| Tom Rini | 10e4779 | 2018-05-06 17:58:06 -0400 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0+ |
| Álvaro Fernández Rojas | 75d4cf2 | 2018-01-20 14:16:55 +0100 | [diff] [blame] | 2 | /* |
| 3 | * Copyright (C) 2017 Álvaro Fernández Rojas <noltari@gmail.com> |
| Álvaro Fernández Rojas | 75d4cf2 | 2018-01-20 14:16:55 +0100 | [diff] [blame] | 4 | */ |
| 5 | |
| 6 | #include <dt-bindings/clock/bcm6368-clock.h> |
| 7 | #include <dt-bindings/gpio/gpio.h> |
| 8 | #include <dt-bindings/reset/bcm6368-reset.h> |
| 9 | #include "skeleton.dtsi" |
| 10 | |
| 11 | / { |
| 12 | compatible = "brcm,bcm6368"; |
| 13 | |
| 14 | aliases { |
| 15 | spi0 = &spi; |
| 16 | }; |
| 17 | |
| 18 | cpus { |
| 19 | reg = <0x10000000 0x4>; |
| 20 | #address-cells = <1>; |
| 21 | #size-cells = <0>; |
| 22 | u-boot,dm-pre-reloc; |
| 23 | |
| 24 | cpu@0 { |
| 25 | compatible = "brcm,bcm6368-cpu", "mips,mips4Kc"; |
| 26 | device_type = "cpu"; |
| 27 | reg = <0>; |
| 28 | u-boot,dm-pre-reloc; |
| 29 | }; |
| 30 | |
| 31 | cpu@1 { |
| 32 | compatible = "brcm,bcm6368-cpu", "mips,mips4Kc"; |
| 33 | device_type = "cpu"; |
| 34 | reg = <1>; |
| 35 | u-boot,dm-pre-reloc; |
| 36 | }; |
| 37 | }; |
| 38 | |
| 39 | clocks { |
| 40 | compatible = "simple-bus"; |
| 41 | #address-cells = <1>; |
| 42 | #size-cells = <1>; |
| 43 | u-boot,dm-pre-reloc; |
| 44 | |
| 45 | periph_osc: periph-osc { |
| 46 | compatible = "fixed-clock"; |
| 47 | #clock-cells = <0>; |
| 48 | clock-frequency = <50000000>; |
| 49 | u-boot,dm-pre-reloc; |
| 50 | }; |
| 51 | |
| 52 | periph_clk: periph-clk { |
| 53 | compatible = "brcm,bcm6345-clk"; |
| 54 | reg = <0x10000004 0x4>; |
| 55 | #clock-cells = <1>; |
| 56 | }; |
| 57 | }; |
| 58 | |
| 59 | pflash: nor@18000000 { |
| 60 | compatible = "cfi-flash"; |
| 61 | reg = <0x18000000 0x2000000>; |
| 62 | bank-width = <2>; |
| 63 | #address-cells = <1>; |
| 64 | #size-cells = <1>; |
| 65 | |
| 66 | status = "disabled"; |
| 67 | }; |
| 68 | |
| 69 | ubus { |
| 70 | compatible = "simple-bus"; |
| 71 | #address-cells = <1>; |
| 72 | #size-cells = <1>; |
| 73 | u-boot,dm-pre-reloc; |
| 74 | |
| 75 | pll_cntl: syscon@10000008 { |
| 76 | compatible = "syscon"; |
| 77 | reg = <0x10000008 0x4>; |
| 78 | }; |
| 79 | |
| 80 | syscon-reboot { |
| 81 | compatible = "syscon-reboot"; |
| 82 | regmap = <&pll_cntl>; |
| 83 | offset = <0x0>; |
| 84 | mask = <0x1>; |
| 85 | }; |
| 86 | |
| 87 | periph_rst: reset-controller@10000010 { |
| 88 | compatible = "brcm,bcm6345-reset"; |
| 89 | reg = <0x10000010 0x4>; |
| 90 | #reset-cells = <1>; |
| 91 | }; |
| 92 | |
| 93 | wdt: watchdog@1000005c { |
| 94 | compatible = "brcm,bcm6345-wdt"; |
| 95 | reg = <0x1000005c 0xc>; |
| 96 | clocks = <&periph_osc>; |
| 97 | }; |
| 98 | |
| 99 | wdt-reboot { |
| 100 | compatible = "wdt-reboot"; |
| 101 | wdt = <&wdt>; |
| 102 | }; |
| 103 | |
| 104 | gpio1: gpio-controller@10000080 { |
| 105 | compatible = "brcm,bcm6345-gpio"; |
| 106 | reg = <0x10000080 0x4>, <0x10000088 0x4>; |
| 107 | gpio-controller; |
| 108 | #gpio-cells = <2>; |
| 109 | ngpios = <6>; |
| 110 | |
| 111 | status = "disabled"; |
| 112 | }; |
| 113 | |
| 114 | gpio0: gpio-controller@10000084 { |
| 115 | compatible = "brcm,bcm6345-gpio"; |
| 116 | reg = <0x10000084 0x4>, <0x1000008c 0x4>; |
| 117 | gpio-controller; |
| 118 | #gpio-cells = <2>; |
| 119 | |
| 120 | status = "disabled"; |
| 121 | }; |
| 122 | |
| 123 | leds: led-controller@100000d0 { |
| 124 | compatible = "brcm,bcm6358-leds"; |
| 125 | reg = <0x100000d0 0x8>; |
| 126 | #address-cells = <1>; |
| 127 | #size-cells = <0>; |
| 128 | |
| 129 | status = "disabled"; |
| 130 | }; |
| 131 | |
| 132 | uart0: serial@10000100 { |
| 133 | compatible = "brcm,bcm6345-uart"; |
| 134 | reg = <0x10000100 0x18>; |
| 135 | clocks = <&periph_osc>; |
| 136 | |
| 137 | status = "disabled"; |
| 138 | }; |
| 139 | |
| 140 | uart1: serial@10000120 { |
| 141 | compatible = "brcm,bcm6345-uart"; |
| 142 | reg = <0x10000120 0x18>; |
| 143 | clocks = <&periph_osc>; |
| 144 | |
| 145 | status = "disabled"; |
| 146 | }; |
| 147 | |
| 148 | spi: spi@10000800 { |
| 149 | compatible = "brcm,bcm6358-spi"; |
| 150 | reg = <0x10000800 0x70c>; |
| 151 | #address-cells = <1>; |
| 152 | #size-cells = <0>; |
| 153 | clocks = <&periph_clk BCM6368_CLK_SPI>; |
| 154 | resets = <&periph_rst BCM6368_RST_SPI>; |
| 155 | spi-max-frequency = <20000000>; |
| 156 | num-cs = <6>; |
| 157 | |
| 158 | status = "disabled"; |
| 159 | }; |
| 160 | |
| 161 | memory-controller@10001200 { |
| 162 | compatible = "brcm,bcm6358-mc"; |
| 163 | reg = <0x10001200 0x4c>; |
| 164 | u-boot,dm-pre-reloc; |
| 165 | }; |
| Álvaro Fernández Rojas | 3c28c1d | 2018-02-04 21:10:14 +0100 | [diff] [blame] | 166 | |
| 167 | ehci: usb-controller@10001500 { |
| 168 | compatible = "brcm,bcm6368-ehci", "generic-ehci"; |
| 169 | reg = <0x10001500 0x100>; |
| 170 | phys = <&usbh>; |
| 171 | big-endian; |
| 172 | |
| 173 | status = "disabled"; |
| 174 | }; |
| 175 | |
| 176 | ohci: usb-controller@10001600 { |
| 177 | compatible = "brcm,bcm6368-ohci", "generic-ohci"; |
| 178 | reg = <0x10001600 0x100>; |
| 179 | phys = <&usbh>; |
| 180 | big-endian; |
| 181 | |
| 182 | status = "disabled"; |
| 183 | }; |
| 184 | |
| 185 | usbh: usb-phy@10001700 { |
| 186 | compatible = "brcm,bcm6368-usbh"; |
| 187 | reg = <0x10001700 0x38>; |
| 188 | #phy-cells = <0>; |
| 189 | clocks = <&periph_clk BCM6368_CLK_USBH>; |
| 190 | clock-names = "usbh"; |
| 191 | resets = <&periph_rst BCM6368_RST_USBH>; |
| 192 | |
| 193 | status = "disabled"; |
| 194 | }; |
| Álvaro Fernández Rojas | 75d4cf2 | 2018-01-20 14:16:55 +0100 | [diff] [blame] | 195 | }; |
| 196 | }; |