Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / 1bbbb39def9504fb6ae3004d8123e47c18f5c9f3 / . / drivers / net / sk98lin / h / lm80.h
blob: 981a4cab02fcf1c7bb4a77730f0bdb616df95b67 [file] [log] [blame]
wdenkeb20ad32003-09-05 23:19:14 +0000[diff] [blame]1/******************************************************************************
2 *
wdenk9c53f402003-10-15 23:53:47 +0000[diff] [blame]3 * Name: lm80.h
wdenkeb20ad32003-09-05 23:19:14 +0000[diff] [blame]4 * Project: GEnesis, PCI Gigabit Ethernet Adapter
5 * Version: $Revision: 1.4 $
6 * Date: $Date: 2002/04/25 11:04:10 $
7 * Purpose: Contains all defines for the LM80 Chip
8 * (National Semiconductor).
9 *
10 ******************************************************************************/
11
12/******************************************************************************
13 *
14 * (C)Copyright 1998-2002 SysKonnect GmbH.
15 *
16 * This program is free software; you can redistribute it and/or modify
17 * it under the terms of the GNU General Public License as published by
18 * the Free Software Foundation; either version 2 of the License, or
19 * (at your option) any later version.
20 *
21 * The information in this file is provided "AS IS" without warranty.
22 *
23 ******************************************************************************/
24
25/******************************************************************************
26 *
27 * History:
28 * $Log: lm80.h,v $
29 * Revision 1.4 2002/04/25 11:04:10 rschmidt
30 * Editorial changes
wdenk9c53f402003-10-15 23:53:47 +0000[diff] [blame]31 *
wdenkeb20ad32003-09-05 23:19:14 +0000[diff] [blame]32 * Revision 1.3 1999/11/22 13:41:19 cgoos
33 * Changed license header to GPL.
wdenk9c53f402003-10-15 23:53:47 +0000[diff] [blame]34 *
wdenkeb20ad32003-09-05 23:19:14 +0000[diff] [blame]35 * Revision 1.2 1999/03/12 13:26:51 malthoff
36 * remove __STDC__.
wdenk9c53f402003-10-15 23:53:47 +0000[diff] [blame]37 *
wdenkeb20ad32003-09-05 23:19:14 +0000[diff] [blame]38 * Revision 1.1 1998/06/19 09:28:31 malthoff
39 * created.
wdenk9c53f402003-10-15 23:53:47 +0000[diff] [blame]40 *
wdenkeb20ad32003-09-05 23:19:14 +0000[diff] [blame]41 *
42 ******************************************************************************/
43
44#ifndef __INC_LM80_H
45#define __INC_LM80_H
46
47#ifdef __cplusplus
48extern "C" {
49#endif /* __cplusplus */
50
51/* defines ********************************************************************/
52
53/*
54 * LM80 register definition
55 *
56 * All registers are 8 bit wide
57 */
58#define LM80_CFG 0x00 /* Configuration Register */
59#define LM80_ISRC_1 0x01 /* Interrupt Status Register 1 */
60#define LM80_ISRC_2 0x02 /* Interrupt Status Register 2 */
61#define LM80_IMSK_1 0x03 /* Interrupt Mask Register 1 */
62#define LM80_IMSK_2 0x04 /* Interrupt Mask Register 2 */
63#define LM80_FAN_CTRL 0x05 /* Fan Devisor/RST#/OS# Register */
64#define LM80_TEMP_CTRL 0x06 /* OS# Config, Temp Res. Reg */
65 /* 0x07 - 0x1f reserved */
66 /* current values */
67#define LM80_VT0_IN 0x20 /* current Voltage 0 value */
68#define LM80_VT1_IN 0x21 /* current Voltage 1 value */
69#define LM80_VT2_IN 0x22 /* current Voltage 2 value */
70#define LM80_VT3_IN 0x23 /* current Voltage 3 value */
71#define LM80_VT4_IN 0x24 /* current Voltage 4 value */
72#define LM80_VT5_IN 0x25 /* current Voltage 5 value */
73#define LM80_VT6_IN 0x26 /* current Voltage 6 value */
74#define LM80_TEMP_IN 0x27 /* current Temperature value */
75#define LM80_FAN1_IN 0x28 /* current Fan 1 count */
76#define LM80_FAN2_IN 0x29 /* current Fan 2 count */
77 /* limit values */
78#define LM80_VT0_HIGH_LIM 0x2a /* high limit val for Voltage 0 */
79#define LM80_VT0_LOW_LIM 0x2b /* low limit val for Voltage 0 */
80#define LM80_VT1_HIGH_LIM 0x2c /* high limit val for Voltage 1 */
81#define LM80_VT1_LOW_LIM 0x2d /* low limit val for Voltage 1 */
82#define LM80_VT2_HIGH_LIM 0x2e /* high limit val for Voltage 2 */
83#define LM80_VT2_LOW_LIM 0x2f /* low limit val for Voltage 2 */
84#define LM80_VT3_HIGH_LIM 0x30 /* high limit val for Voltage 3 */
85#define LM80_VT3_LOW_LIM 0x31 /* low limit val for Voltage 3 */
86#define LM80_VT4_HIGH_LIM 0x32 /* high limit val for Voltage 4 */
87#define LM80_VT4_LOW_LIM 0x33 /* low limit val for Voltage 4 */
88#define LM80_VT5_HIGH_LIM 0x34 /* high limit val for Voltage 5 */
89#define LM80_VT5_LOW_LIM 0x35 /* low limit val for Voltage 5 */
90#define LM80_VT6_HIGH_LIM 0x36 /* high limit val for Voltage 6 */
91#define LM80_VT6_LOW_LIM 0x37 /* low limit val for Voltage 6 */
92#define LM80_THOT_LIM_UP 0x38 /* hot temperature limit (high) */
93#define LM80_THOT_LIM_LO 0x39 /* hot temperature limit (low) */
94#define LM80_TOS_LIM_UP 0x3a /* OS temperature limit (high) */
95#define LM80_TOS_LIM_LO 0x3b /* OS temperature limit (low) */
96#define LM80_FAN1_COUNT_LIM 0x3c /* Fan 1 count limit (high) */
97#define LM80_FAN2_COUNT_LIM 0x3d /* Fan 2 count limit (low) */
98 /* 0x3e - 0x3f reserved */
99
100/*
101 * LM80 bit definitions
102 */
103
104/* LM80_CFG Configuration Register */
105#define LM80_CFG_START (1<<0) /* start monitoring operation */
106#define LM80_CFG_INT_ENA (1<<1) /* enables the INT# Interrupt output */
107#define LM80_CFG_INT_POL (1<<2) /* INT# pol: 0 act low, 1 act high */
108#define LM80_CFG_INT_CLR (1<<3) /* disables INT#/RST_OUT#/OS# outputs */
109#define LM80_CFG_RESET (1<<4) /* signals a reset */
110#define LM80_CFG_CHASS_CLR (1<<5) /* clears Chassis Intrusion (CI) pin */
111#define LM80_CFG_GPO (1<<6) /* drives the GPO# pin */
112#define LM80_CFG_INIT (1<<7) /* restore power on defaults */
113
114/* LM80_ISRC_1 Interrupt Status Register 1 */
115/* LM80_IMSK_1 Interrupt Mask Register 1 */
116#define LM80_IS_VT0 (1<<0) /* limit exceeded for Voltage 0 */
117#define LM80_IS_VT1 (1<<1) /* limit exceeded for Voltage 1 */
118#define LM80_IS_VT2 (1<<2) /* limit exceeded for Voltage 2 */
119#define LM80_IS_VT3 (1<<3) /* limit exceeded for Voltage 3 */
120#define LM80_IS_VT4 (1<<4) /* limit exceeded for Voltage 4 */
121#define LM80_IS_VT5 (1<<5) /* limit exceeded for Voltage 5 */
122#define LM80_IS_VT6 (1<<6) /* limit exceeded for Voltage 6 */
123#define LM80_IS_INT_IN (1<<7) /* state of INT_IN# */
124
125/* LM80_ISRC_2 Interrupt Status Register 2 */
126/* LM80_IMSK_2 Interrupt Mask Register 2 */
127#define LM80_IS_TEMP (1<<0) /* HOT temperature limit exceeded */
128#define LM80_IS_BTI (1<<1) /* state of BTI# pin */
129#define LM80_IS_FAN1 (1<<2) /* count limit exceeded for Fan 1 */
130#define LM80_IS_FAN2 (1<<3) /* count limit exceeded for Fan 2 */
131#define LM80_IS_CI (1<<4) /* Chassis Intrusion occured */
132#define LM80_IS_OS (1<<5) /* OS temperature limit exceeded */
133 /* bit 6 and 7 are reserved in LM80_ISRC_2 */
134#define LM80_IS_HT_IRQ_MD (1<<6) /* Hot temperature interrupt mode */
135#define LM80_IS_OT_IRQ_MD (1<<7) /* OS temperature interrupt mode */
136
137/* LM80_FAN_CTRL Fan Devisor/RST#/OS# Register */
138#define LM80_FAN1_MD_SEL (1<<0) /* Fan 1 mode select */
139#define LM80_FAN2_MD_SEL (1<<1) /* Fan 2 mode select */
140#define LM80_FAN1_PRM_CTL (3<<2) /* Fan 1 speed control */
141#define LM80_FAN2_PRM_CTL (3<<4) /* Fan 2 speed control */
142#define LM80_FAN_OS_ENA (1<<6) /* enable OS mode on RST_OUT#/OS# pins*/
143#define LM80_FAN_RST_ENA (1<<7) /* sets RST_OUT#/OS# pins in RST mode */
144
145/* LM80_TEMP_CTRL OS# Config, Temp Res. Reg */
146#define LM80_TEMP_OS_STAT (1<<0) /* mirrors the state of RST_OUT#/OS# */
147#define LM80_TEMP_OS_POL (1<<1) /* select OS# polarity */
148#define LM80_TEMP_OS_MODE (1<<2) /* selects Interrupt mode */
149#define LM80_TEMP_RES (1<<3) /* selects 9 or 11 bit temp resulution*/
150#define LM80_TEMP_LSB (0xf<<4)/* 4 LSBs of 11 bit temp data */
151#define LM80_TEMP_LSB_9 (1<<7) /* LSB of 9 bit temperature data */
152
153 /* 0x07 - 0x1f reserved */
154/* LM80_VT0_IN current Voltage 0 value */
155/* LM80_VT1_IN current Voltage 1 value */
156/* LM80_VT2_IN current Voltage 2 value */
157/* LM80_VT3_IN current Voltage 3 value */
158/* LM80_VT4_IN current Voltage 4 value */
159/* LM80_VT5_IN current Voltage 5 value */
160/* LM80_VT6_IN current Voltage 6 value */
161/* LM80_TEMP_IN current temperature value */
162/* LM80_FAN1_IN current Fan 1 count */
163/* LM80_FAN2_IN current Fan 2 count */
164/* LM80_VT0_HIGH_LIM high limit val for Voltage 0 */
165/* LM80_VT0_LOW_LIM low limit val for Voltage 0 */
166/* LM80_VT1_HIGH_LIM high limit val for Voltage 1 */
167/* LM80_VT1_LOW_LIM low limit val for Voltage 1 */
168/* LM80_VT2_HIGH_LIM high limit val for Voltage 2 */
169/* LM80_VT2_LOW_LIM low limit val for Voltage 2 */
170/* LM80_VT3_HIGH_LIM high limit val for Voltage 3 */
171/* LM80_VT3_LOW_LIM low limit val for Voltage 3 */
172/* LM80_VT4_HIGH_LIM high limit val for Voltage 4 */
173/* LM80_VT4_LOW_LIM low limit val for Voltage 4 */
174/* LM80_VT5_HIGH_LIM high limit val for Voltage 5 */
175/* LM80_VT5_LOW_LIM low limit val for Voltage 5 */
176/* LM80_VT6_HIGH_LIM high limit val for Voltage 6 */
177/* LM80_VT6_LOW_LIM low limit val for Voltage 6 */
178/* LM80_THOT_LIM_UP hot temperature limit (high) */
179/* LM80_THOT_LIM_LO hot temperature limit (low) */
180/* LM80_TOS_LIM_UP OS temperature limit (high) */
181/* LM80_TOS_LIM_LO OS temperature limit (low) */
182/* LM80_FAN1_COUNT_LIM Fan 1 count limit (high) */
183/* LM80_FAN2_COUNT_LIM Fan 2 count limit (low) */
184 /* 0x3e - 0x3f reserved */
185
186#define LM80_ADDR 0x28 /* LM80 default addr */
187
188/* typedefs *******************************************************************/
189
190
191/* function prototypes ********************************************************/
192
193#ifdef __cplusplus
194}
195#endif /* __cplusplus */
196
197#endif /* __INC_LM80_H */