Thomas Chou | 7bb1b9b | 2010-04-20 12:49:52 +0800 | [diff] [blame] | 1 | /* |
| 2 | * Altera 10/100/1000 triple speed ethernet mac driver |
| 3 | * |
| 4 | * Copyright (C) 2008 Altera Corporation. |
| 5 | * Copyright (C) 2010 Thomas Chou <thomas@wytron.com.tw> |
| 6 | * |
| 7 | * This program is free software; you can redistribute it and/or modify |
| 8 | * it under the terms of the GNU General Public License version 2 as |
| 9 | * published by the Free Software Foundation. |
| 10 | */ |
| 11 | #include <config.h> |
| 12 | #include <common.h> |
| 13 | #include <malloc.h> |
| 14 | #include <net.h> |
| 15 | #include <command.h> |
| 16 | #include <asm/cache.h> |
| 17 | #include <asm/dma-mapping.h> |
| 18 | #include <miiphy.h> |
| 19 | #include "altera_tse.h" |
| 20 | |
| 21 | /* sgdma debug - print descriptor */ |
| 22 | static void alt_sgdma_print_desc(volatile struct alt_sgdma_descriptor *desc) |
| 23 | { |
| 24 | debug("SGDMA DEBUG :\n"); |
| 25 | debug("desc->source : 0x%x \n", (unsigned int)desc->source); |
| 26 | debug("desc->destination : 0x%x \n", (unsigned int)desc->destination); |
| 27 | debug("desc->next : 0x%x \n", (unsigned int)desc->next); |
| 28 | debug("desc->source_pad : 0x%x \n", (unsigned int)desc->source_pad); |
| 29 | debug("desc->destination_pad : 0x%x \n", |
| 30 | (unsigned int)desc->destination_pad); |
| 31 | debug("desc->next_pad : 0x%x \n", (unsigned int)desc->next_pad); |
| 32 | debug("desc->bytes_to_transfer : 0x%x \n", |
| 33 | (unsigned int)desc->bytes_to_transfer); |
| 34 | debug("desc->actual_bytes_transferred : 0x%x \n", |
| 35 | (unsigned int)desc->actual_bytes_transferred); |
| 36 | debug("desc->descriptor_status : 0x%x \n", |
| 37 | (unsigned int)desc->descriptor_status); |
| 38 | debug("desc->descriptor_control : 0x%x \n", |
| 39 | (unsigned int)desc->descriptor_control); |
| 40 | } |
| 41 | |
| 42 | /* This is a generic routine that the SGDMA mode-specific routines |
| 43 | * call to populate a descriptor. |
| 44 | * arg1 :pointer to first SGDMA descriptor. |
| 45 | * arg2 :pointer to next SGDMA descriptor. |
| 46 | * arg3 :Address to where data to be written. |
| 47 | * arg4 :Address from where data to be read. |
| 48 | * arg5 :no of byte to transaction. |
| 49 | * arg6 :variable indicating to generate start of packet or not |
| 50 | * arg7 :read fixed |
| 51 | * arg8 :write fixed |
| 52 | * arg9 :read burst |
| 53 | * arg10 :write burst |
| 54 | * arg11 :atlantic_channel number |
| 55 | */ |
| 56 | static void alt_sgdma_construct_descriptor_burst( |
| 57 | volatile struct alt_sgdma_descriptor *desc, |
| 58 | volatile struct alt_sgdma_descriptor *next, |
| 59 | unsigned int *read_addr, |
| 60 | unsigned int *write_addr, |
| 61 | unsigned short length_or_eop, |
| 62 | int generate_eop, |
| 63 | int read_fixed, |
| 64 | int write_fixed_or_sop, |
| 65 | int read_burst, |
| 66 | int write_burst, |
| 67 | unsigned char atlantic_channel) |
| 68 | { |
| 69 | /* |
| 70 | * Mark the "next" descriptor as "not" owned by hardware. This prevents |
| 71 | * The SGDMA controller from continuing to process the chain. This is |
| 72 | * done as a single IO write to bypass cache, without flushing |
| 73 | * the entire descriptor, since only the 8-bit descriptor status must |
| 74 | * be flushed. |
| 75 | */ |
| 76 | if (!next) |
| 77 | debug("Next descriptor not defined!!\n"); |
| 78 | |
| 79 | next->descriptor_control = (next->descriptor_control & |
| 80 | ~ALT_SGDMA_DESCRIPTOR_CONTROL_OWNED_BY_HW_MSK); |
| 81 | |
| 82 | desc->source = (unsigned int *)((unsigned int)read_addr & 0x1FFFFFFF); |
| 83 | desc->destination = |
| 84 | (unsigned int *)((unsigned int)write_addr & 0x1FFFFFFF); |
| 85 | desc->next = (unsigned int *)((unsigned int)next & 0x1FFFFFFF); |
| 86 | desc->source_pad = 0x0; |
| 87 | desc->destination_pad = 0x0; |
| 88 | desc->next_pad = 0x0; |
| 89 | desc->bytes_to_transfer = length_or_eop; |
| 90 | desc->actual_bytes_transferred = 0; |
| 91 | desc->descriptor_status = 0x0; |
| 92 | |
| 93 | /* SGDMA burst not currently supported */ |
| 94 | desc->read_burst = 0; |
| 95 | desc->write_burst = 0; |
| 96 | |
| 97 | /* |
| 98 | * Set the descriptor control block as follows: |
| 99 | * - Set "owned by hardware" bit |
| 100 | * - Optionally set "generate EOP" bit |
| 101 | * - Optionally set the "read from fixed address" bit |
| 102 | * - Optionally set the "write to fixed address bit (which serves |
| 103 | * serves as a "generate SOP" control bit in memory-to-stream mode). |
| 104 | * - Set the 4-bit atlantic channel, if specified |
| 105 | * |
| 106 | * Note this step is performed after all other descriptor information |
| 107 | * has been filled out so that, if the controller already happens to be |
| 108 | * pointing at this descriptor, it will not run (via the "owned by |
| 109 | * hardware" bit) until all other descriptor has been set up. |
| 110 | */ |
| 111 | |
| 112 | desc->descriptor_control = |
| 113 | ((ALT_SGDMA_DESCRIPTOR_CONTROL_OWNED_BY_HW_MSK) | |
| 114 | (generate_eop ? |
| 115 | ALT_SGDMA_DESCRIPTOR_CONTROL_GENERATE_EOP_MSK : 0x0) | |
| 116 | (read_fixed ? |
| 117 | ALT_SGDMA_DESCRIPTOR_CONTROL_READ_FIXED_ADDRESS_MSK : 0x0) | |
| 118 | (write_fixed_or_sop ? |
| 119 | ALT_SGDMA_DESCRIPTOR_CONTROL_WRITE_FIXED_ADDRESS_MSK : 0x0) | |
| 120 | (atlantic_channel ? ((atlantic_channel & 0x0F) << 3) : 0) |
| 121 | ); |
| 122 | } |
| 123 | |
| 124 | static int alt_sgdma_do_sync_transfer(volatile struct alt_sgdma_registers *dev, |
| 125 | volatile struct alt_sgdma_descriptor *desc) |
| 126 | { |
| 127 | unsigned int status; |
| 128 | int counter = 0; |
| 129 | |
| 130 | /* Wait for any pending transfers to complete */ |
| 131 | alt_sgdma_print_desc(desc); |
| 132 | status = dev->status; |
| 133 | |
| 134 | counter = 0; |
| 135 | while (dev->status & ALT_SGDMA_STATUS_BUSY_MSK) { |
| 136 | if (counter++ > ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR) |
| 137 | break; |
| 138 | } |
| 139 | |
| 140 | if (counter >= ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR) |
| 141 | debug("Timeout waiting sgdma in do sync!\n"); |
| 142 | |
| 143 | /* |
| 144 | * Clear any (previous) status register information |
| 145 | * that might occlude our error checking later. |
| 146 | */ |
| 147 | dev->status = 0xFF; |
| 148 | |
| 149 | /* Point the controller at the descriptor */ |
| 150 | dev->next_descriptor_pointer = (unsigned int)desc & 0x1FFFFFFF; |
| 151 | debug("next desc in sgdma 0x%x\n", |
| 152 | (unsigned int)dev->next_descriptor_pointer); |
| 153 | |
| 154 | /* |
| 155 | * Set up SGDMA controller to: |
| 156 | * - Disable interrupt generation |
| 157 | * - Run once a valid descriptor is written to controller |
| 158 | * - Stop on an error with any particular descriptor |
| 159 | */ |
| 160 | dev->control = (ALT_SGDMA_CONTROL_RUN_MSK | |
| 161 | ALT_SGDMA_CONTROL_STOP_DMA_ER_MSK); |
| 162 | |
| 163 | /* Wait for the descriptor (chain) to complete */ |
| 164 | status = dev->status; |
| 165 | debug("wait for sgdma...."); |
| 166 | while (dev->status & ALT_SGDMA_STATUS_BUSY_MSK) |
| 167 | ; |
| 168 | debug("done\n"); |
| 169 | |
| 170 | /* Clear Run */ |
| 171 | dev->control = (dev->control & (~ALT_SGDMA_CONTROL_RUN_MSK)); |
| 172 | |
| 173 | /* Get & clear status register contents */ |
| 174 | status = dev->status; |
| 175 | dev->status = 0xFF; |
| 176 | |
| 177 | /* we really should check if the transfer completes properly */ |
| 178 | debug("tx sgdma status = 0x%x", status); |
| 179 | return 0; |
| 180 | } |
| 181 | |
| 182 | static int alt_sgdma_do_async_transfer(volatile struct alt_sgdma_registers *dev, |
| 183 | volatile struct alt_sgdma_descriptor *desc) |
| 184 | { |
| 185 | unsigned int status; |
| 186 | int counter = 0; |
| 187 | |
| 188 | /* Wait for any pending transfers to complete */ |
| 189 | alt_sgdma_print_desc(desc); |
| 190 | status = dev->status; |
| 191 | |
| 192 | counter = 0; |
| 193 | while (dev->status & ALT_SGDMA_STATUS_BUSY_MSK) { |
| 194 | if (counter++ > ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR) |
| 195 | break; |
| 196 | } |
| 197 | |
| 198 | if (counter >= ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR) |
| 199 | debug("Timeout waiting sgdma in do async!\n"); |
| 200 | |
| 201 | /* |
Joachim Foerster | fc883c2 | 2011-10-25 22:39:54 +0000 | [diff] [blame] | 202 | * Clear the RUN bit in the control register. This is needed |
| 203 | * to restart the SGDMA engine later on. |
| 204 | */ |
| 205 | dev->control = 0; |
| 206 | |
| 207 | /* |
Thomas Chou | 7bb1b9b | 2010-04-20 12:49:52 +0800 | [diff] [blame] | 208 | * Clear any (previous) status register information |
| 209 | * that might occlude our error checking later. |
| 210 | */ |
| 211 | dev->status = 0xFF; |
| 212 | |
| 213 | /* Point the controller at the descriptor */ |
| 214 | dev->next_descriptor_pointer = (unsigned int)desc & 0x1FFFFFFF; |
| 215 | |
| 216 | /* |
| 217 | * Set up SGDMA controller to: |
| 218 | * - Disable interrupt generation |
| 219 | * - Run once a valid descriptor is written to controller |
| 220 | * - Stop on an error with any particular descriptor |
| 221 | */ |
| 222 | dev->control = (ALT_SGDMA_CONTROL_RUN_MSK | |
| 223 | ALT_SGDMA_CONTROL_STOP_DMA_ER_MSK); |
| 224 | |
| 225 | /* we really should check if the transfer completes properly */ |
| 226 | return 0; |
| 227 | } |
| 228 | |
| 229 | /* u-boot interface */ |
| 230 | static int tse_adjust_link(struct altera_tse_priv *priv) |
| 231 | { |
| 232 | unsigned int refvar; |
| 233 | |
| 234 | refvar = priv->mac_dev->command_config.image; |
| 235 | |
| 236 | if (!(priv->duplexity)) |
| 237 | refvar |= ALTERA_TSE_CMD_HD_ENA_MSK; |
| 238 | else |
| 239 | refvar &= ~ALTERA_TSE_CMD_HD_ENA_MSK; |
| 240 | |
| 241 | switch (priv->speed) { |
| 242 | case 1000: |
| 243 | refvar |= ALTERA_TSE_CMD_ETH_SPEED_MSK; |
| 244 | refvar &= ~ALTERA_TSE_CMD_ENA_10_MSK; |
| 245 | break; |
| 246 | case 100: |
| 247 | refvar &= ~ALTERA_TSE_CMD_ETH_SPEED_MSK; |
| 248 | refvar &= ~ALTERA_TSE_CMD_ENA_10_MSK; |
| 249 | break; |
| 250 | case 10: |
| 251 | refvar &= ~ALTERA_TSE_CMD_ETH_SPEED_MSK; |
| 252 | refvar |= ALTERA_TSE_CMD_ENA_10_MSK; |
| 253 | break; |
| 254 | } |
| 255 | priv->mac_dev->command_config.image = refvar; |
| 256 | |
| 257 | return 0; |
| 258 | } |
| 259 | |
Joe Hershberger | e4e0488 | 2012-05-22 18:36:19 +0000 | [diff] [blame] | 260 | static int tse_eth_send(struct eth_device *dev, void *packet, int length) |
Thomas Chou | 7bb1b9b | 2010-04-20 12:49:52 +0800 | [diff] [blame] | 261 | { |
| 262 | struct altera_tse_priv *priv = dev->priv; |
| 263 | volatile struct alt_sgdma_registers *tx_sgdma = priv->sgdma_tx; |
| 264 | volatile struct alt_sgdma_descriptor *tx_desc = |
| 265 | (volatile struct alt_sgdma_descriptor *)priv->tx_desc; |
| 266 | |
| 267 | volatile struct alt_sgdma_descriptor *tx_desc_cur = |
| 268 | (volatile struct alt_sgdma_descriptor *)&tx_desc[0]; |
| 269 | |
Stefan Kristiansson | ea45ea2 | 2011-11-04 02:38:07 +0000 | [diff] [blame] | 270 | flush_dcache_range((unsigned long)packet, |
| 271 | (unsigned long)packet + length); |
Thomas Chou | 7bb1b9b | 2010-04-20 12:49:52 +0800 | [diff] [blame] | 272 | alt_sgdma_construct_descriptor_burst( |
| 273 | (volatile struct alt_sgdma_descriptor *)&tx_desc[0], |
| 274 | (volatile struct alt_sgdma_descriptor *)&tx_desc[1], |
| 275 | (unsigned int *)packet, /* read addr */ |
| 276 | (unsigned int *)0, |
| 277 | length, /* length or EOP ,will change for each tx */ |
| 278 | 0x1, /* gen eop */ |
| 279 | 0x0, /* read fixed */ |
| 280 | 0x1, /* write fixed or sop */ |
| 281 | 0x0, /* read burst */ |
| 282 | 0x0, /* write burst */ |
| 283 | 0x0 /* channel */ |
| 284 | ); |
| 285 | debug("TX Packet @ 0x%x,0x%x bytes", (unsigned int)packet, length); |
| 286 | |
| 287 | /* send the packet */ |
| 288 | debug("sending packet\n"); |
| 289 | alt_sgdma_do_sync_transfer(tx_sgdma, tx_desc_cur); |
| 290 | debug("sent %d bytes\n", tx_desc_cur->actual_bytes_transferred); |
| 291 | return tx_desc_cur->actual_bytes_transferred; |
| 292 | } |
| 293 | |
| 294 | static int tse_eth_rx(struct eth_device *dev) |
| 295 | { |
| 296 | int packet_length = 0; |
| 297 | struct altera_tse_priv *priv = dev->priv; |
| 298 | volatile struct alt_sgdma_descriptor *rx_desc = |
| 299 | (volatile struct alt_sgdma_descriptor *)priv->rx_desc; |
| 300 | volatile struct alt_sgdma_descriptor *rx_desc_cur = &rx_desc[0]; |
| 301 | |
| 302 | if (rx_desc_cur->descriptor_status & |
| 303 | ALT_SGDMA_DESCRIPTOR_STATUS_TERMINATED_BY_EOP_MSK) { |
| 304 | debug("got packet\n"); |
| 305 | packet_length = rx_desc->actual_bytes_transferred; |
| 306 | NetReceive(NetRxPackets[0], packet_length); |
| 307 | |
| 308 | /* start descriptor again */ |
Stefan Kristiansson | ea45ea2 | 2011-11-04 02:38:07 +0000 | [diff] [blame] | 309 | flush_dcache_range((unsigned long)(NetRxPackets[0]), |
| 310 | (unsigned long)(NetRxPackets[0]) + PKTSIZE_ALIGN); |
Thomas Chou | 7bb1b9b | 2010-04-20 12:49:52 +0800 | [diff] [blame] | 311 | alt_sgdma_construct_descriptor_burst( |
| 312 | (volatile struct alt_sgdma_descriptor *)&rx_desc[0], |
| 313 | (volatile struct alt_sgdma_descriptor *)&rx_desc[1], |
| 314 | (unsigned int)0x0, /* read addr */ |
| 315 | (unsigned int *)NetRxPackets[0], |
| 316 | 0x0, /* length or EOP */ |
| 317 | 0x0, /* gen eop */ |
| 318 | 0x0, /* read fixed */ |
| 319 | 0x0, /* write fixed or sop */ |
| 320 | 0x0, /* read burst */ |
| 321 | 0x0, /* write burst */ |
| 322 | 0x0 /* channel */ |
| 323 | ); |
| 324 | |
| 325 | /* setup the sgdma */ |
| 326 | alt_sgdma_do_async_transfer(priv->sgdma_rx, &rx_desc[0]); |
Joachim Foerster | 384a819 | 2011-10-17 05:24:46 +0000 | [diff] [blame] | 327 | |
| 328 | return packet_length; |
Thomas Chou | 7bb1b9b | 2010-04-20 12:49:52 +0800 | [diff] [blame] | 329 | } |
| 330 | |
| 331 | return -1; |
| 332 | } |
| 333 | |
| 334 | static void tse_eth_halt(struct eth_device *dev) |
| 335 | { |
| 336 | /* don't do anything! */ |
| 337 | /* this gets called after each uboot */ |
| 338 | /* network command. don't need to reset the thing all of the time */ |
| 339 | } |
| 340 | |
| 341 | static void tse_eth_reset(struct eth_device *dev) |
| 342 | { |
| 343 | /* stop sgdmas, disable tse receive */ |
| 344 | struct altera_tse_priv *priv = dev->priv; |
| 345 | volatile struct alt_tse_mac *mac_dev = priv->mac_dev; |
| 346 | volatile struct alt_sgdma_registers *rx_sgdma = priv->sgdma_rx; |
| 347 | volatile struct alt_sgdma_registers *tx_sgdma = priv->sgdma_tx; |
| 348 | int counter; |
| 349 | volatile struct alt_sgdma_descriptor *rx_desc = |
| 350 | (volatile struct alt_sgdma_descriptor *)&priv->rx_desc[0]; |
| 351 | |
| 352 | /* clear rx desc & wait for sgdma to complete */ |
| 353 | rx_desc->descriptor_control = 0; |
| 354 | rx_sgdma->control = 0; |
| 355 | counter = 0; |
| 356 | while (rx_sgdma->status & ALT_SGDMA_STATUS_BUSY_MSK) { |
| 357 | if (counter++ > ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR) |
| 358 | break; |
| 359 | } |
| 360 | |
| 361 | if (counter >= ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR) { |
| 362 | debug("Timeout waiting for rx sgdma!\n"); |
Joachim Foerster | 953cc0c | 2011-10-17 05:24:43 +0000 | [diff] [blame] | 363 | rx_sgdma->control = ALT_SGDMA_CONTROL_SOFTWARERESET_MSK; |
| 364 | rx_sgdma->control = ALT_SGDMA_CONTROL_SOFTWARERESET_MSK; |
Thomas Chou | 7bb1b9b | 2010-04-20 12:49:52 +0800 | [diff] [blame] | 365 | } |
| 366 | |
| 367 | counter = 0; |
| 368 | tx_sgdma->control = 0; |
| 369 | while (tx_sgdma->status & ALT_SGDMA_STATUS_BUSY_MSK) { |
| 370 | if (counter++ > ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR) |
| 371 | break; |
| 372 | } |
| 373 | |
| 374 | if (counter >= ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR) { |
| 375 | debug("Timeout waiting for tx sgdma!\n"); |
Joachim Foerster | 953cc0c | 2011-10-17 05:24:43 +0000 | [diff] [blame] | 376 | tx_sgdma->control = ALT_SGDMA_CONTROL_SOFTWARERESET_MSK; |
| 377 | tx_sgdma->control = ALT_SGDMA_CONTROL_SOFTWARERESET_MSK; |
Thomas Chou | 7bb1b9b | 2010-04-20 12:49:52 +0800 | [diff] [blame] | 378 | } |
| 379 | /* reset the mac */ |
| 380 | mac_dev->command_config.bits.transmit_enable = 1; |
| 381 | mac_dev->command_config.bits.receive_enable = 1; |
| 382 | mac_dev->command_config.bits.software_reset = 1; |
| 383 | |
| 384 | counter = 0; |
| 385 | while (mac_dev->command_config.bits.software_reset) { |
| 386 | if (counter++ > ALT_TSE_SW_RESET_WATCHDOG_CNTR) |
| 387 | break; |
| 388 | } |
| 389 | |
| 390 | if (counter >= ALT_TSE_SW_RESET_WATCHDOG_CNTR) |
| 391 | debug("TSEMAC SW reset bit never cleared!\n"); |
| 392 | } |
| 393 | |
| 394 | static int tse_mdio_read(struct altera_tse_priv *priv, unsigned int regnum) |
| 395 | { |
| 396 | volatile struct alt_tse_mac *mac_dev; |
| 397 | unsigned int *mdio_regs; |
| 398 | unsigned int data; |
| 399 | u16 value; |
| 400 | |
| 401 | mac_dev = priv->mac_dev; |
| 402 | |
| 403 | /* set mdio address */ |
| 404 | mac_dev->mdio_phy1_addr = priv->phyaddr; |
| 405 | mdio_regs = (unsigned int *)&mac_dev->mdio_phy1; |
| 406 | |
| 407 | /* get the data */ |
| 408 | data = mdio_regs[regnum]; |
| 409 | |
| 410 | value = data & 0xffff; |
| 411 | |
| 412 | return value; |
| 413 | } |
| 414 | |
| 415 | static int tse_mdio_write(struct altera_tse_priv *priv, unsigned int regnum, |
| 416 | unsigned int value) |
| 417 | { |
| 418 | volatile struct alt_tse_mac *mac_dev; |
| 419 | unsigned int *mdio_regs; |
| 420 | unsigned int data; |
| 421 | |
| 422 | mac_dev = priv->mac_dev; |
| 423 | |
| 424 | /* set mdio address */ |
| 425 | mac_dev->mdio_phy1_addr = priv->phyaddr; |
| 426 | mdio_regs = (unsigned int *)&mac_dev->mdio_phy1; |
| 427 | |
| 428 | /* get the data */ |
| 429 | data = (unsigned int)value; |
| 430 | |
| 431 | mdio_regs[regnum] = data; |
| 432 | |
| 433 | return 0; |
| 434 | } |
| 435 | |
| 436 | /* MDIO access to phy */ |
| 437 | #if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) && !defined(BITBANGMII) |
Mike Frysinger | 5ff5fdb | 2010-07-27 18:35:08 -0400 | [diff] [blame] | 438 | static int altera_tse_miiphy_write(const char *devname, unsigned char addr, |
Thomas Chou | 7bb1b9b | 2010-04-20 12:49:52 +0800 | [diff] [blame] | 439 | unsigned char reg, unsigned short value) |
| 440 | { |
| 441 | struct eth_device *dev; |
| 442 | struct altera_tse_priv *priv; |
| 443 | dev = eth_get_dev_by_name(devname); |
| 444 | priv = dev->priv; |
| 445 | |
| 446 | tse_mdio_write(priv, (uint) reg, (uint) value); |
| 447 | |
| 448 | return 0; |
| 449 | } |
| 450 | |
Mike Frysinger | 5ff5fdb | 2010-07-27 18:35:08 -0400 | [diff] [blame] | 451 | static int altera_tse_miiphy_read(const char *devname, unsigned char addr, |
Thomas Chou | 7bb1b9b | 2010-04-20 12:49:52 +0800 | [diff] [blame] | 452 | unsigned char reg, unsigned short *value) |
| 453 | { |
| 454 | struct eth_device *dev; |
| 455 | struct altera_tse_priv *priv; |
| 456 | volatile struct alt_tse_mac *mac_dev; |
| 457 | unsigned int *mdio_regs; |
| 458 | |
| 459 | dev = eth_get_dev_by_name(devname); |
| 460 | priv = dev->priv; |
| 461 | |
| 462 | mac_dev = priv->mac_dev; |
| 463 | mac_dev->mdio_phy1_addr = (int)addr; |
| 464 | mdio_regs = (unsigned int *)&mac_dev->mdio_phy1; |
| 465 | |
| 466 | *value = 0xffff & mdio_regs[reg]; |
| 467 | |
| 468 | return 0; |
| 469 | |
| 470 | } |
| 471 | #endif |
| 472 | |
| 473 | /* |
| 474 | * Also copied from tsec.c |
| 475 | */ |
| 476 | /* Parse the status register for link, and then do |
| 477 | * auto-negotiation |
| 478 | */ |
| 479 | static uint mii_parse_sr(uint mii_reg, struct altera_tse_priv *priv) |
| 480 | { |
| 481 | /* |
| 482 | * Wait if the link is up, and autonegotiation is in progress |
| 483 | * (ie - we're capable and it's not done) |
| 484 | */ |
| 485 | mii_reg = tse_mdio_read(priv, MIIM_STATUS); |
| 486 | |
Mike Frysinger | d63ee71 | 2010-12-23 15:40:12 -0500 | [diff] [blame] | 487 | if (!(mii_reg & MIIM_STATUS_LINK) && (mii_reg & BMSR_ANEGCAPABLE) |
| 488 | && !(mii_reg & BMSR_ANEGCOMPLETE)) { |
Thomas Chou | 7bb1b9b | 2010-04-20 12:49:52 +0800 | [diff] [blame] | 489 | int i = 0; |
| 490 | |
| 491 | puts("Waiting for PHY auto negotiation to complete"); |
Mike Frysinger | d63ee71 | 2010-12-23 15:40:12 -0500 | [diff] [blame] | 492 | while (!(mii_reg & BMSR_ANEGCOMPLETE)) { |
Thomas Chou | 7bb1b9b | 2010-04-20 12:49:52 +0800 | [diff] [blame] | 493 | /* |
| 494 | * Timeout reached ? |
| 495 | */ |
| 496 | if (i > PHY_AUTONEGOTIATE_TIMEOUT) { |
| 497 | puts(" TIMEOUT !\n"); |
| 498 | priv->link = 0; |
| 499 | return 0; |
| 500 | } |
| 501 | |
| 502 | if ((i++ % 1000) == 0) |
| 503 | putc('.'); |
| 504 | udelay(1000); /* 1 ms */ |
| 505 | mii_reg = tse_mdio_read(priv, MIIM_STATUS); |
| 506 | } |
| 507 | puts(" done\n"); |
| 508 | priv->link = 1; |
| 509 | udelay(500000); /* another 500 ms (results in faster booting) */ |
| 510 | } else { |
| 511 | if (mii_reg & MIIM_STATUS_LINK) { |
| 512 | debug("Link is up\n"); |
| 513 | priv->link = 1; |
| 514 | } else { |
| 515 | debug("Link is down\n"); |
| 516 | priv->link = 0; |
| 517 | } |
| 518 | } |
| 519 | |
| 520 | return 0; |
| 521 | } |
| 522 | |
| 523 | /* Parse the 88E1011's status register for speed and duplex |
| 524 | * information |
| 525 | */ |
| 526 | static uint mii_parse_88E1011_psr(uint mii_reg, struct altera_tse_priv *priv) |
| 527 | { |
| 528 | uint speed; |
| 529 | |
| 530 | mii_reg = tse_mdio_read(priv, MIIM_88E1011_PHY_STATUS); |
| 531 | |
| 532 | if ((mii_reg & MIIM_88E1011_PHYSTAT_LINK) && |
| 533 | !(mii_reg & MIIM_88E1011_PHYSTAT_SPDDONE)) { |
| 534 | int i = 0; |
| 535 | |
| 536 | puts("Waiting for PHY realtime link"); |
| 537 | while (!(mii_reg & MIIM_88E1011_PHYSTAT_SPDDONE)) { |
| 538 | /* Timeout reached ? */ |
| 539 | if (i > PHY_AUTONEGOTIATE_TIMEOUT) { |
| 540 | puts(" TIMEOUT !\n"); |
| 541 | priv->link = 0; |
| 542 | break; |
| 543 | } |
| 544 | |
| 545 | if ((i++ == 1000) == 0) { |
| 546 | i = 0; |
| 547 | puts("."); |
| 548 | } |
| 549 | udelay(1000); /* 1 ms */ |
| 550 | mii_reg = tse_mdio_read(priv, MIIM_88E1011_PHY_STATUS); |
| 551 | } |
| 552 | puts(" done\n"); |
| 553 | udelay(500000); /* another 500 ms (results in faster booting) */ |
| 554 | } else { |
| 555 | if (mii_reg & MIIM_88E1011_PHYSTAT_LINK) |
| 556 | priv->link = 1; |
| 557 | else |
| 558 | priv->link = 0; |
| 559 | } |
| 560 | |
| 561 | if (mii_reg & MIIM_88E1011_PHYSTAT_DUPLEX) |
| 562 | priv->duplexity = 1; |
| 563 | else |
| 564 | priv->duplexity = 0; |
| 565 | |
| 566 | speed = (mii_reg & MIIM_88E1011_PHYSTAT_SPEED); |
| 567 | |
| 568 | switch (speed) { |
| 569 | case MIIM_88E1011_PHYSTAT_GBIT: |
| 570 | priv->speed = 1000; |
| 571 | debug("PHY Speed is 1000Mbit\n"); |
| 572 | break; |
| 573 | case MIIM_88E1011_PHYSTAT_100: |
| 574 | debug("PHY Speed is 100Mbit\n"); |
| 575 | priv->speed = 100; |
| 576 | break; |
| 577 | default: |
| 578 | debug("PHY Speed is 10Mbit\n"); |
| 579 | priv->speed = 10; |
| 580 | } |
| 581 | |
| 582 | return 0; |
| 583 | } |
| 584 | |
| 585 | static uint mii_m88e1111s_setmode_sr(uint mii_reg, struct altera_tse_priv *priv) |
| 586 | { |
| 587 | uint mii_data = tse_mdio_read(priv, mii_reg); |
| 588 | mii_data &= 0xfff0; |
Joachim Foerster | 7ce9929 | 2011-10-25 22:39:57 +0000 | [diff] [blame] | 589 | if ((priv->flags >= 1) && (priv->flags <= 4)) |
| 590 | mii_data |= 0xb; |
| 591 | else if (priv->flags == 5) |
| 592 | mii_data |= 0x4; |
| 593 | |
Thomas Chou | 7bb1b9b | 2010-04-20 12:49:52 +0800 | [diff] [blame] | 594 | return mii_data; |
| 595 | } |
| 596 | |
| 597 | static uint mii_m88e1111s_setmode_cr(uint mii_reg, struct altera_tse_priv *priv) |
| 598 | { |
| 599 | uint mii_data = tse_mdio_read(priv, mii_reg); |
| 600 | mii_data &= ~0x82; |
Joachim Foerster | 7ce9929 | 2011-10-25 22:39:57 +0000 | [diff] [blame] | 601 | if ((priv->flags >= 1) && (priv->flags <= 4)) |
| 602 | mii_data |= 0x82; |
| 603 | |
Thomas Chou | 7bb1b9b | 2010-04-20 12:49:52 +0800 | [diff] [blame] | 604 | return mii_data; |
| 605 | } |
| 606 | |
| 607 | /* |
| 608 | * Returns which value to write to the control register. |
| 609 | * For 10/100, the value is slightly different |
| 610 | */ |
| 611 | static uint mii_cr_init(uint mii_reg, struct altera_tse_priv *priv) |
| 612 | { |
| 613 | return MIIM_CONTROL_INIT; |
| 614 | } |
| 615 | |
| 616 | /* |
| 617 | * PHY & MDIO code |
| 618 | * Need to add SGMII stuff |
| 619 | * |
| 620 | */ |
| 621 | |
| 622 | static struct phy_info phy_info_M88E1111S = { |
| 623 | 0x01410cc, |
| 624 | "Marvell 88E1111S", |
| 625 | 4, |
| 626 | (struct phy_cmd[]){ /* config */ |
| 627 | /* Reset and configure the PHY */ |
| 628 | {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL}, |
| 629 | {MIIM_88E1111_PHY_EXT_SR, 0x848f, |
| 630 | &mii_m88e1111s_setmode_sr}, |
| 631 | /* Delay RGMII TX and RX */ |
| 632 | {MIIM_88E1111_PHY_EXT_CR, 0x0cd2, |
| 633 | &mii_m88e1111s_setmode_cr}, |
| 634 | {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL}, |
| 635 | {MIIM_ANAR, MIIM_ANAR_INIT, NULL}, |
| 636 | {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL}, |
| 637 | {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init}, |
| 638 | {miim_end,} |
| 639 | }, |
| 640 | (struct phy_cmd[]){ /* startup */ |
| 641 | /* Status is read once to clear old link state */ |
| 642 | {MIIM_STATUS, miim_read, NULL}, |
| 643 | /* Auto-negotiate */ |
| 644 | {MIIM_STATUS, miim_read, &mii_parse_sr}, |
| 645 | /* Read the status */ |
| 646 | {MIIM_88E1011_PHY_STATUS, miim_read, |
| 647 | &mii_parse_88E1011_psr}, |
| 648 | {miim_end,} |
| 649 | }, |
| 650 | (struct phy_cmd[]){ /* shutdown */ |
| 651 | {miim_end,} |
| 652 | }, |
| 653 | }; |
| 654 | |
| 655 | /* a generic flavor. */ |
| 656 | static struct phy_info phy_info_generic = { |
| 657 | 0, |
| 658 | "Unknown/Generic PHY", |
| 659 | 32, |
| 660 | (struct phy_cmd[]){ /* config */ |
Mike Frysinger | d63ee71 | 2010-12-23 15:40:12 -0500 | [diff] [blame] | 661 | {MII_BMCR, BMCR_RESET, NULL}, |
| 662 | {MII_BMCR, BMCR_ANENABLE | BMCR_ANRESTART, NULL}, |
Thomas Chou | 7bb1b9b | 2010-04-20 12:49:52 +0800 | [diff] [blame] | 663 | {miim_end,} |
| 664 | }, |
| 665 | (struct phy_cmd[]){ /* startup */ |
Mike Frysinger | d63ee71 | 2010-12-23 15:40:12 -0500 | [diff] [blame] | 666 | {MII_BMSR, miim_read, NULL}, |
| 667 | {MII_BMSR, miim_read, &mii_parse_sr}, |
Thomas Chou | 7bb1b9b | 2010-04-20 12:49:52 +0800 | [diff] [blame] | 668 | {miim_end,} |
| 669 | }, |
| 670 | (struct phy_cmd[]){ /* shutdown */ |
| 671 | {miim_end,} |
| 672 | } |
| 673 | }; |
| 674 | |
| 675 | static struct phy_info *phy_info[] = { |
| 676 | &phy_info_M88E1111S, |
| 677 | NULL |
| 678 | }; |
| 679 | |
| 680 | /* Grab the identifier of the device's PHY, and search through |
| 681 | * all of the known PHYs to see if one matches. If so, return |
| 682 | * it, if not, return NULL |
| 683 | */ |
| 684 | static struct phy_info *get_phy_info(struct eth_device *dev) |
| 685 | { |
| 686 | struct altera_tse_priv *priv = (struct altera_tse_priv *)dev->priv; |
| 687 | uint phy_reg, phy_ID; |
| 688 | int i; |
| 689 | struct phy_info *theInfo = NULL; |
| 690 | |
| 691 | /* Grab the bits from PHYIR1, and put them in the upper half */ |
| 692 | phy_reg = tse_mdio_read(priv, MIIM_PHYIR1); |
| 693 | phy_ID = (phy_reg & 0xffff) << 16; |
| 694 | |
| 695 | /* Grab the bits from PHYIR2, and put them in the lower half */ |
| 696 | phy_reg = tse_mdio_read(priv, MIIM_PHYIR2); |
| 697 | phy_ID |= (phy_reg & 0xffff); |
| 698 | |
| 699 | /* loop through all the known PHY types, and find one that */ |
| 700 | /* matches the ID we read from the PHY. */ |
| 701 | for (i = 0; phy_info[i]; i++) { |
| 702 | if (phy_info[i]->id == (phy_ID >> phy_info[i]->shift)) { |
| 703 | theInfo = phy_info[i]; |
| 704 | break; |
| 705 | } |
| 706 | } |
| 707 | |
| 708 | if (theInfo == NULL) { |
| 709 | theInfo = &phy_info_generic; |
| 710 | debug("%s: No support for PHY id %x; assuming generic\n", |
| 711 | dev->name, phy_ID); |
| 712 | } else |
| 713 | debug("%s: PHY is %s (%x)\n", dev->name, theInfo->name, phy_ID); |
| 714 | |
| 715 | return theInfo; |
| 716 | } |
| 717 | |
| 718 | /* Execute the given series of commands on the given device's |
| 719 | * PHY, running functions as necessary |
| 720 | */ |
| 721 | static void phy_run_commands(struct altera_tse_priv *priv, struct phy_cmd *cmd) |
| 722 | { |
| 723 | int i; |
| 724 | uint result; |
| 725 | |
| 726 | for (i = 0; cmd->mii_reg != miim_end; i++) { |
| 727 | if (cmd->mii_data == miim_read) { |
| 728 | result = tse_mdio_read(priv, cmd->mii_reg); |
| 729 | |
| 730 | if (cmd->funct != NULL) |
| 731 | (*(cmd->funct)) (result, priv); |
| 732 | |
| 733 | } else { |
| 734 | if (cmd->funct != NULL) |
| 735 | result = (*(cmd->funct)) (cmd->mii_reg, priv); |
| 736 | else |
| 737 | result = cmd->mii_data; |
| 738 | |
| 739 | tse_mdio_write(priv, cmd->mii_reg, result); |
| 740 | |
| 741 | } |
| 742 | cmd++; |
| 743 | } |
| 744 | } |
| 745 | |
| 746 | /* Phy init code */ |
| 747 | static int init_phy(struct eth_device *dev) |
| 748 | { |
| 749 | struct altera_tse_priv *priv = (struct altera_tse_priv *)dev->priv; |
| 750 | struct phy_info *curphy; |
| 751 | |
| 752 | /* Get the cmd structure corresponding to the attached |
| 753 | * PHY */ |
| 754 | curphy = get_phy_info(dev); |
| 755 | |
| 756 | if (curphy == NULL) { |
| 757 | priv->phyinfo = NULL; |
| 758 | debug("%s: No PHY found\n", dev->name); |
| 759 | |
| 760 | return 0; |
| 761 | } else |
| 762 | debug("%s found\n", curphy->name); |
| 763 | priv->phyinfo = curphy; |
| 764 | |
| 765 | phy_run_commands(priv, priv->phyinfo->config); |
| 766 | |
| 767 | return 1; |
| 768 | } |
| 769 | |
Thomas Chou | 53d0150 | 2010-04-27 20:15:10 +0800 | [diff] [blame] | 770 | static int tse_set_mac_address(struct eth_device *dev) |
| 771 | { |
| 772 | struct altera_tse_priv *priv = dev->priv; |
| 773 | volatile struct alt_tse_mac *mac_dev = priv->mac_dev; |
| 774 | |
| 775 | debug("Setting MAC address to 0x%02x%02x%02x%02x%02x%02x\n", |
| 776 | dev->enetaddr[5], dev->enetaddr[4], |
| 777 | dev->enetaddr[3], dev->enetaddr[2], |
| 778 | dev->enetaddr[1], dev->enetaddr[0]); |
| 779 | mac_dev->mac_addr_0 = ((dev->enetaddr[3]) << 24 | |
| 780 | (dev->enetaddr[2]) << 16 | |
| 781 | (dev->enetaddr[1]) << 8 | (dev->enetaddr[0])); |
| 782 | |
| 783 | mac_dev->mac_addr_1 = ((dev->enetaddr[5] << 8 | |
| 784 | (dev->enetaddr[4])) & 0xFFFF); |
| 785 | |
| 786 | /* Set the MAC address */ |
| 787 | mac_dev->supp_mac_addr_0_0 = mac_dev->mac_addr_0; |
| 788 | mac_dev->supp_mac_addr_0_1 = mac_dev->mac_addr_1; |
| 789 | |
| 790 | /* Set the MAC address */ |
| 791 | mac_dev->supp_mac_addr_1_0 = mac_dev->mac_addr_0; |
| 792 | mac_dev->supp_mac_addr_1_1 = mac_dev->mac_addr_1; |
| 793 | |
| 794 | /* Set the MAC address */ |
| 795 | mac_dev->supp_mac_addr_2_0 = mac_dev->mac_addr_0; |
| 796 | mac_dev->supp_mac_addr_2_1 = mac_dev->mac_addr_1; |
| 797 | |
| 798 | /* Set the MAC address */ |
| 799 | mac_dev->supp_mac_addr_3_0 = mac_dev->mac_addr_0; |
| 800 | mac_dev->supp_mac_addr_3_1 = mac_dev->mac_addr_1; |
| 801 | return 0; |
| 802 | } |
| 803 | |
Thomas Chou | 7bb1b9b | 2010-04-20 12:49:52 +0800 | [diff] [blame] | 804 | static int tse_eth_init(struct eth_device *dev, bd_t * bd) |
| 805 | { |
| 806 | int dat; |
| 807 | struct altera_tse_priv *priv = dev->priv; |
| 808 | volatile struct alt_tse_mac *mac_dev = priv->mac_dev; |
| 809 | volatile struct alt_sgdma_descriptor *tx_desc = priv->tx_desc; |
| 810 | volatile struct alt_sgdma_descriptor *rx_desc = priv->rx_desc; |
| 811 | volatile struct alt_sgdma_descriptor *rx_desc_cur = |
| 812 | (volatile struct alt_sgdma_descriptor *)&rx_desc[0]; |
| 813 | |
| 814 | /* stop controller */ |
| 815 | debug("Reseting TSE & SGDMAs\n"); |
| 816 | tse_eth_reset(dev); |
| 817 | |
| 818 | /* start the phy */ |
| 819 | debug("Configuring PHY\n"); |
| 820 | phy_run_commands(priv, priv->phyinfo->startup); |
| 821 | |
| 822 | /* need to create sgdma */ |
| 823 | debug("Configuring tx desc\n"); |
| 824 | alt_sgdma_construct_descriptor_burst( |
| 825 | (volatile struct alt_sgdma_descriptor *)&tx_desc[0], |
| 826 | (volatile struct alt_sgdma_descriptor *)&tx_desc[1], |
| 827 | (unsigned int *)NULL, /* read addr */ |
| 828 | (unsigned int *)0, |
| 829 | 0, /* length or EOP ,will change for each tx */ |
| 830 | 0x1, /* gen eop */ |
| 831 | 0x0, /* read fixed */ |
| 832 | 0x1, /* write fixed or sop */ |
| 833 | 0x0, /* read burst */ |
| 834 | 0x0, /* write burst */ |
| 835 | 0x0 /* channel */ |
| 836 | ); |
| 837 | debug("Configuring rx desc\n"); |
Stefan Kristiansson | ea45ea2 | 2011-11-04 02:38:07 +0000 | [diff] [blame] | 838 | flush_dcache_range((unsigned long)(NetRxPackets[0]), |
| 839 | (unsigned long)(NetRxPackets[0]) + PKTSIZE_ALIGN); |
Thomas Chou | 7bb1b9b | 2010-04-20 12:49:52 +0800 | [diff] [blame] | 840 | alt_sgdma_construct_descriptor_burst( |
| 841 | (volatile struct alt_sgdma_descriptor *)&rx_desc[0], |
| 842 | (volatile struct alt_sgdma_descriptor *)&rx_desc[1], |
| 843 | (unsigned int)0x0, /* read addr */ |
| 844 | (unsigned int *)NetRxPackets[0], |
| 845 | 0x0, /* length or EOP */ |
| 846 | 0x0, /* gen eop */ |
| 847 | 0x0, /* read fixed */ |
| 848 | 0x0, /* write fixed or sop */ |
| 849 | 0x0, /* read burst */ |
| 850 | 0x0, /* write burst */ |
| 851 | 0x0 /* channel */ |
| 852 | ); |
| 853 | /* start rx async transfer */ |
| 854 | debug("Starting rx sgdma\n"); |
| 855 | alt_sgdma_do_async_transfer(priv->sgdma_rx, rx_desc_cur); |
| 856 | |
| 857 | /* start TSE */ |
| 858 | debug("Configuring TSE Mac\n"); |
| 859 | /* Initialize MAC registers */ |
| 860 | mac_dev->max_frame_length = PKTSIZE_ALIGN; |
| 861 | mac_dev->rx_almost_empty_threshold = 8; |
| 862 | mac_dev->rx_almost_full_threshold = 8; |
| 863 | mac_dev->tx_almost_empty_threshold = 8; |
| 864 | mac_dev->tx_almost_full_threshold = 3; |
| 865 | mac_dev->tx_sel_empty_threshold = |
| 866 | CONFIG_SYS_ALTERA_TSE_TX_FIFO - 16; |
| 867 | mac_dev->tx_sel_full_threshold = 0; |
| 868 | mac_dev->rx_sel_empty_threshold = |
| 869 | CONFIG_SYS_ALTERA_TSE_TX_FIFO - 16; |
| 870 | mac_dev->rx_sel_full_threshold = 0; |
| 871 | |
| 872 | /* NO Shift */ |
| 873 | mac_dev->rx_cmd_stat.bits.rx_shift16 = 0; |
| 874 | mac_dev->tx_cmd_stat.bits.tx_shift16 = 0; |
| 875 | |
| 876 | /* enable MAC */ |
| 877 | dat = 0; |
| 878 | dat = ALTERA_TSE_CMD_TX_ENA_MSK | ALTERA_TSE_CMD_RX_ENA_MSK; |
| 879 | |
| 880 | mac_dev->command_config.image = dat; |
| 881 | |
Thomas Chou | 7bb1b9b | 2010-04-20 12:49:52 +0800 | [diff] [blame] | 882 | /* configure the TSE core */ |
| 883 | /* -- output clocks, */ |
| 884 | /* -- and later config stuff for SGMII */ |
| 885 | if (priv->link) { |
| 886 | debug("Adjusting TSE to link speed\n"); |
| 887 | tse_adjust_link(priv); |
| 888 | } |
| 889 | |
| 890 | return priv->link ? 0 : -1; |
| 891 | } |
| 892 | |
| 893 | /* TSE init code */ |
| 894 | int altera_tse_initialize(u8 dev_num, int mac_base, |
Joachim Foerster | cb0ddaf | 2011-10-17 05:24:44 +0000 | [diff] [blame] | 895 | int sgdma_rx_base, int sgdma_tx_base, |
| 896 | u32 sgdma_desc_base, u32 sgdma_desc_size) |
Thomas Chou | 7bb1b9b | 2010-04-20 12:49:52 +0800 | [diff] [blame] | 897 | { |
| 898 | struct altera_tse_priv *priv; |
| 899 | struct eth_device *dev; |
| 900 | struct alt_sgdma_descriptor *rx_desc; |
| 901 | struct alt_sgdma_descriptor *tx_desc; |
| 902 | unsigned long dma_handle; |
| 903 | |
| 904 | dev = (struct eth_device *)malloc(sizeof *dev); |
| 905 | |
| 906 | if (NULL == dev) |
| 907 | return 0; |
| 908 | |
| 909 | memset(dev, 0, sizeof *dev); |
| 910 | |
| 911 | priv = malloc(sizeof(*priv)); |
| 912 | |
| 913 | if (!priv) { |
| 914 | free(dev); |
| 915 | return 0; |
| 916 | } |
Joachim Foerster | cb0ddaf | 2011-10-17 05:24:44 +0000 | [diff] [blame] | 917 | if (sgdma_desc_size) { |
| 918 | if (sgdma_desc_size < (sizeof(*tx_desc) * (3 + PKTBUFSRX))) { |
| 919 | printf("ALTERA_TSE-%hu: " |
| 920 | "descriptor memory is too small\n", dev_num); |
| 921 | free(priv); |
| 922 | free(dev); |
| 923 | return 0; |
| 924 | } |
| 925 | tx_desc = (struct alt_sgdma_descriptor *)sgdma_desc_base; |
| 926 | } else { |
| 927 | tx_desc = dma_alloc_coherent(sizeof(*tx_desc) * (3 + PKTBUFSRX), |
| 928 | &dma_handle); |
| 929 | } |
| 930 | |
Thomas Chou | 7bb1b9b | 2010-04-20 12:49:52 +0800 | [diff] [blame] | 931 | rx_desc = tx_desc + 2; |
| 932 | debug("tx desc: address = 0x%x\n", (unsigned int)tx_desc); |
| 933 | debug("rx desc: address = 0x%x\n", (unsigned int)rx_desc); |
| 934 | |
| 935 | if (!tx_desc) { |
| 936 | free(priv); |
| 937 | free(dev); |
| 938 | return 0; |
| 939 | } |
| 940 | memset(rx_desc, 0, (sizeof *rx_desc) * (PKTBUFSRX + 1)); |
| 941 | memset(tx_desc, 0, (sizeof *tx_desc) * 2); |
| 942 | |
| 943 | /* initialize tse priv */ |
| 944 | priv->mac_dev = (volatile struct alt_tse_mac *)mac_base; |
| 945 | priv->sgdma_rx = (volatile struct alt_sgdma_registers *)sgdma_rx_base; |
| 946 | priv->sgdma_tx = (volatile struct alt_sgdma_registers *)sgdma_tx_base; |
| 947 | priv->phyaddr = CONFIG_SYS_ALTERA_TSE_PHY_ADDR; |
| 948 | priv->flags = CONFIG_SYS_ALTERA_TSE_FLAGS; |
| 949 | priv->rx_desc = rx_desc; |
| 950 | priv->tx_desc = tx_desc; |
| 951 | |
| 952 | /* init eth structure */ |
| 953 | dev->priv = priv; |
| 954 | dev->init = tse_eth_init; |
| 955 | dev->halt = tse_eth_halt; |
| 956 | dev->send = tse_eth_send; |
| 957 | dev->recv = tse_eth_rx; |
Thomas Chou | 53d0150 | 2010-04-27 20:15:10 +0800 | [diff] [blame] | 958 | dev->write_hwaddr = tse_set_mac_address; |
Thomas Chou | 7bb1b9b | 2010-04-20 12:49:52 +0800 | [diff] [blame] | 959 | sprintf(dev->name, "%s-%hu", "ALTERA_TSE", dev_num); |
| 960 | |
| 961 | eth_register(dev); |
| 962 | |
| 963 | #if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) && !defined(BITBANGMII) |
| 964 | miiphy_register(dev->name, altera_tse_miiphy_read, |
| 965 | altera_tse_miiphy_write); |
| 966 | #endif |
| 967 | |
| 968 | init_phy(dev); |
| 969 | |
| 970 | return 1; |
| 971 | } |