK_PHY_ADDR 0x3 |
| 822 | #define SGMII_AQR_PHY_ADDR 0x2 |
| 823 | #endif |
Shengzhou Liu | 4991240 | 2014-11-24 17:11:56 +0800 | [diff] [blame] | 824 | #endif |
| 825 | |
| 826 | #ifdef CONFIG_FMAN_ENET |
| 827 | #define CONFIG_MII /* MII PHY management */ |
| 828 | #define CONFIG_ETHPRIME "FM1@DTSEC4" |
| 829 | #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ |
| 830 | #endif |
| 831 | |
| 832 | /* |
| 833 | * Dynamic MTD Partition support with mtdparts |
| 834 | */ |
| 835 | #ifndef CONFIG_SYS_NO_FLASH |
| 836 | #define CONFIG_MTD_DEVICE |
| 837 | #define CONFIG_MTD_PARTITIONS |
| 838 | #define CONFIG_CMD_MTDPARTS |
| 839 | #define CONFIG_FLASH_CFI_MTD |
| 840 | #define MTDIDS_DEFAULT "nor0=fe8000000.nor,nand0=fff800000.flash," \ |
| 841 | "spi0=spife110000.1" |
| 842 | #define MTDPARTS_DEFAULT "mtdparts=fe8000000.nor:1m(uboot),5m(kernel)," \ |
| 843 | "128k(dtb),96m(fs),-(user);fff800000.flash:1m(uboot)," \ |
| 844 | "5m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:" \ |
| 845 | "1m(uboot),5m(kernel),128k(dtb),-(user)" |
| 846 | #endif |
| 847 | |
| 848 | /* |
| 849 | * Environment |
| 850 | */ |
| 851 | #define CONFIG_LOADS_ECHO /* echo on for serial download */ |
| 852 | #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ |
| 853 | |
| 854 | /* |
| 855 | * Command line configuration. |
| 856 | */ |
| 857 | #include <config_cmd_default.h> |
| 858 | |
| 859 | #define CONFIG_CMD_DATE |
| 860 | #define CONFIG_CMD_DHCP |
| 861 | #define CONFIG_CMD_EEPROM |
| 862 | #define CONFIG_CMD_ELF |
| 863 | #define CONFIG_CMD_ERRATA |
| 864 | #define CONFIG_CMD_GREPENV |
| 865 | #define CONFIG_CMD_IRQ |
| 866 | #define CONFIG_CMD_I2C |
| 867 | #define CONFIG_CMD_MII |
| 868 | #define CONFIG_CMD_PING |
| 869 | #define CONFIG_CMD_ECHO |
| 870 | #define CONFIG_CMD_REGINFO |
| 871 | #define CONFIG_CMD_SETEXPR |
| 872 | #define CONFIG_CMD_BDI |
| 873 | |
| 874 | #ifdef CONFIG_PCI |
| 875 | #define CONFIG_CMD_PCI |
| 876 | #define CONFIG_CMD_NET |
| 877 | #endif |
| 878 | |
| 879 | /* |
| 880 | * Miscellaneous configurable options |
| 881 | */ |
| 882 | #define CONFIG_SYS_LONGHELP /* undef to save memory */ |
| 883 | #define CONFIG_CMDLINE_EDITING /* Command-line editing */ |
| 884 | #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ |
| 885 | #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ |
| 886 | #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ |
| 887 | #ifdef CONFIG_CMD_KGDB |
| 888 | #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ |
| 889 | #else |
| 890 | #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ |
| 891 | #endif |
| 892 | #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) |
| 893 | #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ |
| 894 | #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ |
| 895 | |
| 896 | /* |
| 897 | * For booting Linux, the board info and command line data |
| 898 | * have to be in the first 64 MB of memory, since this is |
| 899 | * the maximum mapped by the Linux kernel during initialization. |
| 900 | */ |
| 901 | #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/ |
| 902 | #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ |
| 903 | |
| 904 | #ifdef CONFIG_CMD_KGDB |
| 905 | #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ |
| 906 | #endif |
| 907 | |
| 908 | /* |
| 909 | * Environment Configuration |
| 910 | */ |
| 911 | #define CONFIG_ROOTPATH "/opt/nfsroot" |
| 912 | #define CONFIG_BOOTFILE "uImage" |
Shengzhou Liu | 00d7e5b | 2015-03-27 15:48:34 +0800 | [diff] [blame] | 913 | #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ |
Shengzhou Liu | 4991240 | 2014-11-24 17:11:56 +0800 | [diff] [blame] | 914 | #define CONFIG_LOADADDR 1000000 /* default location for tftp, bootm */ |
| 915 | #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ |
| 916 | #define CONFIG_BAUDRATE 115200 |
| 917 | #define __USB_PHY_TYPE utmi |
| 918 | |
| 919 | #ifdef CONFIG_PPC_T1024 |
Shengzhou Liu | 00d7e5b | 2015-03-27 15:48:34 +0800 | [diff] [blame] | 920 | #define CONFIG_BOARDNAME t1024rdb |
| 921 | #define BANK_INTLV cs0_cs1 |
Shengzhou Liu | 4991240 | 2014-11-24 17:11:56 +0800 | [diff] [blame] | 922 | #else |
Shengzhou Liu | 00d7e5b | 2015-03-27 15:48:34 +0800 | [diff] [blame] | 923 | #define CONFIG_BOARDNAME t1023rdb |
| 924 | #define BANK_INTLV null |
Shengzhou Liu | 4991240 | 2014-11-24 17:11:56 +0800 | [diff] [blame] | 925 | #endif |
| 926 | |
| 927 | #define CONFIG_EXTRA_ENV_SETTINGS \ |
| 928 | "hwconfig=fsl_ddr:ctlr_intlv=cacheline," \ |
Shengzhou Liu | 00d7e5b | 2015-03-27 15:48:34 +0800 | [diff] [blame] | 929 | "bank_intlv=" __stringify(BANK_INTLV) "\0" \ |
Shengzhou Liu | 4991240 | 2014-11-24 17:11:56 +0800 | [diff] [blame] | 930 | "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0" \ |
| 931 | "ramdiskfile=" __stringify(CONFIG_BOARDNAME) "/ramdisk.uboot\0" \ |
| 932 | "fdtfile=" __stringify(CONFIG_BOARDNAME) "/" \ |
| 933 | __stringify(CONFIG_BOARDNAME) ".dtb\0" \ |
| 934 | "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ |
| 935 | "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ |
| 936 | "bootargs=root=/dev/ram rw console=ttyS0,115200\0" \ |
| 937 | "netdev=eth0\0" \ |
| 938 | "tftpflash=tftpboot $loadaddr $uboot && " \ |
| 939 | "protect off $ubootaddr +$filesize && " \ |
| 940 | "erase $ubootaddr +$filesize && " \ |
| 941 | "cp.b $loadaddr $ubootaddr $filesize && " \ |
| 942 | "protect on $ubootaddr +$filesize && " \ |
| 943 | "cmp.b $loadaddr $ubootaddr $filesize\0" \ |
| 944 | "consoledev=ttyS0\0" \ |
| 945 | "ramdiskaddr=2000000\0" \ |
| 946 | "fdtaddr=c00000\0" \ |
| 947 | "bdev=sda3\0" |
| 948 | |
| 949 | #define CONFIG_LINUX \ |
| 950 | "setenv bootargs root=/dev/ram rw " \ |
| 951 | "console=$consoledev,$baudrate $othbootargs;" \ |
| 952 | "setenv ramdiskaddr 0x02000000;" \ |
| 953 | "setenv fdtaddr 0x00c00000;" \ |
| 954 | "setenv loadaddr 0x1000000;" \ |
| 955 | "bootm $loadaddr $ramdiskaddr $fdtaddr" |
| 956 | |
| 957 | |
| 958 | #define CONFIG_NFSBOOTCOMMAND \ |
| 959 | "setenv bootargs root=/dev/nfs rw " \ |
| 960 | "nfsroot=$serverip:$rootpath " \ |
| 961 | "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ |
| 962 | "console=$consoledev,$baudrate $othbootargs;" \ |
| 963 | "tftp $loadaddr $bootfile;" \ |
| 964 | "tftp $fdtaddr $fdtfile;" \ |
| 965 | "bootm $loadaddr - $fdtaddr" |
| 966 | |
| 967 | #define CONFIG_BOOTCOMMAND CONFIG_LINUX |
| 968 | |
| 969 | #ifdef CONFIG_SECURE_BOOT |
| 970 | #include <asm/fsl_secure_boot.h> |
| 971 | #endif |
| 972 | |
| 973 | #endif /* __T1024RDB_H */ |