Teik Heng Chong | 8ab9578 | 2022-06-29 13:51:50 +0800 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause |
Siew Chin Lim | 1557df8 | 2021-08-10 11:26:30 +0800 | [diff] [blame] | 2 | /* |
Teik Heng Chong | 8ab9578 | 2022-06-29 13:51:50 +0800 | [diff] [blame] | 3 | * Copyright (C) 2020-2022 Intel Corporation <www.intel.com> |
Siew Chin Lim | 1557df8 | 2021-08-10 11:26:30 +0800 | [diff] [blame] | 4 | */ |
| 5 | |
Siew Chin Lim | 1557df8 | 2021-08-10 11:26:30 +0800 | [diff] [blame] | 6 | #include <asm/arch/clock_manager.h> |
| 7 | #include <asm/global_data.h> |
| 8 | #include <asm/io.h> |
| 9 | #include <clk-uclass.h> |
| 10 | #include <dm.h> |
| 11 | #include <dm/lists.h> |
| 12 | #include <dm/util.h> |
| 13 | #include <dt-bindings/clock/n5x-clock.h> |
| 14 | |
| 15 | DECLARE_GLOBAL_DATA_PTR; |
| 16 | |
| 17 | struct socfpga_clk_plat { |
| 18 | void __iomem *regs; |
| 19 | }; |
| 20 | |
| 21 | /* |
| 22 | * function to write the bypass register which requires a poll of the |
| 23 | * busy bit |
| 24 | */ |
| 25 | static void clk_write_bypass_mainpll(struct socfpga_clk_plat *plat, u32 val) |
| 26 | { |
| 27 | CM_REG_WRITEL(plat, val, CLKMGR_MAINPLL_BYPASS); |
| 28 | cm_wait_for_fsm(); |
| 29 | } |
| 30 | |
| 31 | static void clk_write_bypass_perpll(struct socfpga_clk_plat *plat, u32 val) |
| 32 | { |
| 33 | CM_REG_WRITEL(plat, val, CLKMGR_PERPLL_BYPASS); |
| 34 | cm_wait_for_fsm(); |
| 35 | } |
| 36 | |
| 37 | /* function to write the ctrl register which requires a poll of the busy bit */ |
| 38 | static void clk_write_ctrl(struct socfpga_clk_plat *plat, u32 val) |
| 39 | { |
| 40 | CM_REG_WRITEL(plat, val, CLKMGR_CTRL); |
| 41 | cm_wait_for_fsm(); |
| 42 | } |
| 43 | |
| 44 | /* |
| 45 | * Setup clocks while making no assumptions about previous state of the clocks. |
| 46 | */ |
| 47 | static void clk_basic_init(struct udevice *dev, |
| 48 | const struct cm_config * const cfg) |
| 49 | { |
| 50 | struct socfpga_clk_plat *plat = dev_get_plat(dev); |
| 51 | |
| 52 | if (!cfg) |
| 53 | return; |
| 54 | |
Simon Glass | 7ec2413 | 2024-09-29 19:49:48 -0600 | [diff] [blame] | 55 | #if IS_ENABLED(CONFIG_XPL_BUILD) |
Siew Chin Lim | 1557df8 | 2021-08-10 11:26:30 +0800 | [diff] [blame] | 56 | /* Always force clock manager into boot mode before any configuration */ |
| 57 | clk_write_ctrl(plat, |
| 58 | CM_REG_READL(plat, CLKMGR_CTRL) | CLKMGR_CTRL_BOOTMODE); |
| 59 | #else |
| 60 | /* Skip clock configuration in SSBL if it's not in boot mode */ |
| 61 | if (!(CM_REG_READL(plat, CLKMGR_CTRL) & CLKMGR_CTRL_BOOTMODE)) |
| 62 | return; |
| 63 | #endif |
| 64 | |
| 65 | /* Put both PLLs in bypass */ |
| 66 | clk_write_bypass_mainpll(plat, CLKMGR_BYPASS_MAINPLL_ALL); |
| 67 | clk_write_bypass_perpll(plat, CLKMGR_BYPASS_PERPLL_ALL); |
| 68 | |
| 69 | /* Put both PLLs in Reset */ |
| 70 | CM_REG_SETBITS(plat, CLKMGR_MAINPLL_PLLCTRL, |
| 71 | CLKMGR_PLLCTRL_BYPASS_MASK); |
| 72 | CM_REG_SETBITS(plat, CLKMGR_PERPLL_PLLCTRL, |
| 73 | CLKMGR_PLLCTRL_BYPASS_MASK); |
| 74 | |
| 75 | /* setup main PLL */ |
| 76 | CM_REG_WRITEL(plat, cfg->main_pll_pllglob, CLKMGR_MAINPLL_PLLGLOB); |
| 77 | CM_REG_WRITEL(plat, cfg->main_pll_plldiv, CLKMGR_MAINPLL_PLLDIV); |
| 78 | CM_REG_WRITEL(plat, cfg->main_pll_plloutdiv, CLKMGR_MAINPLL_PLLOUTDIV); |
| 79 | CM_REG_WRITEL(plat, cfg->main_pll_mpuclk, CLKMGR_MAINPLL_MPUCLK); |
| 80 | CM_REG_WRITEL(plat, cfg->main_pll_nocclk, CLKMGR_MAINPLL_NOCCLK); |
| 81 | CM_REG_WRITEL(plat, cfg->main_pll_nocdiv, CLKMGR_MAINPLL_NOCDIV); |
| 82 | |
| 83 | /* setup peripheral */ |
| 84 | CM_REG_WRITEL(plat, cfg->per_pll_pllglob, CLKMGR_PERPLL_PLLGLOB); |
| 85 | CM_REG_WRITEL(plat, cfg->per_pll_plldiv, CLKMGR_PERPLL_PLLDIV); |
| 86 | CM_REG_WRITEL(plat, cfg->per_pll_plloutdiv, CLKMGR_PERPLL_PLLOUTDIV); |
| 87 | CM_REG_WRITEL(plat, cfg->per_pll_emacctl, CLKMGR_PERPLL_EMACCTL); |
| 88 | CM_REG_WRITEL(plat, cfg->per_pll_gpiodiv, CLKMGR_PERPLL_GPIODIV); |
| 89 | |
| 90 | /* Take both PLL out of reset and power up */ |
| 91 | CM_REG_CLRBITS(plat, CLKMGR_MAINPLL_PLLCTRL, |
| 92 | CLKMGR_PLLCTRL_BYPASS_MASK); |
| 93 | CM_REG_CLRBITS(plat, CLKMGR_PERPLL_PLLCTRL, |
| 94 | CLKMGR_PLLCTRL_BYPASS_MASK); |
| 95 | |
| 96 | cm_wait_for_lock(CLKMGR_STAT_ALLPLL_LOCKED_MASK); |
| 97 | |
| 98 | CM_REG_WRITEL(plat, cfg->alt_emacactr, CLKMGR_ALTR_EMACACTR); |
| 99 | CM_REG_WRITEL(plat, cfg->alt_emacbctr, CLKMGR_ALTR_EMACBCTR); |
| 100 | CM_REG_WRITEL(plat, cfg->alt_emacptpctr, CLKMGR_ALTR_EMACPTPCTR); |
| 101 | CM_REG_WRITEL(plat, cfg->alt_gpiodbctr, CLKMGR_ALTR_GPIODBCTR); |
| 102 | CM_REG_WRITEL(plat, cfg->alt_sdmmcctr, CLKMGR_ALTR_SDMMCCTR); |
| 103 | CM_REG_WRITEL(plat, cfg->alt_s2fuser0ctr, CLKMGR_ALTR_S2FUSER0CTR); |
| 104 | CM_REG_WRITEL(plat, cfg->alt_s2fuser1ctr, CLKMGR_ALTR_S2FUSER1CTR); |
| 105 | CM_REG_WRITEL(plat, cfg->alt_psirefctr, CLKMGR_ALTR_PSIREFCTR); |
| 106 | |
| 107 | /* Configure ping pong counters in altera group */ |
| 108 | CM_REG_WRITEL(plat, CLKMGR_LOSTLOCK_SET_MASK, CLKMGR_MAINPLL_LOSTLOCK); |
| 109 | CM_REG_WRITEL(plat, CLKMGR_LOSTLOCK_SET_MASK, CLKMGR_PERPLL_LOSTLOCK); |
| 110 | |
| 111 | CM_REG_WRITEL(plat, CM_REG_READL(plat, CLKMGR_MAINPLL_PLLGLOB) | |
| 112 | CLKMGR_PLLGLOB_CLR_LOSTLOCK_BYPASS_MASK, |
| 113 | CLKMGR_MAINPLL_PLLGLOB); |
| 114 | CM_REG_WRITEL(plat, CM_REG_READL(plat, CLKMGR_PERPLL_PLLGLOB) | |
| 115 | CLKMGR_PLLGLOB_CLR_LOSTLOCK_BYPASS_MASK, |
| 116 | CLKMGR_PERPLL_PLLGLOB); |
| 117 | |
| 118 | /* Take all PLLs out of bypass */ |
| 119 | clk_write_bypass_mainpll(plat, 0); |
| 120 | clk_write_bypass_perpll(plat, 0); |
| 121 | |
| 122 | /* Clear the loss of lock bits */ |
| 123 | CM_REG_CLRBITS(plat, CLKMGR_INTRCLR, |
| 124 | CLKMGR_INTER_PERPLLLOST_MASK | |
| 125 | CLKMGR_INTER_MAINPLLLOST_MASK); |
| 126 | |
| 127 | /* Take all ping pong counters out of reset */ |
| 128 | CM_REG_CLRBITS(plat, CLKMGR_ALTR_EXTCNTRST, |
| 129 | CLKMGR_ALT_EXTCNTRST_ALLCNTRST_MASK); |
| 130 | |
| 131 | /* Out of boot mode */ |
| 132 | clk_write_ctrl(plat, |
| 133 | CM_REG_READL(plat, CLKMGR_CTRL) & ~CLKMGR_CTRL_BOOTMODE); |
| 134 | } |
| 135 | |
| 136 | static u32 clk_get_5_1_clk_src(struct socfpga_clk_plat *plat, u32 reg) |
| 137 | { |
| 138 | u32 clksrc = CM_REG_READL(plat, reg); |
| 139 | |
| 140 | return (clksrc & CLKMGR_CLKSRC_MASK) >> CLKMGR_CLKSRC_OFFSET; |
| 141 | } |
| 142 | |
| 143 | static u64 clk_get_pll_output_hz(struct socfpga_clk_plat *plat, |
| 144 | u32 pllglob_reg, u32 plldiv_reg) |
| 145 | { |
| 146 | u64 clock = 0; |
| 147 | u32 clklsrc, divf, divr, divq, power = 1; |
| 148 | |
| 149 | /* Get input clock frequency */ |
| 150 | clklsrc = (CM_REG_READL(plat, pllglob_reg) & |
| 151 | CLKMGR_PLLGLOB_VCO_PSRC_MASK) >> |
| 152 | CLKMGR_PLLGLOB_VCO_PSRC_OFFSET; |
| 153 | |
| 154 | switch (clklsrc) { |
| 155 | case CLKMGR_VCO_PSRC_EOSC1: |
| 156 | clock = cm_get_osc_clk_hz(); |
| 157 | break; |
| 158 | case CLKMGR_VCO_PSRC_INTOSC: |
| 159 | clock = cm_get_intosc_clk_hz(); |
| 160 | break; |
| 161 | case CLKMGR_VCO_PSRC_F2S: |
| 162 | clock = cm_get_fpga_clk_hz(); |
| 163 | break; |
| 164 | } |
| 165 | |
| 166 | /* Calculate pll out clock frequency */ |
| 167 | divf = (CM_REG_READL(plat, plldiv_reg) & |
| 168 | CLKMGR_PLLDIV_FDIV_MASK) >> |
| 169 | CLKMGR_PLLDIV_FDIV_OFFSET; |
| 170 | |
| 171 | divr = (CM_REG_READL(plat, plldiv_reg) & |
| 172 | CLKMGR_PLLDIV_REFCLKDIV_MASK) >> |
| 173 | CLKMGR_PLLDIV_REFCLKDIV_OFFSET; |
| 174 | |
| 175 | divq = (CM_REG_READL(plat, plldiv_reg) & |
| 176 | CLKMGR_PLLDIV_OUTDIV_QDIV_MASK) >> |
| 177 | CLKMGR_PLLDIV_OUTDIV_QDIV_OFFSET; |
| 178 | |
| 179 | while (divq) { |
| 180 | power *= 2; |
| 181 | divq--; |
| 182 | } |
| 183 | |
| 184 | return (clock * 2 * (divf + 1)) / ((divr + 1) * power); |
| 185 | } |
| 186 | |
| 187 | static u64 clk_get_clksrc_hz(struct socfpga_clk_plat *plat, u32 clksrc_reg, |
| 188 | u32 main_div, u32 per_div) |
| 189 | { |
| 190 | u64 clock = 0; |
| 191 | u32 clklsrc = clk_get_5_1_clk_src(plat, clksrc_reg); |
| 192 | |
| 193 | switch (clklsrc) { |
| 194 | case CLKMGR_CLKSRC_MAIN: |
| 195 | clock = clk_get_pll_output_hz(plat, |
| 196 | CLKMGR_MAINPLL_PLLGLOB, |
| 197 | CLKMGR_MAINPLL_PLLDIV); |
| 198 | clock /= 1 + main_div; |
| 199 | break; |
| 200 | |
| 201 | case CLKMGR_CLKSRC_PER: |
| 202 | clock = clk_get_pll_output_hz(plat, |
| 203 | CLKMGR_PERPLL_PLLGLOB, |
| 204 | CLKMGR_PERPLL_PLLDIV); |
| 205 | clock /= 1 + per_div; |
| 206 | break; |
| 207 | |
| 208 | case CLKMGR_CLKSRC_OSC1: |
| 209 | clock = cm_get_osc_clk_hz(); |
| 210 | break; |
| 211 | |
| 212 | case CLKMGR_CLKSRC_INTOSC: |
| 213 | clock = cm_get_intosc_clk_hz(); |
| 214 | break; |
| 215 | |
| 216 | case CLKMGR_CLKSRC_FPGA: |
| 217 | clock = cm_get_fpga_clk_hz(); |
| 218 | break; |
| 219 | default: |
| 220 | return 0; |
| 221 | } |
| 222 | |
| 223 | return clock; |
| 224 | } |
| 225 | |
| 226 | static u64 clk_get_mpu_clk_hz(struct socfpga_clk_plat *plat) |
| 227 | { |
| 228 | u32 mainpll_c0cnt = (CM_REG_READL(plat, CLKMGR_MAINPLL_PLLOUTDIV) & |
| 229 | CLKMGR_PLLOUTDIV_C0CNT_MASK) >> |
| 230 | CLKMGR_PLLOUTDIV_C0CNT_OFFSET; |
| 231 | |
| 232 | u32 perpll_c0cnt = (CM_REG_READL(plat, CLKMGR_PERPLL_PLLOUTDIV) & |
| 233 | CLKMGR_PLLOUTDIV_C0CNT_MASK) >> |
| 234 | CLKMGR_PLLOUTDIV_C0CNT_OFFSET; |
| 235 | |
| 236 | u64 clock = clk_get_clksrc_hz(plat, CLKMGR_MAINPLL_MPUCLK, |
| 237 | mainpll_c0cnt, perpll_c0cnt); |
| 238 | |
| 239 | clock /= 1 + (CM_REG_READL(plat, CLKMGR_MAINPLL_MPUCLK) & |
| 240 | CLKMGR_CLKCNT_MSK); |
| 241 | |
| 242 | return clock; |
| 243 | } |
| 244 | |
| 245 | static u32 clk_get_l3_main_clk_hz(struct socfpga_clk_plat *plat) |
| 246 | { |
| 247 | u32 mainpll_c1cnt = (CM_REG_READL(plat, CLKMGR_MAINPLL_PLLOUTDIV) & |
| 248 | CLKMGR_PLLOUTDIV_C1CNT_MASK) >> |
| 249 | CLKMGR_PLLOUTDIV_C1CNT_OFFSET; |
| 250 | |
| 251 | u32 perpll_c1cnt = (CM_REG_READL(plat, CLKMGR_PERPLL_PLLOUTDIV) & |
| 252 | CLKMGR_PLLOUTDIV_C1CNT_MASK) >> |
| 253 | CLKMGR_PLLOUTDIV_C1CNT_OFFSET; |
| 254 | |
| 255 | return clk_get_clksrc_hz(plat, CLKMGR_MAINPLL_NOCCLK, |
| 256 | mainpll_c1cnt, perpll_c1cnt); |
| 257 | } |
| 258 | |
| 259 | static u32 clk_get_l4_main_clk_hz(struct socfpga_clk_plat *plat) |
| 260 | { |
| 261 | u64 clock = clk_get_l3_main_clk_hz(plat); |
| 262 | |
| 263 | clock /= BIT((CM_REG_READL(plat, CLKMGR_MAINPLL_NOCDIV) >> |
| 264 | CLKMGR_NOCDIV_L4MAIN_OFFSET) & |
| 265 | CLKMGR_NOCDIV_DIVIDER_MASK); |
| 266 | |
| 267 | return clock; |
| 268 | } |
| 269 | |
| 270 | static u32 clk_get_sdmmc_clk_hz(struct socfpga_clk_plat *plat) |
| 271 | { |
| 272 | u32 mainpll_c3cnt = (CM_REG_READL(plat, CLKMGR_MAINPLL_PLLOUTDIV) & |
| 273 | CLKMGR_PLLOUTDIV_C3CNT_MASK) >> |
| 274 | CLKMGR_PLLOUTDIV_C3CNT_OFFSET; |
| 275 | |
| 276 | u32 perpll_c3cnt = (CM_REG_READL(plat, CLKMGR_PERPLL_PLLOUTDIV) & |
| 277 | CLKMGR_PLLOUTDIV_C3CNT_MASK) >> |
| 278 | CLKMGR_PLLOUTDIV_C3CNT_OFFSET; |
| 279 | |
| 280 | u64 clock = clk_get_clksrc_hz(plat, CLKMGR_ALTR_SDMMCCTR, |
| 281 | mainpll_c3cnt, perpll_c3cnt); |
| 282 | |
| 283 | clock /= 1 + (CM_REG_READL(plat, CLKMGR_ALTR_SDMMCCTR) & |
| 284 | CLKMGR_CLKCNT_MSK); |
| 285 | |
| 286 | return clock / 4; |
| 287 | } |
| 288 | |
| 289 | static u32 clk_get_l4_sp_clk_hz(struct socfpga_clk_plat *plat) |
| 290 | { |
| 291 | u64 clock = clk_get_l3_main_clk_hz(plat); |
| 292 | |
| 293 | clock /= BIT((CM_REG_READL(plat, CLKMGR_MAINPLL_NOCDIV) >> |
| 294 | CLKMGR_NOCDIV_L4SPCLK_OFFSET) & |
| 295 | CLKMGR_NOCDIV_DIVIDER_MASK); |
| 296 | |
| 297 | return clock; |
| 298 | } |
| 299 | |
| 300 | static u32 clk_get_l4_mp_clk_hz(struct socfpga_clk_plat *plat) |
| 301 | { |
| 302 | u64 clock = clk_get_l3_main_clk_hz(plat); |
| 303 | |
| 304 | clock /= BIT((CM_REG_READL(plat, CLKMGR_MAINPLL_NOCDIV) >> |
| 305 | CLKMGR_NOCDIV_L4MPCLK_OFFSET) & |
| 306 | CLKMGR_NOCDIV_DIVIDER_MASK); |
| 307 | |
| 308 | return clock; |
| 309 | } |
| 310 | |
| 311 | static u32 clk_get_l4_sys_free_clk_hz(struct socfpga_clk_plat *plat) |
| 312 | { |
| 313 | if (CM_REG_READL(plat, CLKMGR_STAT) & CLKMGR_STAT_BOOTMODE) |
| 314 | return clk_get_l3_main_clk_hz(plat) / 2; |
| 315 | |
| 316 | return clk_get_l3_main_clk_hz(plat) / 4; |
| 317 | } |
| 318 | |
| 319 | static u32 clk_get_emac_clk_hz(struct socfpga_clk_plat *plat, u32 emac_id) |
| 320 | { |
| 321 | bool emacsel_a; |
| 322 | u32 ctl; |
| 323 | u32 ctr_reg; |
| 324 | u32 clock; |
| 325 | u32 div; |
| 326 | u32 reg; |
| 327 | |
| 328 | /* Get EMAC clock source */ |
| 329 | ctl = CM_REG_READL(plat, CLKMGR_PERPLL_EMACCTL); |
| 330 | if (emac_id == N5X_EMAC0_CLK) |
| 331 | ctl = (ctl >> CLKMGR_PERPLLGRP_EMACCTL_EMAC0SELB_OFFSET) & |
| 332 | CLKMGR_PERPLLGRP_EMACCTL_EMAC0SELB_MASK; |
| 333 | else if (emac_id == N5X_EMAC1_CLK) |
| 334 | ctl = (ctl >> CLKMGR_PERPLLGRP_EMACCTL_EMAC1SELB_OFFSET) & |
| 335 | CLKMGR_PERPLLGRP_EMACCTL_EMAC1SELB_MASK; |
| 336 | else if (emac_id == N5X_EMAC2_CLK) |
| 337 | ctl = (ctl >> CLKMGR_PERPLLGRP_EMACCTL_EMAC2SELB_OFFSET) & |
| 338 | CLKMGR_PERPLLGRP_EMACCTL_EMAC2SELB_MASK; |
| 339 | else |
| 340 | return 0; |
| 341 | |
| 342 | if (ctl) { |
| 343 | /* EMAC B source */ |
| 344 | emacsel_a = false; |
| 345 | ctr_reg = CLKMGR_ALTR_EMACBCTR; |
| 346 | } else { |
| 347 | /* EMAC A source */ |
| 348 | emacsel_a = true; |
| 349 | ctr_reg = CLKMGR_ALTR_EMACACTR; |
| 350 | } |
| 351 | |
| 352 | reg = CM_REG_READL(plat, ctr_reg); |
| 353 | clock = (reg & CLKMGR_ALT_EMACCTR_SRC_MASK) |
| 354 | >> CLKMGR_ALT_EMACCTR_SRC_OFFSET; |
| 355 | div = (reg & CLKMGR_ALT_EMACCTR_CNT_MASK) |
| 356 | >> CLKMGR_ALT_EMACCTR_CNT_OFFSET; |
| 357 | |
| 358 | switch (clock) { |
| 359 | case CLKMGR_CLKSRC_MAIN: |
| 360 | clock = clk_get_pll_output_hz(plat, |
| 361 | CLKMGR_MAINPLL_PLLGLOB, |
| 362 | CLKMGR_MAINPLL_PLLDIV); |
| 363 | |
| 364 | if (emacsel_a) { |
| 365 | clock /= 1 + ((CM_REG_READL(plat, |
| 366 | CLKMGR_MAINPLL_PLLOUTDIV) & |
| 367 | CLKMGR_PLLOUTDIV_C2CNT_MASK) >> |
| 368 | CLKMGR_PLLOUTDIV_C2CNT_OFFSET); |
| 369 | } else { |
| 370 | clock /= 1 + ((CM_REG_READL(plat, |
| 371 | CLKMGR_MAINPLL_PLLOUTDIV) & |
| 372 | CLKMGR_PLLOUTDIV_C3CNT_MASK) >> |
| 373 | CLKMGR_PLLOUTDIV_C3CNT_OFFSET); |
| 374 | } |
| 375 | break; |
| 376 | |
| 377 | case CLKMGR_CLKSRC_PER: |
| 378 | clock = clk_get_pll_output_hz(plat, |
| 379 | CLKMGR_PERPLL_PLLGLOB, |
| 380 | CLKMGR_PERPLL_PLLDIV); |
| 381 | if (emacsel_a) { |
| 382 | clock /= 1 + ((CM_REG_READL(plat, |
| 383 | CLKMGR_PERPLL_PLLOUTDIV) & |
| 384 | CLKMGR_PLLOUTDIV_C2CNT_MASK) >> |
| 385 | CLKMGR_PLLOUTDIV_C2CNT_OFFSET); |
| 386 | } else { |
| 387 | clock /= 1 + ((CM_REG_READL(plat, |
| 388 | CLKMGR_PERPLL_PLLOUTDIV) & |
| 389 | CLKMGR_PLLOUTDIV_C3CNT_MASK >> |
| 390 | CLKMGR_PLLOUTDIV_C3CNT_OFFSET)); |
| 391 | } |
| 392 | break; |
| 393 | |
| 394 | case CLKMGR_CLKSRC_OSC1: |
| 395 | clock = cm_get_osc_clk_hz(); |
| 396 | break; |
| 397 | |
| 398 | case CLKMGR_CLKSRC_INTOSC: |
| 399 | clock = cm_get_intosc_clk_hz(); |
| 400 | break; |
| 401 | |
| 402 | case CLKMGR_CLKSRC_FPGA: |
| 403 | clock = cm_get_fpga_clk_hz(); |
| 404 | break; |
| 405 | } |
| 406 | |
| 407 | clock /= 1 + div; |
| 408 | |
| 409 | return clock; |
| 410 | } |
| 411 | |
| 412 | static ulong socfpga_clk_get_rate(struct clk *clk) |
| 413 | { |
| 414 | struct socfpga_clk_plat *plat = dev_get_plat(clk->dev); |
| 415 | |
| 416 | switch (clk->id) { |
| 417 | case N5X_MPU_CLK: |
| 418 | return clk_get_mpu_clk_hz(plat); |
| 419 | case N5X_L4_MAIN_CLK: |
| 420 | return clk_get_l4_main_clk_hz(plat); |
| 421 | case N5X_L4_SYS_FREE_CLK: |
| 422 | return clk_get_l4_sys_free_clk_hz(plat); |
| 423 | case N5X_L4_MP_CLK: |
| 424 | return clk_get_l4_mp_clk_hz(plat); |
| 425 | case N5X_L4_SP_CLK: |
| 426 | return clk_get_l4_sp_clk_hz(plat); |
| 427 | case N5X_SDMMC_CLK: |
| 428 | return clk_get_sdmmc_clk_hz(plat); |
| 429 | case N5X_EMAC0_CLK: |
| 430 | case N5X_EMAC1_CLK: |
| 431 | case N5X_EMAC2_CLK: |
| 432 | return clk_get_emac_clk_hz(plat, clk->id); |
| 433 | case N5X_USB_CLK: |
| 434 | case N5X_NAND_X_CLK: |
| 435 | return clk_get_l4_mp_clk_hz(plat); |
| 436 | case N5X_NAND_CLK: |
| 437 | return clk_get_l4_mp_clk_hz(plat) / 4; |
| 438 | default: |
| 439 | return -ENXIO; |
| 440 | } |
| 441 | } |
| 442 | |
| 443 | static int socfpga_clk_enable(struct clk *clk) |
| 444 | { |
| 445 | return 0; |
| 446 | } |
| 447 | |
| 448 | static int socfpga_clk_probe(struct udevice *dev) |
| 449 | { |
| 450 | const struct cm_config *cm_default_cfg = cm_get_default_config(); |
| 451 | |
| 452 | clk_basic_init(dev, cm_default_cfg); |
| 453 | |
| 454 | return 0; |
| 455 | } |
| 456 | |
| 457 | static int socfpga_clk_of_to_plat(struct udevice *dev) |
| 458 | { |
| 459 | struct socfpga_clk_plat *plat = dev_get_plat(dev); |
| 460 | fdt_addr_t addr; |
| 461 | |
| 462 | addr = devfdt_get_addr(dev); |
| 463 | if (addr == FDT_ADDR_T_NONE) |
| 464 | return -EINVAL; |
| 465 | plat->regs = (void __iomem *)addr; |
| 466 | |
| 467 | return 0; |
| 468 | } |
| 469 | |
| 470 | static struct clk_ops socfpga_clk_ops = { |
| 471 | .enable = socfpga_clk_enable, |
| 472 | .get_rate = socfpga_clk_get_rate, |
| 473 | }; |
| 474 | |
| 475 | static const struct udevice_id socfpga_clk_match[] = { |
| 476 | { .compatible = "intel,n5x-clkmgr" }, |
| 477 | {} |
| 478 | }; |
| 479 | |
| 480 | U_BOOT_DRIVER(socfpga_n5x_clk) = { |
| 481 | .name = "clk-n5x", |
| 482 | .id = UCLASS_CLK, |
| 483 | .of_match = socfpga_clk_match, |
| 484 | .ops = &socfpga_clk_ops, |
| 485 | .probe = socfpga_clk_probe, |
| 486 | .of_to_plat = socfpga_clk_of_to_plat, |
| 487 | .plat_auto = sizeof(struct socfpga_clk_plat), |
| 488 | }; |