Vipin KUMAR | 6f2f557 | 2012-05-22 00:15:54 +0000 | [diff] [blame] | 1 | /* |
| 2 | * (C) Copyright 2010 |
| 3 | * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com. |
| 4 | * |
| 5 | * See file CREDITS for list of people who contributed to this |
| 6 | * project. |
| 7 | * |
| 8 | * This program is free software; you can redistribute it and/or |
| 9 | * modify it under the terms of the GNU General Public License as |
| 10 | * published by the Free Software Foundation; either version 2 of |
| 11 | * the License, or (at your option) any later version. |
| 12 | * |
| 13 | * This program is distributed in the hope that it will be useful, |
| 14 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 15 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 16 | * GNU General Public License for more details. |
| 17 | * |
| 18 | * You should have received a copy of the GNU General Public License |
| 19 | * along with this program; if not, write to the Free Software |
| 20 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| 21 | * MA 02111-1307 USA |
| 22 | */ |
| 23 | |
| 24 | #ifndef __FSMC_NAND_H__ |
| 25 | #define __FSMC_NAND_H__ |
| 26 | |
| 27 | #include <linux/mtd/nand.h> |
| 28 | |
| 29 | struct fsmc_regs { |
| 30 | u32 ctrl; /* 0x00 */ |
| 31 | u8 reserved_1[0x40 - 0x04]; |
| 32 | u32 pc; /* 0x40 */ |
| 33 | u32 sts; /* 0x44 */ |
| 34 | u32 comm; /* 0x48 */ |
| 35 | u32 attrib; /* 0x4c */ |
| 36 | u32 ioata; /* 0x50 */ |
| 37 | u32 ecc1; /* 0x54 */ |
| 38 | u32 ecc2; /* 0x58 */ |
| 39 | u32 ecc3; /* 0x5c */ |
| 40 | u8 reserved_2[0xfe0 - 0x60]; |
| 41 | u32 peripid0; /* 0xfe0 */ |
| 42 | u32 peripid1; /* 0xfe4 */ |
| 43 | u32 peripid2; /* 0xfe8 */ |
| 44 | u32 peripid3; /* 0xfec */ |
| 45 | u32 pcellid0; /* 0xff0 */ |
| 46 | u32 pcellid1; /* 0xff4 */ |
| 47 | u32 pcellid2; /* 0xff8 */ |
| 48 | u32 pcellid3; /* 0xffc */ |
| 49 | }; |
| 50 | |
| 51 | /* ctrl register definitions */ |
| 52 | #define FSMC_WP (1 << 7) |
| 53 | |
| 54 | /* pc register definitions */ |
| 55 | #define FSMC_RESET (1 << 0) |
| 56 | #define FSMC_WAITON (1 << 1) |
| 57 | #define FSMC_ENABLE (1 << 2) |
| 58 | #define FSMC_DEVTYPE_NAND (1 << 3) |
| 59 | #define FSMC_DEVWID_8 (0 << 4) |
| 60 | #define FSMC_DEVWID_16 (1 << 4) |
| 61 | #define FSMC_ECCEN (1 << 6) |
| 62 | #define FSMC_ECCPLEN_512 (0 << 7) |
| 63 | #define FSMC_ECCPLEN_256 (1 << 7) |
| 64 | #define FSMC_TCLR_1 (1 << 9) |
| 65 | #define FSMC_TAR_1 (1 << 13) |
| 66 | |
| 67 | /* sts register definitions */ |
| 68 | #define FSMC_CODE_RDY (1 << 15) |
| 69 | |
| 70 | /* comm register definitions */ |
| 71 | #define FSMC_TSET_0 (0 << 0) |
| 72 | #define FSMC_TWAIT_6 (6 << 8) |
| 73 | #define FSMC_THOLD_4 (4 << 16) |
| 74 | #define FSMC_THIZ_1 (1 << 24) |
| 75 | |
| 76 | /* peripid2 register definitions */ |
| 77 | #define FSMC_REVISION_MSK (0xf) |
| 78 | #define FSMC_REVISION_SHFT (0x4) |
| 79 | |
| 80 | #define FSMC_VER8 0x8 |
| 81 | |
| 82 | /* |
| 83 | * There are 13 bytes of ecc for every 512 byte block and it has to be read |
| 84 | * consecutively and immediately after the 512 byte data block for hardware to |
| 85 | * generate the error bit offsets |
| 86 | * Managing the ecc bytes in the following way is easier. This way is similar to |
| 87 | * oobfree structure maintained already in u-boot nand driver |
| 88 | */ |
| 89 | #define FSMC_MAX_ECCPLACE_ENTRIES 32 |
| 90 | |
| 91 | struct fsmc_nand_eccplace { |
| 92 | u32 offset; |
| 93 | u32 length; |
| 94 | }; |
| 95 | |
| 96 | struct fsmc_eccplace { |
| 97 | struct fsmc_nand_eccplace eccplace[FSMC_MAX_ECCPLACE_ENTRIES]; |
| 98 | }; |
| 99 | |
| 100 | extern int fsmc_nand_init(struct nand_chip *nand); |
| 101 | #endif |