| Jagan Teki | c0f218b | 2021-03-16 21:52:03 +0530 | [diff] [blame] | 1 | // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) |
| 2 | /* |
| 3 | * Copyright (C) STMicroelectronics 2019 - All Rights Reserved |
| 4 | * Copyright (c) 2020 Amarula Solutions(India) |
| 5 | * Author: Jagan Teki <jagan@amarulasolutions.com> |
| 6 | */ |
| 7 | |
| 8 | #include <dt-bindings/clock/stm32mp1-clksrc.h> |
| 9 | #include "stm32mp15-u-boot.dtsi" |
| 10 | #include "stm32mp15-ddr3-icore-1x4Gb-1066-binG.dtsi" |
| 11 | |
| 12 | &vddcore { |
| 13 | u-boot,dm-pre-reloc; |
| 14 | }; |
| 15 | |
| 16 | &vdd { |
| 17 | u-boot,dm-pre-reloc; |
| 18 | }; |
| 19 | |
| 20 | &vdd_usb { |
| 21 | u-boot,dm-pre-reloc; |
| 22 | }; |
| 23 | |
| 24 | &vdda { |
| 25 | u-boot,dm-pre-reloc; |
| 26 | }; |
| 27 | |
| 28 | &vdd_ddr { |
| 29 | u-boot,dm-pre-reloc; |
| 30 | }; |
| 31 | |
| 32 | &vtt_ddr { |
| 33 | u-boot,dm-pre-reloc; |
| 34 | }; |
| 35 | |
| 36 | &vref_ddr { |
| 37 | u-boot,dm-pre-reloc; |
| 38 | }; |
| 39 | |
| 40 | &vdd_sd { |
| 41 | u-boot,dm-pre-reloc; |
| 42 | }; |
| 43 | |
| 44 | &v3v3 { |
| 45 | u-boot,dm-pre-reloc; |
| 46 | }; |
| 47 | |
| 48 | &v2v8 { |
| 49 | u-boot,dm-pre-reloc; |
| 50 | }; |
| 51 | |
| 52 | &v1v8 { |
| 53 | u-boot,dm-pre-reloc; |
| 54 | }; |
| 55 | |
| 56 | &rcc { |
| 57 | st,clksrc = < |
| 58 | CLK_MPU_PLL1P |
| 59 | CLK_AXI_PLL2P |
| 60 | CLK_MCU_PLL3P |
| 61 | CLK_PLL12_HSE |
| 62 | CLK_PLL3_HSE |
| 63 | CLK_PLL4_HSE |
| 64 | CLK_RTC_LSE |
| 65 | CLK_MCO1_DISABLED |
| 66 | CLK_MCO2_DISABLED |
| 67 | >; |
| 68 | |
| 69 | st,clkdiv = < |
| 70 | 1 /*MPU*/ |
| 71 | 0 /*AXI*/ |
| 72 | 0 /*MCU*/ |
| 73 | 1 /*APB1*/ |
| 74 | 1 /*APB2*/ |
| 75 | 1 /*APB3*/ |
| 76 | 1 /*APB4*/ |
| 77 | 2 /*APB5*/ |
| 78 | 23 /*RTC*/ |
| 79 | 0 /*MCO1*/ |
| 80 | 0 /*MCO2*/ |
| 81 | >; |
| 82 | |
| 83 | st,pkcs = < |
| 84 | CLK_CKPER_HSE |
| 85 | CLK_FMC_ACLK |
| 86 | CLK_QSPI_ACLK |
| 87 | CLK_ETH_DISABLED |
| 88 | CLK_SDMMC12_PLL4P |
| 89 | CLK_DSI_DSIPLL |
| 90 | CLK_STGEN_HSE |
| 91 | CLK_USBPHY_HSE |
| 92 | CLK_SPI2S1_PLL3Q |
| 93 | CLK_SPI2S23_PLL3Q |
| 94 | CLK_SPI45_HSI |
| 95 | CLK_SPI6_HSI |
| 96 | CLK_I2C46_HSI |
| 97 | CLK_SDMMC3_PLL4P |
| 98 | CLK_USBO_USBPHY |
| 99 | CLK_ADC_CKPER |
| 100 | CLK_CEC_LSE |
| 101 | CLK_I2C12_HSI |
| 102 | CLK_I2C35_HSI |
| 103 | CLK_UART1_HSI |
| 104 | CLK_UART24_HSI |
| 105 | CLK_UART35_HSI |
| 106 | CLK_UART6_HSI |
| 107 | CLK_UART78_HSI |
| 108 | CLK_SPDIF_PLL4P |
| 109 | CLK_FDCAN_PLL4R |
| 110 | CLK_SAI1_PLL3Q |
| 111 | CLK_SAI2_PLL3Q |
| 112 | CLK_SAI3_PLL3Q |
| 113 | CLK_SAI4_PLL3Q |
| 114 | CLK_RNG1_LSI |
| 115 | CLK_RNG2_LSI |
| 116 | CLK_LPTIM1_PCLK1 |
| 117 | CLK_LPTIM23_PCLK3 |
| 118 | CLK_LPTIM45_LSE |
| 119 | >; |
| 120 | |
| 121 | /* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */ |
| 122 | pll2: st,pll@1 { |
| 123 | compatible = "st,stm32mp1-pll"; |
| 124 | reg = <1>; |
| 125 | cfg = < 2 65 1 0 0 PQR(1,1,1) >; |
| 126 | frac = < 0x1400 >; |
| 127 | u-boot,dm-pre-reloc; |
| 128 | }; |
| 129 | |
| 130 | /* VCO = 417.8 MHz => P = 209, Q = 24, R = 11 */ |
| 131 | pll3: st,pll@2 { |
| 132 | compatible = "st,stm32mp1-pll"; |
| 133 | reg = <2>; |
| 134 | cfg = < 1 33 1 16 36 PQR(1,1,1) >; |
| 135 | frac = < 0x1a04 >; |
| 136 | u-boot,dm-pre-reloc; |
| 137 | }; |
| 138 | |
| 139 | /* VCO = 594.0 MHz => P = 99, Q = 74, R = 74 */ |
| 140 | pll4: st,pll@3 { |
| 141 | compatible = "st,stm32mp1-pll"; |
| 142 | reg = <3>; |
| 143 | cfg = < 3 98 5 7 7 PQR(1,1,1) >; |
| 144 | u-boot,dm-pre-reloc; |
| 145 | }; |
| 146 | }; |