Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / 1a3732cb2575df75dcf83479a7d69266eff9745a / . / board / amlogic / q200 / README.q200
blob: 55d730a0d200c80020c5aa2c167c5b386a143ed7 [file] [log] [blame]
Neil Armstrong716dbbf2018-11-09 11:57:47 +0100[diff] [blame]1U-Boot for Amlogic Q200
Loic Devulderd17b8092018-10-03 12:02:07 +0200[diff] [blame]2=======================
3
Neil Armstrong716dbbf2018-11-09 11:57:47 +0100[diff] [blame]4Q200 is a reference board manufactured by Amlogic with the following
5specifications:
Loic Devulderd17b8092018-10-03 12:02:07 +0200[diff] [blame]6
7 - Amlogic S912 ARM Cortex-A53 octo-core SoC @ 1.5GHz
8 - ARM Mali T860 GPU
9 - 2/3GB DDR4 SDRAM
10 - 10/100/1000 Ethernet
11 - HDMI 2.0 4K/60Hz display
Neil Armstrong716dbbf2018-11-09 11:57:47 +0100[diff] [blame]12 - 2 x USB 2.0 Host, 1 x USB 2.0 Device
Loic Devulderd17b8092018-10-03 12:02:07 +0200[diff] [blame]13 - 16GB/32GB/64GB eMMC
14 - 2MB SPI Flash
15 - microSD
16 - SDIO Wifi Module, Bluetooth
Neil Armstrong716dbbf2018-11-09 11:57:47 +0100[diff] [blame]17 - IR receiver
Loic Devulderd17b8092018-10-03 12:02:07 +0200[diff] [blame]18
19Currently the u-boot port supports the following devices:
20 - serial
21 - eMMC, microSD
22 - Ethernet
23 - I2C
24 - Regulators
25 - Reset controller
26 - Clock controller
27 - USB Host
28 - ADC
29
30U-Boot compilation
31==================
32
33 > export ARCH=arm
34 > export CROSS_COMPILE=aarch64-none-elf-
35 > make khadas-vim2_defconfig
36 > make
37
38Image creation
39==============
40
41Amlogic doesn't provide sources for the firmware and for tools needed
42to create the bootloader image, so it is necessary to obtain them from
43the git tree published by the board vendor:
44
45 > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
46 > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
47 > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
48 > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
49 > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH
Neil Armstrong716dbbf2018-11-09 11:57:47 +0100[diff] [blame]50 > git clone https://github.com/BayLibre/u-boot.git -b n-amlogic-openlinux-20170606 amlogic-u-boot
51 > cd amlogic-u-boot
52 > make gxm_q200_v1_defconfig
Loic Devulderd17b8092018-10-03 12:02:07 +0200[diff] [blame]53 > make
54 > export FIPDIR=$PWD/fip
55
56Go back to mainline U-Boot source tree then :
57 > mkdir fip
58
59 > cp $FIPDIR/gxl/bl2.bin fip/
60 > cp $FIPDIR/gxl/acs.bin fip/
61 > cp $FIPDIR/gxl/bl21.bin fip/
62 > cp $FIPDIR/gxl/bl30.bin fip/
63 > cp $FIPDIR/gxl/bl301.bin fip/
64 > cp $FIPDIR/gxl/bl31.img fip/
65 > cp u-boot.bin fip/bl33.bin
66
67 > $FIPDIR/blx_fix.sh \
68 fip/bl30.bin \
69 fip/zero_tmp \
70 fip/bl30_zero.bin \
71 fip/bl301.bin \
72 fip/bl301_zero.bin \
73 fip/bl30_new.bin \
74 bl30
75
76 > python $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0
77
78 > $FIPDIR/blx_fix.sh \
79 fip/bl2_acs.bin \
80 fip/zero_tmp \
81 fip/bl2_zero.bin \
82 fip/bl21.bin \
83 fip/bl21_zero.bin \
84 fip/bl2_new.bin \
85 bl2
86
87 > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin
88 > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img
89 > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin
90 > $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig
91 > $FIPDIR/gxl/aml_encrypt_gxl --bootmk \
92 --output fip/u-boot.bin \
93 --bl2 fip/bl2.n.bin.sig \
94 --bl30 fip/bl30_new.bin.enc \
95 --bl31 fip/bl31.img.enc \
96 --bl33 fip/bl33.bin.enc
97
98and then write the image to SD with:
99
100 > DEV=/dev/your_sd_device
101 > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
102 > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444