Jagan Teki | 1db421e | 2022-12-14 23:21:11 +0530 | [diff] [blame^] | 1 | CONFIG_ARM=y |
| 2 | CONFIG_SPL_SKIP_LOWLEVEL_INIT_ONLY=y |
| 3 | CONFIG_TPL_SKIP_LOWLEVEL_INIT_ONLY=y |
| 4 | CONFIG_COUNTER_FREQUENCY=24000000 |
| 5 | CONFIG_SYS_ARCH_TIMER=y |
| 6 | CONFIG_ARCH_ROCKCHIP=y |
| 7 | CONFIG_NR_DRAM_BANKS=1 |
| 8 | CONFIG_DEFAULT_DEVICE_TREE="rv1126-edgeble-neu2-io" |
| 9 | CONFIG_ROCKCHIP_RV1126=y |
| 10 | CONFIG_TARGET_RV1126_NEU2=y |
| 11 | CONFIG_DEBUG_UART_BASE=0xff570000 |
| 12 | CONFIG_DEBUG_UART_CLOCK=24000000 |
| 13 | CONFIG_SYS_LOAD_ADDR=0xe00800 |
| 14 | CONFIG_DEBUG_UART=y |
| 15 | CONFIG_SYS_MONITOR_LEN=614400 |
| 16 | CONFIG_FIT_VERBOSE=y |
| 17 | CONFIG_DEFAULT_FDT_FILE="rv1126-edgeble-neu2-io.dtb" |
| 18 | # CONFIG_DISPLAY_CPUINFO is not set |
| 19 | CONFIG_DISPLAY_BOARDINFO_LATE=y |
| 20 | CONFIG_MISC_INIT_R=y |
| 21 | CONFIG_SPL_PAD_TO=0x7f8000 |
| 22 | CONFIG_SPL_NO_BSS_LIMIT=y |
| 23 | # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set |
| 24 | # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set |
| 25 | # CONFIG_CMD_BOOTD is not set |
| 26 | CONFIG_SYS_BOOTM_LEN=0x4000000 |
| 27 | # CONFIG_CMD_ELF is not set |
| 28 | # CONFIG_CMD_IMI is not set |
| 29 | # CONFIG_CMD_XIMG is not set |
| 30 | CONFIG_CMD_GPT=y |
| 31 | # CONFIG_CMD_LOADB is not set |
| 32 | # CONFIG_CMD_LOADS is not set |
| 33 | CONFIG_CMD_MMC=y |
| 34 | # CONFIG_CMD_ITEST is not set |
| 35 | # CONFIG_CMD_SETEXPR is not set |
| 36 | # CONFIG_SPL_DOS_PARTITION is not set |
| 37 | # CONFIG_ISO_PARTITION is not set |
| 38 | CONFIG_EFI_PARTITION_ENTRIES_NUMBERS=64 |
| 39 | CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" |
| 40 | CONFIG_ENV_IS_IN_MMC=y |
| 41 | CONFIG_SYS_RELOC_GD_ENV_ADDR=y |
| 42 | CONFIG_ROCKCHIP_GPIO=y |
| 43 | CONFIG_SYS_I2C_ROCKCHIP=y |
| 44 | CONFIG_MISC=y |
| 45 | CONFIG_MMC_DW=y |
| 46 | CONFIG_MMC_DW_ROCKCHIP=y |
| 47 | CONFIG_REGULATOR_PWM=y |
| 48 | CONFIG_PWM_ROCKCHIP=y |
| 49 | # CONFIG_RAM_ROCKCHIP_DEBUG is not set |
| 50 | CONFIG_BAUDRATE=1500000 |
| 51 | CONFIG_DEBUG_UART_SHIFT=2 |
| 52 | CONFIG_SYSRESET=y |
| 53 | # CONFIG_TPL_SYSRESET is not set |
| 54 | CONFIG_DM_THERMAL=y |
| 55 | CONFIG_SPL_TINY_MEMSET=y |
| 56 | CONFIG_LZO=y |
| 57 | CONFIG_ERRNO_STR=y |