blob: e45a3b2658a31dce190c436fb659b7db278244fb [file] [log] [blame]
Tom Rini8b0c8a12018-05-06 18:27:01 -04001// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
Patrick Delaunay939d5362018-03-12 10:46:11 +01002/*
3 * Copyright (C) 2018, STMicroelectronics - All Rights Reserved
Patrick Delaunay939d5362018-03-12 10:46:11 +01004 */
5
6#include <common.h>
7#include <clk.h>
8#include <dm.h>
9#include <ram.h>
10#include <regmap.h>
11#include <syscon.h>
12#include <asm/io.h>
13#include "stm32mp1_ddr.h"
14
Patrick Delaunay939d5362018-03-12 10:46:11 +010015static const char *const clkname[] = {
16 "ddrc1",
17 "ddrc2",
18 "ddrcapb",
19 "ddrphycapb",
20 "ddrphyc" /* LAST clock => used for get_rate() */
21};
22
23int stm32mp1_ddr_clk_enable(struct ddr_info *priv, uint16_t mem_speed)
24{
25 unsigned long ddrphy_clk;
26 unsigned long ddr_clk;
27 struct clk clk;
28 int ret;
29 int idx;
30
31 for (idx = 0; idx < ARRAY_SIZE(clkname); idx++) {
32 ret = clk_get_by_name(priv->dev, clkname[idx], &clk);
33
34 if (!ret)
35 ret = clk_enable(&clk);
36
37 if (ret) {
38 printf("error for %s : %d\n", clkname[idx], ret);
39 return ret;
40 }
41 }
42
43 priv->clk = clk;
44 ddrphy_clk = clk_get_rate(&priv->clk);
45
46 debug("DDR: mem_speed (%d MHz), RCC %d MHz\n",
47 mem_speed, (u32)(ddrphy_clk / 1000 / 1000));
48 /* max 10% frequency delta */
49 ddr_clk = abs(ddrphy_clk - mem_speed * 1000 * 1000);
50 if (ddr_clk > (mem_speed * 1000 * 100)) {
51 pr_err("DDR expected freq %d MHz, current is %d MHz\n",
52 mem_speed, (u32)(ddrphy_clk / 1000 / 1000));
53 return -EINVAL;
54 }
55
56 return 0;
57}
58
59static __maybe_unused int stm32mp1_ddr_setup(struct udevice *dev)
60{
61 struct ddr_info *priv = dev_get_priv(dev);
62 int ret, idx;
63 struct clk axidcg;
64 struct stm32mp1_ddr_config config;
65
66#define PARAM(x, y) \
67 { x,\
68 offsetof(struct stm32mp1_ddr_config, y),\
69 sizeof(config.y) / sizeof(u32)}
70
71#define CTL_PARAM(x) PARAM("st,ctl-"#x, c_##x)
72#define PHY_PARAM(x) PARAM("st,phy-"#x, p_##x)
73
74 const struct {
75 const char *name; /* name in DT */
76 const u32 offset; /* offset in config struct */
77 const u32 size; /* size of parameters */
78 } param[] = {
79 CTL_PARAM(reg),
80 CTL_PARAM(timing),
81 CTL_PARAM(map),
82 CTL_PARAM(perf),
83 PHY_PARAM(reg),
84 PHY_PARAM(timing),
85 PHY_PARAM(cal)
86 };
87
88 config.info.speed = dev_read_u32_default(dev, "st,mem-speed", 0);
89 config.info.size = dev_read_u32_default(dev, "st,mem-size", 0);
90 config.info.name = dev_read_string(dev, "st,mem-name");
91 if (!config.info.name) {
92 debug("%s: no st,mem-name\n", __func__);
93 return -EINVAL;
94 }
95 printf("RAM: %s\n", config.info.name);
96
97 for (idx = 0; idx < ARRAY_SIZE(param); idx++) {
98 ret = dev_read_u32_array(dev, param[idx].name,
99 (void *)((u32)&config +
100 param[idx].offset),
101 param[idx].size);
102 debug("%s: %s[0x%x] = %d\n", __func__,
103 param[idx].name, param[idx].size, ret);
104 if (ret) {
105 pr_err("%s: Cannot read %s\n",
106 __func__, param[idx].name);
107 return -EINVAL;
108 }
109 }
110
111 ret = clk_get_by_name(dev, "axidcg", &axidcg);
112 if (ret) {
113 debug("%s: Cannot found axidcg\n", __func__);
114 return -EINVAL;
115 }
116 clk_disable(&axidcg); /* disable clock gating during init */
117
118 stm32mp1_ddr_init(priv, &config);
119
120 clk_enable(&axidcg); /* enable clock gating */
121
122 /* check size */
123 debug("%s : get_ram_size(%x, %x)\n", __func__,
124 (u32)priv->info.base, (u32)STM32_DDR_SIZE);
125
126 priv->info.size = get_ram_size((long *)priv->info.base,
127 STM32_DDR_SIZE);
128
129 debug("%s : %x\n", __func__, (u32)priv->info.size);
130
131 /* check memory access for all memory */
132 if (config.info.size != priv->info.size) {
133 printf("DDR invalid size : 0x%x, expected 0x%x\n",
134 priv->info.size, config.info.size);
135 return -EINVAL;
136 }
137 return 0;
138}
139
140static int stm32mp1_ddr_probe(struct udevice *dev)
141{
142 struct ddr_info *priv = dev_get_priv(dev);
143 struct regmap *map;
144 int ret;
145
146 debug("STM32MP1 DDR probe\n");
147 priv->dev = dev;
148
Masahiro Yamadae4873e32018-04-19 12:14:03 +0900149 ret = regmap_init_mem(dev_ofnode(dev), &map);
Patrick Delaunay939d5362018-03-12 10:46:11 +0100150 if (ret)
151 return ret;
152
153 priv->ctl = regmap_get_range(map, 0);
154 priv->phy = regmap_get_range(map, 1);
155
156 priv->rcc = STM32_RCC_BASE;
157
158 priv->info.base = STM32_DDR_BASE;
159
Patrick Delaunay5d061412019-02-12 11:44:39 +0100160#if !defined(CONFIG_STM32MP1_TRUSTED) && \
161 (!defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD))
Patrick Delaunay939d5362018-03-12 10:46:11 +0100162 priv->info.size = 0;
163 return stm32mp1_ddr_setup(dev);
164#else
165 priv->info.size = dev_read_u32_default(dev, "st,mem-size", 0);
166 return 0;
167#endif
168}
169
170static int stm32mp1_ddr_get_info(struct udevice *dev, struct ram_info *info)
171{
172 struct ddr_info *priv = dev_get_priv(dev);
173
174 *info = priv->info;
175
176 return 0;
177}
178
179static struct ram_ops stm32mp1_ddr_ops = {
180 .get_info = stm32mp1_ddr_get_info,
181};
182
183static const struct udevice_id stm32mp1_ddr_ids[] = {
184 { .compatible = "st,stm32mp1-ddr" },
185 { }
186};
187
188U_BOOT_DRIVER(ddr_stm32mp1) = {
189 .name = "stm32mp1_ddr",
190 .id = UCLASS_RAM,
191 .of_match = stm32mp1_ddr_ids,
192 .ops = &stm32mp1_ddr_ops,
193 .probe = stm32mp1_ddr_probe,
194 .priv_auto_alloc_size = sizeof(struct ddr_info),
195};