blob: 21102d3c14d2c165f58780b5559c4da412653544 [file] [log] [blame]
Adam Ford14879032020-05-03 08:11:33 -05001/* SPDX-License-Identifier: GPL-2.0+ */
2/*
3 * Copyright 2020 Compass Electronics Group, LLC
4 */
5
6#ifndef __IMX8MM_BEACON_H
7#define __IMX8MM_BEACON_H
8
9#include <linux/sizes.h>
10#include <asm/arch/imx-regs.h>
11
12#ifdef CONFIG_SECURE_BOOT
13#define CONFIG_CSF_SIZE SZ_8K
14#endif
15
16#define CONFIG_SPL_MAX_SIZE (148 * 1024)
17#define CONFIG_SYS_MONITOR_LEN SZ_512K
18#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
19#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300
20#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
21#define CONFIG_SYS_UBOOT_BASE \
22 (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
23
24#ifdef CONFIG_SPL_BUILD
25#define CONFIG_SPL_STACK 0x920000
26#define CONFIG_SPL_BSS_START_ADDR 0x910000
27#define CONFIG_SPL_BSS_MAX_SIZE SZ_8K /* 8 KB */
28#define CONFIG_SYS_SPL_MALLOC_START 0x42200000
29#define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K /* 512 KB */
30
31/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
32#define CONFIG_MALLOC_F_ADDR 0x930000
33/* For RAW image gives a error info not panic */
34#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
35
36#endif
37
38/* Initial environment variables */
39#define CONFIG_EXTRA_ENV_SETTINGS \
40 "script=boot.scr\0" \
41 "image=Image\0" \
42 "console=ttymxc1,115200\0" \
43 "fdt_addr=0x43000000\0" \
44 "fdt_high=0xffffffffffffffff\0" \
45 "boot_fit=try\0" \
46 "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
47 "initrd_addr=0x43800000\0" \
48 "initrd_high=0xffffffffffffffff\0" \
49 "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
50 "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
51 "finduuid=part uuid mmc ${mmcdev}:2 uuid\0" \
52 "mmcautodetect=yes\0" \
53 "mmcargs=setenv bootargs console=${console},${baudrate}" \
54 " root=PARTUUID=${uuid} rootwait rw ${mtdparts} ${optargs}\0" \
55 "loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr}" \
56 " ${script};\0" \
57 "bootscript=echo Running bootscript from mmc ...; " \
58 "source\0" \
59 "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
60 "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
61 "mmcboot=echo Booting from mmc ...; " \
62 "run finduuid; " \
63 "run mmcargs; " \
64 "if run loadfdt; then " \
65 "booti ${loadaddr} - ${fdt_addr}; " \
66 "else " \
67 "echo WARN: Cannot load the DT; " \
68 "fi; " \
69 "netargs=setenv bootargs console=${console} " \
70 "root=/dev/nfs " \
71 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
72 "netboot=echo Booting from net ...; " \
73 "run netargs; " \
74 "if test ${ip_dyn} = yes; then " \
75 "setenv get_cmd dhcp; " \
76 "else " \
77 "setenv get_cmd tftp; " \
78 "fi; " \
79 "${get_cmd} ${loadaddr} ${image}; " \
80 "if test ${boot_fit} = yes || test ${boot_fit} = try; then " \
81 "bootm ${loadaddr}; " \
82 "else " \
83 "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
84 "booti ${loadaddr} - ${fdt_addr}; " \
85 "else " \
86 "echo WARN: Cannot load the DT; " \
87 "fi; " \
88 "fi;\0"
89
90#define CONFIG_BOOTCOMMAND \
91 "mmc dev ${mmcdev}; if mmc rescan; then " \
92 "if run loadbootscript; then " \
93 "run bootscript; " \
94 "else " \
95 "if run loadimage; then " \
96 "run mmcboot; " \
97 "else run netboot; " \
98 "fi; " \
99 "fi; " \
100 "fi;"
101
102/* Link Definitions */
103#define CONFIG_LOADADDR 0x40480000
104
105#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
106
107#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
108#define CONFIG_SYS_INIT_RAM_SIZE 0x200000
109#define CONFIG_SYS_INIT_SP_OFFSET \
110 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
111#define CONFIG_SYS_INIT_SP_ADDR \
112 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
113
114#define CONFIG_ENV_OVERWRITE
115#define CONFIG_SYS_MMC_ENV_DEV 1 /* USDHC2 */
116
117/* Size of malloc() pool */
118#define CONFIG_SYS_MALLOC_LEN SZ_32M
119
120#define CONFIG_SYS_SDRAM_BASE 0x40000000
121#define PHYS_SDRAM 0x40000000
122#define PHYS_SDRAM_SIZE 0x80000000 /* 2GB DDR */
123
124#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
125#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (PHYS_SDRAM_SIZE >> 1))
126
127#define CONFIG_MXC_UART_BASE UART2_BASE_ADDR
128
129/* Monitor Command Prompt */
130#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
131#define CONFIG_SYS_CBSIZE 2048
132#define CONFIG_SYS_MAXARGS 64
133#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
134#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
135 sizeof(CONFIG_SYS_PROMPT) + 16)
136
137/* USDHC */
138#define CONFIG_SYS_FSL_USDHC_NUM 2
139#define CONFIG_SYS_FSL_ESDHC_ADDR 0
140#define CONFIG_SYS_MMC_IMG_LOAD_PART 1
141
142/* I2C */
143#define CONFIG_SYS_I2C_SPEED 100000
144
145/* FEC*/
146#define CONFIG_ETHPRIME "FEC"
147#define CONFIG_FEC_XCV_TYPE RGMII
148#define CONFIG_FEC_MXC_PHYADDR 0
149#define FEC_QUIRK_ENET_MAC
150#define IMX_FEC_BASE 0x30BE0000
151
152#endif