Nobuhiro Iwamatsu | 53000ce | 2014-04-03 13:55:54 +0900 | [diff] [blame] | 1 | /* |
| 2 | * EHCI HCD (Host Controller Driver) for USB. |
| 3 | * |
| 4 | * Copyright (C) 2013,2014 Renesas Electronics Corporation |
| 5 | * Copyright (C) 2014 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> |
| 6 | * |
| 7 | * SPDX-License-Identifier: GPL-2.0 |
| 8 | */ |
| 9 | |
| 10 | #include <common.h> |
| 11 | #include <asm/io.h> |
| 12 | #include <asm/arch/ehci-rmobile.h> |
| 13 | #include "ehci.h" |
| 14 | |
| 15 | #if defined(CONFIG_R8A7740) |
| 16 | static u32 usb_base_address[CONFIG_USB_MAX_CONTROLLER_COUNT] = { |
| 17 | 0xC6700000 |
| 18 | }; |
| 19 | #elif defined(CONFIG_R8A7790) |
| 20 | static u32 usb_base_address[CONFIG_USB_MAX_CONTROLLER_COUNT] = { |
| 21 | 0xEE080000, /* USB0 (EHCI) */ |
| 22 | 0xEE0A0000, /* USB1 */ |
| 23 | 0xEE0C0000, /* USB2 */ |
Nobuhiro Iwamatsu | 53000ce | 2014-04-03 13:55:54 +0900 | [diff] [blame] | 24 | }; |
Nobuhiro Iwamatsu | 01e6f33 | 2014-11-04 09:56:42 +0900 | [diff] [blame] | 25 | #elif defined(CONFIG_R8A7791) || defined(CONFIG_R8A7793) || \ |
| 26 | defined(CONFIG_R8A7794) |
Nobuhiro Iwamatsu | c8e1e4d | 2014-07-24 14:52:07 +0900 | [diff] [blame] | 27 | static u32 usb_base_address[CONFIG_USB_MAX_CONTROLLER_COUNT] = { |
| 28 | 0xEE080000, /* USB0 (EHCI) */ |
| 29 | 0xEE0C0000, /* USB1 */ |
Nobuhiro Iwamatsu | c8e1e4d | 2014-07-24 14:52:07 +0900 | [diff] [blame] | 30 | }; |
Nobuhiro Iwamatsu | 53000ce | 2014-04-03 13:55:54 +0900 | [diff] [blame] | 31 | #else |
| 32 | #error rmobile EHCI USB driver not supported on this platform |
| 33 | #endif |
| 34 | |
| 35 | int ehci_hcd_stop(int index) |
| 36 | { |
| 37 | int i; |
| 38 | u32 base; |
| 39 | struct ahbcom_pci_bridge *ahbcom_pci; |
| 40 | |
| 41 | base = usb_base_address[index]; |
| 42 | ahbcom_pci = (struct ahbcom_pci_bridge *)(base + AHBPCI_OFFSET); |
| 43 | writel(0, &ahbcom_pci->ahb_bus_ctr); |
| 44 | |
| 45 | /* reset ehci */ |
| 46 | setbits_le32(base + EHCI_USBCMD, CMD_RESET); |
| 47 | for (i = 100; i > 0; i--) { |
| 48 | if (!(readl(base + EHCI_USBCMD) & CMD_RESET)) |
| 49 | break; |
| 50 | udelay(100); |
| 51 | } |
| 52 | |
| 53 | if (!i) |
| 54 | printf("error : ehci(%d) reset failed.\n", index); |
| 55 | |
| 56 | if (index == (CONFIG_USB_MAX_CONTROLLER_COUNT - 1)) |
| 57 | setbits_le32(SMSTPCR7, SMSTPCR703); |
| 58 | |
| 59 | return 0; |
| 60 | } |
| 61 | |
| 62 | int ehci_hcd_init(int index, enum usb_init_type init, |
| 63 | struct ehci_hccr **hccr, struct ehci_hcor **hcor) |
| 64 | { |
| 65 | u32 base; |
| 66 | u32 phys_base; |
| 67 | struct rmobile_ehci_reg *rehci; |
| 68 | struct ahbcom_pci_bridge *ahbcom_pci; |
| 69 | struct ahbconf_pci_bridge *ahbconf_pci; |
| 70 | struct ahb_pciconf *ahb_pciconf_ohci; |
| 71 | struct ahb_pciconf *ahb_pciconf_ehci; |
| 72 | uint32_t cap_base; |
| 73 | |
| 74 | base = usb_base_address[index]; |
| 75 | phys_base = base; |
| 76 | if (index == 0) |
| 77 | clrbits_le32(SMSTPCR7, SMSTPCR703); |
| 78 | |
| 79 | rehci = (struct rmobile_ehci_reg *)(base + EHCI_OFFSET); |
| 80 | ahbcom_pci = (struct ahbcom_pci_bridge *)(base + AHBPCI_OFFSET); |
| 81 | ahbconf_pci = |
| 82 | (struct ahbconf_pci_bridge *)(base + PCI_CONF_AHBPCI_OFFSET); |
| 83 | ahb_pciconf_ohci = (struct ahb_pciconf *)(base + PCI_CONF_OHCI_OFFSET); |
| 84 | ahb_pciconf_ehci = (struct ahb_pciconf *)(base + PCI_CONF_EHCI_OFFSET); |
| 85 | |
| 86 | /* Clock & Reset & Direct Power Down */ |
| 87 | clrsetbits_le32(&ahbcom_pci->usbctr, |
| 88 | (DIRPD | PCICLK_MASK | USBH_RST), USBCTR_WIN_SIZE_1GB); |
| 89 | clrbits_le32(&ahbcom_pci->usbctr, PLL_RST); |
| 90 | |
| 91 | /* AHB-PCI Bridge Communication Registers */ |
| 92 | writel(AHB_BUS_CTR_INIT, &ahbcom_pci->ahb_bus_ctr); |
| 93 | writel((CONFIG_SYS_SDRAM_BASE & 0xf0000000) | PCIAHB_WIN_PREFETCH, |
| 94 | &ahbcom_pci->pciahb_win1_ctr); |
| 95 | writel(0xf0000000 | PCIAHB_WIN_PREFETCH, |
| 96 | &ahbcom_pci->pciahb_win2_ctr); |
| 97 | writel(phys_base | PCIWIN2_PCICMD, &ahbcom_pci->ahbpci_win2_ctr); |
| 98 | |
| 99 | setbits_le32(&ahbcom_pci->pci_arbiter_ctr, |
| 100 | PCIBP_MODE | PCIREQ1 | PCIREQ0); |
| 101 | |
| 102 | /* PCI Configuration Registers for AHBPCI */ |
| 103 | writel(PCIWIN1_PCICMD | AHB_CFG_AHBPCI, |
| 104 | &ahbcom_pci->ahbpci_win1_ctr); |
| 105 | writel(phys_base + AHBPCI_OFFSET, &ahbconf_pci->basead); |
| 106 | writel(CONFIG_SYS_SDRAM_BASE & 0xf0000000, &ahbconf_pci->win1_basead); |
| 107 | writel(0xf0000000, &ahbconf_pci->win2_basead); |
| 108 | writel(SERREN | PERREN | MASTEREN | MEMEN, |
| 109 | &ahbconf_pci->cmnd_sts); |
| 110 | |
| 111 | /* PCI Configuration Registers for EHCI */ |
| 112 | writel(PCIWIN1_PCICMD | AHB_CFG_HOST, &ahbcom_pci->ahbpci_win1_ctr); |
| 113 | writel(phys_base + OHCI_OFFSET, &ahb_pciconf_ohci->basead); |
| 114 | writel(phys_base + EHCI_OFFSET, &ahb_pciconf_ehci->basead); |
| 115 | writel(SERREN | PERREN | MASTEREN | MEMEN, |
| 116 | &ahb_pciconf_ohci->cmnd_sts); |
| 117 | writel(SERREN | PERREN | MASTEREN | MEMEN, |
| 118 | &ahb_pciconf_ehci->cmnd_sts); |
| 119 | |
| 120 | /* Enable PCI interrupt */ |
| 121 | setbits_le32(&ahbcom_pci->pci_int_enable, |
| 122 | USBH_PMEEN | USBH_INTBEN | USBH_INTAEN); |
| 123 | |
| 124 | *hccr = (struct ehci_hccr *)((uint32_t)&rehci->hciversion); |
| 125 | cap_base = ehci_readl(&(*hccr)->cr_capbase); |
| 126 | *hcor = (struct ehci_hcor *)((uint32_t)*hccr + HC_LENGTH(cap_base)); |
| 127 | |
| 128 | return 0; |
| 129 | } |