wdenk | 232fe0b | 2003-09-02 22:48:03 +0000 | [diff] [blame] | 1 | /* |
| 2 | * (C) Copyright 2001-2003 |
| 3 | * Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd-electronics.com |
| 4 | * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com |
| 5 | * |
| 6 | * See file CREDITS for list of people who contributed to this |
| 7 | * project. |
| 8 | * |
| 9 | * This program is free software; you can redistribute it and/or |
| 10 | * modify it under the terms of the GNU General Public License as |
| 11 | * published by the Free Software Foundation; either version 2 of |
| 12 | * the License, or (at your option) any later version. |
| 13 | * |
| 14 | * This program is distributed in the hope that it will be useful, |
| 15 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 16 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 17 | * GNU General Public License for more details. |
| 18 | * |
| 19 | * You should have received a copy of the GNU General Public License |
| 20 | * along with this program; if not, write to the Free Software |
| 21 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| 22 | * MA 02111-1307 USA |
| 23 | */ |
| 24 | |
| 25 | #include <common.h> |
| 26 | #include <asm/processor.h> |
| 27 | #include <command.h> |
| 28 | |
| 29 | /* ------------------------------------------------------------------------- */ |
| 30 | |
| 31 | #ifdef FPGA_DEBUG |
| 32 | #define DBG(x...) printf(x) |
| 33 | #else |
| 34 | #define DBG(x...) |
| 35 | #endif /* DEBUG */ |
| 36 | |
| 37 | #define MAX_ONES 226 |
| 38 | |
| 39 | #ifdef CFG_FPGA_PRG |
| 40 | # define FPGA_PRG CFG_FPGA_PRG /* FPGA program pin (ppc output)*/ |
| 41 | # define FPGA_CLK CFG_FPGA_CLK /* FPGA clk pin (ppc output) */ |
| 42 | # define FPGA_DATA CFG_FPGA_DATA /* FPGA data pin (ppc output) */ |
| 43 | # define FPGA_DONE CFG_FPGA_DONE /* FPGA done pin (ppc input) */ |
| 44 | # define FPGA_INIT CFG_FPGA_INIT /* FPGA init pin (ppc input) */ |
| 45 | #else |
| 46 | # define FPGA_PRG 0x04000000 /* FPGA program pin (ppc output) */ |
| 47 | # define FPGA_CLK 0x02000000 /* FPGA clk pin (ppc output) */ |
| 48 | # define FPGA_DATA 0x01000000 /* FPGA data pin (ppc output) */ |
| 49 | # define FPGA_DONE 0x00800000 /* FPGA done pin (ppc input) */ |
| 50 | # define FPGA_INIT 0x00400000 /* FPGA init pin (ppc input) */ |
| 51 | #endif |
| 52 | |
| 53 | #define ERROR_FPGA_PRG_INIT_LOW -1 /* Timeout after PRG* asserted */ |
| 54 | #define ERROR_FPGA_PRG_INIT_HIGH -2 /* Timeout after PRG* deasserted */ |
| 55 | #define ERROR_FPGA_PRG_DONE -3 /* Timeout after programming */ |
| 56 | |
| 57 | #define SET_FPGA(data) out32(GPIO0_OR, data) |
| 58 | |
| 59 | #define FPGA_WRITE_1 { \ |
| 60 | SET_FPGA(FPGA_PRG | FPGA_DATA); /* set clock to 0 */ \ |
| 61 | SET_FPGA(FPGA_PRG | FPGA_DATA); /* set data to 1 */ \ |
| 62 | SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA); /* set clock to 1 */ \ |
| 63 | SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);} /* set data to 1 */ |
| 64 | |
| 65 | #define FPGA_WRITE_0 { \ |
| 66 | SET_FPGA(FPGA_PRG | FPGA_DATA); /* set clock to 0 */ \ |
| 67 | SET_FPGA(FPGA_PRG); /* set data to 0 */ \ |
| 68 | SET_FPGA(FPGA_PRG | FPGA_CLK); /* set clock to 1 */ \ |
| 69 | SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);} /* set data to 1 */ |
| 70 | |
| 71 | #if 0 |
| 72 | static int fpga_boot (unsigned char *fpgadata, int size) |
| 73 | { |
| 74 | int i, index, len; |
| 75 | int count; |
| 76 | |
| 77 | #ifdef CFG_FPGA_SPARTAN2 |
| 78 | int j; |
| 79 | #else |
| 80 | unsigned char b; |
| 81 | int bit; |
| 82 | #endif |
| 83 | |
| 84 | /* display infos on fpgaimage */ |
| 85 | index = 15; |
| 86 | for (i = 0; i < 4; i++) { |
| 87 | len = fpgadata[index]; |
| 88 | DBG ("FPGA: %s\n", &(fpgadata[index + 1])); |
| 89 | index += len + 3; |
| 90 | } |
| 91 | |
| 92 | #ifdef CFG_FPGA_SPARTAN2 |
| 93 | /* search for preamble 0xFFFFFFFF */ |
| 94 | while (1) { |
| 95 | if ((fpgadata[index] == 0xff) && (fpgadata[index + 1] == 0xff) |
| 96 | && (fpgadata[index + 2] == 0xff) |
| 97 | && (fpgadata[index + 3] == 0xff)) |
| 98 | break; /* preamble found */ |
| 99 | else |
| 100 | index++; |
| 101 | } |
| 102 | #else |
| 103 | /* search for preamble 0xFF2X */ |
| 104 | for (index = 0; index < size - 1; index++) { |
| 105 | if ((fpgadata[index] == 0xff) |
| 106 | && ((fpgadata[index + 1] & 0xf0) == 0x30)) |
| 107 | break; |
| 108 | } |
| 109 | index += 2; |
| 110 | #endif |
| 111 | |
| 112 | DBG ("FPGA: configdata starts at position 0x%x\n", index); |
| 113 | DBG ("FPGA: length of fpga-data %d\n", size - index); |
| 114 | |
| 115 | /* |
| 116 | * Setup port pins for fpga programming |
| 117 | */ |
| 118 | out32 (GPIO0_ODR, 0x00000000); /* no open drain pins */ |
| 119 | out32 (GPIO0_TCR, in32 (GPIO0_TCR) | FPGA_PRG | FPGA_CLK | FPGA_DATA); /* setup for output */ |
| 120 | out32 (GPIO0_OR, in32 (GPIO0_OR) | FPGA_PRG | FPGA_CLK | FPGA_DATA); /* set pins to high */ |
| 121 | |
| 122 | DBG ("%s, ", |
| 123 | ((in32 (GPIO0_IR) & FPGA_DONE) == 0) ? "NOT DONE" : "DONE"); |
| 124 | DBG ("%s\n", |
| 125 | ((in32 (GPIO0_IR) & FPGA_INIT) == 0) ? "NOT INIT" : "INIT"); |
| 126 | |
| 127 | /* |
| 128 | * Init fpga by asserting and deasserting PROGRAM* |
| 129 | */ |
| 130 | SET_FPGA (FPGA_CLK | FPGA_DATA); |
| 131 | |
| 132 | /* Wait for FPGA init line low */ |
| 133 | count = 0; |
| 134 | while (in32 (GPIO0_IR) & FPGA_INIT) { |
| 135 | udelay (1000); /* wait 1ms */ |
| 136 | /* Check for timeout - 100us max, so use 3ms */ |
| 137 | if (count++ > 3) { |
| 138 | DBG ("FPGA: Booting failed!\n"); |
| 139 | return ERROR_FPGA_PRG_INIT_LOW; |
| 140 | } |
| 141 | } |
| 142 | |
| 143 | DBG ("%s, ", |
| 144 | ((in32 (GPIO0_IR) & FPGA_DONE) == 0) ? "NOT DONE" : "DONE"); |
| 145 | DBG ("%s\n", |
| 146 | ((in32 (GPIO0_IR) & FPGA_INIT) == 0) ? "NOT INIT" : "INIT"); |
| 147 | |
| 148 | /* deassert PROGRAM* */ |
| 149 | SET_FPGA (FPGA_PRG | FPGA_CLK | FPGA_DATA); |
| 150 | |
| 151 | /* Wait for FPGA end of init period . */ |
| 152 | count = 0; |
| 153 | while (!(in32 (GPIO0_IR) & FPGA_INIT)) { |
| 154 | udelay (1000); /* wait 1ms */ |
| 155 | /* Check for timeout */ |
| 156 | if (count++ > 3) { |
| 157 | DBG ("FPGA: Booting failed!\n"); |
| 158 | return ERROR_FPGA_PRG_INIT_HIGH; |
| 159 | } |
| 160 | } |
| 161 | |
| 162 | DBG ("%s, ", |
| 163 | ((in32 (GPIO0_IR) & FPGA_DONE) == 0) ? "NOT DONE" : "DONE"); |
| 164 | DBG ("%s\n", |
| 165 | ((in32 (GPIO0_IR) & FPGA_INIT) == 0) ? "NOT INIT" : "INIT"); |
| 166 | |
| 167 | DBG ("write configuration data into fpga\n"); |
| 168 | /* write configuration-data into fpga... */ |
| 169 | |
| 170 | #ifdef CFG_FPGA_SPARTAN2 |
| 171 | /* |
| 172 | * Load uncompressed image into fpga |
| 173 | */ |
| 174 | for (i = index; i < size; i++) { |
| 175 | for (j = 0; j < 8; j++) { |
| 176 | if ((fpgadata[i] & 0x80) == 0x80) { |
| 177 | FPGA_WRITE_1; |
| 178 | } else { |
| 179 | FPGA_WRITE_0; |
| 180 | } |
| 181 | fpgadata[i] <<= 1; |
| 182 | } |
| 183 | } |
| 184 | #else /* ! CFG_FPGA_SPARTAN2 */ |
| 185 | /* send 0xff 0x20 */ |
| 186 | FPGA_WRITE_1; |
| 187 | FPGA_WRITE_1; |
| 188 | FPGA_WRITE_1; |
| 189 | FPGA_WRITE_1; |
| 190 | FPGA_WRITE_1; |
| 191 | FPGA_WRITE_1; |
| 192 | FPGA_WRITE_1; |
| 193 | FPGA_WRITE_1; |
| 194 | FPGA_WRITE_0; |
| 195 | FPGA_WRITE_0; |
| 196 | FPGA_WRITE_1; |
| 197 | FPGA_WRITE_0; |
| 198 | FPGA_WRITE_0; |
| 199 | FPGA_WRITE_0; |
| 200 | FPGA_WRITE_0; |
| 201 | FPGA_WRITE_0; |
| 202 | |
| 203 | /* |
| 204 | ** Bit_DeCompression |
| 205 | ** Code 1 .. maxOnes : n '1's followed by '0' |
| 206 | ** maxOnes + 1 .. maxOnes + 1 : n - 1 '1's no '0' |
| 207 | ** maxOnes + 2 .. 254 : n - (maxOnes + 2) '0's followed by '1' |
| 208 | ** 255 : '1' |
| 209 | */ |
| 210 | |
| 211 | for (i = index; i < size; i++) { |
| 212 | b = fpgadata[i]; |
| 213 | if ((b >= 1) && (b <= MAX_ONES)) { |
| 214 | for (bit = 0; bit < b; bit++) { |
| 215 | FPGA_WRITE_1; |
| 216 | } |
| 217 | FPGA_WRITE_0; |
| 218 | } else if (b == (MAX_ONES + 1)) { |
| 219 | for (bit = 1; bit < b; bit++) { |
| 220 | FPGA_WRITE_1; |
| 221 | } |
| 222 | } else if ((b >= (MAX_ONES + 2)) && (b <= 254)) { |
| 223 | for (bit = 0; bit < (b - (MAX_ONES + 2)); bit++) { |
| 224 | FPGA_WRITE_0; |
| 225 | } |
| 226 | FPGA_WRITE_1; |
| 227 | } else if (b == 255) { |
| 228 | FPGA_WRITE_1; |
| 229 | } |
| 230 | } |
| 231 | #endif /* CFG_FPGA_SPARTAN2 */ |
| 232 | |
| 233 | DBG ("%s, ", |
| 234 | ((in32 (GPIO0_IR) & FPGA_DONE) == 0) ? "NOT DONE" : "DONE"); |
| 235 | DBG ("%s\n", |
| 236 | ((in32 (GPIO0_IR) & FPGA_INIT) == 0) ? "NOT INIT" : "INIT"); |
| 237 | |
| 238 | /* |
| 239 | * Check if fpga's DONE signal - correctly booted ? |
| 240 | */ |
| 241 | |
| 242 | /* Wait for FPGA end of programming period . */ |
| 243 | count = 0; |
| 244 | while (!(in32 (GPIO0_IR) & FPGA_DONE)) { |
| 245 | udelay (1000); /* wait 1ms */ |
| 246 | /* Check for timeout */ |
| 247 | if (count++ > 3) { |
| 248 | DBG ("FPGA: Booting failed!\n"); |
| 249 | return ERROR_FPGA_PRG_DONE; |
| 250 | } |
| 251 | } |
| 252 | |
| 253 | DBG ("FPGA: Booting successful!\n"); |
| 254 | return 0; |
| 255 | } |
| 256 | #endif /* 0 */ |