wdenk | ef5fe75 | 2003-03-12 10:41:04 +0000 | [diff] [blame] | 1 | ============================================================================= |
| 2 | |
wdenk | 57b2d80 | 2003-06-27 21:31:46 +0000 | [diff] [blame] | 3 | U-Boot port on the LEOX's ELPT860 CPU board |
| 4 | ------------------------------------------- |
wdenk | ef5fe75 | 2003-03-12 10:41:04 +0000 | [diff] [blame] | 5 | |
| 6 | LEOX.org is about the development of free hardware and software resources |
wdenk | 57b2d80 | 2003-06-27 21:31:46 +0000 | [diff] [blame] | 7 | for system on chip. |
wdenk | ef5fe75 | 2003-03-12 10:41:04 +0000 | [diff] [blame] | 8 | |
| 9 | For more information, contact The LEOX team <team@leox.org> |
| 10 | |
| 11 | References: |
| 12 | ~~~~~~~~~~ |
| 13 | 1) Get the last stable release from denx.de: |
wdenk | 57b2d80 | 2003-06-27 21:31:46 +0000 | [diff] [blame] | 14 | o ftp://ftp.denx.de/pub/u-boot/u-boot-0.2.0.tar.bz2 |
wdenk | ef5fe75 | 2003-03-12 10:41:04 +0000 | [diff] [blame] | 15 | 2) Get the current CVS snapshot: |
wdenk | 57b2d80 | 2003-06-27 21:31:46 +0000 | [diff] [blame] | 16 | o cvs -d:pserver:anonymous@cvs.u-boot.sourceforge.net:/cvsroot/u-boot login |
| 17 | o cvs -z6 -d:pserver:anonymous@cvs.u-boot.sourceforge.net:/cvsroot/u-boot co -P u-boot |
wdenk | ef5fe75 | 2003-03-12 10:41:04 +0000 | [diff] [blame] | 18 | |
| 19 | ============================================================================= |
| 20 | |
| 21 | The ELPT860 CPU board has the following features: |
| 22 | |
| 23 | Processor: - MPC860T @ 50MHz |
| 24 | - PowerPC Core |
| 25 | - 65 MIPS |
| 26 | - Caches: D->4KB, I->4KB |
| 27 | - CPM: 4 SCCs, 2 SMCs |
| 28 | - Ethernet 10/100 |
| 29 | - SPI, I2C, PCMCIA, Parallel |
| 30 | |
| 31 | CPU board: - DRAM: 16 MB |
| 32 | - FLASH: 512 KB + (2 * 4 MB) |
| 33 | - NVRAM: 128 KB |
| 34 | - 1 Serial link |
| 35 | - 2 Ethernet 10 BaseT Channels |
| 36 | |
| 37 | On power-up the processor jumps to the address of 0x02000100 |
| 38 | |
| 39 | Thus, U-Boot is configured to reside in flash starting at the address of |
| 40 | 0x02001000. The environment space is located in NVRAM separately from |
| 41 | U-Boot, at the address of 0x03000000. |
| 42 | |
| 43 | ============================================================================= |
| 44 | |
wdenk | 57b2d80 | 2003-06-27 21:31:46 +0000 | [diff] [blame] | 45 | U-Boot test results |
wdenk | ef5fe75 | 2003-03-12 10:41:04 +0000 | [diff] [blame] | 46 | |
| 47 | ============================================================================= |
| 48 | |
| 49 | |
| 50 | ################################################## |
| 51 | # Operation on the serial console (SMC1) |
| 52 | ############################## |
| 53 | |
| 54 | U-Boot 0.2.2 (Jan 19 2003 - 11:08:39) |
| 55 | |
| 56 | CPU: XPC860xxZPnnB at 50 MHz: 4 kB I-Cache 4 kB D-Cache FEC present |
wdenk | 57b2d80 | 2003-06-27 21:31:46 +0000 | [diff] [blame] | 57 | *** Warning: CPU Core has Silicon Bugs -- Check the Errata *** |
wdenk | ef5fe75 | 2003-03-12 10:41:04 +0000 | [diff] [blame] | 58 | Board: ### No HW ID - assuming ELPT860 |
| 59 | DRAM: 16 MB |
| 60 | FLASH: 512 kB |
| 61 | In: serial |
| 62 | Out: serial |
| 63 | Err: serial |
| 64 | Net: SCC ETHERNET |
| 65 | |
| 66 | Type "run nfsboot" to mount root filesystem over NFS |
| 67 | |
| 68 | Hit any key to stop autoboot: 0 |
| 69 | LEOX_elpt860: help |
| 70 | askenv - get environment variables from stdin |
wdenk | ef5fe75 | 2003-03-12 10:41:04 +0000 | [diff] [blame] | 71 | base - print or set address offset |
| 72 | bdinfo - print Board Info structure |
| 73 | bootm - boot application image from memory |
| 74 | bootp - boot image via network using BootP/TFTP protocol |
| 75 | bootd - boot default, i.e., run 'bootcmd' |
| 76 | cmp - memory compare |
| 77 | coninfo - print console devices and informations |
| 78 | cp - memory copy |
| 79 | crc32 - checksum calculation |
| 80 | echo - echo args to console |
| 81 | erase - erase FLASH memory |
| 82 | flinfo - print FLASH memory information |
| 83 | go - start application at address 'addr' |
| 84 | help - print online help |
| 85 | iminfo - print header information for application image |
| 86 | loadb - load binary file over serial line (kermit mode) |
| 87 | loads - load S-Record file over serial line |
| 88 | loop - infinite loop on address range |
| 89 | md - memory display |
| 90 | mm - memory modify (auto-incrementing) |
| 91 | mtest - simple RAM test |
| 92 | mw - memory write (fill) |
| 93 | nm - memory modify (constant address) |
| 94 | printenv- print environment variables |
| 95 | protect - enable or disable FLASH write protection |
| 96 | rarpboot- boot image via network using RARP/TFTP protocol |
| 97 | reset - Perform RESET of the CPU |
| 98 | run - run commands in an environment variable |
| 99 | saveenv - save environment variables to persistent storage |
| 100 | setenv - set environment variables |
| 101 | sleep - delay execution for some time |
Peter Tyser | d78876c | 2009-09-16 21:38:10 -0500 | [diff] [blame] | 102 | source - run script from memory |
wdenk | ef5fe75 | 2003-03-12 10:41:04 +0000 | [diff] [blame] | 103 | tftpboot- boot image via network using TFTP protocol |
wdenk | 57b2d80 | 2003-06-27 21:31:46 +0000 | [diff] [blame] | 104 | and env variables ipaddr and serverip |
wdenk | ef5fe75 | 2003-03-12 10:41:04 +0000 | [diff] [blame] | 105 | version - print monitor version |
| 106 | ? - alias for 'help' |
| 107 | |
| 108 | ################################################## |
Jean-Christophe PLAGNIOL-VILLARD | fdb79c3 | 2008-09-10 22:47:59 +0200 | [diff] [blame] | 109 | # Environment Variables (CONFIG_ENV_IS_IN_NVRAM) |
wdenk | ef5fe75 | 2003-03-12 10:41:04 +0000 | [diff] [blame] | 110 | ############################## |
| 111 | |
| 112 | LEOX_elpt860: printenv |
| 113 | bootdelay=5 |
| 114 | loads_echo=1 |
| 115 | baudrate=9600 |
| 116 | stdin=serial |
| 117 | stdout=serial |
| 118 | stderr=serial |
| 119 | ethaddr=00:03:ca:00:64:df |
| 120 | ipaddr=192.168.0.30 |
| 121 | netmask=255.255.255.0 |
| 122 | serverip=192.168.0.1 |
| 123 | nfsserverip=192.168.0.1 |
| 124 | preboot=echo;echo Type "run nfsboot" to mount root filesystem over NFS;echo |
| 125 | gatewayip=192.168.0.1 |
| 126 | ramargs=setenv bootargs root=/dev/ram rw |
Wolfgang Denk | 86eb3b7 | 2005-11-20 21:40:11 +0100 | [diff] [blame] | 127 | rootargs=setenv rootpath /tftp/${ipaddr} |
| 128 | nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${nfsserverip}:${rootpath} |
| 129 | addip=setenv bootargs ${bootargs} ip=${ipaddr}:${nfsserverip}:${gatewayip}:${netmask}:${hostname}:eth0: |
wdenk | ef5fe75 | 2003-03-12 10:41:04 +0000 | [diff] [blame] | 130 | ramboot=tftp 400000 /home/leox/pMulti;run ramargs;bootm |
| 131 | nfsboot=tftp 400000 /home/leox/uImage;run rootargs;run nfsargs;run addip;bootm |
| 132 | bootcmd=run ramboot |
| 133 | clocks_in_mhz=1 |
| 134 | |
| 135 | Environment size: 730/16380 bytes |
| 136 | |
| 137 | ################################################## |
| 138 | # Flash Memory Information |
| 139 | ############################## |
| 140 | |
| 141 | LEOX_elpt860: flinfo |
| 142 | |
| 143 | Bank # 1: AMD AM29F040 (4 Mbits) |
| 144 | Size: 512 KB in 8 Sectors |
| 145 | Sector Start Addresses: |
wdenk | 57b2d80 | 2003-06-27 21:31:46 +0000 | [diff] [blame] | 146 | 02000000 (RO) 02010000 (RO) 02020000 (RO) 02030000 (RO) 02040000 |
| 147 | 02050000 02060000 02070000 |
wdenk | ef5fe75 | 2003-03-12 10:41:04 +0000 | [diff] [blame] | 148 | |
| 149 | ################################################## |
| 150 | # Board Information Structure |
| 151 | ############################## |
| 152 | |
| 153 | LEOX_elpt860: bdinfo |
| 154 | memstart = 0x00000000 |
| 155 | memsize = 0x01000000 |
| 156 | flashstart = 0x02000000 |
| 157 | flashsize = 0x00080000 |
| 158 | flashoffset = 0x00030000 |
| 159 | sramstart = 0x00000000 |
| 160 | sramsize = 0x00000000 |
| 161 | immr_base = 0xFF000000 |
| 162 | bootflags = 0x00000001 |
| 163 | intfreq = 50 MHz |
| 164 | busfreq = 50 MHz |
| 165 | ethaddr = 00:03:ca:00:64:df |
| 166 | IP addr = 192.168.0.30 |
| 167 | baudrate = 9600 bps |
| 168 | |
| 169 | ################################################## |
| 170 | # Image Download and run over serial port |
| 171 | # hello_world (S-Record image) |
| 172 | # ===> 1) Enter "loads" command into U-Boot monitor |
| 173 | # ===> 2) From TeraTerm's bar menu, Select 'File/Send file...' |
| 174 | # Then select 'hello_world.srec' with the file browser |
| 175 | ############################## |
| 176 | |
| 177 | U-Boot 0.2.2 (Jan 19 2003 - 11:08:39) |
| 178 | |
| 179 | CPU: XPC860xxZPnnB at 50 MHz: 4 kB I-Cache 4 kB D-Cache FEC present |
wdenk | 57b2d80 | 2003-06-27 21:31:46 +0000 | [diff] [blame] | 180 | *** Warning: CPU Core has Silicon Bugs -- Check the Errata *** |
wdenk | ef5fe75 | 2003-03-12 10:41:04 +0000 | [diff] [blame] | 181 | Board: ### No HW ID - assuming ELPT860 |
| 182 | DRAM: 16 MB |
| 183 | FLASH: 512 kB |
| 184 | In: serial |
| 185 | Out: serial |
| 186 | Err: serial |
| 187 | Net: SCC ETHERNET |
| 188 | |
| 189 | Type "run nfsboot" to mount root filesystem over NFS |
| 190 | |
| 191 | Hit any key to stop autoboot: 0 |
| 192 | LEOX_elpt860: loads |
| 193 | ## Ready for S-Record download ... |
| 194 | S804040004F3050154000501709905014C000501388D |
| 195 | ## First Load Addr = 0x00040000 |
| 196 | ## Last Load Addr = 0x0005018B |
| 197 | ## Total Size = 0x0001018C = 65932 Bytes |
| 198 | ## Start Addr = 0x00040004 |
| 199 | LEOX_elpt860: go 40004 This is a test !!! |
| 200 | ## Starting application at 0x00040004 ... |
| 201 | Hello World |
| 202 | argc = 6 |
| 203 | argv[0] = "40004" |
| 204 | argv[1] = "This" |
| 205 | argv[2] = "is" |
| 206 | argv[3] = "a" |
| 207 | argv[4] = "test" |
| 208 | argv[5] = "!!!" |
| 209 | argv[6] = "<NULL>" |
| 210 | Hit any key to exit ... |
| 211 | |
| 212 | ## Application terminated, rc = 0x0 |
| 213 | |
| 214 | ################################################## |
| 215 | # Image download and run over ethernet interface |
| 216 | # Linux-2.4.4 (uImage) + Root filesystem mounted over NFS |
| 217 | ############################## |
| 218 | |
| 219 | U-Boot 0.2.2 (Jan 19 2003 - 11:08:39) |
| 220 | |
| 221 | CPU: XPC860xxZPnnB at 50 MHz: 4 kB I-Cache 4 kB D-Cache FEC present |
wdenk | 57b2d80 | 2003-06-27 21:31:46 +0000 | [diff] [blame] | 222 | *** Warning: CPU Core has Silicon Bugs -- Check the Errata *** |
wdenk | ef5fe75 | 2003-03-12 10:41:04 +0000 | [diff] [blame] | 223 | Board: ### No HW ID - assuming ELPT860 |
| 224 | DRAM: 16 MB |
| 225 | FLASH: 512 kB |
| 226 | In: serial |
| 227 | Out: serial |
| 228 | Err: serial |
| 229 | Net: SCC ETHERNET |
| 230 | |
| 231 | Type "run nfsboot" to mount root filesystem over NFS |
| 232 | |
| 233 | Hit any key to stop autoboot: 0 |
| 234 | LEOX_elpt860: run nfsboot |
| 235 | ARP broadcast 1 |
| 236 | TFTP from server 192.168.0.1; our IP address is 192.168.0.30 |
| 237 | Filename '/home/leox/uImage'. |
| 238 | Load address: 0x400000 |
| 239 | Loading: ################################################################# |
wdenk | 57b2d80 | 2003-06-27 21:31:46 +0000 | [diff] [blame] | 240 | ############################# |
wdenk | ef5fe75 | 2003-03-12 10:41:04 +0000 | [diff] [blame] | 241 | done |
| 242 | Bytes transferred = 477294 (7486e hex) |
| 243 | ## Booting image at 00400000 ... |
| 244 | Image Name: Linux-2.4.4 |
| 245 | Image Type: PowerPC Linux Kernel Image (gzip compressed) |
| 246 | Data Size: 477230 Bytes = 466 kB = 0 MB |
| 247 | Load Address: 00000000 |
| 248 | Entry Point: 00000000 |
| 249 | Verifying Checksum ... OK |
| 250 | Uncompressing Kernel Image ... OK |
| 251 | Linux version 2.4.4-rthal5 (leox@p5ak6650) (gcc version 2.95.3 20010315 (release/MontaVista)) #1 Wed Jul 3 10:23:53 CEST 2002 |
| 252 | On node 0 totalpages: 4096 |
| 253 | zone(0): 4096 pages. |
| 254 | zone(1): 0 pages. |
| 255 | zone(2): 0 pages. |
| 256 | Kernel command line: root=/dev/nfs rw nfsroot=192.168.0.1:/tftp/192.168.0.30 ip=192.168.0.30:192.168.0.1:192.168.0.1:255.255.255.0::eth0: |
| 257 | rtsched version <20010618.1050.24> |
| 258 | Decrementer Frequency: 3125000 |
| 259 | Warning: real time clock seems stuck! |
| 260 | Calibrating delay loop... 49.76 BogoMIPS |
| 261 | Memory: 14720k available (928k kernel code, 384k data, 44k init, 0k highmem) |
| 262 | Dentry-cache hash table entries: 2048 (order: 2, 16384 bytes) |
| 263 | Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) |
| 264 | Page-cache hash table entries: 4096 (order: 2, 16384 bytes) |
| 265 | Inode-cache hash table entries: 1024 (order: 1, 8192 bytes) |
| 266 | POSIX conformance testing by UNIFIX |
| 267 | Linux NET4.0 for Linux 2.4 |
| 268 | Based upon Swansea University Computer Society NET3.039 |
| 269 | Starting kswapd v1.8 |
| 270 | CPM UART driver version 0.03 |
| 271 | ttyS0 on SMC1 at 0x0280, BRG1 |
| 272 | block: queued sectors max/low 9701kB/3233kB, 64 slots per queue |
| 273 | RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize |
| 274 | eth0: CPM ENET Version 0.2 on SCC1, 00:03:ca:00:64:df |
| 275 | NET4: Linux TCP/IP 1.0 for NET4.0 |
| 276 | IP Protocols: ICMP, UDP, TCP |
| 277 | IP: routing cache hash table of 512 buckets, 4Kbytes |
| 278 | TCP: Hash tables configured (established 1024 bind 1024) |
| 279 | NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. |
| 280 | Looking up port of RPC 100003/2 on 192.168.0.1 |
| 281 | Looking up port of RPC 100005/2 on 192.168.0.1 |
| 282 | VFS: Mounted root (nfs filesystem). |
| 283 | Freeing unused kernel memory: 44k init |
| 284 | INIT: version 2.78 booting |
wdenk | 57b2d80 | 2003-06-27 21:31:46 +0000 | [diff] [blame] | 285 | Welcome to DENX Embedded Linux Environment |
| 286 | Press 'I' to enter interactive startup. |
wdenk | ef5fe75 | 2003-03-12 10:41:04 +0000 | [diff] [blame] | 287 | Mounting proc filesystem: [ OK ] |
| 288 | Configuring kernel parameters: [ OK ] |
| 289 | Cannot access the Hardware Clock via any known method. |
| 290 | Use the --debug option to see the details of our search for an access method. |
| 291 | Setting clock : Wed Dec 31 19:00:11 EST 1969 [ OK ] |
| 292 | Activating swap partitions: [ OK ] |
| 293 | Setting hostname 192.168.0.30: [ OK ] |
| 294 | Finding module dependencies: |
| 295 | [ OK ] |
| 296 | Checking filesystems |
| 297 | Checking all file systems. |
| 298 | [ OK ] |
| 299 | Mounting local filesystems: [ OK ] |
| 300 | Enabling swap space: [ OK ] |
| 301 | INIT: Entering runlevel: 3 |
| 302 | Entering non-interactive startup |
| 303 | Starting system logger: [ OK ] |
| 304 | Starting kernel logger: [ OK ] |
| 305 | Starting xinetd: [ OK ] |
| 306 | |
| 307 | 192 login: root |
| 308 | Last login: Wed Dec 31 19:00:41 on ttyS0 |
| 309 | bash-2.04# |
| 310 | |
| 311 | ################################################## |
| 312 | # Image download and run over ethernet interface |
| 313 | # Linux-2.4.4 + Root filesystem mounted from RAM (pMulti) |
| 314 | ############################## |
| 315 | |
| 316 | U-Boot 0.2.2 (Jan 19 2003 - 11:08:39) |
| 317 | |
| 318 | CPU: XPC860xxZPnnB at 50 MHz: 4 kB I-Cache 4 kB D-Cache FEC present |
wdenk | 57b2d80 | 2003-06-27 21:31:46 +0000 | [diff] [blame] | 319 | *** Warning: CPU Core has Silicon Bugs -- Check the Errata *** |
wdenk | ef5fe75 | 2003-03-12 10:41:04 +0000 | [diff] [blame] | 320 | Board: ### No HW ID - assuming ELPT860 |
| 321 | DRAM: 16 MB |
| 322 | FLASH: 512 kB |
| 323 | In: serial |
| 324 | Out: serial |
| 325 | Err: serial |
| 326 | Net: SCC ETHERNET |
| 327 | |
| 328 | Type "run nfsboot" to mount root filesystem over NFS |
| 329 | |
| 330 | Hit any key to stop autoboot: 0 |
| 331 | LEOX_elpt860: run ramboot |
| 332 | ARP broadcast 1 |
| 333 | TFTP from server 192.168.0.1; our IP address is 192.168.0.30 |
| 334 | Filename '/home/leox/pMulti'. |
| 335 | Load address: 0x400000 |
| 336 | Loading: ################################################################# |
wdenk | 57b2d80 | 2003-06-27 21:31:46 +0000 | [diff] [blame] | 337 | ################################################################# |
| 338 | ################################################################# |
| 339 | ################################################################# |
| 340 | ################################################################# |
| 341 | ######################################################## |
wdenk | ef5fe75 | 2003-03-12 10:41:04 +0000 | [diff] [blame] | 342 | done |
| 343 | Bytes transferred = 1947816 (1db8a8 hex) |
| 344 | ## Booting image at 00400000 ... |
| 345 | Image Name: linux-2.4.4-2002-03-21 Multiboot |
| 346 | Image Type: PowerPC Linux Multi-File Image (gzip compressed) |
| 347 | Data Size: 1947752 Bytes = 1902 kB = 1 MB |
| 348 | Load Address: 00000000 |
| 349 | Entry Point: 00000000 |
| 350 | Contents: |
| 351 | Image 0: 477230 Bytes = 466 kB = 0 MB |
| 352 | Image 1: 1470508 Bytes = 1436 kB = 1 MB |
| 353 | Verifying Checksum ... OK |
| 354 | Uncompressing Multi-File Image ... OK |
| 355 | Loading Ramdisk to 00e44000, end 00fab02c ... OK |
| 356 | Linux version 2.4.4-rthal5 (leox@p5ak6650) (gcc version 2.95.3 20010315 (release/MontaVista)) #1 Wed Jul 3 10:23:53 CEST 2002 |
| 357 | On node 0 totalpages: 4096 |
| 358 | zone(0): 4096 pages. |
| 359 | zone(1): 0 pages. |
| 360 | zone(2): 0 pages. |
| 361 | Kernel command line: root=/dev/ram rw |
| 362 | rtsched version <20010618.1050.24> |
| 363 | Decrementer Frequency: 3125000 |
| 364 | Warning: real time clock seems stuck! |
| 365 | Calibrating delay loop... 49.76 BogoMIPS |
| 366 | Memory: 13280k available (928k kernel code, 384k data, 44k init, 0k highmem) |
| 367 | Dentry-cache hash table entries: 2048 (order: 2, 16384 bytes) |
| 368 | Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) |
| 369 | Page-cache hash table entries: 4096 (order: 2, 16384 bytes) |
| 370 | Inode-cache hash table entries: 1024 (order: 1, 8192 bytes) |
| 371 | POSIX conformance testing by UNIFIX |
| 372 | Linux NET4.0 for Linux 2.4 |
| 373 | Based upon Swansea University Computer Society NET3.039 |
| 374 | Starting kswapd v1.8 |
| 375 | CPM UART driver version 0.03 |
| 376 | ttyS0 on SMC1 at 0x0280, BRG1 |
| 377 | block: queued sectors max/low 8741kB/2913kB, 64 slots per queue |
| 378 | RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize |
| 379 | eth0: CPM ENET Version 0.2 on SCC1, 00:03:ca:00:64:df |
| 380 | RAMDISK: Compressed image found at block 0 |
| 381 | Freeing initrd memory: 1436k freed |
| 382 | NET4: Linux TCP/IP 1.0 for NET4.0 |
| 383 | IP Protocols: ICMP, UDP, TCP |
| 384 | IP: routing cache hash table of 512 buckets, 4Kbytes |
| 385 | TCP: Hash tables configured (established 1024 bind 1024) |
| 386 | IP-Config: Incomplete network configuration information. |
| 387 | NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. |
| 388 | VFS: Mounted root (ext2 filesystem). |
| 389 | Freeing unused kernel memory: 44k iné |
| 390 | init started: BusyBox v0.60.2 (2002.07.01-12:06+0000) multi-call Configuring hostname |
| 391 | Configuring lo... |
| 392 | Configuring eth0... |
| 393 | Configuring Gateway... |
| 394 | |
| 395 | Please press Enter to activate this console. |
| 396 | |
| 397 | ELPT860 login: root |
| 398 | Password: |
| 399 | Welcome to Linux-2.4.4 for ELPT CPU board (MPC860T @ 50MHz) |
| 400 | |
wdenk | 57b2d80 | 2003-06-27 21:31:46 +0000 | [diff] [blame] | 401 | a8888b. |
| 402 | d888888b. |
| 403 | 8P"YP"Y88 |
wdenk | ef5fe75 | 2003-03-12 10:41:04 +0000 | [diff] [blame] | 404 | _ _ 8|o||o|88 |
| 405 | | | |_| 8' .88 |
| 406 | | | _ ____ _ _ _ _ 8`._.' Y8. |
| 407 | | | | | _ \| | | |\ \/ / d/ `8b. |
| 408 | | |___ | | | | | |_| |/ \ .dP . Y8b. |
| 409 | |_____||_|_| |_|\____|\_/\_/ d8:' " `::88b. |
wdenk | 57b2d80 | 2003-06-27 21:31:46 +0000 | [diff] [blame] | 410 | d8" `Y88b |
| 411 | :8P ' :888 |
| 412 | 8a. : _a88P |
| 413 | ._/"Yaa_ : .| 88P| |
| 414 | \ YP" `| 8P `. |
| 415 | / \._____.d| .' |
| 416 | `--..__)888888P`._.' |
wdenk | ef5fe75 | 2003-03-12 10:41:04 +0000 | [diff] [blame] | 417 | login[21]: root login on `ttyS0' |
| 418 | |
| 419 | |
| 420 | |
| 421 | BusyBox v0.60.3 (2002.07.20-10:39+0000) Built-in shell (ash) |
| 422 | Enter 'help' for a list of built-in commands. |
| 423 | |
| 424 | root@ELPT860:~ # |